z blade mixer used for sale

Nowicki Vakuum tumbler -Typ: MA-G-5400 -Kapazität: 5400 l -Max. Beladung: 2700 kg -Mit Kühlung -Antriebsleistung: 8,2 kW -Gewicht: 2900 kg -Abmessungen: 4150 x 1900 x 2350 mm -Stromversorgung: 3 x 400 V -Aus Edelstahl -Einsatz mit Band- oder mechanischer Beladung -Verfügbar: 2 Stück -Zustand: Gebraucht, sehr gut, generalüberholt, sofort einsatzbereit

Tumbler Lutetia -Type: 1 -Power: 4 kW -Capacity: 950 L -With documentation -Weight: 800 kg -Working capacity: approx. 400 kg -Power supply: 400V 50Hz 3Ph -Made of stainless steel -Drum diameter: 970 mm -Dimensions: 2180 x 1200 x 1820 mm -Condition: Used in very good condition, overhauled, ready to work

Equipped with: feed mixer RX 9.15 M – 12 m³, tyre size 445/65R22.5, year of construction 2012, CE marking, year of construction: 2012, tank capacity: approx. 15 m³, own weight: approx. 5,300 kg, gross permissible weight (GVW): approx. 10,800 kg, axle load: 12,000 kg, support load: 2,200 kg, PTO speed: 540 rpm, hydraulic pressure: 150 bar, single axle, hydraulic support leg, weighing device, hydraulic discharge conveyor front, serrated cutting blades on auger, front left discharge, Double vertical mixing augers, hydraulically operated unloading conveyor / cross discharge, electronic weighing installation (display available). Auction-ID: A1-40136-183

Overview This premix beverage mixer was manufactured in 1969 by Stork Jansen & Sutorius N.V. The machine is designed for the production of carbonated and non-carbonated soft drinks as well as carbonated water. It is configured as a multi-tank mixing and carbonation system including product tank, vacuum tank and saturator for consistent mixing and CO₂ dosing. The unit has been fully refurbished in 2020, is currently in operation, and available for inspection. Technical data Capacity: approx. 15,000 L/h Application: Beverage mixing (carbonated and non-carbonated soft drinks, carbonated water) Configuration: Multi-tank system (product tank, vacuum tank, saturator) Operating pressure: up to approx. 6 bar (typical 1.2 – 1.4 bar) CO₂ content: approx. 6.5 – 7 g/l Electrical: 380 V, 3-phase Drive power: approx. 5.5 – 7.5 kW Scope of Delivery  Premix beverage mixer | Stork J ...

Intensive batch mixer with a usable filling per batch of 750 l. / 1,200 kg (max.), emptying via central bottom flap (hydraulically operated), tools: pin whirler and wall-to-floor scraper. Agitator drive: 45.0 kW via toothed belt, drum drive: 11.0 kW via sprocket, hydraulic unit: 2.2 kW for lock actuation. All parts in contact with the product are made of stainless steel, only 2,417 operating hours.

Additional title: in various designs

Premix plant for the production of highly and low carbonated beverages. The technical process steps are: degassing of water, carbonation of water, dosing of fruit juice in a partial stream into the carbonated water. Mixing takes place in the mixing section to the equalising tank. The water used is sterile-filtered in the inlet via two particle filters., Additional title: Intermix system with carbonisation unit, Water output: 22575 l/h, Fruit juice output: 4907 l/h, Operation / Control: Control panel, manual, Material: Lacquered mild steel frame, stainless steel product contacts, Position: Free standing, Base construction: Open frame construction with spherical feet, Features: Deaeration tank, impregnation tank, equalisation tank, CO2 dosage control, internal piping, pumps and fittings, control cabinet 2 trap filters for fine filtration of water in the inlet

Spiral mixer BOKU, type: SK 240 A There are 2 engines and 12 tank cars available - Kettle suitable for a maximum of 240 kg of dough - back from the bakery - Machines were in use until recently Visits and test runs are possible by arrangement.

Seydelmann double shaft ribbon mixer, type: MR 600, machine number: 16 670-1, year of construction: 2016, dimensions inside: 1000 mm x 850 mm x 750 mm, total dimensions: 2100 mm x 1500 mm x 2000 mm. Including s/s platform, working height: 800 mm, total dimensions: 1500 mm x 900 mm x 1900 mm.

CFS double shaft vacuum paddle-mixer on s/s frame with weighing cells, type: UNIMIX I 2000, machine number: 5000067247 POS.714, year of construction: 2009, 400 V, 3 Ph, 50 Hz, 34.5 A, 18.5 kW, volume: 2000 liter, dimensions: 4200 mm x 1900 mm x 2650 mm. Missing switch cabinet.

Ploughshare mixer Manufacturer: Lödige Type FM 130 D Serial No. 3237 with stainless steel base parts in contact with the product made of stainless steel 1.4541 polished IQ/OQ from May 2008

It is a used Hobart planetary machine type A 200 on mobile stainless steel frame for sale. The machine is checked and runs smoothly. With 20 litre bowl, 4 x tools (1 x whisk, 1 x dough hook, 1 x kneading spiral, 1 x flat stirrer). The machine has a safety ring with automatic shut-off above the boiler. The planetary machine has three speeds. A video can be sent on request. Price: 1150,--€ excl. VAT ex stock Straubenhardt (Germany)

Horizontal Mixing Machine, Paddle Mixer AMM-150 NEW MACHINE Tank volume 150 litres, Machine made entirely of stainless steel, Forwards and backwards can be mixed T-shaped mixing arms Mixing shaft removable for easier cleaning Mixing tank tiltable Maintenance-free drive Rideable on 4 wheels el. Connection 400V