x ray used for sale

A Takamatsu CNC twin-spindle turning and milling center is available. 1) Turning diameter: 190mm, turning length: 150mm, max. one-sided machining length: 440mm, max. bar diameter main spindle/counter spindle: 51mm/42mm, spindle nose 1/2: A2-6/A2-5, spindle bearing 1/2: 100mm/85mm, main spindle bore 1/2: 52mm/43mm, spindle speed: 5000rpm, tool stations: 2×12, travel X1/X2: 162.5mm/170mm, travel Z1/Z2: 500mm/500mm, travel Y: +/-35mm, travel A: 550mm, machine dimensions X/Y/Z: approx. 3000mm/2250mm/2100mm, weight: approx. 7400kg, control: Fanuc 32i-B. 2) TOP Automazioni FU350SX bar feeder, max. bar capacity: 52mm, max. bar length: 3200mm, max. remnant length: 300mm, max. feed rate: 30m/min, max. bundle weight: 2000kg, machine dimensions X/Y/Z: approx. 4300mm/1400mm/1200mm, weight: approx. 1200kg. 3) LTA E 120-X-2-H filtration system, year of manufacture: 2022, filter stages: 2, extraction  ...

Inductive sensor, electronic sensor, safety switch, inductive proximity switch, proximity sensor, NAMUR sensor -Manufacturer: Telemecanique, Inductive proximity switch, unused, original packaging -Type: XS518B1PAM12 -Number: 3 sensors available -Price: per piece -Box dimensions: 95/40/H65 mm -Weight: 0.1 kg/pc.

The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames, - Noise Rating: 65 dB at 7m and 100% Load, - Stage V / StageV / Stage 5 / Stage5 / EU Stage V / EU StageV / EU V / EU Five / Stage Five / EU Stage 5 / Tier IV Final / Tier 4 Final / Tier4 Final; Gross weight [kg]: 815; Engine: Cat C2.2; Accessories: Tanker, Battery, Control Panel, Stahldach, - Sockets: 2x16A, 2x 32A, - Option for 24H tank as in 2nd picture.; Water Tank Volume [l]: 56

The Alfa Laval CMPX 213 XGP-74/4171-40 self-cleaning sanitary disc separator is used as a recovery and rework separator. Its function is to separate residual fat from the heavy phase, produce clarified wastewater, and recover approximately 10–40% of the fat, which is returned into the reprocessing of the line., Machine comes with the bowl, motor (18,5 kW), base plate with feet, water valves, all inlet/outlet pipes with pumps, service tools for maintenance and a big lot of spare parts., Additional features:, � ��Excluding:, - Motor cover., - Control panel., This separator is part of a butteroil production and purification process. The process flow is illustrated in the attached P&IDs and flowcharts., Butterfat is first melted and conditioned in the T100 proces ...

The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames, - Noise Rating: 65 dB at 7m and 100% Load, - Stage V / StageV / Stage 5 / Stage5 / EU Stage V / EU StageV / EU V / EU Five / Stage Five / EU Stage 5 / Tier IV Final / Tier 4 Final / Tier4 Final; Gross weight [kg]: 4784; Engine: Cat C9.3B; Accessories: Tanker, Battery, Control Panel, Stahldach, - Built-in switch 50/60 Hz, - Sockets: 2x16A, 2x 32A, 1x 63A, 1x125A; Water Tank Volume [l]: 667

Tube cutting machine manufactured in 2020. This Bodor X2260 features a powerful 3 kW laser and is equipped with a CNC control panel interface, automatic chuck system, and a dedicated extraction system. It also includes a tube support roller and conveyor loading bed for enhanced efficiency. If you are looking to get high-quality tube cutting capabilities, consider the Bodor X2260 machine we have for sale. Contact us for further details.

CNC lathe, year 2006, CNC 0i - TC. Used machine in good condition. More info & price on IndustrialBuyer.

The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames, - Noise Rating: 65 dB at 7m and 100% Load, - Stage V / StageV / Stage 5 / Stage5 / EU Stage V / EU StageV / EU V / EU Five / Stage Five / EU Stage 5 / Tier IV Final / Tier 4 Final / Tier4 Final; Gross weight [kg]: 4487; Engine: Caterpillar C7.1; Accessories: Tanker, Battery, Control Panel, - Built-in switch 50/60 Hz, - Sockets: 2x16A, 2x 32A, 1x 63A, 1x 125A; Water Tank Volume [l]: 822

The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames, - Noise Rating: 65 dB at 7m and 100% Load, - Stage V / StageV / Stage 5 / Stage5 / EU Stage V / EU StageV / EU V / EU Five / Stage Five / EU Stage 5 / Tier IV Final / Tier 4 Final / Tier4 Final; Gross weight [kg]: 2527; Engine: Cat 4.4; Accessories: Tanker, Battery, Control Panel, Stahldach, - Built-in switch 50/60 Hz, - Sockets: 2x16A, 2x 32A, 1x 63A; Water Tank Volume [l]: 518

The machine is in good technical condition; testing is possible by prior arrangement. Fanuc Oi-TD system.

The machine is in good technical condition; testing is possible by prior arrangement. Fanuc 0i-TD system.

x-travel: 400 mm y-travel: 200 mm z-travel: 400 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m SK40, xyz 400mm/200mm/400mm, table size 750mm x 300mm spindle speed 40-1600rpm, infeed 8-320mm/min weight ca. 2000kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Godwin HL80M high-pressure pump, , This dry self-priming high-pressure diesel engine pump is ready to tackle all the heavy work without complaining. With its robust 75 kW Deutz diesel engine (at 2200 rpm), it delivers impressive performance: a maximum capacity of 95 m³/hour and a delivery head of up to 85 meters. Whether its pressure testing pipes, irrigation, or a rinsing job after a fun weekend in the mud, this HL80M can handle it all., , Key specs:, , Type: HL80M, Drive: Deutz diesel engine, Fuel tank: 250 liters (you can keep pumping for a while before it gets thirsty), Consumption: ± 20 liters/hour at full load, Pressure connection: 4 flange, Suction connection: 4 V-piece quick coupling, Weight: 1,800 kg (solid, because quality weighs something), Dimensions: 2150 x 1130 x 2060 mm, Pump housing: cast iron – extremely strong, Impeller: cast steel – for when things get serious, M ...

plate thickness: 50 mm angle adjustable from - to: 25-55 Grad speed: 3 m/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Xiangfan/SPARK CNC large-format engine lathe is available. Swing diameter over bed/cross slide: 2200mm/1800mm, bed width: 1100mm, distance between centers: 8000mm, max. turning length: 7500mm, max. workpiece weight: 20t, max. workpiece weight between centers: 19t, main spindle bore: 140mm, bar capacity: 100mm, spindle speed: 200rpm, X/Z-axis travel: 920mm/7500mm, feed rate: 2m/min, rapid traverse: 3m/min, tool stations: 4, chuck jaw count: 4, chuck diameter: 2200mm, chip conveyor length: 8000mm, control: Siemens SINUMERIK 802D. Including coolant system, mandrel, chip conveyor and measuring system. Documentation available. An on-site inspection is possible.

A Kongsberg flatbed cutting and creasing plotter is available. Table dimensions X/Y: 1329mm/1834mm, working area X/Y: 1324mm/1624mm, max. speed: 50m/min, positioning accuracy: +/-0.2mm, repeatability: +/-0.05mm, material clearance: 50mm, max. tool force: 220kN, tool 1/2/3: drag knife/oscillating knife/creasing wheel, registration system: i-cut Vision Pro. Machine dimensions X/Y: approx. 2250mm/2000mm, weight: approx. 420kg, operating hours: approx. 250h. Documentation available. An on-site inspection is possible.

DOMINO A320i Inkjet Printer., Little used, in very good condition., Nozzle size:: 60 or 75 microns , Micropoint only:: 40 microns , Elec:: 240V 50 Hz , Dimensions (mm): 630x660 H 1680

Key data: 300 t

Manufacturer: Hylatechnik Paul Chrubasik GmbH Type: HSSP 300-3-XA4 Machine Type: Hydraulic Press Year of Make: 2000 Condition: used Press force: 3,000 kN Press force: 300 t Stroke: 300 mm Maximum installation height: 800 mm Table surface: 2,000 × 1,550 mm Plunger area: 2,000 × 1,540 mm Passage at the front: 2,000 mm Side passage: 1,050 mm Table height: 800 mm Fast forward: 340 mm/s Working speed 1: 32.5 mm/s Working speed 2: 19.5 mm/s Retraction: 340 mm/s Maximum working pressure: 280 bar Drive power: 75 kW Power supply: 400 V Frequency: 50 Hz Machine weight: approx. 38,500 kg Hydraulic oil tank: approx. 2,000 l Throw pillow: no Equipment: Complete DREHER conveyor system DREHER Belt Unwinder DREHER Belt Feed DREHER belt conveyor system Hydraulic cut impact damping with parallel hold Hydraulic Rolling Blocks Tool change consoles Siemens SIMATIC control ...

Rump wire belt blasting machine type Xedura 1500, good condition, serviced 1x per year

bore capacity in steel (diameter):40 mm arm length:1250 mm workpiece height max.:1390 mm spindle taper: MT:5 table surface area:750 x 1380 mm surface area:1450 x 920 mm total power requirement:5 kW weight of the machine ca.:3000 kg dimensions of the machine ca.:2060× 930 × 2760 mm

bore capacity in steel (diameter):40 mm arm length:1250 mm workpiece height max.:1390 mm spindle taper: MT:5 table surface area:750 x 1380 mm surface area:1450 x 920 mm total power requirement:5 kW weight of the machine ca.:3000 kg dimensions of the machine ca.:2060× 930 × 2760 mm

; Transport weight [kg]: 1140

; Transport weight [kg]: 1070

; Transport weight [kg]: 1070

; Transport weight [kg]: 1200

length: 800 mm width: 600 mm height: 1200 mm weight of the machine ca.: 0,4 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Suction: 660 l/min. Effective suction: 520 l/min On / switch-off: 8/10 bar container volume: 270 l voltage: 400 V / 50Hz power capacity: 4 kW turning speeds: 1025 U/min Sound power level: 69 dB dimensions: 960 x 740 x 1905 mm weight: 245 kg - Soundproof stationary piston compressor for work up to 10 bar - Smooth V-belt-driven 2-cylinder unit with two-stage compression - equipped as standard with all fittings and with rubber swinging elements - High performance refrigerated dryer with Super-Dry Technology and ECO shutdown - easily accessible condensate drain under the container The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate width: 2000 mm plate depth: 3000 mm plate height: 350 mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TRAK DPM 750 ist eine CNC-Fräsmaschine, konzipiert für Präzision, hohe Genauigkeit und Zuverlässigkeit. Arbeitsvermögen: Tisch 1270×320 mm, Verfahrwege X 750 mm, Y 400 mm, Z 610 mm, Traglast 600 kg, Abstand Spindel–Tisch 610 mm, Pinolenhub 120 mm. Technische Daten: Spindelaufnahme 40 ISO, 2 Stufen 5–3600 t/min, Spindelmotor 5,5 kW, Vorschübe 5–3800 mm/min, Pinolenvorschub 0,04/0,08/0,15 mm/t, Anschluss 3×415 V 50 Hz, Gewicht ~2100 kg, Abmessungen 1800×1650×2400 mm. Ausstattung: Digitalanzeige 3 Achsen. Erreicht enge Toleranzen; Einsatz in Automotive, Luftfahrt, Medizintechnik, Maschinenbau und Uhrmacherei. Technische Daten ohne Gewähr

TRAK TRM ist eine CNC Bohr-Fräsmaschine von hoher Präzision, Genauigkeit und Zuverlässigkeit. 3 Achsen, Werkzeugaufnahme SK40, Drehzahlen 70–4200 t/min. Tisch 1270×255 mm, 3 T-Nuten 16 mm, Abstand 64 mm, max. Belastung 600 kg. Verfahrwege X 800 mm, Y 450 mm, Z (Pinolenhub) 600 mm. Anschluss 50 Hz 3x 220 V. Ausgelegt für enge Toleranzen; geeignet für Automotive, Luft-/Raumfahrt, Medizintechnik und Maschinenbau. Technische Daten ohne Gewähr

TRAK / XYZ SLX 355 ist eine CNC Drehmaschine mit hoher Präzision, entwickelt für hohe Genauigkeit und Zuverlässigkeit. Mit 2 Achsen, Spitzenhöhe 360 mm, Spitzenweite 1000 mm und Spitzenhöhe über Schlitten 225 mm; Spindelbohrung 52 mm; Längsweg Z 1000 mm, Querweg X 190 mm. Eilgang Z 4 m/min, Eilgang X 3 m/min; Drehzahlen 50–1410 und 100–4000 min-¹. Spindelnase D1-6 Camlock und Morsekonus MK4. Ermöglicht enge Toleranzen; geeignet für Automotive, Luftfahrt, Medizin, Uhrenindustrie und Maschinenbau. Technische Daten ohne Gewähr

To push the arm set open at RASM Kindly Contact Sai Bavani [F10, Purchaser] 011-79573840

Assembly tables with felt pad used, Stable design, feet adjustable, 2,7x1,97 m 2 pcs. Pricing per piece plus VAT ex location

3x9 support arms, external dimensions approx. 2000 x 1600 mm LxW 1pc k. from stock plus VAT

Assembly tables with felt pad used, Stable design, feet adjustable, with center support, 2,7x1,97 m 2 pcs. Pricing per piece plus VAT ex location

Manufacturer: HANWHA Model: XP16S Year: 2012 Condition: Used Stock number: 9459 Control system: FANUC Oi-TD Maximum turning length: 140 mm Max. rod diameter: 16 mm Maximum rod length: 3700 mm Equipment: Bar Feeder AUTOBAR HP326-3.7

Manufacturer: HANWHA Model: XP32S Year: 2014 Condition: Used Stock number: 9460 Control system: FANUC 0i-TD Maximum turning length: 205 mm Max. rod diameter: 32 mm Maximum bar length: 3000 mm Equipment: Bar Feeder AUTOBAR 551-CONQUEROR

MIKRON XSM 400 is a CNC Hochgeschwindigkeits Fräsmaschine, ausgelegt für hochpräzise Bearbeitung mit hoher Genauigkeit und Zuverlässigkeit. Verfahrwege X 400 mm, Y 450 mm, Z 350 mm; max. Werkstückgewicht auf dem Tisch 100 kg; Paletten EROWA 320x320 mm, Anzahl Paletten 7; Werkzeugmagazin 68 Plätze. Spindelaufnahme HSK E 40 bis 42000 t/min; Frässpindelmotor 14 kW; Anschluss 50 Hz 3x 400 V; Maschinengewicht ca. 6500 kg; Abmessungen ca. 4000x4000 mm. Zubehör: Späneförderer; Kühlmitteleinrichtung; Kühlnebelsprüheinrichtung; Papierfilteranlage; Beleuchtung; Kühlmittel-/Nebelabsaugung; Palettenwechseleinrichtung; Zustandsleuchte. Geeignet für enge Toleranzen in Branchen wie Automobil, Uhrmacherei, Werkzeugbau, Luft- und Raumfahrt und Medizintechnik. Technische Daten ohne Gewähr

Technical data: Manufacturer: Fischer Type: XMDVM-T7.1-W Year of construction: approx. 2004 Measuring table travels: X 175 mm, Y 175 mm Software: WINFTM Version: 6.31 L-PDM 2014 Condition Condition: Used Functional: Tested and fully functional The granite slab shown in the picture is not an accessory and is not for sale.

Manufacturer: Epiroc Year of Manufacture Two units, one from 2019 and one from 2021 Model: Boomer XE3C Type of Machine: Drill Rig Carrier: - Engine: Deutz TCD 6.1, Tier 5 Final, 180 kW at 2300 r/min, catalyst and particulate filter - Fuel Tank Capacity: 150 liters - Electricity System: 24 V - Batteries: 2 x 125 Ah - Hydrodynamic Transmission: Dana 32000 - Front Axle: Dana 37R 116 - Rear Axle: Dana 213 by oscillation plus or minus 7 degrees - Tires: 14:00 x R24 - Hydraulic Jacks Front: 2 pcs, extendable sideways - Hydraulic Jacks Rear: 2 pcs - Service Braking: Two separate circuits - Brakes: Disc brakes, hydraulically actuated by two separate brake circuits - Parking and Emergency Brake Type: SAHR (Spring Applied Hydraulic Released) - Fire System: FORREX, hand held fire extinguisher - Tramming Lights: 8x40W LED, 2x70W - Work Lights: 2x160W plus 6x60W, 2 pcs joystick co ...

DOMINO A320i Inkjet Printer., Nozzle size:: 60 or 75 microns , Micropoint only:: 40 microns , Elec:: 240V 50 Hz, Dimensions (mm): 630x660 H 1680

CNC lathe with driven tools, year 2005, CNC 0i TC. Used machine in good condition. More info & price on IndustrialBuyer.

CNC lathe with driven tools, year 2003, CNC 18 TB. Used machine in good condition. More info & price on IndustrialBuyer.

Information: Technical data: - Registration date: 05/2021 - TÜV valid until 04/2028 - Trailer type: Two-axle - Construction type: Aluminium - Curb weight: approx. 830 kg - Permissible total weight: 2,400 kg - Payload: approx. 1,570 kg - Inner length: 3,157 mm - Inner width: 1,714 mm - Interior height: 2,364 mm - Overall length: 4,592 mm - Overall width: 2,235 mm - Overall height: 2,875 mm - Loading height: 445 mm - Very neat condition - Lightweight aluminum construction - High payload of approx. 1,570 kg - Ideal for horse owners, riding farms and private use Differential taxation!

turning diameter:33 mm turning length:330 mm control: 840 total power requirement:20 kW weight of the machine ca.:6 t dimensions of the machine ca.:3850,2000,2100 m 17 axes 3 revolvers with the powered tools 1 gantry with the driven tools Main and counter spindle with C axes Barfeeder Machine On-time 58,133 hours

pressure:060 t throat:220 mm stroke:6 - 94 mm no. of strokes:115 /min distance table/ram, max. stroke up, adjustment up:340 mm table surface area:680 x 400 mm hole in the table:120 x 70 mm table height over floor:750 mm passage to the back:290 mm ram surface:240 x 240 mm ram adjustment:57 mm power requirement:3,7 kW weight:2,8 t dimensions (WxDxH):1,5 x 1,5 x 2,2 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic

pressure:075 t throat:230 mm stroke:6 - 100 mm no. of strokes:105 /min distance table/ram, max. stroke up, adjustment up:354 mm table surface area:700 x 420 mm hole in the table:250 mm table height over floor:800 mm passage to the back:310 mm ram surface:264 x 270 mm ram adjustment:60 mm power requirement:5,5 kW weight:3,6 t dimensions (WxDxH):1,2 x 1,6 x 2,3 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1

pressure:150 t throat:350 mm stroke:6 - 122 mm no. of strokes:45 /min distance table/ram, max. stroke up, adjustment up:440 mm table surface area:820 x 600 mm hole in the table:330 mm table height over floor:820 mm ram surface:500 x 350 mm ram adjustment:75 mm power requirement:10,0 kW weight:7,3 t dimensions (WxDxH):1,6 x 2,2 x 2,9 m

pressure:150 t throat:350 mm stroke:6 - 122 mm no. of strokes:45 /min distance table/ram, max. stroke up, adjustment up:440 mm table surface area:820 x 600 mm hole in the table:350 mm table height over floor:800 mm ram surface:500 x 350 mm ram adjustment:75 mm power requirement:10,0 kW weight:7,1 t dimensions (WxDxH):1,5 x 2,1 x 2,9 m

material width:500 mm coil weight:3,0 t material thickness:0,2 - 2,5 mm coil internal diameter:470 - 530 mm coil external diameter:1400 mm no. of straightening rolls:9 straightening roll diameter:40 mm number of inlet and outlet rolls:4 material cross-cut:1200 mm² speed:1,5 - 30 m/min dimensions decoiler (WxDxH):1,9 x 0,6 x 1,7 m weight decoiler:1,1 t dimensions straightener (WxDxH):3,3 x 1,3 x 2,7 m weight straightener:3,0 t straightening machine:RYD 40 x 500 decoiler:DY 500 x 3000 coil lifting device:hydraulic rool feed:elektronic; AESL 500-2,8 threading device:hydraulic expansion:hydraulic