z conveyor used for sale

cutting diameter: 105 mm saw band length: 1140 x 13 x 0,65 mm cutting width: 100/100x105 mm capacity 60 degrees: round: mm capacity 45 degrees: flat: 55 x 55 mm capacity 45 degrees: round: 60 mm total power requirement: 0,18 kW weight of the machine ca.: 18 kg dimensions of the machine ca.: ca.400 x 300 x 350 mm We must ask you to request machines from us on a daily basis in the near future. Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. Gear drive, automatic belt tension, electronically adjustable Belt speed from 20 to 100 m / min Due to the light aluminum housing, the machine is very light and therefore good mobile use. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 185 mm saw band length: 2.080 x 20 x 0,90 mm cutting width: 100x185 mm connected load frequency: 230 V band speed: 35 und 70 stufenlos m/min mitre joint 90° (angle-iron till): 60 ° total power requirement: 2,35 KW weight of the machine ca.: 195 kg dimensions of the machine ca.: 1280 x 550 x 1480 mm We must ask you to request machines from us on a daily basis in the near future. Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. An inexpensive and powerful band saw for sporadic workshop use The Zimmer Z185 / R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After the cut, the machine stops due to a safety limit switch. The lowering is continuously adjustable via a hydraulic system. The manual lifting of the saw arm after the cut can - on any Position. The saw ...

Joint burning machine Make Zechni Model Cimatic Year 1970? Width 490 mm Thickness up to 80 mm thickness Details Adjustable temp, pneumatic Available direct

Scoring circular saw blade, scoring circular saw blades -two-part, adjustable: 120 x 2.8-3.6 mm -for: Scoring sheet materials, laminates, ... -carbide-tipped -Weight: 0.3 kg

Mobile multi-format machine for filling and closing vials and bottles with variable closing systems.. - Pick & Place Station Presskappe inkl. entsprechende RNA-Fördereinheit ab Vibrator (Schwingförderer) - Container size: up to 250 ml. Machine incl. feeding turntable, dosing system FLEXICON, capping system, PLC SIEMENS Simatic etc

Scoring circular saw blade, scoring circular saw blades -two-part, adjustable: 120 x 2.8-3.6 mm -for: Scoring sheet materials, laminates, ... -carbide-tipped -Weight: 0.3 kg

Scoring circular saw blade, scoring circular saw blades -two-part, adjustable: 120 x 2.8-3.6 mm -for: Scoring sheet materials, laminates, ... -carbide-tipped -Weight: 0.3 kg

Safety switch, safety switch, TZ -Type: AZ 16 ZVK-M16 -Protection class: IP 67 -Number: 34x available -Price: per piece -Dimensions: 90/51/H30 mm -Weight: 0.1 kg

Tapping machine, pipe thread cutter -for: pipe size max. 2 inches -Cutting jaws: 1/2 , 3/4, 1 , 1 1/4, 1 1/2 -Dimensions: 510/360 / H240 mm -Weight: 64 kg

GEBRAUCHTER MIWE BACKOFEN . DER PREIS BEINHALTET NICHT DIE MONTAGE GAS

Conveyor belt, Fabr. Zeva, rod tape 350 mm

Thread cutting machine, pipe thread cutter -for: Pipe size max. 2 inches -Cutting jaws: 1/4 - 2 -Dimensions: 510/360/H240 mm -Weight: 64 kg

Tie rod cylinders, hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston: Ø approx. 50 mm -Piston rod: Ø 25 mm -Stroke: 190 mm -Dimensions: 75/75/H550 mm -Weight: 8.4 kg

Tie rod cylinder, hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston: Ø approx. 35 mm -Piston rod: Ø 20 mm -Stroke: 40 mm -Dimensions: 65/65/H380 mm -Weight: 3.75 kg

Mold conveyor belt from Zela grease machine

Feeding table/feeding belt for bread sticks to the circular knife machine, Fabr. Herlitzius

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 200 rpm -Power: 0.4 kW -Construction: B3 -Diameter shaft: Ø 28 mm -Protection class: IP 44 -Height shaft axis: 64 mm -Price: per piece -Number: 2x available -Dimensions: 430/172/H225 mm -Weight: 19 kg

Hand pitter for plums and plums, with right- and left-handed handle

Fan - large fan blower, Fabr. Ziehl-Abbeg

COVER LABELING SYSTEM (Zweckform with Schleuter label dispenser) Age : ca. 1990 Performance: 100 cups/lids per minute Equipment / Additional information: Consists of: - Stacker - Labeling unit - Stapler

Sprockets, triplex sprocket, sprocket -Sprocket pitch Triplex: 1 1/4 x 3/4 -Number of teeth: 45 teeth -Diameter: 470 mm -Total width: 140 mm -Tooth width: 18.5 mm -Hole: Ø 125 mm -Number: 4x sprockets available -Price: per piece -Weight: 103 kg / 106 kg -other sprockets in stock

Geared motor, electric motor, three-phase motor -Speed: 19 rpm -Power: 0.045 kW -Design: B5 angle -Shaft diameter: 12 mm -Protection class: IP 54 -Price: per piece -Quantity: 1 available -Dimensions: 225/140/H120 mm -Weight: 3.7 kg

Electric motor, three-phase motor -Power: 0.48/0.3 kW -Speed: 700/1400 rpm at 50Hz -Shaft diameter: 14 mm -Construction: B5 -Protection class: IP 44 -Price: per piece -Number: 2x available -Dimensions: 315/150/H195 mm -Weight: 11.9 kg

Repair service Reparatur Service Part: Axle amplifier type MR-S11-100-Z33 Servo Drive For MAZAK MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Gear motor, electric motor, three-phase motor -Speed: 84 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: 25 mm -Protection class: IP 33/E -Dimensions: 350/170/H180 mm -Weight: 16.2 kg

Gear motor, electric motor -Speed: 125 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 22 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 365/160/H200 mm -Weight: 12.8 kg

Repair service Reparatur Service Part: Axle amplifier type MR-S12-100B-Z33 Servo Drive For MAZAK MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Gear motor, electric motor -Speed: 13 rpm -Power: 0.11 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 33 -Number: 1x geared motors available -Price: per piece -Dimensions: 380/170/H180 mm -Weight: 17.5 kg

Gear motor, electric motor -Speed: 63 rpm -Power: 0.37 kW -Construction: B5 -Diameter shaft: Ø 22 mm -Protection class: IP 44 -Price: per piece -Number: 4x available -Dimensions: 370/140/H195 mm -Weight: 12.8 kg

Refrigerated compressed air dryer from 2004, complete (closed model) 1 available 1100 m3/h, 12 bar Manufacturer: Arctic Star Zander Model No.: AS1100 Type: Refrigerated compressed air dryer Serial Number: 2794660001 Volumetric flow rate [m3/h]: 1,800 Pressure inlet [bar]: 12 Power connection [KW]: 3 Year of construction: 2004 Weight [kg]: 208 Dimensions LxWxH [cm]: 92x97x112

Gear motor, electric motor, electric gear motor -Power: 0.37 kW -Diameter shaft: 22 mm -Speed shaft: 100 rpm -Construction: B5 -Protection class: IP 54 -Number: 1x engine available -Price: per piece -Dimensions: 370/140/H200 mm -Weight: 12 kg

Gear motor, electric motor -Speed: 125 rpm -Power: 0.6 kW -Construction: B5 -Diameter shaft: Ø 24 mm -Protection class: IP 44 -Dimensions: 365/160/H215 mm -Weight: 19 kg

Gear motor, electric motor, electric gear motor -Speed: 304 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 44 -Dimensions: 380/200/H190 mm -Weight: 15.7 kg

Gear motor, electric motor -Speed: 63 rpm -Power: 0.55 kW -Construction: B5 -Diameter shaft: Ø 28 mm -Protection class: IP 44 -Number: 1x geared motors available -Price: per piece -Weight: 19 kg

geared motor, electric motor -Speed: 160 rpm -Power: 0.55 kW -Design: B5 -Shaft diameter: Ø 28 mm -Protection class: IP 44 -Number: 1x motor available Price: per piece -Dimensions: 470/160/H200 mm -Weight: 22 kg

Gear motor, electric motor -Speed: 71 rpm -Power: 1.1 kW -Construction: B3 -Diameter shaft: Ø 25 mm -IP protection -Number: 1x motors available -Price: per piece -Dimensions: 470/200/H230 mm -Weight: 29 kg

Gear motor, electric motor, three-phase motor -Speeds: 80 rpm -Power: 0.12 kW -Construction: B3 -Diameter shaft: Ø 22 mm -Protection class: IP 54 -Price: per piece -Number: 12x available -Dimensions: 350/160/ H200 mm -Weight: 10.1 kg

Gear motor, electric motor, three-phase motor -Speed: 15/60 rpm -Power: 0.1/0.45 kW -Construction: B3 -Diameter shaft: 25 mm -Protection class: IP 54 -Dimensions: 410/210/H190 mm -Weight: 24 kg

Geared motor, electric motor, electric geared motor -Motor power: 0.25 kW -Speed: 25 rpm -Design: B3 -Drive shaft Shaft: Ø 24 mm -Quantity: 1 piece, motor included -Dimensions: 400/175/H215 mm -Weight: 16 kg

Gear motor, electric motor -Speed: 63 rpm -Power: 0.55 kW -Construction: B5 -Diameter shaft: Ø 22 mm -Protection class: IP 44 -Number: 10x gear motors available -Price: per piece -Weight: 19 kg

Geared motor, electric motor, three-phase motor -Speed: 64 rpm -Power: 2.2 kW -Design: B3 -Shaft diameter: Ø 60 mm -Protection class: IP 33 -Dimensions: 680/295/H420 mm -Weight: 103 kg

Gear motor, electric motor -Speed: 15 rpm -Power: 0.18 kW -Construction: B3 -Brake -Diameter shaft: Ø 25 mm -Protection class: IP 33 -Dimensions: 450/200/H200 mm -Weight: 23 kg

Gear motor, electric motor, three-phase motor -Speed: 80 rpm -Power: 11 kW -Construction: B5 -Shaft diameter: Ø 75 mm -Protection class: IP 44 -Dimensions: 935/700/H520 mm -Weight: 178 kg

Gear motor, electric motor -Speed: 40 rpm -Power: 9 kW -Construction: B3 -Diameter shaft: Ø 80 mm -Protection class: IP 33 -Dimensions: 1000/385/550 mm -Weight: 260 kg

Accessory trolley for welding table, 3D welding and assembly tables -with: shelves for the accessories -Number: 1x tables available -Price: per piece -Dimensions: 1060/650/H1260 mm -Weight: 52 kg

Gear motor, electric motor, three-phase motor -Speed: 40 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: Ø 22 mm 1x with short shaft -Protection class: IP 54 -Price: per piece -Number: 2x available -Dimensions: 350/160/H200 mm -Weight: 12.2 kg

Gear motor, electric motor, electric gear motor -Speed: 105 rpm -Power: 1.5 kW -Construction: B5 -Diameter shaft: 32 mm -Protection class: IP 44 -Number: 3x engines available -Price: per piece -Dimensions: 520/200/H225 mm -Weight: 32 kg

Gear motor, electric motor -Speed: 54 rpm -Power: 0.37 kW -Construction: B5 -Diameter shaft: Ø 28 mm -Protection class: IP 44 -Dimensions: 395/185/H185 mm -Weight: 16.5 kg

Gear motor, electric motor -Speed: 57.5 rpm -Power: 0.37 kW -Construction: B3 angle -Diameter hollow shaft: Ø 24 mm -IP protection -Number: 2x motors available -Price: per piece -Dimensions: 345/190/H215 mm -Weight: 10.4 kg

Geared motor, electric motor, electric geared motor -Speed: 14 rpm -Power: 0.37 kW -Design: B5 angle -Hollow shaft diameter: 28 mm Price: per piece -Quantity: 2 available -Protection class: IP 55 -Dimensions: 420/183/H210 mm -Weight: 16 kg