134,082 used machines on RESALE, but how to find them? Machine Search
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 27 mm -Dimensions: see photo technical drawing -Overall dimensions: 95/80/H67 mm -Total weight: 2.5 kg
I offer for sale an unused and completely original packaged industrial shelf SSI Schaefer LTR600. The shelf was originally ordered for a project, but never assembled. All components are in new condition and are completely present. Technical data • Model: SSI Schaefer LTR600, single-sided longitudinal vertical shelf • Overall length: 39.3 m • Height: 7.6–8.1 m • Depth: 800 mm • 14 fields, each with a clear field width of 2,700 mm • 7 levels per field • Per level: 4 depth pads type UN Scope of Delivery • Complete shelf line LTR600 • All stud frames (7.6–8.1 m, orig.) • All trusses (2.7 m) • All depth pads type UN • Small parts & fasteners • Original SSI Schaefer packaging Condition • New • Never set up • Original packaging • Complete Logistics / Pick-up • Location: Fellheim (Bavaria) • Longest components: 7.6 ...
Immediately available completely overhauled injection pump
T16 - used approx. 50 m³ / 50,000 L steel tank, coated from the inside, insulated, covered. Technical details: Content: approx. 50 m³ / 50,000 litres Material: Steel tank with inner coating Manufacturer: Ermert GmbH Certification mark: PA-VI 212.037 Dimensions: approx. Ø 2.90 m outside / 2.50 m inside × L 11.00 m × H total 3.00 m with base Other: Used steel tank with inner coating, insulated, covered with aluminum sheets. Former heating oil tank, professionally cleaned and in good condition. Horizontal, above-ground storage tank on 2 concrete bases, dome on the top of the tank, several inlets and outlets. Only the pure tank is sold, without add-on parts such as scaffolding, pipes, fittings and accessories. The container can be used as a storage tank for many different media, e.g. as an extinguishing water tank. Price on request. Transport can be organised at a reas ...
This injection moulding machine from Dr. Boy is in good condition. The machine is from 2007 and has few working hours. Brand: Dr.Boy GmbH & Co.KG Model: 55M Year of construction: 2007 Clamping force: 55 T Screw diameter: 32mm Shot volume: 96.5 cm³ Working hours: 24,210
Beer bottling line, Framax 9-8-1 filler, pressure filler, double pre-evacuation, module block RFCI 09-08-1 DPS-C, year of construction: 2014, set up for 330ml bottles, with labeling machine, self-adhesive labels Beer Bottling line, Made by: Framax 9-8-1 Filler, Counter pressure filler, isobaric, double pre-evacuation, Modulblock RFCI 09-08-1 DPS-C, Year: 2014, adjusted to 330ml, 33cl, 0,33l glass bottles, Labeller Labelling machine, self adhesive labels
An inspection system for bottle label inspection is offered, Throughput capacity 15,000 bph With 3 cameras and control
System Overview This is a purpose-built, containerised ISO tank and road tanker washing system, custom-designed and manufactured to a high specification. The complete system is housed in two standard 40ft ISO containers, making it fully mobile, easy to deploy, and ready for international shipment. The system comprises two independent but complementary units: ► Unit 1 — Tank Washing Unit: A fully equipped hot and cold pressure washing system for ISO tanks and road tankers ► Unit 2 — Wastewater Treatment Plant (WWTP): A physicochemical water treatment system for effluent compliance and water recycling ★ Capacity: 5–8 ISO tanks per day + 3–4 road tankers per day ★ Self-contained: all pumps, burners, controls housed within the containers ★ Water recycling: treated water returned to wash cycle — reduces fresh water consumption ★ Compliant: designed to meet Ha ...
Year of Make: 1989 Overhaul: 2020 Capacity: up to 12,000 bph 0.5l Counter-pressure filler for beer with long pipe Product: Beer, soft drinks and mineral water Bottle: Glass, 0.33; 0,5; 0,75; 1.0 L Capper: Crown cork
Incl. control and control panel Axles: 6 Hand load capacity 16 kg
Bosch Injection Pump for MAN D2842 LE211 with GAC controller, cf. MAN part number: 51.11103-7451 59.11103-7451 N (l/min): 750 RW (mm): 12.7 or 13.6 EPP-FM (mm³/H): 332 or 367
Inv. Num. : 7714 Type: PJS Producer: AMT Created: 2021 Parameters: The device is in good condition.
Inv. Num. : 7715 Type:- Producer: AMT Created: 2014 Parameters: Capacity: 2000 kg/hod
9 Removable 21 Shelf Racks Auction-ID: A1-45803-5
Robotic TIG Welding Cell Equipment: Rotatable Welding Table – with two interchangeable frames KUKA KR6 R1820 industrial robot arm Year of manufacture: 2018 Serial number: 425602 Weight: 168 kg Max. Load capacity: 6 kg Reach: 1820mm KUKA KR C4 smallsize-2 controller / controller Year of manufacture: 2018 Serial number: 380929 Weight: 123 kg TIG Dinse DIX TIG 350 AC/DC Welding Machine Serial number: 19840519 TEKA Caremaster BIA welding fume extraction equipment (2 pcs.) Capacity: 2200 m³/h Connection Parameters: 400V / 50Hz / 2.5A Power: 1.1KW Weight: 125kg/pc Year of manufacture: 2008 6-section steel cabinet Equipped with additional accessories
Mosca accumulation conveyor STF (timed belt conveyor) Condition: overhauled, serviced, fully functional, ready for use (new bearing, 4 x new transport belts/belts, etc.) Total length 1 meter (2 x 500 mm) Equipped with 2 waiting positions Detection of products by means of 2 integrated photocells Equipped with 2 drives Speed infinitely adjustable by means of frequency converter in the electrical cabinet Equipped with contact plug for pre- and redesigned machine (potential-free, 24V) Documentation: Operating instructions, spare parts catalogue and electrical diagram available If the following machine is not ready, the products are stopped one after the other at the two respective waiting positions. As soon as the release signal from the downstream machine is available, the products are transported on again.
Key data: 700 kN, 35 mm
used injection moulding machines ENGEL VICTORY 200-70 Tech Stock No.: 503473 Manufacturer: ENGEL Type: VICTORY 200-70 Tech Control: CC100 Year of Make: 2004 Hours: 77192 h Technical data closing page Clamping force: 700 kN Panel size h x v: 670 x 420 mm Min. installation height: 150 mm Plate spacing max.: 600 mm Opening travel: 450 mm Ejector stroke: 100 mm Ejector force: 40 kN Centering of movable plate D: 125 mm Centering of fixed plate D: 125 mm Tool weight: 675 kg Technical Data Spray Side Screw diameter: 35 mm Displacement: 154 cc Spray pressure: 1600 bar Screw length: 20 l/d Screw speed: 400 min Plasticizing current: 21 g/s PS Outdoor injection flow: 151 g/s hp Number of heating zones: 4 Nozzle travel: 250 mm Dimensions & Weight Machine dimensions LxWxH: 4.4m x 1.5m x 2m Total Weight: 5200KG Equipment Screen text German Screentext English ...
B&A REF: 9053 TON: 80 SHOT WEIGHT: 183 SCREW DIAMETER: 40MM STROKE VOLUME: 201CM3 INJECTION PRESSURE: 1860AR PLATEN SIZES: 670 X 670MM DBTB: 420 X 420MM MIN MOULD HEIGHT: 250MM MOULD OPENING STROKE: 500MM MAX DAYLIGHT: 750MM EJECTOR STROKE: 150MM CONTROLS: MC5 CORE PULLING: 1 AIR VALVES: 1 MOTOR: 15 HEATING CAPACITY: 8.12KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE: HYDRAULIC
PLC control, digital output, digital input, digital input module -Manufacturer: B&R, Digital input module with bus module -Type: X20 DI 837 -Bus module: X20 BM 11 -Number: 2 modules available -Price: per piece -Dimensions: 100/20/H75 mm -Weight: 0.1 kg/pc.
Power: 308 hp (226 kW); Case NEF 6.7 diesel; 6 cyl.; 24 valves; 6,700 cm³; turbo intercooler; Euro 5; DPF Operating parameters: Rotor hours 1,500 h; hydrostatic gearbox; travel speed 30 km/h; fuel cons. approx. 30 l/h; fuel tank 950 L; baler width 3.94 m; discharge height 7.46 m; grain tank 10,570 m³; transport dim. 8,700 x 3,940 x 4,000 mm; wt. 15,500 kg Workpiece capacity: Large-scale grain harvesting; high-capacity silo 10,570 m³; linear rotor system Supported edges: Cereals & grain crops (typ.) Edge types: Harvesting; threshing; grain separation & discharge Included equipment: On-board computer; cruise + adaptive cruise ctrl.; drive mode selection; electronic instrument panel; tachometer; electric/heated mirrors; fuel saving system; air seats; heated cabin; auto climate control; hydraulic power steering; steering wheel adj. (height/depth); manual seat adj. + hea ...
Bosch Injection Pump for MWM 232 for sale Bosch Number: 62801845
SKF TIH 070m/230V Induction Heater Auction-ID: A1-45977-289
100 pieces of inserts NEW consisting of: 30 pieces R390-11T3 for steel 30 pieces R390-11T3 for stainless steel 20 pieces R390-11T3 for aluminum 20 pieces R390-11T3 CERMET The composition of the set can be changed on request. Please let us know the desired radius when ordering.
MACC Iron Bender "Piegaferri" Steel construction with hardened jaws 100 x 7 mm Vise with eccentric clamping Footprint 330 x 330 x 300 mm Weight approx. 35 kg
D+L Welding Inverter AC DC TIG 200 P AC/DC, TIG-TIG 200 A 230 V Weight approx. 25 kg
maximum number of results exceeded
please refine your search
3 € 
