132,779 used machines on RESALE, but how to find them? Machine Search
Used and untested; 16007880 Auction-ID: A7-46481-168
BATTENFELD TM 1300 injection moulding machine was built in 2004 in Austria by BATTENFELD GmbH. The machine is used for the economical mass production of plastic parts of various colours, shapes and sizes. The workpieces are produced using the injection moulding method, in which plasticised plastic is fed into a mould and then closed with high press force. In order to achieve parts with high repeatability and durability, the machine uses many reliable components with excellent parameters, including a high-precision mould clamping system operating at a force of up to 130 tonnes. All this is complemented by the intuitive UNILOG B4 CNC control with its many useful functions, which allows programming of the operating modes in just a few steps. The TM 1300 injection moulding machine weighs 7000 kg. Technical specifications of the BATTENFELD TM 1300 injection moulding machine - CNC controll ...
Used and untested 16007358 Auction-ID: A7-46481-95
Transnorm inclined roller conveyor 2355-980-640 - Showroom machine RA2316 Make: Transnorm Roller width (RB): 640 mm Nominal/outer width (NB): 980 mm Length: 2355 mm Diameter rollers: 50 mm Distance between rollers: 55 mm Roller conveyor motor: SEW drive motor frame height: 210 410 mm side guide with 200mm belt conveyor included Conveyor speed: freely adjustable with frequency converter Incl. supports, curent height 800mm Optionally available: Supports, if deviating from the current ones MFE52 Ethernet frequency inverter control unit Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstraße 11 B & C, 97076 Würzburg, Germany Features: Construction year: 2017 condition: Ausstellungsstück nominal voltage: 380-500V angle: 13,4° Conveying length in mm: 2355 Nominal / outside width in mm: 980 Roll width in mm: 640 Roll division in mm: 55 Driven: YES Engine type: 2 ...
Transnorm Rising falling Incline belt conveyor with leading belt GF 4600+3300-600-600 RA2202 Technical data: Conveyor length (NL): 7900 mm ( 4600 mm riser segment + 3300 mm forerun) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 7900 ( 4600 + 3300 ) Nominal / outside wid ...
630x2115 mm; white pre-treated Auction-ID: A1-46266-345
Kannegiesser inclined belt conveyor Hopper Filling Funnel GF 2750-470-380 RA1311 This belt conveyor is from the year 2015 and is in good (used) condition. Additionally this conveyor is equipped with a height adjustment and can therefore also be used as an inclined conveyor. Due to the 2-layer PVC belt, the transported goods can be transported at a height of 260 mm up to a height of 750 mm. Due to a constant conveying speed of 0.3 m/s you benefit from a continuous material flow in your intralogistics. Technical data: Conveying length (NL): 2750 mm Framework width (NB): approx. 470 mm belt width (GuB): 380 mm Height / Belt run (BH): from 260 mm to 750 mm rising +/- 50 mm height adjustment Number of support feet: 2 pieces, movable on fixed rollers Load (kg/rm): 30 kg Conveying speed (v m/s): 0.3 m/s constant Drive: TM 113i drum motor Electrical data: 400 V / 50 Hz / 0.3 kW Deflection drum ...
Transnorm Rising falling Incline belt conveyor with leading belt GF 25000+4000-1000-900 RA2288 Technical data: Conveyor length (NL): 29000 mm ( 25000 mm riser segment + 4000 mm forerun) frame width (NB): 1000 mm, 1100 mm with motor belt width (GuB): 900 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,2 Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW2,2 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 29000 ( 25000 + 4000 ) Nominal / outside widt ...
Key data: 20000 kN, 135 mm
Dosing 1: Plasticizing 1: Screw diameter mm 135 Screw diameter mm 120 | 135 | 150 Dosing Stroke Screw stroke mm 610 Maximum injection capacity cm3 6899 | 8731 | 10780 Screw speed min-1 125 Worm torque Screw torque Nm 14000 Maximum screw speed reduced torque min-1 135 Reduced torque maximum screw speed Nm 12963 Reduced screw speed maximum screw torque min-1 112 Maximum screw torque reduced screw speed Nm 15630 Plasticizing performance (3-zone) 1.2 Recovery rate (3-zone screw) 1.2 g/s 165 | 222.9 | 231,3 Plasticizing performance (barrier) 3 Recovery rate (barrier screw) 3 g/s 208.3 | 279.2 | 264,6 1) Values for polystyrene up to injection unit 2550 according to ETR 10100 1) Data for GPPS up to injection unit 2550 acc. ETR 10100 2) Values for HDPE from injection unit 3550 according to ETR 10100 2) Data for HDPE from injection unit 3550 onward acc. ETR 10100 3) Values for HDP ...
18048571 Note: The item is defective! Auction-ID: A7-46481-1062
I offer here 2 pieces of fine indicator throat gauges from Mahr so-called Marameter F 1 x 25-60 mm 1 x 50 - 100 mm in very good condition immediately ready for use and tested for function the two devices are delivered as shown in the pictures
Automatic ingredient dosing and weighing with recipe computer Suitable for dusty, crushed, crystalline, granular products such as salt, sugar, baking aids, spices Dimensions: Length: 3760 mm Width: 750 mm Height: 1880 mm 14 containers with a volume of up to 60 litres Stainless steel Discharge type:Vibro-discharge apparatus 0.085 kW Discharge via: Weighing conveyor belt Dosing accuracy: 10 to 15 grams Dosage quantity/component: up to 10 litres Total dosage: up to 20 litres Discharge capacity: 2 - 10 kg/min (depending on the material)
Flake ice maker from AHT with pantry - Coolant R 404A 0.290kg - 220-240V - 50 Hz - 650 watts
Beckhoff C6220 Industrial Control Cabinet PC for Heinen( Diana Control) Control Jagenberg Diana Pro. Used, tested.
Test bench for power up to 2.2 KW Speed control Speed Switching Handheld remote control with cable for speed and rotation direction switching Data for converters see nameplate Connection cable CEE 32A Output CEE 16A Space requirement W - 600 x D - 650 x H - 1,750 mm rollable Weight approx. 85 kg
Technical data: • Brand: Fliegl • Type: 18000L pump tanker with trailing shoe distributor • Year of manufacture: 2011 • Buffer capacity: 18,000 litres • Tyre size: 750/60 – 30.5 • Trailing shoe distributor (Bomech): 7.2 m • Slurry cultivator (Fliegl Rasant): 7.2 m • Net weight: 1,150 kg (trailing shoe distributor) Overall dimensions (approx): • Length: approx. 8,500 mm • Width: approx. 2,800 mm (transport width) • Height: approx. 3,500 mm Pump: Vogelsang LS 360 Rotary Lobe Pump • Serial Number: 3479 • Year of construction: 04/2009 Control: • Electric/hydraulic via operator terminal in the tractor cab • Control of pump, suction nozzle, auger, flaps and sliders • Vibration counter: 2,309.39 h • Dual rear cameras Distributor: • Bomech trailing shoe distributor with disc injector technology • 36 hose out ...
Internal micrometer, internal measuring instrument, internal dial gauge, internal micrometer screws, micrometer screw, internal diameter, internal micrometer, cylinder gauge -Measuring range: 160-295 mm -Dimensions: 200/485/H135 mm -Weight 4 kg
1x IBM 5153 1x IBM 5150 1x IBM 1501102 Auction-ID: A1-46686-97
New Unused Auction-ID: A7-46327-57
5 cores Auction-ID: A1-46666-438
Unaudited Visually good condition Auction-ID: A7-46327-10
Untested, Professional Vacuum Cleaner High Performance Auction-ID: A7-46327-25
Various diameters and lengths Auction-ID: A1-46698-159
KUB Trigon ABS100/ various diameters and lengths Auction-ID: A1-46698-66
Well pump, centrifugal pump, water pump RED JACKET UMP i50S3-S diameter. Ø 120 mm motor: 1.2 kW 220 V
maximum number of results exceeded
please refine your search
120 € 
