x ray machine used for sale

Digital printer Type: iGEN 150 SmartPress Manufacturer: Xerox Year: 2015 10.3 million sheets were printed in the 350x600mm format Machine in good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

Spray System spray.xact food 1000 mm Spray Grease System Precise, cost-effective, and highly reliable: Meet spray.xact, the next generation of contact-free spray lubrication. Designed for ultimate flexibility, this system applies oils and other media with pinpoint accuracy using a high-frequency valve and a single-substance nozzle. Unlike traditional compressed-air systems, spray.xact eliminates unwanted oil mist entirely—meaning you can skip the expensive extraction systems. The result? A low-wear, low-maintenance, and highly economical solution perfect for stamping, forming, fine blanking, and rolling mills. Technotrans offers tailored configurations to fit your exact needs: - spray.xact b: A flexible, modular design built for easy retrofitting in tight spaces. - spray.xact c: A compact, highly service-friendly unit enclosed in a robust stainless-steel housing. Both configuratio ...

Technical data: - Plate length approx. 3000 mm - Plate width approx. 2000 mm - Plate height approx. 310 mm - Thickness of the top plate approx. 70 mm - 8 pieces T-slots in table surface length 3000 mm - Center distance of the T-slots in the table surface 250 mm each - Center distance of the T-slots from outer edge 125 mm - T - groove width approx. 21 / 31 mm - T - groove depth approx. 30 mm - 4 pieces of adjustable feet - Space requirements L 3000 x D 2000 x H 810 mm - Weight approx. 4200 kg

Key data: 250 t, 4100 mm

Bystronic Xpert 250x4100 - CNC press brake Bending length: 4100 mm Capacity: 250 t - Bystronic 2 and 3D graphics control, ergonomic operating terminal with 15-inch colour monitor - Laser safety device AKAS, manually height-adjustable - Hydraulic crowning - Air bending - Radius bending - without tools - incl. operating instructions - Year of construction 2007 Technical data - Press force: 2500 kN - Bending length: 4100 mm - Standard stroke: 265 mm - Installation height (clear height between lower and upper beam): 550 mm - Distance between side stands: 3750 mm - Projection: 400 mm - Stop range: 1050 mm - X-axis travel: 590 mm - X-axis speed: 500 mm/s - Travel R-axis: 250 mm - R-axis speed: 150 mm/s - Z-axis speed: 1000 mm/s - Z-axis speed (6 axes): 500 mm/s - Y-rapid traverse: 190 mm/s - Y-operation: 1 - 10 mm/s - Y-operation for robot operation: 1 - 12 m ...

SEITZ Cross-Flow Filter MICROflow X05 Features: Length 1500 mm Width 650 mm Total height 1900 mm Weight 150 kg Material V2A Last Use Food

Work table can be rotated, supports can be extended.

In this package we offer the new Framax Xlife Plus upgrade with a panel height of 3.30 metres. 💡 With its integrated cross profiles and new transom system, the Facelift panels offer a high degree of flexibility when connecting brackets, panel supports and transoms. The powder coated finish gives a high quality, uniform appearance and makes cleaning quicker and easier. ✔ 100% compatible with existing FXP panels. 🔧 Unrestricted use of DokaXact possible. 🔨⚙🔧 Take the opportunity now to make your formwork projects more efficient and flexible! Price: from € 495,00 / PCS (excl. VAT).Price valid: per total quantity Partial quantity: possible Subject to prior sale Classified 2-star Serviced & ready to use. Basic cleaned condition. Medium used formwork & scaffolding with traces of use. Suitable for standard requirements. 11 x Framax Xlif ...

In this package we offer the new Framax Xlife Plus upgrade with a panel height of 1.35 and 0.60 metres. 💡 With its integrated cross profiles and new transom system, the Facelift panels offer a high degree of flexibility when connecting brackets, panel supports and transoms. The powder coated finish gives a high quality, uniform appearance and makes cleaning quicker and easier. ✔ 100% compatible with existing FXP panels. 🔧 Unrestricted use of DokaXact possible. 🔨 ⚙ 🔧 Take the opportunity now to make your formwork projects more efficient and flexible! Price: from € 270,00 / PCS (excl. VAT).Price valid: per piece Partial quantity: possible Subject to prior sale Classified 2-star Serviced & ready to use. Basic cleaned condition. Medium used formwork & scaffolding with traces of use. Suitable for standard requirements. ...

Doka Frami Xlife Wall Formwork †Click & Mix from Refurbishment Stock   Secure attractive Doka Frami Xlife wall formwork from Doka refurbishment stock †available immediately in Norway! This Click & Mix offer allows you to select the exact Doka Frami Xlife elements you need for your construction project †flexible and cost-efficient when purchasing used formwork.   Doka Frami Xlife formwork is a proven solution for foundations, walls, and smaller concrete components in building and civil engineering. It is ideal for companies looking to buy cost-effective wall formwork and rely on used Doka systems.   💡 Note: Material from Doka refurbishment stock †perfect for price-conscious buyers who need reliable Doka Frami Xlife systems and immediately available concrete formwork solutions. Packaging (e.g. pallets or transport boxes)  ...

In this package we offer the new Framax Xlife Plus upgrade with a panel height of 3.30 metres. 💡 With its integrated cross profiles and new transom system, the Facelift panels offer a high degree of flexibility when connecting brackets, panel supports and transoms. The powder coated finish gives a high quality, uniform appearance and makes cleaning quicker and easier. ✔ 100% compatible with existing FXP panels. 🔧 Unrestricted use of DokaXact possible. 🔨⚙🔧 Take the opportunity now to make your formwork projects more efficient and flexible! Price: from € 190,00 / PCS (excl. VAT).Price valid: per piece Partial quantity: possible Subject to prior sale Non-classified Formwork & scaffolding in uninspected or non-operational condition, but possible to recondition. Therefore the products are not suitable for any applications due to the lack o ...

In this package we offer the new Framax Xlife Plus upgrade with a panel height of 3.30 metres. 💡 With its integrated cross profiles and new transom system, the Facelift panels offer a high degree of flexibility when connecting brackets, panel supports and transoms. The powder coated finish gives a high quality, uniform appearance and makes cleaning quicker and easier. ✔ 100% compatible with existing FXP panels. 🔧 Unrestricted use of DokaXact possible. 🔨 ⚙ 🔧 Take the opportunity now to make your formwork projects more efficient and flexible! Price: from € 652,00 / PCS (excl. VAT).Price valid: per piece Partial quantity: possible Subject to prior sale Classified 3-star Serviced & ready to use. Professionally cleaned condition. Used formwork & scaffolding suitable for standard up to demanding requirements. 72 x Fra ...

In this package we offer the new Framax Xlife Plus upgrade with a panel height of 1.35 and 0.60 metres. 💡 With its integrated cross profiles and new transom system, the Facelift panels offer a high degree of flexibility when connecting brackets, panel supports and transoms. The powder coated finish gives a high quality, uniform appearance and makes cleaning quicker and easier. ✔ 100% compatible with existing FXP panels. 🔧 Unrestricted use of DokaXact possible. 🔨⚙🔧 Take the opportunity now to make your formwork projects more efficient and flexible! Price: from € 334,00 / PCS (excl. VAT).Price valid: per piece Partial quantity: possible Subject to prior sale Classified 3-star Serviced & ready to use. Professionally cleaned condition. Used formwork & scaffolding suitable for standard up to demanding requirements. 11 x Framax Xlife  ...

Upgrade instead of replacing: Doka Framax Xlife elements and accessories from rental stock in Denmark †perfect for expanding your inventory or getting started with Framax formwork! 💥 Whether you want to extend your existing Framax setup , fill specific gaps, or build your own system step by step †this click & mix offer gives you full flexibility. 🏗️ 🔹 Ideal for expanding your formwork inventory 🔹 Fully compatible with the Doka Framax Xlife system 🔹 Used, checked, and ready for immediate use 🔹 Original Doka quality †durable & cost-efficient 💡 Click & Mix: Choose exactly what you need †flexible and tailored to your project ! ⚠ Important: Required packaging will be charged additionally per piece . 🔥 Whether you’re a Framax pro or just getting started  ...

In this package we offer the new Framax Xlife Plus upgrade with a panel height of 3.30 metres. 💡 With its integrated cross profiles and new transom system, the Facelift panels offer a high degree of flexibility when connecting brackets, panel supports and transoms. The powder coated finish gives a high quality, uniform appearance and makes cleaning quicker and easier. ✔ 100% compatible with existing FXP panels. 🔧 Unrestricted use of DokaXact possible. 🔨⚙🔧 Take the opportunity now to make your formwork projects more efficient and flexible! Price: from € 252,00 / PCS (excl. VAT).Price valid: per piece Partial quantity: possible Subject to prior sale Classified 1-star Serviced & limited ready to use. Uncleaned condition. Heavily used formwork & scaffolding, suitable for minor requirements. 19 x Framax Xlife plus panel C 2 ...

Secure highly sought-after Doka Frami Xlife wall formwork in Doka rental park standard †available immediately in Norway ! This offer is designed as Click & Mix , meaning you can select exactly the right Doka Frami Xlife elements and, if needed, compatible accessories for your project †maximum flexibility when buying used formwork without unnecessary extra costs.   Doka Frami Xlife formwork stands for long-lasting quality, clean concrete finishes, and efficient work on site. It is ideal for foundations, walls, and smaller concrete components in building and civil engineering †a proven solution for anyone looking to buy reliable wall formwork . With this used Doka formwork in inspected rental park standard, you secure a cost-effective and immediately available solution for your construction project.   Additionally, please note: Packaging (e.g. pallets ...

In this package we offer the new Framax Xlife Plus upgrade with a panel height of 2.70 metres. 💡 With its integrated cross profiles and new transom system, the Facelift panels offer a high degree of flexibility when connecting brackets, panel supports and transoms. The powder coated finish gives a high quality, uniform appearance and makes cleaning quicker and easier. ✔ 100% compatible with existing FXP panels. 🔧 Unrestricted use of DokaXact possible. 🔨 ⚙ 🔧 Take the opportunity now to make your formwork projects more efficient and flexible! Price: from € 351,00 / PCS (excl. VAT).Price valid: per piece Partial quantity: possible Subject to prior sale Classified 2-star Serviced & ready to use. Basic cleaned condition. Medium used formwork & scaffolding with traces of use. Suitable for standard requirements. 23 x F ...

Now it’s getting serious on site: High-quality Doka Framax Xlife plus elements directly from rental stock in Denmark †available at attractive conditions! 💥 These durable wall formwork elements stand out with their long-lasting Xlife panel, excellent concrete finish, and maximum efficiency in use. Perfect for anyone who doesn’t compromise on performance. 🏗️ 🔹 Various dimensions available 🔹 Condition: Used, checked, and ready for immediate use 🔹 Ideal for wall and large-area formwork 🔹 Original Doka quality †durable & cost-efficient 💡 Special advantage: The material can be purchased individually †maximum flexibility for your project! ⚡ But be quick: lots like this sell fast †first come, first serve! ⚡ 👉 Send your request now and secure the ele ...

In this package we offer the new Framax Xlife Plus upgrade with a panel height of 2.70 metres. 💡 With its integrated cross profiles and new transom system, the Facelift panels offer a high degree of flexibility when connecting brackets, panel supports and transoms. The powder coated finish gives a high quality, uniform appearance and makes cleaning quicker and easier. ✔ 100% compatible with existing FXP panels. 🔧 Unrestricted use of DokaXact possible. 🔨 ⚙ 🔧 Take the opportunity now to make your formwork projects more efficient and flexible! Price: from € 460,00 / PCS (excl. VAT). Partial quantity: possible Subject to prior sale Classified 3-star Serviced & ready to use. Professionally cleaned condition. Used formwork & scaffolding suitable for standard up to demanding requirements. 112 x Framax Xlife plus panel  ...

🧣📦 Last chance for a smart site upgrade: The Doka cavity wall bracket 60 is now available in a clearance bundle †by pallet , fairly priced and ready to ship ! 💥 Whether you need a pouring platform , edge protection solution or system extension †this bracket is a perfect match for anyone using the Doka Xsafe XP system . Compatible. Durable. Cost-effective. 🔎 Why this deal makes sense: ✅ Compatible with Xsafe XP †a smart add-on for your edge protection system ✅ Versatile use †for pouring platforms and barriers on precast hollow-wall elements ✅ Galvanised finish †durable, resilient and immediately ready for use ✅ Sold by full pallet (10 pcs) †condition-based price tiers available ✅ Immediate availability †no waiting, no quote ping-pong ✅ Clearance pricing †sma ...

A Takamatsu CNC twin-spindle turning and milling center is available. 1) Turning diameter: 190mm, turning length: 150mm, max. one-sided machining length: 440mm, max. bar diameter main spindle/counter spindle: 51mm/42mm, spindle nose 1/2: A2-6/A2-5, spindle bearing 1/2: 100mm/85mm, main spindle bore 1/2: 52mm/43mm, spindle speed: 5000rpm, tool stations: 2×12, travel X1/X2: 162.5mm/170mm, travel Z1/Z2: 500mm/500mm, travel Y: +/-35mm, travel A: 550mm, machine dimensions X/Y/Z: approx. 3000mm/2250mm/2100mm, weight: approx. 7400kg, control: Fanuc 32i-B. 2) TOP Automazioni FU350SX bar feeder, max. bar capacity: 52mm, max. bar length: 3200mm, max. remnant length: 300mm, max. feed rate: 30m/min, max. bundle weight: 2000kg, machine dimensions X/Y/Z: approx. 4300mm/1400mm/1200mm, weight: approx. 1200kg. 3) LTA E 120-X-2-H filtration system, year of manufacture: 2022, filter stages: 2, extraction  ...

Inductive sensor, electronic sensor, safety switch, inductive proximity switch, proximity sensor, NAMUR sensor -Manufacturer: Telemecanique, Inductive proximity switch, unused, original packaging -Type: XS518B1PAM12 -Number: 3 sensors available -Price: per piece -Box dimensions: 95/40/H65 mm -Weight: 0.1 kg/pc.

The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames, - Noise Rating: 65 dB at 7m and 100% Load, - Stage V / StageV / Stage 5 / Stage5 / EU Stage V / EU StageV / EU V / EU Five / Stage Five / EU Stage 5 / Tier IV Final / Tier 4 Final / Tier4 Final; Gross weight [kg]: 815; Engine: Cat C2.2; Accessories: Tanker, Battery, Control Panel, Stahldach, - Sockets: 2x16A, 2x 32A, - Option for 24H tank as in 2nd picture.; Water Tank Volume [l]: 56

The Alfa Laval CMPX 213 XGP-74/4171-40 self-cleaning sanitary disc separator is used as a recovery and rework separator. Its function is to separate residual fat from the heavy phase, produce clarified wastewater, and recover approximately 10–40% of the fat, which is returned into the reprocessing of the line., Machine comes with the bowl, motor (18,5 kW), base plate with feet, water valves, all inlet/outlet pipes with pumps, service tools for maintenance and a big lot of spare parts., Additional features:, � ��Excluding:, - Motor cover., - Control panel., This separator is part of a butteroil production and purification process. The process flow is illustrated in the attached P&IDs and flowcharts., Butterfat is first melted and conditioned in the T100 proces ...

The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames, - Noise Rating: 65 dB at 7m and 100% Load, - Stage V / StageV / Stage 5 / Stage5 / EU Stage V / EU StageV / EU V / EU Five / Stage Five / EU Stage 5 / Tier IV Final / Tier 4 Final / Tier4 Final; Gross weight [kg]: 4784; Engine: Cat C9.3B; Accessories: Tanker, Battery, Control Panel, Stahldach, - Built-in switch 50/60 Hz, - Sockets: 2x16A, 2x 32A, 1x 63A, 1x125A; Water Tank Volume [l]: 667

The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames, - Noise Rating: 65 dB at 7m and 100% Load, - Stage V / StageV / Stage 5 / Stage5 / EU Stage V / EU StageV / EU V / EU Five / Stage Five / EU Stage 5 / Tier IV Final / Tier 4 Final / Tier4 Final; Gross weight [kg]: 4487; Engine: Caterpillar C7.1; Accessories: Tanker, Battery, Control Panel, - Built-in switch 50/60 Hz, - Sockets: 2x16A, 2x 32A, 1x 63A, 1x 125A; Water Tank Volume [l]: 822

The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames, - Noise Rating: 65 dB at 7m and 100% Load, - Stage V / StageV / Stage 5 / Stage5 / EU Stage V / EU StageV / EU V / EU Five / Stage Five / EU Stage 5 / Tier IV Final / Tier 4 Final / Tier4 Final; Gross weight [kg]: 2527; Engine: Cat 4.4; Accessories: Tanker, Battery, Control Panel, Stahldach, - Built-in switch 50/60 Hz, - Sockets: 2x16A, 2x 32A, 1x 63A; Water Tank Volume [l]: 518

Godwin HL80M high-pressure pump, , This dry self-priming high-pressure diesel engine pump is ready to tackle all the heavy work without complaining. With its robust 75 kW Deutz diesel engine (at 2200 rpm), it delivers impressive performance: a maximum capacity of 95 m³/hour and a delivery head of up to 85 meters. Whether its pressure testing pipes, irrigation, or a rinsing job after a fun weekend in the mud, this HL80M can handle it all., , Key specs:, , Type: HL80M, Drive: Deutz diesel engine, Fuel tank: 250 liters (you can keep pumping for a while before it gets thirsty), Consumption: ± 20 liters/hour at full load, Pressure connection: 4 flange, Suction connection: 4 V-piece quick coupling, Weight: 1,800 kg (solid, because quality weighs something), Dimensions: 2150 x 1130 x 2060 mm, Pump housing: cast iron – extremely strong, Impeller: cast steel – for when things get serious, M ...

plate thickness: 50 mm angle adjustable from - to: 25-55 Grad speed: 3 m/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Xiangfan/SPARK CNC large-format engine lathe is available. Swing diameter over bed/cross slide: 2200mm/1800mm, bed width: 1100mm, distance between centers: 8000mm, max. turning length: 7500mm, max. workpiece weight: 20t, max. workpiece weight between centers: 19t, main spindle bore: 140mm, bar capacity: 100mm, spindle speed: 200rpm, X/Z-axis travel: 920mm/7500mm, feed rate: 2m/min, rapid traverse: 3m/min, tool stations: 4, chuck jaw count: 4, chuck diameter: 2200mm, chip conveyor length: 8000mm, control: Siemens SINUMERIK 802D. Including coolant system, mandrel, chip conveyor and measuring system. Documentation available. An on-site inspection is possible.

A Kongsberg flatbed cutting and creasing plotter is available. Table dimensions X/Y: 1329mm/1834mm, working area X/Y: 1324mm/1624mm, max. speed: 50m/min, positioning accuracy: +/-0.2mm, repeatability: +/-0.05mm, material clearance: 50mm, max. tool force: 220kN, tool 1/2/3: drag knife/oscillating knife/creasing wheel, registration system: i-cut Vision Pro. Machine dimensions X/Y: approx. 2250mm/2000mm, weight: approx. 420kg, operating hours: approx. 250h. Documentation available. An on-site inspection is possible.

DOMINO A320i Inkjet Printer., Little used, in very good condition., Nozzle size:: 60 or 75 microns , Micropoint only:: 40 microns , Elec:: 240V 50 Hz , Dimensions (mm): 630x660 H 1680

Key data: 300 t

Manufacturer: Hylatechnik Paul Chrubasik GmbH Type: HSSP 300-3-XA4 Machine Type: Hydraulic Press Year of Make: 2000 Condition: used Press force: 3,000 kN Press force: 300 t Stroke: 300 mm Maximum installation height: 800 mm Table surface: 2,000 × 1,550 mm Plunger area: 2,000 × 1,540 mm Passage at the front: 2,000 mm Side passage: 1,050 mm Table height: 800 mm Fast forward: 340 mm/s Working speed 1: 32.5 mm/s Working speed 2: 19.5 mm/s Retraction: 340 mm/s Maximum working pressure: 280 bar Drive power: 75 kW Power supply: 400 V Frequency: 50 Hz Machine weight: approx. 38,500 kg Hydraulic oil tank: approx. 2,000 l Throw pillow: no Equipment: Complete DREHER conveyor system DREHER Belt Unwinder DREHER Belt Feed DREHER belt conveyor system Hydraulic cut impact damping with parallel hold Hydraulic Rolling Blocks Tool change consoles Siemens SIMATIC control ...

length: 800 mm width: 600 mm height: 1200 mm weight of the machine ca.: 0,4 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Suction: 660 l/min. Effective suction: 520 l/min On / switch-off: 8/10 bar container volume: 270 l voltage: 400 V / 50Hz power capacity: 4 kW turning speeds: 1025 U/min Sound power level: 69 dB dimensions: 960 x 740 x 1905 mm weight: 245 kg - Soundproof stationary piston compressor for work up to 10 bar - Smooth V-belt-driven 2-cylinder unit with two-stage compression - equipped as standard with all fittings and with rubber swinging elements - High performance refrigerated dryer with Super-Dry Technology and ECO shutdown - easily accessible condensate drain under the container The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate width: 2000 mm plate depth: 3000 mm plate height: 350 mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

To push the arm set open at RASM Kindly Contact Sai Bavani [F10, Purchaser] 011-79573840

Assembly tables with felt pad used, Stable design, feet adjustable, 2,7x1,97 m 2 pcs. Pricing per piece plus VAT ex location

3x9 support arms, external dimensions approx. 2000 x 1600 mm LxW 1pc k. from stock plus VAT

Assembly tables with felt pad used, Stable design, feet adjustable, with center support, 2,7x1,97 m 2 pcs. Pricing per piece plus VAT ex location

- The Trepko XPG 40 is a high-performance butter packing machine designed for automated packing of butter into various sizes. Known for its robust construction and outstanding reliability, this machine features advanced technology to ensure precise filling and wrapping., - Key attributes include:, - Versatility: Suitable for different butter formats and packaging styles., - Efficiency: High-speed operation reduces production time while maintaining top quality., - User-Friendly controls: Easy to operate, allowing for quick adjustments and setup., - Hygienic Design: Constructed with easy-to-clean materials, adhering to food safety standards., - Durability: Built to withstand the demands of a busy production environment., - The Trepko XPG 40 is a trusted solution for manufacturers looking to enhance their butter packaging processes, ensuring both efficiency and quality., Format: 100 x75 x 3 ...

MIKRON XSM 400 is a CNC Hochgeschwindigkeits Fräsmaschine, ausgelegt für hochpräzise Bearbeitung mit hoher Genauigkeit und Zuverlässigkeit. Verfahrwege X 400 mm, Y 450 mm, Z 350 mm; max. Werkstückgewicht auf dem Tisch 100 kg; Paletten EROWA 320x320 mm, Anzahl Paletten 7; Werkzeugmagazin 68 Plätze. Spindelaufnahme HSK E 40 bis 42000 t/min; Frässpindelmotor 14 kW; Anschluss 50 Hz 3x 400 V; Maschinengewicht ca. 6500 kg; Abmessungen ca. 4000x4000 mm. Zubehör: Späneförderer; Kühlmitteleinrichtung; Kühlnebelsprüheinrichtung; Papierfilteranlage; Beleuchtung; Kühlmittel-/Nebelabsaugung; Palettenwechseleinrichtung; Zustandsleuchte. Geeignet für enge Toleranzen in Branchen wie Automobil, Uhrmacherei, Werkzeugbau, Luft- und Raumfahrt und Medizintechnik. Technische Daten ohne Gewähr

Manufacturer: Epiroc Year of Manufacture Two units, one from 2019 and one from 2021 Model: Boomer XE3C Type of Machine: Drill Rig Carrier: - Engine: Deutz TCD 6.1, Tier 5 Final, 180 kW at 2300 r/min, catalyst and particulate filter - Fuel Tank Capacity: 150 liters - Electricity System: 24 V - Batteries: 2 x 125 Ah - Hydrodynamic Transmission: Dana 32000 - Front Axle: Dana 37R 116 - Rear Axle: Dana 213 by oscillation plus or minus 7 degrees - Tires: 14:00 x R24 - Hydraulic Jacks Front: 2 pcs, extendable sideways - Hydraulic Jacks Rear: 2 pcs - Service Braking: Two separate circuits - Brakes: Disc brakes, hydraulically actuated by two separate brake circuits - Parking and Emergency Brake Type: SAHR (Spring Applied Hydraulic Released) - Fire System: FORREX, hand held fire extinguisher - Tramming Lights: 8x40W LED, 2x70W - Work Lights: 2x160W plus 6x60W, 2 pcs joystick co ...

DOMINO A320i Inkjet Printer., Nozzle size:: 60 or 75 microns , Micropoint only:: 40 microns , Elec:: 240V 50 Hz, Dimensions (mm): 630x660 H 1680

CNC lathe with driven tools, year 2005, CNC 0i TC. Used machine in good condition. More info & price on IndustrialBuyer.

CNC lathe with driven tools, year 2003, CNC 18 TB. Used machine in good condition. More info & price on IndustrialBuyer.

Information: Technical data: - Registration date: 05/2021 - TÜV valid until 04/2028 - Trailer type: Two-axle - Construction type: Aluminium - Curb weight: approx. 830 kg - Permissible total weight: 2,400 kg - Payload: approx. 1,570 kg - Inner length: 3,157 mm - Inner width: 1,714 mm - Interior height: 2,364 mm - Overall length: 4,592 mm - Overall width: 2,235 mm - Overall height: 2,875 mm - Loading height: 445 mm - Very neat condition - Lightweight aluminum construction - High payload of approx. 1,570 kg - Ideal for horse owners, riding farms and private use Differential taxation!

turning diameter:33 mm turning length:330 mm control: 840 total power requirement:20 kW weight of the machine ca.:6 t dimensions of the machine ca.:3850,2000,2100 m 17 axes 3 revolvers with the powered tools 1 gantry with the driven tools Main and counter spindle with C axes Barfeeder Machine On-time 58,133 hours

pressure:060 t throat:220 mm stroke:6 - 94 mm no. of strokes:115 /min distance table/ram, max. stroke up, adjustment up:340 mm table surface area:680 x 400 mm hole in the table:120 x 70 mm table height over floor:750 mm passage to the back:290 mm ram surface:240 x 240 mm ram adjustment:57 mm power requirement:3,7 kW weight:2,8 t dimensions (WxDxH):1,5 x 1,5 x 2,2 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic

pressure:075 t throat:230 mm stroke:6 - 100 mm no. of strokes:105 /min distance table/ram, max. stroke up, adjustment up:354 mm table surface area:700 x 420 mm hole in the table:250 mm table height over floor:800 mm passage to the back:310 mm ram surface:264 x 270 mm ram adjustment:60 mm power requirement:5,5 kW weight:3,6 t dimensions (WxDxH):1,2 x 1,6 x 2,3 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1

pressure:150 t throat:350 mm stroke:6 - 122 mm no. of strokes:45 /min distance table/ram, max. stroke up, adjustment up:440 mm table surface area:820 x 600 mm hole in the table:330 mm table height over floor:820 mm ram surface:500 x 350 mm ram adjustment:75 mm power requirement:10,0 kW weight:7,3 t dimensions (WxDxH):1,6 x 2,2 x 2,9 m