ye used for sale

8-30 mm Still in operation: Yes Available: immediately

Lathe Vertical Type double column KOLOMNA model 1580 L Year of manufacture 1978 Very good condition, Machine dismantled New electrics can be put as for the customer request Location: Rudniki, Poland, Technical details : Max workpiece diameter : 8000 mm Max workpiece high : 3200 mm Max workpiece weight : 125 000 kg Facing chuck diameter : 7100 mm Max ram stroke : 2000 mm Max carriages travel : 4275 mm Table speeds range : 0,22-20,1 rpm Carriages feed range : 0,0352-285 mm/min Carriages rapid feed : 2500 mm/min Transversal beam feed : 300 mm/min Dimensions : 8615x17600x9800 mm Machine weight with electrical unit : 258 000 kg Machine weight without electrical unit : 247 300 kg

Creo Lotem 400 Manufacturer: Creo Model: Lotem 400 Year: 2005 4-page format Plate min.: 381 x 318 mm Plate max.: 750 x 622 mm F Speed: 15 plates/hour fiber head 24 diodes, 830nm Resolution :up to 3556 dpi ,Platewinding 37800 Bacher Control 2000 Punch Workflow ,Creo Prinergy Evo

<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately

<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately

Back-pressure turbine Manufacturer: Fa. KKK First Start-up: 2002 Operating Hours of Turbine: 30,000h Type: CFR5 G6a Power Max: 2500 kW Operational efficiency: 2200 kW Revolution number: 23000 rpm Live steam pressure: 65 bar Live steam pressure temperature: 480 oC Evaporation pressure: 1-17 bar Investments in the year 2002 Entire steam transforming station from 63 bar to 2.5 bar renewed in 2002, El. Generator Leroy Somer, el. Power 2 MW Renewed measuring Entire -, governing and control of the turbine renewed Steam turbine renewed Installed boiler efficiency: Boiler I Hard coal Steam generation: 20 t/h, 63 bar, 495 oC Boiler II Hard coal Steam generation: 13 t/h, 34 bar, 425 oC Boiler III: Combination burner for oil and gas Steam generation: 20 t/h, 17 bar, 285 oC General overhaul of the entire plant from 2002 to 2004 Steam generator renewed automatic cole-loader ...

Used and new sea containers are constantly available in stock ! As a storage container or for transport use (with CSC approval). TECHNICAL DATA Various versions in length 20ft (6m) and 40ft (12m) - Standard (height 2.60m) - High Cube (height 2.90m) - Open Top (tarpaulin cover) - Flat Rack (open platform) - etc. Also available with valid CSC. Dimensions and weights can be found on our website at: torlach.com/clanek/2010102701-container-guide.html Visit Sightseeing is possible at any time and at short notice. Transport Delivery by truck/rail/ship possible at any time. Questions Further details, photos, descriptions and appointments for the visit can be arranged at: Phone: +49 - (0)8654 / 409399-0 e-mail: info@alps-container.com EXPORT / SHIPPING / MONTAGE We have 20 years of experience in the worldwide export of plants and machines. - 6,500m2 bearing with tr ...

Spinner for Agfa Avantra 30 ,30,000 RPM, refrushed 2012, with waranty. We have all Spareparts for Agfa Avantra 25/30/44, AccuSet.. on stock. Don't hasitate to contact us. Available: Yes

Spinner for Agfa Avantra 25,20,000 RPM, refrushed 2011, with waranty. We have all Spareparts for Agfa Avantra 25/30/44, AccuSet.. on stock. Don't hasitate to contact us. Available: Yes

Spinner for ECRM VR 36/46 silver, refrushed 2011, with waranty. Still in operation: No Available: Yes

Used and new sea containers are constantly available in stock ! As a storage container or for transport use (with CSC approval). TECHNICAL DATA Various versions in length 20ft (6m) and 40ft (12m) - Standard (height 2.60m) - High Cube (height 2.90m) - Open Top (tarpaulin cover) - Flat Rack (open platform) - etc. Also available with valid CSC. Dimensions and weights can be found on our website at: torlach.com/clanek/2010102701-container-guide.html Visit Sightseeing is possible at any time and at short notice. Transport Delivery by truck/rail/ship possible at any time. Questions Further details, photos, descriptions and appointments for the visit can be arranged at: Phone: +49 - (0)8654 / 77669-0 e-mail: info@alps-container.com EXPORT / SHIPPING / MONTAGE We have 20 years of experience in the worldwide export of plants and machines. - 6,500m2 bearing with tra ...

Technical details material.: OPS, APET, PP, HIPS, ABS Forming area (VxH): 520 x 400 mms Depth of draw: 120 mms of material thickness (max.): 1.50 mms of technical details heating, moulding and cutting. This machine has the BFS system which allows to cut in place in the forming station Forming area: 520 x 400 mms of Max sheet width: 590 mms No of cycles are very much depending on the product. However we have been producing more different products with up 50 cycles by minute, but they were no deeper than 40 mms. All movements are 140 mms with a recommended max. depth/hight of 120 mms We have been producing OPS, APET, PP, HIPS and ABS on the machine. The read few years mainly HIPS and APET The thicknest material we have been producing, were 2.0 mms HIPS, but I wants recommend more than 1.5 mms HIPS.

Agfa Aphis Board for new PCI. We have all Spareparts for Agfa Avantra 25/30/44, AccuSet.. on stock. Don't hasitate to contact us. Still in operation: No Available: Yes

in 2013 refurbished Still in operation: Yes Available: immediately

4-color format: 1300 mm<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately

Vertical CNC centre lathe, uses / outdated machine type: Emag VSC 200 control: Siemens 840 C construction year: From the in 1995 to the in 2007 overtakes TECHNICAL DATA: speed area / speeds: [1 / min].: 6,000 Drehmoment:/torque [Nm]: 480 Max dreh-? over bed swing diam .: 290 mms impulse achievement / power: [kW] 34 feed ? / chuck diam. 200 mms revolver / turret: 12-fold, VDI 40, shoemaker powered work witness / driven tools 7.8 kW Verfahrwege: X axis / x-travel: 550 mms Z-Achse/z-travel: 200 mms express way / rapidly travel: (X/Z) [m / min] 30 / 20 prepush / feeds: (X/Z) [m / min]. 11 KN connected load: [KW] 36 kW machine weight: [kg] 6,500 equipment signs: filings sponsor / chip conveyor, crowd

Format: 59 x 74 cm<br>Perfection 8/0 - 4/4 Color Pilot Plus Ink Control AIR Center (Rietschle) Technotrans temperation Technotrans Combi cooling device with external capacitor Washing machine device for pressure cylinders Quickstart Low Cover Stabilization Powder (Hitronic) Inline Observer Optiprint Jacket Preparation Color temperation Non-Stop Semiautomat Delivery<><br>Still in operation: Yes<br>Verf Gbar: Immediately

Manufacturer: PAMA, Italy Model: AT 130/3 CNC Year of manufacture: 1996 Control: CNC SIEMENS SINUMERIK 828 Condition: Excellent, complete, machine will be equipped with a new CNC control SINUMERIK 828! Location: Machine in our warehouse Rudniki, Poland. Technical details Spindle diameter: ø 130 mm Rotary table: 1600 x 1600 mm Table capacity: 12000 kg X axis travel: 2500 mm Y axis travel: 2400 mm Z axis travel: 750 mm W axis travel: 2030 mm Max spindle speeds: 2200 RPM Main motor Power: 35 KW ATC magazine: 100 pcs Rapid feeds: - X- 10,000 mm/min - Y- 12,000 mm/min - Z- 6,000 mm/min - W – 12,000 mm/min - B – 2 Gear steps 2 ranges Torque in axes: X- 55 Nm; Y- W-B- 37 Nm; Z- 27 Nm Weight: 35 kg Max. tool diameter with all places occupied: 140 Max. tool length: 600 mm Equipment: - 1 psc.Rotary table - ATC for 100 pcs - APC 2 pcs 1600 x 1600 mm - External  ...

Weight: 1600 kg Bj.new Very nice state of use Package dimensions: 20 x 35 x material quantity Hand control To compress copper, aluminum, zinc, etc. Immediately available. More pictures on request, are not the original pictures Year built: new Weight: approx. 1600 kg Built in: 1997 mechanical condition: very well dimension of the baling press: 20 x 35 x l ength of the material to press manual control materials to press: copper, aluminium, zinc etc. The machine is on stock. Every time we have 8 cablestrippers on stock. new an second-hand machines

Fischer-W.Mueller wind machine type: FMB 4/12-100, 3 layer Coex Blow machine Complete Line control: Moog construction year TMC: In 1998 hose unity snail diameter mm: 50/90/50 mass and weights dimensions LxBxH m: 7.4 x 7.7 x 2.4 machine weights kg: 14,300/5.000/11.000 other Data Sheet: FISCHER FMB used 4/12/100 3 layer Coex Blow machine Complete Line Year: In 1998 Location: Mülheim / storage fire: Model FISHER W.Mueller: FMB 4/12/100 land: For Sale Availability: Immediate Technical details of container with the current configuration: 1 l Number of heads: 12 materials: PE Number of stations: 2 extrusions type: Continuous Number of extruders: 3 2 x 2.0-50mm Unex Unex 1x 6.0-90 mms Screw diameter: 120 mms of engine power: 22 kW 90 kW of L / D: 24 and 28 Technical details Cycle - 12.6 sec = output / day = 70,000 botles The head included. For more information Availability: I ...

EDGE GLUING MACHINE Manufacturer: OTT Austria Type: Euromatic Year built: 1998 CE standard Function : glue-cap-pre-fraesen-fine-fraesen-round-under-round-copy-zieklinen-pol ishing

Operating hours/ hour 12003 h, Model Netstal Synergy 800 H-110 Year 2001 Control Unit Screw Diameter mm 25 Injection pressure bar 2428 injection volume gr 47.1 Clamping Force ton 80 Tie bars distance mm 410x410 Opening storke mm 350 Dimensions LxWxH m 5.1 x 1.6 x 1.8 Machine Wight Kg 6500

Used and new sea / maritime / transport containers permanently disposable ! For use as storage container and for transports (valid CSC approval). TECHNICAL DATA various types as 20ft (6m) and 40ft (12m) - Standard (height 2.60m) - High Cube (height 2.90m) - Open top (tarpaulin hood) - Flat Rack (open platform) - etc. also with valid CSC available. You can find the dimensions and weights on our website: abc.torlach.com INSPECTION Anytime possible in our warehouse TERM´S OF DELIVERY Ex works Freilassing, 83395 Germany, price incudes loading free on truck. SHIPMENT Worldwide shipment, delivery by truck/rail/ship anywhere and any anytime. Please send us your desired destination and terms for an offer. Do you have any questions We are at your service by below-mentioned contact details, please don´t hesitate to contact us! AlpsContainer Breslauer Str. 4 ...

Model Year Arburg 520C 2200-675 Built Control Unit 11/1998 Steurung Selogica Snail Screw Diameter Mm 60 Spray volume injection volume Gr 474 Clamping force Clamping Force Sound 220 Holmen distances Tie bars distance Mm 520 x 520 Opening path Opening storke Mm 650 Machine Gew. Facilities Machine Weight Equipment Kg 7.200 1fach core train

CNC Vertical lathe GORBREX Model: TKV 512 Year of manufacture: 2016 CNC CONTROL: SIEMENS SINUMERIK 828 Brand new machine, modified of SEDIN 1512 Excellent condition! Machine fully modernized and modified of SEDIN 1512. Machine with new electrical unit, new lubrication unit, painted, slideways regrinded, replacement of worn mechanical parts. Machine will be equipped with new CNC control SIEMENS SINUMERIK 828 Machine will be built on order Delivery Time: app. 2 months Technical details: Turning diameter: 1250 mm Faceplate diameter: 1120 mm Max workpiece height: 1000 mm Max.workpiece weight: - 3200 mm (5...80 rpm) - 1000 mm (250 rpm) Max swivel angle(upper carriage): 45 Max vertical feed(side carriage): 5 Number of ranges of table speeds: 18 Table speed: - min.: 5 rpm - max. 250 rpm Number of ranges of carriage feeds: 16 Carriage feed: - min.: 0.07 rpm -ma ...

Supplier-immersed car spare parts from warehouse dissolution, for export, cheap to hand over. Years built from 1988 to 1995 various brands, such as Audi, VW, BMW, Ford, Opel, Seat, Fiat, Mitsubishi, Toyota, etc. Various car spare parts, such as struts, axle legs, motors, gearboxes, etc. Prices and quantities on request.

Capacity: 125 ton, Strokes per minute: 85-500 / min, Slide: 870 x 550 mm, Plate width: 260 mm, Year of manufacturing: 1980

Used and new sea containers permanently disposable ! For use as storage container and for transports (valid CSC approval). TECHNICAL DATA various types as 20ft (6m) and 40ft (12m) - Standard (height 2.60m) - High Cube (height 2.90m) - Open top (tarpaulin hood) - Flat Rack (open platform) - etc. also with valid CSC available. You can find the dimensions and weights on our website: abc.torlach.com INSPECTION Anytime possible in our warehouse TERM´S OF DELIVERY Ex works Freilassing, 83395 Germany, price incudes loading free on truck. SHIPMENT Worldwide shipment, delivery by truck/rail/ship anywhere and any anytime. Please send us your desired destination and terms for an offer. Do you have any questions We are at your service by below-mentioned contact details, please don´t hesitate to contact us! AlpsContainer Breslauer Str. 41a DE-83395 Freilassin ...

Garage Schalungensanlagen Rothmund / tar we offer two complete used garage formwork The plants come from the assets of an insolvent paver of different concrete elements (ceiling, walls, garages and modules). A. garage formwork 2 Rothmund / tar and ueberarbeitet in 2004 by LAIER 5.62 X 2.78 m length and 2.95 x 6 as a fixed size, including ancillary units with spread rungsanlage to the higher level (B). Garage formwork 1 Rothmund special machines For 6 m, 6.5 m and 7 m garages, width 2.95 m set consisting of: 1.1 Set base frame, 2.1 retractable core with extension length adjustment 3.1 rear rollers wall 4.1 front rollers wall 5.2 Longitudinal walls 6.1 Set scope bracket 7.1 Set formwork for electric gate 8.1 Set hydraulic tensioner (down, sideways) 9.1 Set hydraulic system with control panel 10.1 electrical control cabinet Shaker drive 11 incl. auxiliaries (C). 15 Pallets for precast ga ...

Module formwork system EBAWE / Eilenburg we offer a used module formwork system (year 1996) The plants come from the assets of an insolvent paver of different concrete elements (ceiling, walls, garages and modules). Plant for the production of space modules in the basic sizes 6000 x 2400 mm, the height can be varied from 2,850 3.100 mm. Thus, the maximum floor height is 3,250 mm. Technical description: Taktfertigung manufactured space cells made of reinforced concrete with at least one open long side without soil in different sizes. Window and door openings, as well as large-scale breakthroughs can be provided. The system consists of the following components: 1.1 Module formwork for the production of space modules) -is the form of Chamber for the production of concrete item (space cell) -The two sides are at the stationary side walls arranged swivel -Vibrators are attached to all w ...

Type of machine D 560-3910 NC 3 Type of control NC 3 Year 1990 unit Clamping Clamping force t 560 Opening stroke mm 860 Distance between tie bars mm 800 x 800 Mould fixing platen size h x v 1200 x 1200 Injection unit Screw size mm 95 Injection volume cm3 2450 Injection shot weight in Polysterol gr 2180 Injection pressure increased bar 1600 SIZE AND WEIGHT Dimension LxWxH m 10.6 x 2.1 x 2.3 Total weigt Kg (18000+12000) 30000 Additional information Wittmann Robot W200-282 Model 1990

Vibration table / table We offer: used vibration table / table Condition: good, ready for use Manufacturer: unknown Year of constr.: 1995 estimated Dimensions: Width: 3500 mm Length: 8000 mm Height: 550 mm Steel quantity: approx. 8 mm Weight: estimated 3500 kg Vibration / vibration motors: 6 pieces Manufacturer: Bosch Type: Connection data: 250 V, 3 A; 1.0 KW; 200 Hz Speed: 5700 RPM The supply of vibration / vibration motors via a central frequency converter Bosch (for 2 toggle vibration tables and 6 vibration tables. This when purchasing multiple systems can be purchased: Technical data frequency: Produced for Bosch from the Flender sky / Tübingen Type: 2 GR132/135 (poorly readable) Motor: 11 KW, 380 V, 50 Hz; 22.5 A, 2880 rpm, cos.phi 0,89 Converter sec.: 11 / 12,5 KW; 250 V, 200 Hz, 2 26, 4 / 28; 9 A Control: Bosch Accessories: 2 or 4 forms for dominoes (see photos) More ...

Control NC 4 year of construction 1999 Closing unit Closing force t 25 opening distance mm 350 tie size mm 280 x 280 plate size 390 x 390 injection unit screw diameter mm 22 spray volume cm3 41.7 Spray weight gr 38 Spray pressure bar 2060 Dimensions and weights Dimensions LxWxH m 330 x 140 x 180 Machine weight Kg 1650 Other 2 Pump systems

Sisu/Valmet Engine Type=612DSE,135KW,new factory repair Replacement motor with starter+alternator,new,TOP condition 1 year warranty ! email=info@miw-zeven.de

Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Diesel tank 16,000 liters double-walled used, with a used diesel pump DK 70 EZ: The pump is 1 year young and was overhauled by the manufacturer general. The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder 1 diesel pump DK 70 EZ Container dimensions Length 8,290 mm Diameter 1,600 mm Weight approx. 3,000 kg Of course, you can also use your tank system. We are happy to offer you diesel pumps with a hig ...

Type D 560-3910 NC 3 Control NC 3 Year of construction 1990 Closing unit Closing force t 560 Opening path mm 860 Holm dimension mm 800 x 800 Plate size 1200 x 1200 Injection unit Screw diameter mm 95 Spray volume cm3 2450 Spray weight gr 2180 Spray pressure bar 1600 Dimensions and weights Dimensions LxWxH m 10.6 x 2.1 x 2.3 Machine weight Kg (18000+12000) 30000 Other Wittmann Robot W200-282 Model 1990

SISU/Valmet engine type=612DSE,135KW,6-cylinder series with turbocharger. Motor is complete with starter+alternator,factory repaired. 1 year warranty info@miw-zeven.de

Manufacturer Arburg Type Allrounder 370 C 800-225 Control Dialogica year 1995 Operating hours h 33000 Closing unit Locking force t 80 Opening path mm 500 tie size mm 370 x 370 Installation height min/max mm 250 Plate size 545 x 545 Injection unit Screw diameter mm 30 spray volume cm3 106 Spray weight gr 89 Spray pressure bar 2350 Dimensions and weights Dimensions LxWxH m 4.6 x 1.8 x 2.1 Machine weight Kg 3400 Other Euromap 12

Machine Specification: A Substantial Machine Body, constructed from a robust aluminum extruded base frame with integral frame members that in turn provide the mounting for various auxiliary modules. The base has a stainless steel top cover and end covers that enclose the base frame. The base frame also includes four adjustable feet. A 2575mm Conveyor Assembly, constructed from a stainless steel main section including separate end sections and includes the following features. - A single belt conveyor including belt guides, 100 mm wide running a 80mm wide belt, which ensures smooth running of the product, during labeling. - Driven via a separate drive motor. - A conveyor belt height of 850mm - 1OOmm wide. - Conveyor section is separated from the machine body to allow easy access for cleaning. - Crowned rollers for easy belt tracking. Year : 2003 in perfect working condition ...

: Plant used separation / separation system Manufacturer: Schauenburg Type: MAB 200 Year of construction: 1991 1: mixture task box DN 150 Usage: for the slurry task on the average grading railway of the Schwingentwässeres Execution mixture task box: welded and bolted steel sheet construction with a 10 mm strong LINATEX lining and a removable, with 20 mm LINATEX baffle wall. Inlet port: DN 150 flange, born after DN 10 2: Schwingentwässerer type 1240 Machine number: 1127 Dimensions: Width 1200, length 4000 mm Execution: The sieve bin and the actuator yoke, welded and bolted steel construction with one-piece side, rear window, dropping snout rubberized. Drive unit: 1 double unbalance Exciter type S3, 1 drive motor 7,5 kW, 1000 rpm, design B3 3: screen surfaces Classification: single-track plan screening surface width 385 mm, stoma lengthwise in the direction of request, gap width  ...

Thread cutting power M 2 - M8 Speed: 700 rpm, luf requirement: 750 l/min, pressure 6 - 7 bar, working range extension: 300 - 1900 mm, Afbau parallel arm: stable arm structure made of hard aluminium profile (38x29) Weight: 23 kg, adapter holder: TCS 1 B - incl. 6 safety slip couplings according to your choice year: 2009

used, kpl. 1 year warranty, plate size 800 x 800 mm, 95 plates, closed drain ( 4-hole), 30 mm cake thickness, pressure 15 bar, capacity approx. 1350 liters, filter area 95m2, dimensions 7500 x 1300 x 2000 mm, weight approx. 7 to

automatic CUTTING BORING and MOULDING machine BACCI TTF1 2TM . second hand machine working conditions : Excellent hydraulic drive of all the movements volt. 380/50 CE mark : YES Machine suitable for assembling part of chairs, tables, frames, furniture, wheelchair frames, etc. The BACCI TTF1 2TM performs the operations of cutting , milling and drilling at the end of the piece, either singularly or differently combined . the milling unit is composed of n.02 spindle moulders ( anti-splinter system ) machine composed by 3 working units : 1- Cutting unit : circular saw max.diam. mm.400 motor power Hp 3 2- Boring unit : boring head with 5 mandrins motor power Hp 3 3- Moulding unit . with automatic movement of the carriage on recirculating ball bearings n.02 spindle moulders (anti-splinter) motor power Hp 7,5 spindle diam. mm.35 hydraulic unit motor power Hp 2

1 x Francis Shaw Model K6 Intermix, Original year of manufacture: 1977, Rebuilt body fitted by Carter serial no. 242.93, Year: 1993, Hydraulic drop door discharge, Mixing chamber volume: Approx 112 litres Pneumatic hopper, 750HP, slip ring motor, 3ph, 50 Hz through Sturdigear 1460/15.7 rpm reduction gearbox (1000HP rating). Complete with hydraulic unit + operator controls etc and in very good condition.

Generators 16kVA Make/type: KR-16spezial Continuous average power (kVA): 16 Engine make/type: Kubota / D1105 EK2 Speed: 3000 rpm Speed control: Mechanical Generator brand / Type: Leroy Somer / 3748 J6/2 Voltage: 230/400 Volt, 50 Hz Control: Start/stop control panel with insulation monitoring and digital display Trailer: 2.5 to tandem car chassis with adjustable drawbar, overrun brakes, 4 piece parking jacks on each side Accessories: Device box with lockable handle Socket combination: 3 piece Sockets individually fused with machines 1 piece CEE Socket 16 amp. 5-pin machines protected Sockets lockable door Condition: used without guarantee, year of construction 2009, hours less than 250 hours

GLIMEK Dough Divider SD-180 - exhibition machine, brand new condition, year of manufacture: 2024 - working range 50 - 1.000 g, 120 - 1.600 g or 180 - 2.300 g, capacity range 750 - 1.800 pieces per hour, frequency converter drive for infinitely adjustable machine speed, 90 liter hopper made from stainless steel, machine covers made from stainless steel, mechanical flour duster made from stainless steel power supply: 1.1 kW, electrical supply: 400V/50-60Hz/3~

Producer Engel Type of machine ES 3500/500 with Engel Robo Type of control CC 90-A 02 Year 1990 unit Clamping Clamping force t 500 Opening stroke mm 850 Distance between tie bars mm 800 x 800 Installation height min/max mm 310/800 Mould fixing platen size h x v 1200 x 1200 Injection unit Screw size mm 80 Injection volume cm3 1960 Injection shot weight in Polysterol gr 1840 SIZE AND WEIGHT Dimension LxWxH m 5.0 + 5.4 x 2.4 x 2.6 Total weigt Kg 37,000 Additional information -Angel ERC 53/1 CL Robot model 1999 -Screw is 2 year old

Cauldron standing on 4 wheels Manufacturer: Appointed Serial No.: -. Year of construction: 1971 Volume: 150 LTR. Material: 1.4541 In the pressroom: Operating pressure: 5 bar Capacity: 20 LTR. Operating temperature: 158 ° C In the loading space: Content: 150 LTR. Operating temperature: 100 ° C Dimensions: Bowl ø: approx. 540 mm Interior height front: approx. 640 mm Interior height rear: 580 mm L x W x H: 700 x 700 x 1,100 mm (with wheels) Containers with heating jacket with sloping to the spout, tank outer shape rectangular, marbled at top: 1 hinged lid approx. 600 mm diameter with hinge and handle on the front: 1 temperature display 1 valve 1 " 1 spout DN 32 with shut-off valve at the back: Heating valve

used, kpl. 1 year warranty, plate size 800x800 mm, 50 plates, open drain, 25 mm cake thickness, pressure 15 bar, capacity approx. 660 liters, filter area 53m2, dimensions 5500 x 1600 x 1200 mm, weight approx. 5 to

used, kpl. 1 year warranty, built in 1994, plate size 800x800 mm, 60 plates, open outlet, 25 mm cake thickness, pressure 15 bar, capacity approx. 800 liters, filter area 64m2, dimensions 5500 x 1500 x 2200 mm, weight approx. 6 to