We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,628 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
new
cutting diameter: 185 mm saw band length: 2.085 x 20 x 0,90 mm table height: 915 mm band speed: 30 - 75 m/min connected load frequency: 230 V capacity 90 degrees: round: 185 mm capacity 90 degrees: square: 150 mm capacity 90 degrees: flat: 220 x 150 mm total power requirement: 2,35 kW weight of the machine ca.: 195 kg dimensions of the machine ca.: 550 x 1.280 x 1.740 mm mm Metal band saw with stepless electronic speed control and automatic lowering. • Selector switch for hydraulically controlled or manual band arm lowering • Saw arm can be swiveled up to 60 ° to the right • Quick-action vice • Belt guide with 8 ball bearings • Hydraulic saw band tension with tension pressure display and band break shutdown •Incl. Coolant system •Incl. Machine cabinet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Suitable für syrup, connected load: 20kW, controls panel: Siemens SIMATIC HMI, length: 3000mm, width: 2500mm, height: 2500mm, weight: 6.5t, with capper and full documentation.
used
Max. output: 1400 bottle/h, PET can lid format set: 100/127mm, can diameter: 147.4/182mm, pitch diameter: 530, operational hours counter: ca. 500h, with documentation.
used
Rotational speed: 900/min, connected load: 2.7kVA, weight: 3.98t, with documentation.
used
1 of used Kisters filmstation for potential use as training module. Ex a Kisters 197/100 D. Can be supplied with ancillaries such as vacuum fan, film-reel spindle and film brake, etc. Modules for various KHS/Kisters/ZVT machine types in stock!
used
Pressure: 2596Pa, density: 1.2kg/m³, rotational speed: 2880/min, operational temperature: 20-80°C, weight: 105kg.
used
Palletizer ZECCHETTI • Year: 1999. • Speed: 28.000 bph – 1.5LT. • Interlayer system. • Pallet storage. • Safety protections.
used
used shredder / shredder Manufacturer: ZENO Type: ZTLL 1600 x 1600 Year of construction: 2018 Operating hours: approx. 400 Specifications: Drive power: 2 x 55 kW Sieve: 35 mm hexagonal Screen design: solid screen basket, reinforced with ribs, including sieve quick-change device Counter knife: with cutting gap adjustment Hopper: 1,075 mm high, without lid with maintenance door and level sensor (Sonar Bero) Transmission: Compact gearbox with torque cut-off Filling opening: 1,600 x 1,600 mm Rotor speed: approx. 80 - 120 rpm Rotor aircraft: 600 mm Rotor design: 4 rows (76 pieces) positive inserts 60 x 60 mm on tool holders Rotor bearing: Standing bearing Machine floor and slide bottom: grooved Weight: approx. 13,400 kg Universally applicable shredder for a wide variety of materials The ZTLL shredder is the result of more than 35 years of kn ...
used
Without software, documentation available.
used
Without documentation.
used
Board dimensions: 295x250mm.
used
Y-travel: 500mm, z-travel: 450mm, including measuring probes and documentation, software is faulty, machine cannot be started properly.
used
X-travel: 380mm, y-travel: 450mm, z-travel: 280mm, max. load: 410kg, probe: Renishaw PH1, length: 890mm, width: 840mm, height: 1370mm, weight: 360kg, with documentation, an inspection is possible.
used
X-travel: 400mm, y-travel: 500mm, z-travel: 300mm, max. workpiece weight: 50kg, resolution: u1=(3.4+L/200)µm, touch probe: PH6/TP2, software: U-Soft 9.04, operational hours: unknown, with documentation, without accessories, has been regularly maintained and calibrated.
used
Connected load: 460VA.
used
There are four identical ladders available, number of steps: 3x 5, max. step/platform load: 150/300kg, with railing.
used
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Precision universal cylindrical grinding machine make ZIERSCH & BALTRUSCHType URS 751Serial -No: 84119, year of construction 1984Technical specifications:Center height: 130 mmDistance between centers: 750 mmmax. workpiece diameter with new disc: 245 mmPermissible workpiece weight between the tips/in the chuck: 120/60 kgLONGITUDINAL SLIDEmax travel:900mmspeed hydr. infinitely variable: 0.05 - 5 m/minTravel per handwheel rotation Position 1/ 25.5 mm/ 10 mmGraduation mark of the handwheel position 0.1 mmReading Accuracy:0.01mmCROSS SLIDERapid feed and return: 40 mmManual adjustment: 54 mmTravel of one hand wheel turn: 1 mmgr. Insertion depth: 1.4 mm/Drm.Plunge feed: 0.05 - 10 mm/minGRINDING HEADSTOCK3 grinding spindle speeds: 1580, 1750, 1970 rpm.Coarse adjustment: 155 mmSwiveling of the grinding headstock:+ - 30°Drive power of the grinding headstock: 4 kWWORKHEADInfinitely variable speed: ...
used
Precision universal cylindrical grinding machine make ZIERSCH & BALTRUSCH type URS 750with internal grinding deviceMake -No: 220 built in 1976Technical specifications:Center height: 130 mmDistance between centers: 750 mmmax. workpiece diameter with new disc: 250 mmPermissible workpiece weight between the tips/in the chuck: 120/60 kgLONGITUDINAL SLIDEmax travel:900mmspeed hydr. infinitely variable: 0.05 - 6 m/minTravel per handwheel rotation position 1/ 25 mm/ 10 mmGraduation mark of the handwheel position 0.1 mmReading Accuracy:0.01mmCROSS SLIDERapid feed and return: 40 mmManual adjustment: 54 mmTravel of one hand wheel turn: 1 mmgr. Insertion depth: 1.4 mm/Drm.Plunge feed: 0.05 - 10 mm/minGRINDING HEADSTOCK3 grinding spindle speeds: 1580, 1750, 1970 rpm.Coarse adjustment: 155 mmSwiveling of the grinding headstock:+ - 30°Drive power of the grinding headstock: 4 kWWORKHEADInfinitely vari ...
used
Universal external cylindrical grinding machine make ZIERSCH & BALTRUSCHType URS 400 Ergonomy Masch. -No: 80052 built in 1981Technical specifications:Grinding length: 320 mmCenter height: 100 mmDistance between centers: 400 mmGrinding wheel size: 350 x 50 x 127 mmGrinding wheel speed: 1800, 1970, 2170 rpm.Pivotability of the grinding spindle head: 45 °Infeed of the grinding support: 0.001 - 0.025 mmPlunge grinding infeed: 0.05 - 10 mm / min.Swiveling of the table: 10 °Table speed stepless: 0.04 - 5.0 m / min.Drive power: 3.0 kWWeight about 1550 kgWith- Internal grinding device- Set of collets- cooling system- dresserused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries ...
used
Antique Universal Measuring Microscope Fabr. CARL ZEISS JENAbuilt around 1939Craft No. 1191used, in good and functional conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Tensile testing machine make ZWICK type 1281Fabr. -No: 26507 built in 1964Max. Press force: 2000/4000/6000 kpTest speed: 0m- 600 mm / minStroke of the working piston: 300 mmClamping distance: 0 - 400 mmClamping wedge surface: 60 x 20 mmPillar distance / clear width: 255/215 mmMax. Printing plate distance: 300 mmDiameter of the pressure plate: 136 mmMax. Bend length: 550 mmWidth of bending supports: 64 mmused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Tool presetting device make ZOLLER type H 4000Machine -No: FC II 4000/039, built in 1985Measuring range: 320 x 270 mmProjector diameter: 150 mmMagnification: 20 timesMeasuring system: Heidenhain LS 503 DOutside dimensions: 1490 x 650 x 1850 mmelec. Connection: 220 V / 50 HzWeight: 350 kgWith- Input unit type 6080- Tool holders ISA 50usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Tool presetting device make ZOLLER type H 4000 / H 4012/132Year of construction 1988Technical specifications:Turntable diameter: 750 mmNumber of tool holders: 4External dimensions approx: 2000 x 850 x 1700 mmWith- 2-axis digital display Zoller 6051- Profile projectorused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Hydraulic table-top press Fabr. VVB ZeulenrodaPressing capacity: 4 tTable size: 220 x 340 mmDischarge: 190 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Welding turning device make PROTARC-ZAAR type RB-ASV 1000Machine -No: 5540 built in 1988Technical specifications:Load capacity: 10 tRoll diameter: 400 mmRoll width: 110 mmNumber of roles: 2 eachExternal dimensions (driven part): 3500 x 900 x 900 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Item no. 5044: 1 gebr. Tool Presetting Device Fabr. ZOLLER, Type V 400 Z , Bauj. 2002
used
pressure: 63 t throat: - mm stroke: 16 - 125 mm max. distance table - ram: 417 mm ram adjustment: 70 mm no. of strokes: im Dauerlauf 80 Hub/min table surface area: 800 x 630 mm ram surface: 500 x 400 mm clamping plate thickness: 70 mm total power requirement: 6 kW weight of the machine ca.: 5,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
turning diameter over bed: 660 mm turning diameter over slide rest: 420 mm turning length: 1500 (2m, 3m, 4m, 5m, 6m) mm turning dia. in gap: 850 mm bed width: 560 mm spindle nose: 11 spindle bore: 103 mm transmission ratio: 3 spindle turning speed - stepless: 9-55, 37-220, 220-1320 U/min thread: 76 Stufen metrical thread cutting: 0,5 - 180 mm thread - inch: 60 - 1/6 inch. thread - module: 0,125 - 45 Whitworth-thread: 240 - 2/3 DP number of feeds: 150 mm/U longitudinal feeds:: 0,039 - 18 mm/U face feeds: 0,02 - 9 mm/U face slide travel: 410 mm upper slide-adjustment: 150 mm diameter of quill: 105 mm : MK 6 quill stroke: 225 mm total power requirement: 15 kW weight of the machine ca.: 4170 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these ...
new
turning diameter over bed: 760 mm turning diameter over slide rest: 520 mm turning length: 4000 (1,5m,2m,3m,5m, 6m) mm turning dia. in gap: 950 mm bed width: 560 mm spindle nose: 11 spindle bore: 132 mm transmission ratio: 3 spindle turning speed - stepless: 12,5-100, 50-415,150-1250 U/min thread: 76 Stufen metrical thread cutting: 0,5 - 180 mm thread - inch: 60 - 1/6 inch. thread - module: 0,125 - 45 Whitworth-thread: 240 - 2/3 DP number of feeds: 150 mm/U rapid traverse longitudinal: 3800 mm/min longitudinal feeds:: 0,039 - 18 mm/U face feeds: 0,02 - 9 mm/U face slide travel: 410 mm upper slide-adjustment: 150 mm rapid traverse of cross-rail supports: 1900 mm/min diameter of quill: 105 mm : MK 6 quill stroke: 225 mm total power requirement: 15 (18,5) kW weight of the machine ca.: 5800 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. ...
new
turning diameter over bed: 660 mm turning diameter over slide rest: 420 mm turning length: 4000 (1,5m,2m,3m,5m, 6m) mm turning dia. in gap: 850 mm bed width: 560 mm spindle nose: 11 spindle bore: 103 mm transmission ratio: 3 spindle turning speed - stepless: 9-55, 37-220, 220-1320 U/min thread: 76 Stufen metrical thread cutting: 0,5 - 180 mm thread - inch: 60 - 1/6 inch. thread - module: 0,125 - 45 Whitworth-thread: 240 - 2/3 DP number of feeds: 150 mm/U longitudinal feeds:: 0,039 - 18 mm/U face feeds: 0,02 - 9 mm/U face slide travel: 410 mm upper slide-adjustment: 150 mm diameter of quill: 105 mm : MK 6 quill stroke: 225 mm total power requirement: 15 kW weight of the machine ca.: 5500 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these ...
new
turning diameter over bed: 860 mm turning diameter over slide rest: 620 mm turning length: 4000 (1,5m,2m,3m,5m, 6m) mm turning dia. in gap: 1050 mm bed width: 560 mm spindle nose: 11 spindle bore: 132 mm transmission ratio: 3 spindle turning speed - stepless: 12,5-100, 50-415,150-1250 U/min thread: 76 Stufen metrical thread cutting: 0,5 - 90 mm thread - inch: 60 - 1/3 inch. thread - module: 0,125 - 22,5 Whitworth-thread: 240 - 1 1/3 DP number of feeds: 150 mm/U rapid traverse longitudinal: 3800 mm/min longitudinal feeds:: 0,039 - 18 mm/U face feeds: 0,02 - 9 mm/U face slide travel: 432 mm upper slide-adjustment: 150 mm rapid traverse of cross-rail supports: 1900 mm/min diameter of quill: 105 mm : MK 6 quill stroke: 225 mm total power requirement: 18,5 kW weight of the machine ca.: 6300 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. ...
used
Ziersch & Baltrusch URS400 Ergonomy Year of construction: 1981 Tip height: 100mm Center width: 400mm Grindable length - max. table stroke: 320mm workpiece Drm: 198mm Speed workpiece headstock: 90-900rpm Speed grinding spindle: 1.800-1.970-2.173U/min Largest grinding wheels Drm: 350mm Smallest grinding wheels Drm: 250mm Width grinding wheel max: 50mm Bore grinding wheel: 127mm Dimensions: 1,5x1,3x1,65m Weight: approx. 1.6to Micrometer stop 1 revolution of the micrometer spindle: 0.2mm 1 tick mark of micrometer spindle: 0.01mm At the machine, the guides were renewed, the table was renewed and all bearings were replaced!
used
Skin area: 345 x 495 mm Part size: Max. approx. 120 mm Carton size: 345 x 495 mm Film width: 390 mm Including roller punch / cylinder punching machine Illig ZSM60 Contact details for ordering SKIN foil and cardboard available. Prior sale reserved - errors possible. Internal Reference Number: D-1149
used
PONAR ŻYWIEC UT 090 H injection moulding machine was built in Poland in 2007. The machine is used in processing thermoplastics using the injection moulding method. The hydraulic mould closing unit, operating with a closing force of 90 tons, is protected with significantly offset fixed and movable covers facilitating the installation of complex moulds with their accessories. The mounted moulds can be a minimum of 225 mm high, while the mould clamping plates have dimensions (L x W) of 615 x 615 mm. A MOOG-BUHL CNC control unit enables the machine to operate in any desired manual or automatic mode, as well as setting and monitoring the injection process parameters. The screw of the machine with a diameter of 30 mm rotates at a speed in the range of 10 to 380 rpm. The equipment of the machine for plastic injection moulding includes, among others, a plastic feeder and a crane with a multi ...
used
PONAR ŻYWIEC UT-025 H injection moulding machine built in Poland in 2005, is used in the process of processing thermoplastics by injection moulding. The characteristic feature of the machine is a two-plate hydraulic mould closing system with attached closing cylinders, working with a force of 25 tons. The machine’s screw with 22 mm in diameter rotates at a speed from 10 to 370 rpm and is driven directly by a hydraulic motor. The high-tech control system of the MITSUBISHI FX2N-48MT-ESS/UL allows for high automation of the injection process with setting and control of the injection parameters from the control panel located on the body of the machine. The injection moulding machine is offered with a wide range of equipment, including a plastic feeder and a MITSUBISHI E600 HMI panel. Total weight of the machine is 1470 kg. Characteristics of PONAR ŻYWIEC UT-025 H injection moulding ...
used
Zenner fan // 4.7 m³ / s // Power requirement 18 KW // EX certified //
used
No. 5153: 1 gebr. Tool Presetting Device Fabr. ZOLLER
used
capacity 90 degrees: round: 220 mm capacity 90 degrees: square: 210x210 mm capacity 90 degrees: flat: 230x185 mm : 150 mm : 150x150 mm : 150x210 mm : 90 mm : 90x90 mm : 90x100 mm dimensions of saw-band: 2450x27x0,9 mm cutting speed: 35/70 m/min work height max.: 915 mm : 265 mm total power requirement: 1,2 kW weight of the machine ca.: 240 kg dimensions of the machine ca.: 1550x870x1740 mm Zimmer Z241 / R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After cutting, the machine stops by a safety limit switch. The lowering is infinitely adjustable via a hydraulic system. Lifting the saw arm after cutting can be done in any position. The saw arm stops at the desired position. Standard features: - Hydraulic cylinder - emulsion pump - Eccentric tensioner - Underframe - saw blade - 400V plug 16A The data for this ad was created with ModulMWS - the software solution of LogoTec ...
used
Conveyor belt Stollen belt Conveyor belt Flat belt, mobile, mobile used Manufacturer: andre zalkin & co Type: ECT Conveying length: approx. 3000 mm Width: approx. 200 mm Funnel approx. 1100 x 1100 mm partly stainless steel Belt channel with Plexiglas cover mobile Foldable Drive with gear motor Total dimensions: approx. 4500 x 1200 x 1200 mm
new
capacity 90 degrees: round: 240 mm capacity 90 degrees: square: 240 x 240 mm capacity 90 degrees: flat: 165 x 210 mm : 195 mm : 185 x 185 mm : 130 x 190 mm capacity 60 degrees: round: 120 mm capacity 60 degrees: square: 85 x 85 mm capacity 60 degrees: flat: 85 x 120 mm Motor output: 1,2 kW : 170 mm : 145 x 145 mm : 60 x 195 mm cutting speed: 36 + 72 m/min dimensions of saw-band: 2725 x 27 x 0,9 mm : 315 mm work height max.: 900 mm Weight: 330 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Scrap shear dentition attachment for an excavator used MBI ZHEJIANG MANTOVANI MANTOVANIBENNE Type MS22-MC Year: 2020 suitable for multipunch MS22R Overall dimensions: 1100 x 1100 x 500 mm Changes and errors in the technical data, information and prices as well as prior sale reserved
used
Scrap shear dentition attachment for an excavator unused MBI ZHEJIANG MANTOVANI MANTOVANIBENNE Type MS15-MC Year: 2020 Overall dimensions: 1100 x 1000 x 500 mm Changes and errors in the technical data, information and prices as well as prior sale reserved
used
Tank scissor dentition, scrap scissor bit attachment for an excavator used MBI ZHEJIANG MANTOVANI MANTOVANIBENNE for MS22 Overall dimensions: 1400 x 1300 x 500 mm Changes and errors in the technical data, information and prices as well as prior sale reserved
used
Inlet opening: approx. 500 x 700 mm Rotor width: approx. 700 mm Rotor diameter: approx. 1000 mm Stator knives: 2 Rotor blades: 10 Drive: 110 kW
used
Inlet opening: approx. 1000 x 1700 mm Rotor width: approx. 700 mm Rotor diameter: approx. 1000 mm Stator knives: 2 Rotor blades: 10 Drive: 110 kW
used
Hydraulic swivel bending machine Year of construction 1978 Power 2.000mm x 2,5mm Engine 2,2KW Weight approx. 2,8to Technically good condition Condition according to photos. Machine ready for demonstration under power.
used
Used Zollern BHW straightening machine Straightening machine RM100 Jaw width 400mm Max clamping width (jaws on the outside) 820mm Hydraulic agregat Rexroth With drip tray for hydraulic agregat Bake with 3 sets Total dimensions only straightening machine 160cm Depth 60cm Height 90cm Total weight approx. 500kg Fully functional. Condition see pictures Viewing and pick-up possible Shipping Germany (without islands) 140,00 Euro net The goods can be viewed at the location 59379 Selm by appointment. Company Michael Bergau Tel. 0152/29500504 You will receive an invoice with VAT shown. Payment: Payment by bank transfer before delivery of the goods. Or cash payment on collection.
used
Universal length measuring device Carl Zeiss ULM600 used incl. accessories
used
Carl Zeiss WEMI x=150 mm / y=50 mm Accessories Lens 1.5x Lens 3.0x Lace Buck