z blade mixer used for sale

Working width: 820 mm rotor flight circle: Ø 720 mm drive: 90 kW cutting system: 8 cutting blades equipment: mechanical adjustment of the cutting gap Machine weight: 3500 kg

Type: ZSA 1500 Working width: 1500 mm Flight circle metering drum: Ø 1600 mm Motor power: 18,5 kW Length metering device: 7800 mm Width metering device: 1600 mm Volume metering device: approx. 25 m ³

Infeed width: 720 mm infeed height: 330 mm rotor flight circle: 1000 mm number of cutting knives: 2 piece number of counter knives: 1 piece infeed: 2 x 3 rolls motor power: 110 kW screen perforation: Ø 30 mm machine weight: ca 7,800 kg

Inlet cross section: 2500 x 1900 mm drive: 2 x 110 kW rotor flight circle: Ø 745 mm rotor speed: approx. 93 RPM rotor design: 185 PCs. cutting plates 50 x 50 x 25 mm screen perforation: Ø 70 mm counter knives: with cutting gap adjustment machine weight: approx. 29,000 kg

Working width: 2000 mm rotor flight circle: Ø 1000 mm drive: up to 315 kW cutting system: 40 piece cutting bars facilities: counter knife traverse pivoting hydraulically Right-left operation Hydraulic hood opening Screen: hydraulically extendible

Screw caper heads d 28 aluminium from SIMONAZZI filler

used mobile scrap shear, so called container shear 400 t shear force refurbished John-Deere diesel drive, 84 kW YOC 2009 only 700 operation hours spare part supply and service offered for all CNS400K details see abc.containershear

Full automatic video inspection and packaging system for plastic caps. Different sizes. Include elevators, hopper ZALKIN, two camera video inspection COGNEX, packaging system.

Qty. 1 Second-hand continuous copper rod casting line Mfc.: Zamet-Budova Mascin, Hydromar, Kobold, Lechler, Lenze, Bauer, SEW-Eurodrive Built: 2012 Type: Continuous horizontal casting process Rod dia.: 20 – 80 mm Rod length: 2.0 – 4.0 m Capacity: The line consist of: Induction holding furnace Crystallizer with radiator - 2 pcs. single-cast dia. 51 – 120 mm & twin casting 20-50 mm Secondary cooling Stretch device Saw blade assembly Run-out table Reception basket Pump station with tanks and heat exchangers and cooling towers for three circuits: 1. cooling of the furnace generator 2. cooling of the furnace inductor 3. cooling of the mold Hydraulic pumping station Mfc.: REXTON – BOSCH Line parameter control panel Cases with electronic control system of the line-2 pcs. Station of preparation, drying, pressing the graphite sleeve of the crystallizer. C ...

Universal milling machine with automatic movement ram. Table: 1700x700. Longitudinal travel: 1320mm. Cross travel: 1016mm. Vertical travel: 560mm. ISO50. 18 speeds (28-1800rpm) 18,75 Hp. Weight: 6200Kg.

FRICTION WASHING MASHINE Electric power 7,5 kW In good condition

; very good condition, ready for operation

Copy: 2400mm wide -burning table: 3000mm x 3000mm The system is under power; ready to use immediately

Roles of the guide way must be replaced under current; ready for immediate use

1 of used film-only shrink wrapper, make ZVT (KHS), type SP030V, new 2000. Operating side: left. Capacity 30 cycles/minute nominal, 35 cpm in overspeed. Siemens S7 PLC. Indramat EcoDrive servo's. Used for PET bottles in clear and print-registered shrink-wrap film as: 500 ml, D 63.5 x H 230 mm, 3x2=6, dual-lane, 1.000 ml, D 80 x H 281 mm, 3x2=6, dual-lane, and 1.500 ml, D 89 x H 332 mm, 3x2=6, dual-lane. Future option (no parts supplied) was 2.000 ml, D 100 x H 349 mm, 3x2=6 and 2x2=4, dual-lane.

Eccentric C stand press, little used C frame - eccentric press, used Type: PED 63.3 S4 manufacturer: WMW Year of construction: 1994 Pressing power / rated pressure: 63 t Sheet thickness / material thickn. 3.2 mm Table size / surface of bed: 800 x 580 mm Hole in the table / hole in table: 300 mm diameter. Stroke / stroke of slide: 8... 120 mm Number / number of strokes: 56 / 90 / min Tappet adjustment / adjustment of slide: 70 mm The maximum distance between Table and plunger / max distance between table and slide: 560 m Projection / Cap: mm Power of main motor / power of main motor: 6 kW Weight / weight: 5.5 t

Surgical image intensifier (C - arm) Ziehm Exposcop 8000 with dual monitor. Digital multiple image memory, Sony video printer in good condition

Hardening furnace ZWUT PSK-1 built by ZWUT. It is intended for various types of laboratory and industrial work. Technical data : - power consumed at T = 1350 degrees C: 4,10 kW - installed power: 5.5 kW - power supply voltage: 220 V, 50 Hz - secondary voltage of the autotransformer: 7-41, 1-3-58, 9-5-84, 4 - number of phases: 1 - nominal temperature: 1350 degrees Celsius - temperature control accuracy: 1.5 (or 0.2 + /%, when working with a feedback attachment) - type and number of silites: 8/150/150/10 mm / pcs - warm-up time to T: about 3.5 hours - usable dimensions of the heating chamber (height x width x length): 150 x 150 x 280 mm - furnace weight: 138 kG - weight of the cabinet: 81 kG

Zinser LK 110 Photo-optical cutting and plasma cutting system. The system has been upgraded from a control point of view. Cutting is possible via Photokop as well as via Cad / Cam Sytem possible. Optionally, autogen or plasma can be cut. Plasma source : Kjellberg PAS 45 W (cut up to 45mm) suction cutting table: 1.5 x 3m (new) including control PC with Cad/cam system Complete machine bridge available as spare part dispenser. Under electricity to visit .; ready for immediate use

Expansion tanks Zilmet. 500 litres

Abegg to fan and the fan with fans Ziehl. noch nie benutzt NEW

Frequency-controlled heating laboratory press with force measuring device -Pressure 20 KN / 2 tons -Pressing area 220 220 mm -Maximum pressing force at 220 220 mm: 41 N / cm² -Hot press with moveable lower pressing plate, electric drive with gear reduction, force measurement is carried out by means of strain gauge sensor -Heat output approx. 1 KW -Plate temperature 120 ° C -Dwell time / duration of laminating: 1-10 s -Pneumatic connection 6bar required -Power supply 400 V, 16 A -Sliding table with integrated positioning pins, lower pressing plate, pneumatic drive -Pressing panels with switchable integrated vacuum channel -Electrical control system integrated with PLC control display in the front panel of the machine -Side channel pump to generate the vacuum

Slow runner with sliding floor 800 mm rotor width 11 kw motor

1 ZELTEX laboratory high temperature dyeing machine type Colorstar CS1-F/2L, SEDO PC1000 dye cycle controller, for 6 inch bobbins

ZIEGLER C41-20A - air forging hammer Hammer weight: 20 kg Strokes: 270/min Lifting height: 200 mm Projection: 180 mm Cylinder diameter: 115 mm Hammermasse: 90 x 50 mm Engine power: 2,2 kW Voltage: 400 V Dimensions WxHxD: 460 x 1110 x 820 mm Weight: 380 kg Equipment: Hand - and foot operation, integrated Ambos Base optional

Product number: 1087 Type: Putweger Serial number: 3342-7 Year of construction: 2013, NEW in the crate Max weight: 1000 kg Dimensions scale: 1500 x 1200 mm Dimensions frame: 1520 x 1720 x 300 mm Indicator: Systec IT1000 Power: 240V, 50Hz, 0.5kW Scale can be tilted for cleaning Including frame for into floor 8 pcs. in stock

incl. 1 feeding and 1 laxative tape (stud tape) Used – good condition – functional – without CE declaration for the packaging of granular, bulk or powdered filling material Packaging processes are electronically controlled via PLC Machine frame made of aluminium, legs made of stainless steel Packaging material: Hot or cold weldable material – polypropylene, finely perforated material, variously lamination material depending on the packaging material and filling material length, the production speed can reach a maximum of 50 cycles/min. at a maximum film speed of 12 m/min. Maximum dimensions of the filling material : Min. Max. Filling material length 100 400 Filling material width 10 230 Packaging volume in liters 4 Foil roll circumference 500 Film roll diameter 350 specifications: Weight: 450 kg Power consu ...

Hersteller:Zoller Typ: Venturion 800 Baujahr : 1995 zum Einstellen und Messen von Bohr- und Ausdrehwerkzeugen, Fraesern und Drehwerkzeugen mit digitaler Anzeige; einsatzbereit

The ZAKMET FIRECUT CNC 1325 13000 X 2500 gas plasma cutter was produced in 2011. The machine is equipped with Hypertherm EDGE'Pro digital control. The burner's working area is 13,000 mm long and 2,500 mm wide. The running elements of the cutter are lubricated with the Memolub 3.0 central lubrication system. Technical data of the plasma burner: - machine working area (L x W x H): 13,000 x 2,500 mm (additionally 700 mm) x 200 mm - maximum table load: 15 kN / m2 - machine supply voltage: 3x400V AC 50 Hz - central lubrication: Memolub 3.0 - minimum temperature of the working environment: +5 degrees C - maximum temperature of the working environment: +60 degrees C - machine dimensions (L x W x H): 14500 x 5500 x 2000 mm Plasma cutter equipment: - CNC control: Hypertherm EdgePro - ventilated section table: 1550 x 2600 mm - 9 segments - gas burner: type MS 3452 \ 250-PM (x2) - ...

Two-coordinate measuring instruments ZKM Applications: External measurements - Internal measurements - Bore distance measurements with double image eyepiece Shape tests with reable inserts Angle measurements with angle measurement slot and optical rotary table (2") Male thread measurements Equipment: Spitzenbock - Angle measuring device to the tip trestle (5") - adjustable V-bearing opt.-mechanical probe (measuring lever attachment) - adjustable plant table - incident light illumination Projection device - Rotary table with partial circle Increased optical touch accuracy through the use of inteference lines ZKM 01-150 Measuring range x - 150 mm Measuring range y - 100 mm Scale value 0.1 mm ZKM 01-250 Measuring range x - 250 mm Measuring range y - 100 mm Scale value 0.1 mm possible versions:  ...

8 closing heads work direction: right to left

Two-coordinate measuring instruments ZKM Applications: External measurements - Internal measurements - Bore distance measurements with double image eyepiece Shape tests with reable inserts Angle measurements with angle measurement slot and optical rotary table (2") Male thread measurements Equipment: Spitzenbock - Angle measuring device to the tip trestle (5") - adjustable V-bearing opt.-mechanical probe (measuring lever attachment) - adjustable plant table - incident light illumination Projection device - Rotary table with partial circle Increased optical touch accuracy through the use of inteference lines ZKM 01-150 Measuring range x - 150 mm Measuring range y - 100 mm Scale value 0.1 mm ZKM 01-250 Measuring range x - 250 mm Measuring range y - 100 mm Scale value 0.1 mm possible versions:  ...

Carbon black weighing scale 400l Description attached!

Grinding diameter: 0 mm Grinding length: 0 mm Workpiece weight: 0 kg CNC Brand: 0 CNC Model: 0 Technical data Centre height: 100 mm Distance between centres: 400 mm Max. Longitudinal travel: 320 mm Grinding wheel: Grinding weehl left side: Diameter: 400 mm Width: 25 mm Bore: 127 mm Max. grinding diameter: 198 mm Workpiece weight on centres max.: 60 kg Grinding wheel speeds: number (steps): 3 Peripheral speed: 32 m/s Work piece spindle head: Spindle taper:: 4 MT Taper in tailstock:: 3 MT Voltage 50 Hz 3x: 400 Volt External Grinding wheel motor: 3 kW Machine´s weight about: 1500 kg Various accessories: Internal grinding attachment swivellable: Spindle speeds: 22000 rpm Swivellable redressing device Rayon redressing device Sparking-out attachment Set of collets

Double crankshaft mechanical press RAVNE DE 315 2 crankshaft, closed type, simple action press DE 315 Manufactured by Zelezarna Ravne, Yugoslavia Press is in excellent working condition, has moving table and hydro cushion YOM 1990 Description Capacity 315 tons Slider stroke 400mm Number of strokes per minute 18 Table dimensions 2500 x 1400 mm Slider dimensions 2500 x 1400 mm Distance adjustment between table and slider 250mm Distance between table and slider in its lower and upper adjustment position 700mm Force of hydro cushion 8 tons Stroke of hydro cushion 155 mm Weight 75 tons

6-Achsenmessgelenkarmsystem Manufacturer: Zett-mess Type of machine: AMPG - 36 p Year of construction: 2003 2 same facilities are available. The price is for a plant. All information without guarantee

Turning diameter: 6400 mm Center distance: 18000 mm Spindle bore: 220 mm Numbers of bed guide ways: 0 Weight between centres maximum: 80000 kg MACH-id   4069 MAKE       Zerbst Germany TYPE         DXP 5 YEAR         1987 SPECIFICATIONS Swing in the gap Ø   6400 mm Distance between centres    18.000 mm Work piece weight      80.000 kg Spindle bore    220 mm Spindle speeds / ranges    22,4 Rpm Power    70 Kw DIMENSIONS Length    25.000 mm Width     15.000 mm Height    10.000 mm

Double swivel crane Saleg swivel crane Zasche GSX 2x500-4,5 Complete Saeule + 2x swivel arm + 2x chain hoist Crane hook height 3.5m / swivel arm length 4m Saeule with 2 swivel arm holders each 500kg load capacity Stroke designation RUDK / ub speed 4 m/min Total usage 611 hours / usage reserve 988 hours

Other Info: CNC Double Coloumn Measuring machine MAKE   ZEISS West Germany TYPE    UMC 850 S YEAR   1995 DIMENSIONS Length    2400 mm Width     1900 mm Height    3050 mm X Travel      : 1.400 Y  Travel      : 1.200 Z Travel      : 600  Distance between column : Vertical daylight   :    780 Table length         : 2.120 Table width          : 1.400  Over all dimensions  Length        : 2.200 Width         : 1.900 Height        : 3.030 Weight       : 3. ...

Technical data: -maximum pressing force 40 t -maximum piston stroke 500 mm -Hoisting speed 0-40 mm / s -Return 0-200 m / min -Mounting height 750 mm -Projection up to mid slide 360 mm -Slide clamping surface 440 x 360 mm -Slide clamping pins 40 mm -Table size 630 x 500 mm -Table hole / breakthrough 200 mm -Table height above floor 710 mm -Oil quantity approx. 300 ltr -Drive 400 V / 4 kW -Space requirement approx. B H 1200 x 2800 X 1600 mm -Weight approx. 2500 kg

Technical data: -Load capacity 30 kg -Faceplate diameter 280 mm -Faceplate swivel - faceplate RPM elect. infinitely variable - re + Li - run -Foot switch -Transmission of welding current 300 A -Drive 220 V - table height in horizontal position 360 / 890 mm -mobile base -3 jaw Chuck -Space requirement approx. B 550 x H 890 x T 550 mm -Weight approx. 50 kg

I have blades with Group teeth for subsequent cutting machine and a feed rate of Volmer

Technical specifications: automatic raw water supply: Exchange pump, frequenzgeregeltFördermenge: 40 m ³/hFörderdruck: barLeistung 2.5: 7.5 kWVorfiltration: Selbstreinigender filter with automatic SteuerungFilterfeinheit: 300 µmMaximaler flow rate: 40 m ³/hFlockungsstufe: flocculation tank: 2 x 0,5 m³ (material PP) charging pump, frequenzgeregeltFördermenge: 40 m ³/hFörderdruck: barLeistung 2.0: 5.5 kWRührwerke FlockungsbehälterDosierstelle for flocculant: static mix / Rohrflockulator (material PP) ) Ultrafiltration: number of UF modules: 8 Stck.Modulanordnung in the rack (x-series): 2Filterfläche of the UF modules: 60 m ² Backwashing and chemically supported backwash: Backwashing medium frequency-controlled RückspülpumpeNeutralisation: neutralisation tank: Material PENutzvolumen: 5.0 m³ material, shaft and stirrer: beschichtetDosierstationen steel: ...

A mobile ultrafiltration system is sold in a 20ft container with equipment: - Ultrafiltration modules type dizzer CL (Inge GmbH) - Backwash template 2.6 m3 - Pre-filter 300 ?m - Measurements for turbidity, conductivity and pH - PLC type T-Box for fully automatic control of the system - Operation of the system on site via touch panel as well as remote access via based visualization - automatic chemical dosing Additional additional modules can be purchased as an option: - 20ft expansion container with 12 additional UF modules - 20ft container with sewage and neutralization tank

ZOLLER SMILE / PILOT 3.0 presetting and measuring machine was manufactured in 2019 in Germany. The machine is a professional tool measuring and presetting device, whose easy operation and precision guarantee flawless results. A telecentric lens and a CCD camera with integrated LED ring for measurements in reflected light (blade inspection) are used to perform the measurements. ZOLLER SMILE 420 is equipped with the CNC controller ZOLLER »pilot 3.0« and functions such as automatic blade recognition, measurement of radial run-out and axial run-out, maximum contour function and cutting edge control. The tool to be measured can have a maximum length of 420 mm and a maximum diameter of 420 mm. Specifications of the ZOLLER SMILE / PILOT 3.0 presetting and measuring machine - maximum tool length Z: 420 mm - maximum tool diameter D: 420 mm - diameter measurement according to Abbe’s p ...