z blade mixer used for sale

Manufacturer: Venyeskob Bandpalettentrockner 5500/24, Type: Ven Dry Vertcal Bandpalettentrockner 5500/24/2-Zonen, Year: 2020, Control: Venyeskob, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 400-5500, Min.-max. workpiece height in mm: 110, Working widht max mm: 1300, Number of pallets: 24, Palettenausmass LxBxH mm: 6100 X 1500, Lichte weite Paletten: 200, Tragfähigkeit Palette kg: 250, Palettenausmass LxBxH mm: 6100 X 1500, Heizmedium Warwasser: yes, Year :2020

Manufacturer: Venyeskob, Type: Zentrierrollengang, Year: 1995, Total metres approx.: 5, Working widht mm: 1300, Total hight mm: ca 980, Working widht mm: 1300, Year :1995

Manufacturer: Venyeskob, Type: Zentrierrollgang, Year: 1995, Total metres approx.: 5, Working widht mm: ca 1300, Total hight mm: ca 980, Adjustable: yes, Schräggestellte Rollen: yes, Stop straightedge: yes, Working widht mm: ca 1300, Year :1995

Manufacturer: Ziwo, Type: CL 11.10, Year: 1996, Work piece width min-max mm: 0 - 300, Min.-max. workpiece length in mm: 200, Min.-max. workpiece height in mm: 5 - 150, Wight approx. kg: 210, FREE TEXT: Beschickung, Year :1996

Manufacturer: Wolf Zuluftanlage mit Wärmerückgewinnung, Year: 2014, Control: SeparaterSchaltschrank, Zuluftleistung m³/h: 25000, Heizmedium : Warmwasser, Temperatur vor-rücklauf: PWW 90-70, Jalousieklappen: yes, Stellmotore: yes, Taschenfilter Typ: EU 3, Umrichtergesteuert: yes, Pumps: yes, Einspeisung Wärmerückgewinnung: yes, Kann erfolgen über Produktionsmaschinen: yes, Year :2014

Manufacturer: Ligmatech, Type: Stapelmat ZHK 10, Year: 1990, Control: Ligmatech, Work piece width min-max mm: 140-800, Min.-max. workpiece length in mm: 160-1200, Min.-max. workpiece height in mm: 10-60, Year :1990

Manufacturer: Berkmann <CRLF>Zuluft und Abluft<CRLF>Spritzstand, Year: 2009, Control: yes, Heizmedium : Gas, Heat recovery: yes, Electronic control board: yes, Number of spray booths: 1, Number of evaporation booths: 1, Abluftventilator m³/h: 14000, Underfloor exhaustion: yes, Supply air system: yes, Dachausführung: yes, Zuluftgerät kW Leistung 1: 232, Exhaust air device: yes, Ex-installed lamps: yes, Heat recovery: yes, Rückwärmezahl %: 38, max. Wärmerückgewinnung kW: 77, Overall heating output: 160, Year :2009

Manufacturer: Vakuumsaugtisch zum schleifen<CRLF>Plattenmaterial, Year: ca2000, FREETEXT1: Tischlänge mm 1700, FREETEXT2: Tischbreite mm 400<CRLF>, FREETEXT3: Saugerreihen 1, FREETEXT4: Drehbar stern, FREETEXT5: Aushebung, FREETEXT6: Höhe verstellbar1030 mm, FREETEXT7: Busch Vakuumpumpe, Year :ca2000

MODUL ZFWZ 630 Gear hobbing machine Wheel diameter 630-710 mm Gear width 400 mm Module 1-10 Max. axial feeding travel 400 mm Max. tangential feeding travel (hob shift) 200 mm Max. helix angle 45 degrees Min. number of teeth hobbed 10 Min. number of teeth hobbed with indexing drive 5 Max. hob diameter 200 mm Max. hob length 250 mm Diameter of working table 580 mm Hole in working table 100-250 mm Depth of hole in working table 45-300 mm Distance center of hob to working table surface 175-575 mm Driving taper for hob arbor (step taper) 50 mm Hob speeds of universal hobbing head steeped 50-400 rpm Milling spindle speeds (infinitely variable) 40-400 rpm Power capacity 29 kW Machine dimensions 3380x2715x2250 mm Machine weight: 9200 kg

Manufacturer: Ziehtec, Type: Ziehklinge mitfahrend, Design left: oben und unten, Design right: oben und unten, Flat scraper: yes, Controllable: yes, Tracing by roller: yes, Pulling: ziehend und schiebend, Chain track/upper pressure: Anbaugerät, Run on the machine: IMA, Price per unit Euro: 2250,

DC motor Stromag 70 kW, gearbox 2 x 960 Nm, with Coperion ZSB 70 side feed. The worm shafts and the end head are missing. Therefore, sales as spare parts carriers.

Manufacturer: Zuckermann, Year: ca., Control: Hand, Moulding spindles: 3, Tool-fly circle: ca.150, Tools Spindle 1: yes, Spindel 2 Werkzeuge: yes, Spindel 3 Werkzeuge: yes, Moulding gauge operation: yes, Frässpindel U/min: 6000, Fräsbereich horizontal nach Schablone mm: yes, Kopierstift: yes, Spannbereich Werkstücke mm: 1600, Arbeitshöhe max mm: 120, Arbeitshöhe min mm: 10, Pneumatical pressure for keying: yes, Driven work piece conveyor: yes, Total power kW: ca.4, Vorschub Stufenlos: yes, die 4 Station ist als Schleifstation ausgerüstet, Year :ca.

x-travel: 7.000 mm y-travel: 2.000 mm z-travel: 1.250 mm Control: Heidenhain iTNC 530 Internal cooling system: 15 bar milling head: Automatisch 0,001 spindle turning speed range: 4.500 U/min spindle drive: 37 kW taper ISO: 50 tool change unit: 60 Chip coveyor: Inkl. rapid traverse: 20/10 m/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m -CTS 15 bars -Controlled milling head (pos. Accuracy 0,001) -60 tools -37 kw spindle motor -rapid 20/10 m min -4500 rpm -iso50 -Renishaw RPM60 -chip conveyor -extra milling head (spare) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Zucchelli Forni Modular 2C2T Modular oven Serial: 2020E0860 2020, Stainless, two deck modular oven, chamber size 800mm x 600mm x 160mm, with adjustable temp and time controls, stone based, electric, 11.3Kw, mounted on mobile rack storage, 3Ph

x-travel: 10000 mm y-travel: 1500 mm z-travel: 2700 mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 400 mm gear width: 275 mm gear width: 275 mm max. module: 6 weight of the machine ca.: 5,5 t shifting: 100 mm dist. cutter spindle - workpiece spindle: 40/265 mm hob turning speeds: 50-400 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Slot counter spigot outside inside

SC3503.11.001 BB3503.11.001 68-92 mm further data on request

Tool used 320x24x58, n 5600 - 2300 HW, BLAA further data on request

Key data: 13 KW, 17 kVA, 400 V

Net price (excluding VAT) = 1.950,- € Gross price (incl. VAT) = €2,320.50 - - - - - Lister generator set 17 kVA - - - - - Engine: - Lister (English manufacturer of industrial diesel engines) - 3 cylinders -Diesel -Air-cooled - 1500 rpm - - - - - Generator: - 17.2 kVA - 230 / 400 volts - 50 Hertz - - - - - Condition: -Used - A test run was done - The engine starts and runs well - The generator does not generate voltage - A used replacement generator can be purchased for an extra charge (see Fig. 5) - - - - - Scope of delivery: - Lister generator set 17 kVA - Consisting of motor and generator - Installed on a metal base frame - For an extra charge, a used 20 kVA generator can be purchased (see picture 5) - - - - - Transport: - Germany-wide transport is possible for an extra charge - To be able to quote an exact freight price, plea ...

Key data: 16 KW, 20 kVA, 400 V

Net price (excluding VAT) = 2.250,- € Gross price (incl. VAT) = €2,677.50 - - - - - Lister generator set 20 kVA - - - - - Engine: - Lister (English manufacturer of industrial diesel engines) - 3 cylinders -Diesel -Air-cooled - 1500 rpm - - - - - Generator: - 20 kVA - 230 / 400 volts - 50 Hertz - - - - - Condition: -Used - A test run was done - The engine starts and runs well - The generator does not generate voltage - A used replacement generator can be purchased for an extra charge (see Fig. 5) - - - - - Scope of delivery: - Lister generator set 20 kVA - Consisting of motor and generator - Installed on a metal base frame - For an extra charge, a used 20 kVA generator can be purchased (see picture 5) - - - - - Transport: - Germany-wide transport is possible for an extra charge - To be able to quote an exact freight price, please ...

Year of manufacture 2007 Banding device Computer control with digital display Mobile substructure Delivery date: immediately Price on request. We supply and install worldwide.

Ingredients Silo from Riehle 7 containers of 25 kg each. Hinged lid top and front with viewing window Stainless steel Dimensions: 1380 x 580 x 700 mm, WxDxH Used cleaned We have many great stainless steel appliances in stock for you!

Gear grinding machine ZSTZ 630C1 with change gears.

Zebra110pax4 label printer and pneumatic stamp. RA2315 Printer manufacturer: Zebra Printer type 110pax4 Control panel: LCD display with status display and buttons on printer, manual control panel on the side and control via PLC I/O Print type: Thermal transfer printing or direct thermal printing selectable Interfaces: Ethernet/control cable Print media: Standard media, tags and RFID media (reading and encoding of RFIF labels) Current label size: 90x36mm, applicator is designed for this size Label length min: 12.7mm Print media width: 16-114mm Ribbon width: 25.4-107mm Ribbon length max: 900m Roll size core diameter: 25.4mm Roll size maximum diameter: 101.6mm Resolution: 203 dots/inch (8 dots/mm) Dot size: 0.125mm x 0.125mm Print speed: 12 inches/second Base area: 700x700mm, with 100mm protruding control panel/compressed air maintenance unit Applicator height: 800mm lower edge Print speed: ...

Legi-Air 4040Z with Zebra110pax4 label printer and pneumatic stamp. RA1933 Printer manufacturer: Zebra Printer type 110pax4 Control panel: LCD display with status indicator and buttons Print type: thermal transfer printing or direct thermal printing selectable Interfaces: RS 232 Seriel, IEEE 1284 Print media: standard media, tags and RFID media (reading and coding of RFIF labels) label length min: 12,7mm width print media: 16-114mm ribbon width: 25,4-107mm Ribbon length max: 900m Roll size diameter core: 25,4mm Roll size maximum diameter: 101.6mm Resolution: 203 dots/inch (8 dots/mm) dot size 0,125mm x 0,125mm Print speed: 12 inch/second Features: Breite Druckmedium: 16-114mm Breite Farbband: 25,4-107mm Maximale Länge Farbband: 900m Punktgröße: 0,125mm 0,125mm Druckgeschwindigkeit: 12 \/s, 304,8 mm/s Druckertyp: 110Pax4 Druckmedien: Standart, Anhänger und RFID-Etiketten

VA outdoor silo Zeppelin-Reimelt last content Sugar Ø 4,000 mm Content approx. 175 cbm Discharge: vibrating floor, lock, etc. Jet filter on top Bulk density 1.1 t/m³ Ladder, entrance door, full detector, silo entrance see pictures Price on request or Send asking price Phone +49 (0)172 8345457

for overhauling all types of shoes, tools incl.

sanding belt measurements: 150x2000 mm : 1400/2800 U/min band speed: 16,5/33 m/s total power requirement: 2,6/3,37 kW weight: 190 kg Standard features: - vibration-free running smoothness - Working height adjustable - S1 motors with 100% duty cycle - Surface and contact grinding is possible - Removable protective cover for surface grinding - Connecting piece for double suction - Built to CE standard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sanding belt measurements: 150x2000 mm : 1400/2800 U/min band speed: 16,5 / 33 m/s total power requirement: 3,4/4,5 kW weight: 190 kg Maximum grinding of pipes is possible: at 90 degrees max. 150 mm Ø at 60 degrees max. 127 mm Ø at 45 degrees max. 100 mm Ø at 30 degrees max. 70 mm Ø The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cooling aggregat ZCH -3 - NEW External dimensions: L 1300 x W 750 x H 1250 mm Weight: 190 kg Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała Identyfikator VAT: PL547-17-47-669 tel. 0048/33 812 58 60 Faksu. 0048/33 812 58 36

Letterpress numerators, all 9 pieces in working condition: 8 reverse; 1 forward Can ship worldwide.

Offer 24591 Specifications: - Max. pressing force 25 t - Max. ram stroke 500 mm - Lifting speed 0 - 40 mm/s - Return 0 - 200 m/min - Installation height 800 mm - Projection to the middle of the ram 360 mm - Pusher clamping surface 440 x 360 mm - Plunger clamping pin 40 mm - Table size 630 x 500 mm - Table height above floor 710 mm - Thermoforming force 10 t - Largest deep-drawing depth 160 mm - Drive 400 V / 4 kW - Space requirement approx. W 800 x H 2720 x D 1150 mm - Weight approx. 2500 kg

Zayer 30KCU/AR 2003

Key data: 700 mm, 250 mm, 350 mm

Universal Milling Machine ERNAULT SOMUA HES ZHV1 Travel X : 700 mm Travel Y : 250 mm Travel Z : 350 mm Rotation : from 40 to 2000 RPM Table size : Length 1200 mm x Width 300 mm Vertical/horizontal universal swivel head Scale 3 axes EAE Rapid 3 axes Voltage380 V Width: 2000 mm Depth: 1800 mm Total height in height: 1600 mm Weight: approx 1,5 T

For Sale: Complete Drum System for Zinc Electroplating Year of Manufacture: 2000 This complete setup includes all essential components for efficient operation: - Drum Line with 5 TW - Centrifuge with TULZ from WMV - ROSS Cooling System - Drum Dryer Find more here - / Contact us at -

Inv. Num. : 8372 Type: ZLSM-4x1.20-3x1.20-0 Producer: Mühlböck Generated: Parameters: Depth: 5400 mm Height: 4200 mm Length: 6520 mm Capacity: 12 x 8 63 m3 (103 68 m3) Load: 100 kg per 1m2 Number of fans: 4 pieces

Usable work area with cutting head: 1000 x 1200 mm Usable work area with milling head: 950 x 1150 mm Cutting/milling speed: 10 mm/sec - 500 mm/sec Acceleration: up to 5 m/sec2 Mechanical/addressable resolution: 0.01 mm Static repeatability: 0.02 mm Software data format: ASCII/HPGL RS-232 interface or RS-232/USB converter Plotter input buffer: 16 kilobytes Power requirements: 230 volts +-10% / 50-60 Hz / 450 VA Software: CoCut trial version can be downloaded for free. Converter is missing to be able to mill.

set of machines to manually produce hard covers etc. set consists of: - Record 54 - gluer, warm and cold glue, working width 54 cm - Rimbo 110 - double turning in station, working width 110 cm - Ottima 74 - nip roller press, working width 74 cm - Schmedt Prädeck - board positioning table, 60x40cm (extension possible)

Compressor, compressor two-stage type S6H-20.2Y, displacement 73 m3/h For blast freezers or deep freezes. Needed two pcs., checked in stock.

Die-sinking EDM BF 1200 ZENIT+ :::TECHNICAL SPECIFICATIONS::: X-axis travel: 1200mm Y-axis travel: 600mm Z-axis travel: 500mm Max piece weight: 250Kg C-axis: yes Number of electrodes: 6 Bowl dimensions: 1880 x 1073 x 565mm :::D DIMENSIONS AND WEIGHT::: Length: 2850mm Width: 2800mm Height: 2730mm Weight: 5500Kg

Manufacturer: PFM Type: Zenith Inox Year: 2002 Capacity: ~50 pcs/min Electrical power: 4.5 kW Weight: 680 kg Optional: Piston filler with heated tank for processed cheese Condition: good, fully functional

Key data: 6000 mm, 2000 mm, 3000 mm

Machine Type: CNC Travelling Column Milling Machine Make ZAYER Type KCU6000 Year of construction 1992 Control type Heidenhain TNC 415 X-way (mm) 6,000 Y-off (mm) 2,000 Z-off (mm) 3,000 Speeds from (rpm) 20 - 1,800 Tool holder BT50 Feed longitudinal (mm/rev) 5 - 5000 mm/min Feed Transverse (mm/U) 5- 5000 mm/min. Vertical feed rate (mm/rev) 5- 5000 mm/min. Rapid traverse 10,000 mm/min. Total power(KW) 34 Length (mm) 11,000 Width (mm) 2,500 Height (mm) 7,000 Weight 31.000 kg Information 'Juaristi MG6' rotary table: 1500 x 1200 mm With coolant pump Cooling system: 2.5 bar Tool cooling: 15 bar

Intermittent Carton Packaging Machine ZHJ-150 Exhibition Machine/ Exhibition Machine Multifunctional Cartoning Machine ZHJ-150 ZHJ-150 automatic cartoning machine is suitable for packaging aluminum PVC blisters, round bottles and special bottles, Shaped bottles and similar products. Package inserts can be folded automatically, cartons can be erected, products can be fed and the cartons can be resealed (offset plug-in closure). Embossing can be made on the cartons. This machine has PLC control, with each station monitored by photoelectric sensors. If there is a problem detected during operation, the machine will automatically stop and display the fault. This machine can run as a single machine and can also be connected to a blister packaging machine and other pre-machines. The machine can be viewed at any time in 73084 Salach/Germany and tried out with your products. Dependin ...

Producent INTOS Zebrak Tjechië Type FNGJ 20 Chalkboard afmeting breedte x lengte 400 x 256 mm Longitudinal Plaatsing X=as 450 mm Dwarsverplaatsing Y=as 300 mm Verticaleverplaatsing Z=as 350 mm Spindle opname SK 40 DIN 2080 Spindle toerental 50 -2500 rpm. Aantal toerentallen 18 Sheet voeding X-Y as 8-400 mm/min. Sheet voeding Z as 4-200 mm/min. Rapid traverse X-Y as 2400 mm/min. Rapid traverse Z as 1200 mm/min. Electrified capacity 2.2 kW Afmetingen L x W x H 1735 x 1475 x 1660 mm Weight 1660 kg Standaard toebehoren Koelmiddel inrichting Heidenhain uitlezing met taster

Double Column - Hydraulic Press RASTER ZEULENRODA (WALTER) Type WUP S 60Masch. No. 136 / 7 (156-165) Year of manufacture 1999Basic machine from 1987, in 1999 Overhauled with new controlPressure capacity 60 ton. Stand width 1090 mmStand passage laterally 265 mm (one-sided) Plunger area 650 x 300 mmAdditional plate on ram 990 x 550 x 60 mmTable area 990 x 550 mmPlunger stroke max. 320 mmInstallation height 330 or 390 mmTable height above floor 980 mmHydraulics Operating pressure 320 barRapid traverse downward 75

Vibratory Spiral Conveyor / Sorting Device / Spiral Conveyor / Vibratory Conveyor WEBERVibratory Bowl, Sorting Device / Screw Feeder with Vibratory Conveyor for Screwdriving TechnologyFeeding System, Feeding DeviceType: ZEM 360Masch.- No.: 1113557 Year of Construction: 2004Pot Diameter Top: 360 mmPot Diameter Bottom: 250 mmPot Inner Height: approx. 110 mmSorting Lane Width: approx. 20 mmFilling Weight: approx. 12 kgFilling Quantity: approx. 3 LitresControl Voltage: 24 Volts DC (external power supply is required)Mains connection: 230 Volts, 50 Hz. Operating pressure: 6 bar control unit

Sanding range: 2000x900mm, transverse movement: 875mm, longitudinal movement: 2450mm, distance table to spindle center: 845mm, magnetic clamping plate dimensions: 2000x800mm, max. table load: 2.3t, feed rate longitudinal axis: 1000-30. 000mm/min, feed transverse axis: 0,01-2000mm/min, feed vertical axis: 0,001-1500mm/min, grinding wheel dimensions: 500x100x203,2mm, power grinding spindle motor: 22kW, length: 6800mm, width: 3450mm, weight: 13t. On-site inspection is possible.

A Zinser plasma torch cutting system is available. Table dimensions X/Y: 2000mm/6000mm, plasma attachment: Hypertherm HPR260, extraction system: Donaldson, draw channel length: 10m. Including various spare parts for the burner head. The automatic gas console is defective. Documentation available. On-site inspection is possible.

An eroding island consisting of two die-sinking EDM machines and an automation system is available. 1) Zimmer & Kreim ZK Genius 700, year of manufacture: 2015, travel X/Y/Z: 400mm/350mm/350mm, table dimensions X/Y: 575mm/500mm, max. workpiece weight: 700kg, generator output: 96A, path eroding: CIMCO, operating hours: 22056h. 2) Zimmer & Kreim ZK Genius 700, year of manufacture: 2019, travel X/Y/Z: 400mm/350mm/350mm, table dimensions X/Y: 575mm/500mm, max. workpiece weight: 700kg, generator power: 96A, path eroding: CIMCO, operating hours: 8255h. 3) Automation Zimmer & Kreim Chameleon Quad, year of construction: 2015, electrode positions: 176, pallet positions with loading drawer: 9, double rotary gripper for Erowa ITS and single gripper for UPC pallets. Overall system dimensions X/Y: approx. 3000mm/6200mm. Including a Kraft & Bauer fire extinguishing system with suction device. Documenta ...