z blade mixer used for sale

From an operational resolution: Zagro UVB Z 500 S YEAR OF MANUFACTURE unknown 380 VOlt Emergency stop Saw rollers Ø 500 mm Cutting length 700 mm Cutting width 450 mm Cutting heights 530 / 650 mm Saw blade lengths 3720 / 3920 / 4120 mm Table size 1000 x 800 mm AC 230 V / 16 A Width 1000 mm Total height 1800 mm Total weight 180 kg ----Engine cover is missing--see photo---

Position switch, drive for rotary axis actuation, electrical head with rotary axis -Type: ZC2-JE65 Quantity: 15 available Price: per piece -Weight: 0.2 kg

Position switch, drive for rotary axis actuation, electrical head with rotary axis -Type: ZC2-JE61 Quantity: 5 available Price: per piece -Weight: 0.3 kg

Ball valve internal thread -Internal thread: 2 -Full: Pass, full ball -Quantity: 5 available -Price: per piece -Weight: 3 kg/piece

capacity 90 degrees: round: 240 mm capacity 90 degrees: square: 240 mm : 165 x 310 mm saw band length: 2.725 x 27 x 0,9 mm mm table height: 940 mm band speed: 35 / 70 m/min total power requirement: 1,1 kW weight of the machine ca.: 0,4 t The Z252/DG has the following equipment: - Hydraulic semi-automatic, - Double miter 60° left/45° right - emulsion pump, - base, - saw blade, - 400V plug -16A- The machine is delivered fully assembled and ready for immediate use. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gearwheel Shaping machine WMW Modul ZSTTK 1250x24

Tenon milling machine / tenon cutting and slitting machine Manufacturer: Kölle Model: Z40 Year of construction: 1992 1 x Sawing 1 x Milling

Ball valve internal thread -Internal thread: 2 -Full: Pass, full ball -Quantity: 10 available -Price: per piece -Weight: 0.2 kg/piece

Nominal pressing force... 160t Table dimensions ... 1000 x 740mm Max. ram stroke... 25-160mm Plunger Dimensions ... 710 x 425mm Plunger adjustment ... 100mm Installation height ... 455mm Main engine power ... 11kW L x W x H ... 1380 x 1950 x 3350mm Machine weight ... 12180kg The machine is in good condition, possible to test under electricity.

Limit switches, push buttons, safety switches, position switches -Type: ZR332-11y-1338 -Price: per piece -Quantity: 4x Available -Weight: 0.5 kg

I sell the double knife veneer shears Josting ZFS 2800, built in 1997. Cutting length 2810mm. Cutting height 80mm. Cutting width 20-470mm. Very good condition. Available soon.

Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve -Solenoid valve -Connection: 3/8 inch -Air: 9 bar -Water: 9 bar Price: per piece Quantity: 15 available -Weight: 1 kg

Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve -Solenoid valve -Connection: 3/8 inch -Air: 9 bar -Water: 9 bar -Price: per piece -Quantity: 13x Available -Weight: 1 kg

Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve -Solenoid valve -Connection: 1/2 inch -Pilot: 3.9-10 bar -Pmed: 16 bar -Quantity: 1 available Price: per piece -Weight: 1 kg

LISTING ID: 22741 BRAND: MASSON MODEL: ZFW (MM) 12000 C RATIO: 1:2,747 POWER: 1369 kW (1835 bhp) 1800 rpm WEIGHT: 2530 DIMENSIONS: 110 x 148 x 143 (h)(cm) HS CODE: 84836080

Aluminium Z conveyor belt incl. mobile substructure Horizontal range 800mm (customizable) Rising range 2,000mm (customizable) 2. Horizontal range 800mm (customizable) Angle in the bend variable, infinitely adjustable Feed height: horizontal (individual) Discharge height individually adjustable Conveyor belt width 600mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt incl. cleats and corrugated edge Drive: Motor 0.55KW ( customizable ), speed approx. 0.3m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Scalloped edge: 50x25mm T-50 Cleat - 400mm pitch 2-layer particularly transversely stable The delivery time of an individual system is currently approx. 3-4 weeks, depending on the production effort. Our core competence lies  ...

Slotted disks, window milling tools, indexable inserts, window construction tools -Slit disk milling tool for: wooden windows -ZUANI LOGIFIX -Socket: Ø 50 mm -Weight: 6.8 kg

Aluminium Z-conveyor belt incl. substructure Horizontal range 1,200mm (customizable) Rising range 3,000mm (customizable) 2nd horizontal range: 1,200mm (customizable) Angle in the bend 45 degrees each Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable (can be moved) Conveyor belt width 700mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt incl. cleats and corrugated edge Drive: Motor 1.1KW (adjustable), speed approx. 0.3m-0.5m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Scalloped edge: 80x50mm T-65Studs - 150mm 2-layer particularly transversely stable We always have various systems of this type in stock. The delivery time of an individual system is currently ap ...

Slotted disks, window milling tools, indexable inserts, window construction tools -Slit discs, milling tool for: wooden windows -ZUANI Super Compact Fix -left tool -Socket: Ø 50 mm -Weight: 14 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 20/40 rpm -Power: 0.15/0.28 kW -Construction: B3 -Diameter shaft: 32 mm -Protection class: IP 54 -Dimensions: 520/210/H240 mm -Weight: 27 kg

Dosing pump, 2-component dosing pump -for dosing liquid media -2x dosing capacity 0-300 l/h -Pressure: 3 bar -Drive: 0.37 kW/57 rpm -Quantity: 1 piece available -Dimensions: 830/400/H340 mm -Weight: 125 kg

Cutting diameter 220 mm Saw blade length: 2450 x 27 x 0.9 mm Colour: grey Total power requirement: 1.2 kW Saw band width: 0.9 mm Cutting speed: 35 + 70 m/min Cutting range at 90 degrees: around 220 mm Cutting range at 90 degrees: square 220 mm Cutting area at 90 degrees: flat 230 x 185 mm Cutting range at 60 degrees: square 90 x 90 mm Cutting range at 45 degrees: around 150 mm Cutting area at 45 degrees: square 150 x 210 mm Machine No. 4777230

The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Zangheri & Boschetti B23 K dowel drill with swivel head Masch. Ref. K 74590 21 spindles Weight 506 kg The machine is in good condition, ready for operation. Subject to changes, errors and prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12

Year of manufacture: 2024, Connector size: 4 Cardan, Technical condition: very good, Visual appearance: very good, Price: On request, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just like to discuss what would be useful in your situation? , Dont keep worrying about it, just give us a call., We are available Monday through Friday between 7:00 a.m. and 6:00 p.m. Call, text, or email us, whichever you prefer., , Want to visit us? Yes, please!, , Our doors are open Monday through Friday from 7:00 a.m. to 4:00 p.m. On Saturdays, you are welcome by appointment.

Millipore Milli-Q CLX 7040 (LC) Water Purification System ZAFS51040 Catalog Number: ZAFS51040 Provides up to 800 L/day of clinical laboratory reagent water. Dispensing Flow 15 MΩ-cm, at 25 °C H × L system × depth: 125.5 cm (48.8 inches) × 54.3 cm (21.4 inches) × 79.7 cm (31.4 inches) Tank volume: 90 L, integrated Total Oxidizable Carbon Residue (TOC):

Carcass clamp Grass ZMG-P Year of manufacture 2005 Weight 24 kg The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12

Brand Armatec Bystronic Type ZLD 250 Category Rigid Ventouse Piston Serial Number 203019/1-2 Construction year 2003 Weight 50kg Assets 250kg Air pressure 6 bars

Electric motor for sale. Characteristics: - ▲380V / Y 560V (50Hz) 1465 1/min: 15kW - ▲400V/Y 690V (50Hz) 1470 1/min: 15kW - ▲475V (50Hz) 1470 1/min: 15kW - ▲440V (60Hz) 1465 1/min: 17kW - ▲450V (60Hz) 1470 1/min: 17kW

Acuum coating system ZZS 800 PVD Vacuum Coating Line Complete system incl. high-voltage source and 14KW chiller. Electron beam evaporation system with 2 E-guns 3 stages vacuum: rotary vane, roots, and diffusion vacuum pump With this system, metal oxide layers were applied to glass substrates. ZZS 800 PVD Coating System Manufacturer: XDNG Year:2010 Designation: ZZS 800 Machine number: 2010-426 Dome-based PVD coating system PVD High Vacuum Coating System with 2 Electron Beam Evaporators for thermal evaporation processes. Fully functional ! With this system, optical interference filters were produced on glass substrates as multilayer systems with defined controlled UV-vis and IR transmission. Three Stages Vacuum Pump System Stage 1 Rotary Vane Vacuum Pump Stage 2 Roots pump and Stage 3 Diffusion pump for high vacuum. Vacuum Chamber Size D=800mm H=900mm The facil ...

Inv. Num. : 7723 Type: ZRM9 Producer: Ernst Grob Generated: Parameters: The machine is used to produce involute grooves by extrusion. Accessories: Several grave goods Universal Gear wheels

Technical Specifications & Performance Data The Used Zambelli Pump 50 liters per hour is a compact, gentle-transfer solution designed for wineries and beverage production environments where product integrity and sanitation are paramount. This second hand unit leverages a rubber impeller to move delicate fluids with minimal shear, making it suitable for wine decanting and transfer of de-stemmed product (must), as well as other low- to medium-viscosity beverages. Manufacturer: Zambelli Machine type: Rubber impeller transfer pump Nominal capacity: approx. 50 liters per hour (process-dependent) Construction: Bronze pump body for food-contact applications Flow direction: Reversible flow for flexible process routing Connections: Garolla hose connectors for rapid hook-up and changeover Application focus: Wine decanting, transfer of de-stemmed grapes/must, and general beverage transfers Integrat ...

rand Zwick/Roell Type Material testing machine Chassis number FS3396 Length mm 1200 Width mm 700 Height mm: 2000 Transport dimensions L x W x H 2.5 x 1.2 x 2.0 Control type Manually operated Documentation No Instructions No Electrical diagram No Photos/film available: To follow

Key data: 120 l/min, 12 W, 7

Text

Key data: 400 l/min, 6

Central plant with 2 pieces of automatic centrifuges, operation until February 2019 with oil. The Cleaning system for oil incl. tank 20 m3, is equipped with two automatic centrifuges of 150 m3 each. 200 liters/min. The total capacity of the plant is 300 to 400 liters per minute. Oil or emulsion, with emulsion more than 400 liters possible. Two centrifuges T42 , Clean tank 20 m3 oil (divided into two separate tanks with overflow) incl. pump for Supply of production with pure oil. In addition, the system has a lot of accessories: all spare parts + an old one centrifuge from 1987 as spare parts dispenser, a lifting tipping device for the Sludge emptying of the 200 kg buckets. The sludge ejection runs with this centrifuge automatically into the bucket under the centrifuge. The scope of delivery also includes a additional electrical cabinet for a second system with the sam ...