ye i used for sale

Code: 0228 Brand: OMS SALVARANI Model: 300 INVINCIBILE Pneumatic double croscutting machine for cutting wood, frames, fixtures, joinery, furniture, and various other materials Technical data: Working length mm 3000 Blade diameter mm 300 Motor power Hp 2,5 - Rpm 3000 Manual movement of the 2 heads Cutting from 0 to 45° right and left Pneumatic pedal for lowering the heads N° 2 pneumatic clamps for locking workpieces N° 2 suction ports diameter mm 50 Compressed air 6 bar Overall dimensions mm 4000 x 700 x 1250 h Weight kg 520

Control Mazatrol T-Plus Max. turning diameter 470 mm Max. swing diameter 575 mm Turning length 1,500 mm Spindle speed 3,000 min-1 Magazine for 40 Wkzg. (KM 63/SK 40) B-axis Y-axis Bezel Tailstock Chip conveyor

A complete bottle filling and capping line is available. Ring bowl diameter: 960mm, filling valve count: 24, capping stations (KK): 6, capping stations (SV): 6, capper diameter: 240mm, filler and capper pitch: 125mm, filling capacity (0.5l): 6000bottles/h, bottle volume: 330ml/500ml, operating hours: approx. 7200h. An on site inspection is possible.

Key data: 1770 A, 1220 , 70

The OPS INGERSOLL EDM machine GANTRY 1200 HSJ / 64 bit, built in 2006, has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts have been carefully checked. The following overhaul work was carried out on the above-mentioned machine: Replacement of ball screw and ball bearings of the X, Y and Z axis. Replacement of all (4) ball screws of the tank drive. Inspection and test of the C-axis for tightness and accuracy Geometric verification of all axes according to OPS INGERSOLL protocol. Basic cleaning of the complete machine base. Cleaning of the complete working tank including replacement of the felt scrapers. Complete painting of the machine. Overhaul of the dielectric pumps. Replacemen ...

Key data: 750 mm, 650 mm, 60 A

Refurbished OPS Ingersoll Gantry 500 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

Welding Fume Filter, Tebaron, TE 1200 – used - : Prices from location: 650.-€ (net) Manufacturer: ISI Industrie-Produkte GmbH Type: TE 1200 Year of Make: 1991 380V, 1.1kW, 2.6A, IP54 Rating: good Available: immediately Location: Waltrop

Key data: 1000 A, 760 , 60

Refurbished OPS Ingersoll Gantry 800 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

Key data: 1000 A, 760 , 60

Refurbished OPS Ingersoll Gantry 800 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

In working order. Power: 157 kW (213.46 hp) Serial Number: CATIT62HEM5G00603

2011 OPS Ingersoll Gantry Eagle 5 (often referred to as the Eagle G5 or Gantry Eagle 500) is a high-precision Sinker EDM (Electric Discharge Machining) machine. Feature Specification X / Y / Z Travels 525 mm / 400 mm / 450 mm Work Tank Type Drop-tank (rises/falls for easy access) Max Workpiece Weight 1,000 kg (2,205 lbs) Generator Eagle PowerSPARK (60 Amp standard, 110 Amp optional) Z-Axis Jump Speed 18 m/min (This is exceptionally fast for EDM) Find more here - / Contact us at -

From a current disposal, we offer you an IVECO Eurocargo truck with box body from Humbaur. Year of Make: 2019 Registration date: 24.04.2019 Condition: Satisfactory KM: 303.000 Asking price: 22.500,00 VHB Equipment / accessories / other information: Asset Manager: M. Vorkötter Phone: 0202-25727-3152 Mail: m.vorkoetterakf.de We will be happy to provide you with details upon request. Location: 67240 Bobenheim-Roxheim The sale is without warranty Subject to prior sale

WEYHMÜLLER CBU-ISO 10332 automatic COMBIPACK Machine for the application of Pre-Printed Blanks onto Round Cup/ Rectangular Container Walls,, Age 2017 only used for ca. 8000 hrs., The Combipack Thin-Walled Cup/ Containers (Products) use up to 60% less material than conventional thermoformed Products, the applied paper Blanks provide stability & strength. The Paper Blanks can be easily separated for recycling purposes., Machine Consisting of:-, • Elevator Tray Feeder, • Cup/ Container In-Feed Conveyor, • Universal 4 x Screw Denester, • Indexing Turret with 8 x Mandrels, • Turret Indexes to:, Cup/ Container infeed Station, Blank Feeder Station, Glue application Station, Blank Forming/ Folding Station, Glue Drying Station, Cup/ Container Bottom Labelling Position, Counter/ Stacker Station, • Pre-printed Blanks horizontal accumulator In-Feed Conveyor to:, • Vertically stacked B ...

Packaging line for briquettes/pellets air pressure 6 bar voltage 400V power 20kW weight 800kg

This 12s Index MS42C was manufactured in 1998. It features a maximum bar diameter of 42 mm and operates with a fully automatic system, making it suitable for high-volume precision turned parts. The machine is equipped with a Siemens SINUMERIK 840C control system and AC servo drives, ensuring efficient performance. Consider the opportunity to buy this Index MS42C automation equipment. Contact us for further details.

Key data: 65 mm, 660 mm

Control: SIEMENS Spindle passage: 65 mm Max. speed: 6,000 1/min Sub-spindle Z= 700 mm TOOL CARRIER 1 with milling spindle Milling spindle: 7,200 1/min B-axis 360° 14 stations with powered tools Speed Tools 7,200 1/min Travel: X= 230 / Y= +- 65 / Z= 845 TOOL CARRIER 2 14 stations with powered tools Speed Tools 7,200 1/min Travel: X= 140 / Y= +- 45 / Z= 810 Chip conveyor Filter Bar feeder INDEX MBL

Key data: 1000 KW, 800 kVA, 400 V

Jenbacher 416 Biogas 80,000 operating hours incl. Diane XT4 incl. control system

Infrico Medcare LTF 90S Laboratory Freezer The Infrico Medcare LTF 90S is a professional ultra-low temperature freezer from the Lab Care series from the Spanish manufacturer Infrico It is specially designed for use in laboratories and medical facilities to safely store samples at extremely low temperatures Technical features The LTF 90S is characterized by high temperature stability and precise control According to Infrico Medcare, the LTF series offers the following standard specifications: Control: Equipped with a digital controller and an intuitive touch screen Precision: Temperature stability is around ±1°C, with uniformity of less than ±2°C Alarm system: Has visual and audible alarms for temperature deviations, sensor faults and open doors Cooling: Use of natural refrigerants (such as R290 in newer models) for improved energy efficiency and environmen ...

STRAND PELLETIZER 250 mm., Variable pitch, with synchronized pull off unit, 4 kW motor, 4 poles, IE3 motor drive, 1.1 kW motor on pull off unit, Transmission belts, Speed variation via inverter, Electrical panel compliant with CE standards - 400 V, 50 Hz with, 2 x 16 Amp sockets, width 250 mm, Rotor with 12 micrometrically adjustable rotating blades, Counter-blade made in widia, Hardened pressure roller, diameter 60 mm, straignt knurling, Hardened drive roller, diameter 40 mm, straight knurling, Pneumatic piston for presser roller adjustment, Chrome plated parts in contact with the material, Stainless steel discharge, Limit switch with safety lock, Mounted on anti-vibration support with sound proof panels, installed power - used power in work: about 60-65% : 5,1 kw, availability: 70 working days ca, working width: 250mm, conditions: new machine, type: strand pelletizer for extruders

STRAND PELLETIZER, For extruders 500 to 1500 kg/h, width 350 mm., fixed pitch, Counter-blade with 2 cutting edges,, 11 kw drive Supporting structure made in sturdy steel with sides made in special alloy. Group of dandy rolls to guide the streams Lower roll in cemented steel Upper, pressing roll made in nitrated steel, pneumatically lifted Asynchrone drive with inverter Cutting unit with dual cutting edge Made in anti-wear steel Electrical control panel with general switch,service switch and amperometer Adjustable speed Rotor diam. 240 mm. N.28 teeth on rotor Include n.1 extractor, User’s manual, CE compliance, installed power - used power in work: about 60-65% : 11 kW, availability: 60-70 working days ca, working width: 350, capacity: 500 to 1.500 kg/h, conditions: new machine, type: fixed pitch

The machine is in good technical condition, after prior agreement it is possible to test it. Operating hours: 12,041h Parameters: Control system: MAZATROL MATRIX NEXUS Worktable length: 1300 mm Worktable width: 530 mm Spindle drive power: 11 kW Speed: 12,000 1/min X-axis travel: 1050 mm Y-axis travel: 530 mm Z-axis travel: 510 mm Taper: ISO 40 Number of positions in the magazine: 30 pcs Machine weight: 7100 kg

Code: 0300 Brand: CASADEI INDUSTRIA Model: V320 - CE Standard Automatic edge bander for pre-glued edges, for carpentry, furniture, custom-made furnishings, doors, panels and various items - CE Standard Features: Automatic upper feeder with toothed belt, speed 5 mt/min, height adjustable by means of handwheel with numerical position indicator Infeed guide Pneumatic coil cutting shear Automatic front and rear pneumatic end trimmer Upper/lower end trimmers at 11000 rpm with cutters Z4 Work surface 1800 mm with 7 adjustable rollers and polyzene slide guides Extendable front support for large panels Technical data: Min/max panel thickness 10-45 mm Edge thickness in coil 0,4-2 mm Min panel length 220 mm Min panel width 110 mm Gluing unit: Blower power LEISTER W 3400 - Temperature adjustment Total installed power 2 kW Suction port diameter 120 mm Overall dimensions m ...

General SKU257X240 MakeC.G.C. Impianti LocationBarneveld Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume11630 Ltr. Motor8 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4435 (316L) Stainless Steel Reactors Reactorcheck Capacity11.630 l. Vessel sizesDia. 2200X3450 mm Dished bottomcheck ManholeDN400 Top connectionscheck OutletDN35 With jacketcheck Max. temperature190°C With propellor stirrer3-fold Motor8 kW (380 V, 1440 rpm) Speed mixing shaft55-110 rpm Information No.101 Year of construction2001 Floorspace2,70 X 2,70 m Total height4,55 m Weight3800 kgStainless Steel ReactorsNew arrivalsC.G.C. ImpiantiReactors > Stainless Steel ReactorsNew arrivalsBrand > C.G.C. Impianti What you can expect from Foeth: -- Machine is in working condition -- At a reduced  ...

General SKU257X239 LocationBarneveld MakeC.G.C. Impianti Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume11630 Ltr. Motor9 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4435 (316L) Stainless Steel Reactors Reactorcheck Capacity11 630 l. Vessel sizesø 2200 x 3450 mm Dished bottomcheck ManholeDN 400 Top connectionscheck OutletDN 35 With jacketcheck Max. temperature190 °C With propellor stirrer3-fold Motor9,0 kW (380 V, 1440 rpm) Speed mixing shaft55—110 rpm Information No.100 Year of construction2000 Floorspace2,70 x 2,70 m Total height4,55 m Weight3800 kgStainless Steel ReactorsNew arrivalsC.G.C. ImpiantiReactors > Stainless Steel ReactorsNew arrivalsBrand > C.G.C. Impianti What you can expect from Foeth: -- Machine is i ...

General SKU427X1332 LocationBarneveld CEcheck MakePacko INOX NV — Diksmuide Belgium Pressure Working pressure1.6 Bar Main Features MaterialStainless steel Volume10000 Ltr. Motor1.5 KW Specified Features - Centrifugal Pump MaterialStainless steel 1.4401 (316) Centrifugal Pumps Pumpcheck Number of pumps:1 Capacity10 m³/h With motor1,5 kW (400 V, 1470 rpm (Ex)) Inlet40 mm Outlet50 mm Information TypeICP2/32-125/152 Mach.No.189835 Year of construction2011 Floorspace0,25 x0,5 m Total height0,35 m Weight30 kg ATEX compatiblecheckCentrifugal PumpsPackoPumps > Centrifugal PumpsBrand > Packo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machine ...

General SKU292W1597 MakeTransitherm LocationBarneveld TypeAD2000 Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell6 Bar Vacuum possible shellcheck Working pressure tubes10 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface25 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4571 (316Ti) Heat exchangercheck Horizontalcheck Heating surface25m² Tube capacity235 l. Number of tubes:91 Tube diameter25 mm Tube length3700 mm Max. temperature0°C/+300°C Shell capacity210 l. Shell diameter400 mm Shell length3840 mm Max. temperature0°C/+300°C Shell with expansion jointcheck Shell connectionscheck Information No.11043 Year of construction2004 Mounted on legscheck Floorspace0,70 x 0,70 m Total height1,20 mShell and tube heat exchange ...

General SKU347W887 MakeZanchetta / Ima LocationBarneveld CEcheck TypeCyclops Mini Main Features MaterialStainless steel Volume300 Ltr. Motor2.2 KW Specified Features - Tumbler mixer Tumbler mixercheck Capacity30-300 ltr With motor2.2 kW (400 V, 1430 rpm (Ex)) MaterialStainless steel Information No.V2C001 Year of construction2008 With switchgearcheck (0.53x1 m) Floorspace1.90x 1.20m Total height2.24 m Weight1560 kg Extra SpecificationsCapacity of standard containers: 30-300 ltr (containers not included) Recommended filling coefficient: 30-75% Maximum working load (bin + product) 250 kg Rotation speed: 4-20 rpm Tumbler mixersIMA ItalyMixers > Tumbler mixersBrand > IMA Italy What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machin ...

General SKU337U832 MakeIpros doo Posoda LocationBarneveld TypePosoda 80 L Pressure Working pressure0 Bar Working pressure jacket6 Bar Main Features MaterialStainless steel Volume80 Ltr. Motor0.37 KW Specified Features - Stirring vessel Closed stirring vesselcheck Capacity112 ltr Vessel sizesDia. 450x500 mm Dished bottomcheck Dished top sidecheck With covercheck DN 400 Top connectionscheck 30 mm Outletcheck 20 mm With jacketcheck Volume 17 Ltr. Max. temperature80ºC With propellor stirrercheck magnetic stirer Motor230/400 volt, 0,37 kW, 925 rpm Speed mixing shaft925 rpm MaterialStainless steel 1.4301 (304), Stainless steel 1.4404 (316L) Information No.P342/04 Year of construction2004 Mounted on legscheck with wheels With switchgearcheck Floorspace0.78x0,78 m Total height1,2 m Weight290 kgStirring vesselsIpros dooStirring vessels > Stirring vesselsBrand > ...

General SKU231U211 MakeInterplast LocationBarneveld TypeMEX Main Features MaterialStainless steel Volume750 Ltr. Motor15 KW Specified Features - Ribbon blender Ribbon blendercheck CapacityCa. 750 ltr Trough sizes1400 x 900 mm With covercheck with funel Inlet600 x 600 mm Outlet200 mm Motor15 kW, 380 volt, 1455/125 rpm Speed mixing shaft25 rpm MaterialStainless steel 1.4301 (304) Information No.0151 Year of construction1992 Mounted on framecheck (mild steel) Floor space2 x 1,2 m Total height2,6 m Weight1500 kg Extra SpecificationsAxle diameter 25 mm Ribbon blendersInterplastMixers > Ribbon blendersBrand > Interplast What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Bar ...

General SKU414S1014 LocationBarneveld CEcheck MakeHeraeus Instruments Hanau TypeB 6 Main Features MaterialStainless steel Volume73 Ltr. Max.temp.70 °C Specified Features - Drying oven Climate boxLaboratory Incubator Max. temperature70 degr. C Number of compartments:1 Capacity73 ltr. Internal width408mm Internal depth390mm Internal height459mm Electric heatingcheck Electric capacity0,32 kW Number of doors:1 MaterialStainless steel 1.4301 (304) Information No.99101511 Year of constructionunknown With switchcheck Floorspace0,7x0,6 M Total height0,7 M Weight70 KgDrying ovensHeraeus HanauDryers > Drying ovensBrand > Heraeus Hanau What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please v ...

STRAND PELLETIZER 250 mm., Fixed pitch, 4 kW motor, 4 poles, IE3 motor drive, Transmission belts, Speed variation via inverter, Electrical panel compliant with CE standards - 400 V, 50 Hz with, 2 x 16 Amp sockets, width 250 mm, Rotor with 12 micrometrically adjustable rotating blades, Counter-blade made in widia, Hardened pressure roller, diameter 60 mm, straignt knurling, Hardened drive roller, diameter 40 mm, straight knurling, Pneumatic piston for presser roller adjustment, Chrome plated parts in contact with the material, Stainless steel discharge, Limit switch with safety lock, Mounted on anti-vibration support with sound proof panels, installed power - used power in work: about 60-65% : 4,0 kw, availability: 70 working days ca, working width: 250 mm, conditions: new machine, type: strand pelletizer for extruders

Portable 7-axis coordinate measuring system ROMER Infinite 1.0 SC 5028SC. Measuring range diameter: 2800mm, point repeatability: approx. +/-0.045mm - 0.050mm, volumetric length measurement uncertainty: approx. +/-0.064mm - 0.075mm, wireless communication: Wi-Fi 802.11b/g, battery operation, software base: WinRDS driver compatible with measurement software solutions PolyWorks, PC-DMIS, PowerInspect, Metrolog. Including integrated balancer, transport case, probe set 6mm, 15mm, tip, mounting plate with 3 magnets, calibration bar with calibration certificate. Inspection by appointment possible.

Technical data for the shelf: Shelving system: Meta Type: Clip The scope of delivery includes: 01x Shelf, used Soil name: MS150-III Material colour: sendzimir galvanised Dimensions: 1,300 x 600 x 40 mm Weight: 5.11 kg|pcs. max. load per shelf 150 kg with evenly distributed load Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Technical data for the shelf: Shelving system: Meta Type: Clip The scope of delivery includes: 01x Shelf, used Soil name: MS150-III Material colour: sendzimir galvanised Dimensions: 1,000 x 600 x 40 mm Weight: 3.93 kg|pcs. max. load per shelf 150 kg with evenly distributed load Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Fabricante IBARMIA Modelo ZVH 58 / L3000 Año 2004 CNC Heidenhain iTNC-530 Mesa Superficie de la mesa 3.600 x 1.050 mm. Ranuras en T 7 x 18 H 18 Distancia entre ranuras en T 125 mm. Distancia entre nariz husillo y mesa 25-366 mm. Peso máximo admisible en mesa 4.200 kg Recorridos y avances Curso longitudinal (Eje X) 3.000 mm Curso transversal (Eje Y) 1.000 mm Curso vertical (Eje Z) 860 mm Rango cabezal basculante (Eje B) ± 105º Rango giro (Eje C) ± 360º Avance rápido (X, Y, Z) 30 m/min Avance máximo trabajo (X/Y/Z) 30 m/min Avance rápido eje B 170 rpm Mesa rotatoria integrada Ø mesa rotatoria 1.000 mm. Ø máximo de rotación 1.400 mm. Cabezal Revoluciones cabezal 9.000 mm/min Cono cabezal ISO-50 DIN 69871-AD Potencia motor principal 28,5 kW Par motor principal 240 Nm Cargador automático herramientas Fabricante AITEK Tipo cambio RANDOM Posicion ...

PRIMULTINI log band saw line SHF-1400-CEI-IEC, Manufacture year 2007, Consisting of:, 1. PRIMULTINI hydraulic log carriage, type CEI, - 3 pc. hydraulic headridges, - Distance between headridges 1400 – 1900 mm, - Opening headridges horizontal 1000 mm, - Opening vertical of clamps 900 mm, - 2 selectable closing pressures, - Each headridge with double hydraulic centering pad, - 3 pc. log turners, 2. PRIMULTINI hydraulic driven rope feeding, type IEC, Incl. rails and guiding rollers, 3. PRIMULTINI control unit with PRIM 602 touch screen controller, Incl. electric cabinets, 4. PRIMULTINI band saw machine, type SHF 1400, - Diameter flywheels 1400 mm, - Width of flywheels 190 mm, - Maximum sawblade 206 mm, - Saw blade protection, - Blade guide with hydraulic pressure, - Electric adjustment blade guide, - Electric adjustment blade tension upper wheel, - Chain bed transport, - Motor 75 kW, The  ...

Offered is a travelling column machining center: rotary table: 1500mm, travels X/Y/Z: 1600mm/800mm/800mm, tool holder: SK50, spindle drive: 60kW, speed range: 20 to 6000rpm, tool changer: 30 positions, machine weight approx. 19200kg, machine dimensions X/Y/Z approx. 6000mm/4000mm/3200mm. Incl.: internal coolant supply, chip conveyor, chip flushing system, approx. 60 pieces SK50 tool holders, 3-jaw chuck. Inspection possible by arrangement.

Manufacturer: VISCOM Model: S3088 III Year of Manufacture: 2011 Weight: 750kg Last annual maintenance by Viscom: June 23, 2025 With a loading/unloading machine: - Manufacturer: ASYS - Type: AES 03DK - Year of manufacture: 05/11 - Weight: 335kg Find more here - / Contact us at -

Offered is an ILLIG HSA 30 RD - high-performance continuous sealing machine for blister packaging: blister films: PVC, PET APET/PETG, PS, film thickness: 150µm-600µm, lid materials: heat-sealable cardboard, aluminum composite films, Tyvek, sealing area X/Y max. approx. 500mm/300mm, forming depth max. approx. 100mm, 8-18 cycles/minute. Inspection possible by arrangement. Available starting June 2026.

Monochromatic sorter, 1440 mm working width, LED lighting, digital cameras. Cereals up to approx. 20 t/h, sunflower up to 4 t/h, mustard up to 3 t/h. Service from Dresden.

All items are sold on condition `as is and where is`. Ex work from current location excluding de-installation, de-hook up, discharge, packaging, crating and delivery. We are not responsible for any damage incurred during shipment.

Product Overview: EDA Industries SM 24 FH 150 Description: The EDA Industries SM 24 FH 150 is a high-performance Burn-In Oven System designed for reliability and stress testing of semiconductor devices. This 2018 model is engineered to simulate extreme operating conditions, helping to identify "infant mortality" failures in integrated circuits and power modules before they reach the final consumer. Technical Specifications: - Manufacturer: EDA Industries - Model: SM 24 FH 150 (SM24 / SP40 Series) - Year of Manufacture: 2018 - Application: Semiconductor Burn-in / Reliability Testing / Life Cycle Testing - Max Operating Temperature: 150°C (Standard) - System Type: Thermal Chamber with Electronic Testing Interconnects Physical Dimensions: - Width: ~79.13 in (201 cm) - Depth: ~86.61 in (220 cm) - Height: ~78.74 in (200 cm) - Weight: ~1,800 lbs (816 kg)

All items are sold on condition `as is and where is`. Ex work from current location excluding de-installation, de-hook up, discharge, packaging, crating and delivery. We are not responsible for any damage incurred during shipment.

Offset rotary printing machine Type: Lithoman III Manufacturer: MAN Roland Year: 2006 Impressions: 60000 Machine in good condition, fully functional, under power Find more here - / Contact us at -

Industrial drying oven / heating oven: Maximum operating temperature: 160°C, power: 20.6kW, double-door model, recirculating air / fresh air system, digital PID temperature controller, digital timer / process control, digital recording device / chart recorder (TE Direct), internal dimensions (W x H x D): approx. 1000mm x 1500mm x 800mm (approx. 1200l volume), external dimensions (W x H x D): approx. 1600mm x 2100mm x 1200mm, total weight: 580kg. Inspection possible by arrangement.

This Impulse IP-175 Yamuna piston pump is designed for vertical and horizontal drainage. These positive displacement pumps are self-priming and ideal for pumping unlimited quantities of a mixture of water and air. In addition, this pump can run dry without causing damage or wear to parts., , Can be supplied with any desired coupling/connection., , , , Multiple units in stock, , Throughput capacity: 95 m3/h, Motor brand: Hatz 1D81z, Max. delivery head: 22 MWK, Weight: 1950 kg, , Throughput capacity: 90 m3/h, Max dirt passage: 0 mm, Motor brand: HATZ 1D81z, Max. head: 22 MWK, Max dirt passage: 1500 rpm, Weight: 1950 kg, , = More information =, , Year of manufacture: 2026, Applicable material: Water, Empty weight: 1.950 kg, Connector size: 4 inch, Quick coupler system: Yes, Technical condition: very good, Visual appearance: very good, Please contact Gert-Jan Kruitbosch (+31648061001, sales@ ...

Manufacturer: ABB Model: IRB 1200-7/0.9 Omicore Warranty until 23.09.2026 Reach 901 mm Load capacity 7 kg Additional arm load 0.5 kg Axles 6 Robot controller: Omicore C30 Position repeatability: 0.013 mm Cycle time 7 kg version 1 kg pick & place cycle 25 x 300 x 25 mm: 0.4 s Maximum TCP speed: 7.3 m/s Max. TCP acceleration: 35 m/s² Acceleration time: 0 –1 m/s 0.06 s Robot footprint: 210 x 210 mm Weight: 54 kg MANIPULATOR - Manipulator variant: IRB 1200-7/0.9 - Manipulator color: ABB Graphite White std - Manipulator protection: Base 40 - Robot cabling: From the base side STEERING - Control variant: OmniCore C30 - Control Housing: Base - inch rack mounting kit: Yes - Operating temperature: max. 45 °C - Mains voltage: 220–230 V AC +10%/-15% - Connected Services: Wired LAN - Ethernet Switch: 5-port Ethernet switch - Additional logic 24 V power supply: 24 V, 8 A - Fle ...

This 12s Index MS42C multi-spindle turning machine was manufactured in 2002. It features a maximum bar diameter of 42 mm and a spindle speed of approximately 5,000 rpm, making it suitable for high-quality turning capabilities. Consider the opportunity to buy this Index MS42C multi-spindle turning machine. Contact us for further details.

Manufacturer:Keyence Model: IM6025 Year of Manufacture: 2016 Find more here - / Contact us at -

This 5-axis Index G 200 RATIO LINE was manufactured in 2003. It features a Y-axis travel of 120 mm, a main spindle diameter of D65, and a counter spindle diameter of D60. The machine is equipped with a turret that has 12 stations and driven tools on turret 1 and 2. If you are looking to get high-quality turning and milling capabilities, consider the Index G 200 RATIO LINE turn-mill centre we have for sale. Contact us for further details.

This Inanlar CNC HAP 70 25/21 was manufactured in 2018. It features a bending length of 2,550 mm and a bending force of 70 tons. The machine includes a finger protection system and supports for safety and efficiency. With a main motor power of 5.5 kW and a stroke of 185 mm, its ideal for precise bending operations. Contact us for more information about this machine.