z blade mixer used for sale

used shredder / shredder Manufacturer: ZENO Type: ZTLL 1600 x 1600 Year of construction: 2018 Operating hours: approx. 400 Specifications: Drive power: 2 x 55 kW Sieve: 35 mm hexagonal Screen design: solid screen basket, reinforced with ribs, including sieve quick-change device Counter knife: with cutting gap adjustment Hopper: 1,075 mm high, without lid with maintenance door and level sensor (Sonar Bero) Transmission: Compact gearbox with torque cut-off Filling opening: 1,600 x 1,600 mm Rotor speed: approx. 80 - 120 rpm Rotor aircraft: 600 mm Rotor design: 4 rows (76 pieces) positive inserts 60 x 60 mm on tool holders Rotor bearing: Standing bearing Machine floor and slide bottom: grooved Weight: approx. 13,400 kg Universally applicable shredder for a wide variety of materials The ZTLL shredder is the result of more than 35 years of kn ...

Gear motor, electric motor, three-phase motor -Speed: 4000/471 n/n1 -Power: 0.19 KW -Construction. B5 angle -Diameter shaft: 11 mm -Dimensions: 270/200/H130 mm -Weight: 5.5 kg

Conveyor belt, belt conveyor, transport belt, belt conveyor -Belt width: 2x 50 mm -Width: adjustable -Conveyor belt length: 1440 mm -Drive: 0.37 kW -Speed: 71 rpm -Conveyor belt rotatable via servo motor -Height: adjustable -Dimensions: 1440/550/H950 mm -Weight: approx. 150 kg

1 HOZA (Germany) pinking machine type ZEN 80 (Zigzag cutting), knife width 820 mm, working width up to 800 mm, new serrated knife with 6 mm serration gauge, machine equipped with precise hand lever feed mechanism, feed mechanism settable for 2 measures between 0-320 mm, with security light guards, 3 x 380 V, 50 Hz

Dear's Sale, used 4 diesel engine WARTSILA 12 ZAV 40 S Brgds Hakan KUSCU +905323642509

Skin area: 345 x 495 mm Part size: Max. approx. 120 mm Carton size: 345 x 495 mm Film width: 390 mm Including roller punch / cylinder punching machine Illig ZSM60 Contact details for ordering SKIN foil and cardboard available. Prior sale reserved - errors possible. Internal Reference Number: D-1149

Gear motor electric motor Electric gear motor -Speed: 165 rpm -Power: 0.33 kW -Construction: B5 angle -Diameter shaft: 15 mm -Protection class: IP 44 -Price: per piece -Number: 1x available -Dimensions: 360/180/H190 mm -Weight: 11 kg

Ball valve, ball valve internal thread -Pressed brass -Internal thread: 2 inches -full: passage, full ball -Number: 63x ball valves available -Price: per piece -Weight: 2.1 kg

capacity 90 degrees: round: 220 mm capacity 90 degrees: square: 210x210 mm capacity 90 degrees: flat: 230x185 mm : 150 mm : 150x150 mm : 150x210 mm : 90 mm : 90x90 mm : 90x100 mm dimensions of saw-band: 2450x27x0,9 mm cutting speed: 35/70 m/min work height max.: 915 mm : 265 mm total power requirement: 1,2 kW weight of the machine ca.: 240 kg dimensions of the machine ca.: 1550x870x1740 mm Zimmer Z241 / R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After cutting, the machine stops by a safety limit switch. The lowering is infinitely adjustable via a hydraulic system. Lifting the saw arm after cutting can be done in any position. The saw arm stops at the desired position. Standard features: - Hydraulic cylinder - emulsion pump - Eccentric tensioner - Underframe - saw blade - 400V plug 16A The data for this ad was created with ModulMWS - the software solution of LogoTec ...

geared motor, electric motor -Speed: 40/80 rpm -Power: 0.6/1.0 kW -Design: B5 -Shaft diameter: Ø 48 mm -Protection class: IP 44 -Price: per piece -Quantity: 1 available -Dimensions: 655/250/H320 mm -Weight: 53.5 kg

Gear motor, electric motor -Speed: 40/80 rpm -Power: 0.7/0.91 kW -Construction: B5 -Shaft diameter: Ø 48 mm -Protection class: IP 44 -Price: per piece -Number: 1x available -Dimensions: 685/240/H320 mm -Weight: 60 kg

Spindle for plate boring mill, table boring mill, boring mill, milling machine, quill, boring head, Replacement spindle -SK50 holder for: screwing onto the faceplate -Adjustment: SK50 -Dimensions: 220/220/H160 mm -Weight: 20 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 63 rpm -Power: 0.8 kW -Construction: B3 -Shaft: Ø 38 x 80 mm -Protection class: IP 44 -Dimensions: 450/250/H280 mm -Weight: 36 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 16/31.5 rpm -Power: 0.3/0.55 kW -Construction: B3 -Shaft: Ø 48 x 110 mm -Protection class: IP 44 -Number: 1x available -Price: per piece -Dimensions: 580/250/H270 mm -Weight: 43 kg

Gear motor, electric motor -Motor comes from: Gansow scrubber dryer -Connection: 24 volts -Speed: 160 rpm -Power: 1 kW -Shaft diameter: Ø 25 mm -Number: 8 available -Price: per piece -Dimensions: 390/140/H160 mm -Weight: 13 kg

scoring head, glass cutting table, glass cutting table, glass cutting machine -Number: 21x scoring heads available -Manufacturer: Eitzenberger Luftlagertechnik GmbH -Item no.: 093329 -Price per piece -Dimensions: 310/160/H60 mm -Weight: 0.5kg/pcs

Circuit board for glass cutting table, glass cutting table, glass cutting machine -Manufacturer: INNOLAS -Type: ZSB circuit board Impala 6x -Weight: 0.1 kg

Conveyor belt Stollen belt Conveyor belt Flat belt, mobile, mobile used Manufacturer: andre zalkin & co Type: ECT Conveying length: approx. 3000 mm Width: approx. 200 mm Funnel approx. 1100 x 1100 mm partly stainless steel Belt channel with Plexiglas cover mobile Foldable Drive with gear motor Total dimensions: approx. 4500 x 1200 x 1200 mm

Safety switch, safety switch, TZ -Type: AZ 16 ZVK-M16 -Protection class: IP 67 -Number: 34x available -Price: per piece -Dimensions: 90/51/H30 mm -Weight: 0.1 kg

capacity 90 degrees: round: 240 mm capacity 90 degrees: square: 240 x 240 mm capacity 90 degrees: flat: 165 x 210 mm : 195 mm : 185 x 185 mm : 130 x 190 mm capacity 60 degrees: round: 120 mm capacity 60 degrees: square: 85 x 85 mm capacity 60 degrees: flat: 85 x 120 mm Motor output: 1,2 kW : 170 mm : 145 x 145 mm : 60 x 195 mm cutting speed: 36 + 72 m/min dimensions of saw-band: 2725 x 27 x 0,9 mm : 315 mm work height max.: 900 mm Weight: 330 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tapping machine, pipe thread cutter -for: pipe size max. 2 inches -Cutting jaws: 1/2 , 3/4, 1 , 1 1/4, 1 1/2 -Dimensions: 510/360 / H240 mm -Weight: 64 kg

Thread cutting machine, pipe thread cutter -for: Pipe size max. 2 inches -Cutting jaws: 1/4 - 2 -Dimensions: 510/360/H240 mm -Weight: 64 kg

Scrap shear dentition attachment for an excavator used MBI ZHEJIANG MANTOVANI MANTOVANIBENNE Type MS22-MC Year: 2020 suitable for multipunch MS22R Overall dimensions: 1100 x 1100 x 500 mm Changes and errors in the technical data, information and prices as well as prior sale reserved

roll diameter: 350 mm : 110 mm bending speed: 1-5 m/min Bending capacity: 157 Wcm³ total power requirement: 7,5 kW weight of the machine ca.: 2950 kg Domestic equipments: - Direct drive of all three shafts - Single delivery of the side rollers - Horizontally and vertically usable - Hydraulically movable side rectifier (via control panel) - 2 digital displays for the feed rollers - Hardened rollers - Mobile control panel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tie rod cylinders, hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston: Ø approx. 50 mm -Piston rod: Ø 25 mm -Stroke: 190 mm -Dimensions: 75/75/H550 mm -Weight: 8.4 kg

Tie rod cylinder, hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston: Ø approx. 35 mm -Piston rod: Ø 20 mm -Stroke: 40 mm -Dimensions: 65/65/H380 mm -Weight: 3.75 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 200 rpm -Power: 0.4 kW -Construction: B3 -Diameter shaft: Ø 28 mm -Protection class: IP 44 -Height shaft axis: 64 mm -Price: per piece -Number: 2x available -Dimensions: 430/172/H225 mm -Weight: 19 kg

Scrap shear dentition attachment for an excavator unused MBI ZHEJIANG MANTOVANI MANTOVANIBENNE Type MS15-MC Year: 2020 Overall dimensions: 1100 x 1000 x 500 mm Changes and errors in the technical data, information and prices as well as prior sale reserved

various twin press impregnation, plate size ~32cm x 45cm, a good condition, immediately available

Tank scissor dentition, scrap scissor bit attachment for an excavator used MBI ZHEJIANG MANTOVANI MANTOVANIBENNE for MS22 Overall dimensions: 1400 x 1300 x 500 mm Changes and errors in the technical data, information and prices as well as prior sale reserved

Bock unit SHGZX7/1860-4 L R448A/449A/404A. Cooling unit BOCK for shock freezer, goes up to minus 40°C Price on request

Sprockets, triplex sprocket, sprocket -Sprocket pitch Triplex: 1 1/4 x 3/4 -Number of teeth: 45 teeth -Diameter: 470 mm -Total width: 140 mm -Tooth width: 18.5 mm -Hole: Ø 125 mm -Number: 4x sprockets available -Price: per piece -Weight: 103 kg / 106 kg -other sprockets in stock

Geared motor, electric motor, three-phase motor -Speed: 19 rpm -Power: 0.045 kW -Design: B5 angle -Shaft diameter: 12 mm -Protection class: IP 54 -Price: per piece -Quantity: 1 available -Dimensions: 225/140/H120 mm -Weight: 3.7 kg

Schaudt ZX11 - Premium Overhauled [RETROFIT] - Compact cross slide CNC grinding machine - Tip height: 180 mm - Grinding length: 600 mm - Control: Siemens Sinumerik ONE or Fanuc - Workpiece weight: approx. 80kg - Workpiece headstock: MK4 - Tailstock: MK4 - Installation dimensions: approx. 2,700x2,400 mm Options: (other options also possible) - Balancing & grinding sensors - In-process measuring device for length & Ø - Dressing spindle for diaform roller - B-axis for swivelling grinding headstock - Automatic door drive - suitable automation - Peak increase - u.v.m. on request / customer request

Zippel crankshaft cleaning system Zippel Crankshaft cleaning system L x W x H = 3520 x 520 x 700 mm Item location: 42859 Remscheid Further cleaning systems in other sizes - new and used - can be found in our shop! International shipping costs on request!

Electric motor, three-phase motor -Power: 0.48/0.3 kW -Speed: 700/1400 rpm at 50Hz -Shaft diameter: 14 mm -Construction: B5 -Protection class: IP 44 -Price: per piece -Number: 2x available -Dimensions: 315/150/H195 mm -Weight: 11.9 kg

Gear motor, electric motor, three-phase motor -Speed: 84 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: 25 mm -Protection class: IP 33/E -Dimensions: 350/170/H180 mm -Weight: 16.2 kg

dimensions of saw-band: 2085x20x0,9 mm capacity 90 degrees: round: 185 mm capacity 90 degrees: square: 150x150 mm capacity 90 degrees: flat: 220x150 mm : 110 mm : 100x100 mm : 110x90 mm capacity 60 degrees: round: 70 mm capacity 60 degrees: square: 70x70 mm capacity 60 degrees: flat: 70x70 mm voltage: 400 V sawband speed: 35 + 70 m/min. : 230 mm total power requirement: 0,75 kW weight of the machine ca.: 195 kg dimensions of the machine ca.: 1280x550x1480 mm Domestic equipments: - stepless, electronic speed control - Optional hydraulically controlled or manual belt arm lowering - Saw arm can be swiveled up to 60 ° right - quick release vice - Band guide with 8 ball bearings - Hydraulic saw blade clamping with clamping pressure display and strip break-off - Including coolant device - incl. machine cabinet The data for this ad was created with ModulMWS - the software solution of LogoTec ...

Gear motor, electric motor -Speed: 125 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 22 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 365/160/H200 mm -Weight: 12.8 kg

Gear motor, electric motor -Speed: 13 rpm -Power: 0.11 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 33 -Number: 1x geared motors available -Price: per piece -Dimensions: 380/170/H180 mm -Weight: 17.5 kg

Spindle drive, Simotics, 1PH8103-1MG02-0BG1-ZNO.YF, Siemens, refurbished-mint condition Special price Used and overhauled! The part was purchased from a spare parts warehouse of a company. The main spindle was completely reconditioned by Siemens and is therefore in a mint condition. - Asynchronous motor, spindle drive - Power: 7,5 KW - 380V / 3 pol. - max. 9000 rpm - max. 77 Nm - max. 42 A - 47 kg Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

Available in stock 1 x Used Bryan Donkin RMG Gas Pressure Regulator RMG-BD226 (FIG 226 ZSO-ECL). Designed primarily for control of fuel feeds to industrial and commercial burners, heater units, boilers and other items of equipment where an accurate, safe and reliable controlled pressure is required. We also have other elements of the gas train available, namely: 1 x Ball Valve DN65 PN16 with pressure switch 2 x Solenoid Valves DN65 PN16 1 x Gas Filter DN65 PN16 The equipment is used but in good working conditions. Outlet Pressure Range: -3 mbar to 3 mbar Maximum Inlet Pressure: 0.1 bar DN 65 PN 16

Feluwa - Pump Condition: functional We can also offer general renovation on request. Spare parts are still available. If you have any questions, please contact us.

Gear motor, electric motor -Speed: 63 rpm -Power: 0.37 kW -Construction: B5 -Diameter shaft: Ø 22 mm -Protection class: IP 44 -Price: per piece -Number: 4x available -Dimensions: 370/140/H195 mm -Weight: 12.8 kg

Gear motor, electric motor, electric gear motor -Power: 0.37 kW -Diameter shaft: 22 mm -Speed shaft: 100 rpm -Construction: B5 -Protection class: IP 54 -Number: 1x engine available -Price: per piece -Dimensions: 370/140/H200 mm -Weight: 12 kg

Gear motor, electric motor -Speed: 125 rpm -Power: 0.6 kW -Construction: B5 -Diameter shaft: Ø 24 mm -Protection class: IP 44 -Dimensions: 365/160/H215 mm -Weight: 19 kg

Bottle washer, make Krones / Zierk, type: KES-2-2-245/22-95, for 24.000 bph, with 22 bottle row, with "Schleicher"-control, built 1992, 10500mm x 3750mm x 3100mm, Weight: 42 to.

Gear motor, electric motor, electric gear motor -Speed: 304 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 44 -Dimensions: 380/200/H190 mm -Weight: 15.7 kg

Gear motor, electric motor -Speed: 63 rpm -Power: 0.55 kW -Construction: B5 -Diameter shaft: Ø 28 mm -Protection class: IP 44 -Number: 1x geared motors available -Price: per piece -Weight: 19 kg

ZAKMET HYPERZAKMET 6000X2500 plasma cutting machine was built in 2008 in Poland. The machine is used to cut pre-programmed shapes in details having a maximum thickness of 38 mm (carbon steel) or 20 mm (aluminium and stainless steel). A powerful HYPERTHERM HyPerformance HPR 130 laser source with a power of 130 A is used for the cutting process, allowing extremely precise and accurate machining to be achieved. The plasma cutting machine has a solidly built work table with a length of 6000 mm and a width of 2500 mm, which can be extended by means of an additional control panel. The plasma cutting machine is also equipped with FASTCAM CAD/CAM software for simple and effective programming of the cut shapes, and a modern HYPERTHERM EDGE CNC controller, which allows for full control of the machine. Characteristics of the ZAKMET HYPERZAKMET 6000X2500 plasma cutting machine - working area  ...