wrapp used for sale

Fully reconditioned Benhil 8304 foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil. This machine is general overhauled and in a as good as new condition with new controls with frequency converter (renewed in 2023). The format on the machine is 10 - 25 gram, 40 x 30 x ± 10 - 25 mm, bottom folding principle. Packaging material: aluminium foil with photocell mark. Widht of the foil: 85 mm. The photocell line distance is 80 mm. The butter is feed with a hopper with agitator screw inside, mechanically drive from out of the main machine (tooth wheels and axles). The machine is equiped with a photocell on the paper infeed, to control the exact position of the print on the foil (correct by brake system). If there is no foil in the 1st cell, after cutting the foil in length, the machine will stop. The speed can be ad ...

Complete processed cheese packaging line existing out of a double-head automatic dosing / wrapping machine designed for the packaging of triangular portions of processed cheese, carton boxing machine and a banderol machine. The working process starts with the formation of the wrapping shells from reel-fed heat sealing aluminium foil for subsequent filling of processed cheese in the dosing station of the machine. A lid of heat sealing aluminium foil is placed inside the filled shell which is then folded over the lid and sealed by heated pressure pads. Each portion includes an internal ‘consumer-friendly’ easy opening tear strip and an external paper brand label. The portions are finally gathered in an 8 bundle configuration and carried onto the outfeed conveyor on a single lane. From here it is moved to the cartonising machine, adding the 8 portions in a carton box, adding a lid on th ...

Foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil or parchment paper. This machine is in a reasonable mechanical and electrical condition (renewed by Schuy, auftr. nr: 13632-01). The format on the machine is German Standard size: 250 gram, 100 x 75 x 35 mm, bottom folding. Capacity: up to 50 portions per minute. The butter is feed with an aluminium through with aluminium augers. Aluminium dosing station. The machine is equiped with a later build on photocell on the paper infeed, to control the exact position of the print on the foil. Outfeed conveyor., Additional features:, Excluding:, - Datecoder., Type of Machine: Butter Packaging Machine, Capacity: ± 750 Kg/h, Capacity (Units): up to 50 packages per minute, Packaging Weight: 250 gram, Packaging Size: 100 x 75 x 35 mm (German standard), Packaging type: Bo ...

Automatic foil wrapping machine which can be used for packing products like margarine or butter into aluminium foil. The machine is in a good as condition with main control panel with Siemens S7-200 PLC and frequency converter and operation panel with Siemens TD200 Operator Interface. Previously used in a margarine factory. The machine is equiped with a rotating forming drum with 4x rectangular molding chambers. The format on the machine is 250 gram, 98 x 65 x ± 41 mm. SIG folding principle (folding flap on the side, for less foil usage). The margarine is feed with a direct connection with compensator and return line. The machine is equiped with a photocell on the paper infeed, to control the exact position of the print on the foil. The speed can be adjusted by a frequency converter between 30 - 120 packages per minute (depending on product, packaging material and surrounding conditions ...

Used IMA P10K Automatic Butter Roll – Round – Log – portion wrapping machine in aluminium foil / parchment paper., The machine is included with the following pack format sets:, - Logs (or) Rolls (or) Round (or) Cylinder – ± 43 mm x 110 mm = 125 gram (complete), - Logs (or) Rolls (or) Round (or) Cylinder – ± 48 mm x 160 mm = 250 gram (complete including extra mouldset of ± 45 mm to reach ± 230 gram)., - Rectangular Blocks (or) Portions – 100 mm x 75 mm x 35 mm = 250 gram (filling nozzle and 1x guide for the bricks when they are upside down are missing)., - Rectangular Blocks (or) Portions – 160 mm x 105 mm x 65 mm = 1.000 gram (Guiding plate upside down, side guides and support level missing)., Product is fed through the hopper which includes a butter screw feeder., Maximum Speed: up to 60 packs per minute (Varies depending on the portion size), Products that can be pack ...

New shrink foil packaging machine Brand: Erregi Type: EASY 250 This plant consists of the wrapping machine and the shrink tunnel. The wrapping machine is formed of a suitably reinforced steel chassis, an infeed and an outfeed conveyor belt. In machine chassis there are the following components: - The driven upper roller - The system for unrolling the lower roller, consisting of a driven roller and a pneumatic assisted idle roller. - The system for welding and cutting the upper and lower PE sheets consisting of a special alu profile, with temperature controll and changable steel blade for carry out the cold cut. - The infeed and outfeed transport belt is likewise made up of reinforced steel chassis on which a closed link belt is mounted. The shrink tunnel consists of two chassises. - One holding the heated part and one supporting the former. - This system wi ...

new foil wrapping machine brand: ERREGI type: Compact 250 line consisting of 2 parts: wrapping machine and shrinking tunnel, with infeed and outfeed elements With automatic selection of 3 or more foil widths. wrapping machine: length of welding bar: 2.500 mm number of reel pairs top: 3 max. width of top reels: 2.450 mm number of reel pairs bottom: 3 max. with of bottom reels: 1.450 mm width of conveyor belts: 1.300 mm length of exit belt: 2.400 mm length of infeed belt: 3.500 to 2.200 mm (telescopic) working height (conveyor): 800 mm opening height (max. workpiece height): 700 mm min. workpiece weight: 5 kg shrinking tunnel: installed power: 54 kW average hourly consumption: 35 kWh length of shrinking area: 2.700 mm total length of tunnel: 3.700 mm width of conveyor: 1.500 mm working height (conveyor): 800 mm opening height (max. wor ...

capacity: bis zu 120 Paletten/h laut Hersteller serial number: 430336 Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your company to do an on-site survey. Our DRINK technicians are working worldwide for our customers! We are looking forward to hearing from you. All information is supplied without guarantee.

HALOILA Film wrapper Model no.: Octopus T200 Manufacturing year: 2015 Maximum power: 20 kW Full load current: 45A Voltage: 3400VAC Frequency: 50Hz Max short circuit current: 6kA

used, as good as new butter wrapping machine from SchmidtTec. Year of construction 2017 Output up to 1,200 pcs./hour Filling volume: 125g Format: L=100mm, W= 55mm, H= 25mm The machine was used for packaging goat butter. Mint condition.

General SKU367T1099 LocationBarneveld MakeRobopac TypeEcoplat FRD No.KN /114967 Year of construction2012 Main Features MaterialStainless steel Motor0.9 KW Specified Features - Miscellaneous MaterialStainless steel Motor0,9 kW Information Total height2,8 m Weight345 kg CEcheck Floor space1,65x2,6 m Extra SpecificationsRotation speed table: 4-10 rpm 2400 mm wys 1600 mm MiscellaneousRobopacMiscellaneous > MiscellaneousBrand > Robopac What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Description:  , GENERAL MACHINE DESCRIPTION: A. Roller Conveyor for cell entry B. Machine for aluminium adhesive tape winding and cutting. C. Nr. 2 machines for butile adhesive tape application, tube and polietilene adhesive tape wrapping around and for aluminium tube end cutting. D. Machine for aluminum tube coining. E. Machine for internal tube diameter calibration on one or both ends. F. Pick-up for cell moving on single machines or from machines to roller conveyors. G. Conveyor for worked cells unloading.  , DIMENSIONS OF CELLS  , This sytem is projected to work cells type: COMBI BOTTOM and COMBI TOP.  , NOTE: Machine is not under power, already dismantled. Approx. Onsite Dimension. (l x w x h): 15,000 x 15,000 x 6,000 mm, weight approx.: 50,000 kg

R23536/12 ELSNER Roller cutter "Semi Auto Rewinder" Model: MSR - 42 Built: 2004 Working width: 100 cm for secare rolls , gift wrapping paper Rolling diameter: 1000 mm Roll-up diameter: 305 mm Material: from light-weight tissue to heavy kraft paper, e.g. flower foil PP etc., newsprint, nonwoven... pneumatic crushing knives on cutting shaft Shaft for 70 he sleeve Automatic shut-off Available: immediately

R25972/18 GUSCHKY Spiral sleeve winding system Model: Built: Availability: instantly Wrapper: Manufacturer: Guschky Technical data: Area inner diameter 20-100mm Area wall thickness 4.5mm Maximum belt speed 50 m/min Engine power approx. 10 kW Voltage 220V Three-phase current 50 Hz Air pressure 6 bar -------------------- pneum. Saw: Manufacturer: Guschky Built: 1990 Technical data: Area inner diameter 20-100 Area wall thickness 4.5mm Sleeve length 400 - 6100 mm --------------------- unwinder and glue station Manufacturer: Gasser Built: 1986 Technical data: Gluing Diving Process Number of paper webs 8 + 1 separate deck Available: immediately

1 of used shrinkpacker (sleever with shrinktunnel), make KHS Kisters, type SP 035 V Basic, new 2003. Operating direction: left. Capacity upto 35 cycles/minute (in overspeed). Metering-belt type infeed. For over-wrapping & shrinking pre-packed trays. Last used for various collations of glass / PET bottles (330 - 2.000 ml) on tray. Suitable for print-registered film. With Siemens S7 PLC and Simatic OP, Indramat drives. Wired for 400 V / 50 Hz. Various manuals available. Condition: good. Available ex-warehouse The Netherlands.

The system is set up to: PET bottles 0,5 lt 32,000 b/h 1,0lt 29,000 b/h 1,5lt 22,000 b/h 2, 0 lt 18,000 b/h. Additionally for oneway glass bottles 0,25 lt / 27,000 FL/h. Consisting of: -Depalletizers, make. Zecchetti, type: DEPAL 800 B - SN: 1821, for PET and glass bottles, 30,000 FL/h, origin 1994 -for glass bottles:-rinser, make Rivi, 60 pliers 2 nozzles type: twin rinser 2R/60/132, origin. 1994 -glass-bottle filler, Fabr. Simonazzi, type: Eurostar 70.16.8 TK-RAA. 040, with 70 filling valves and 16 crwon heads and aluminium screwcapper 8 head origin 1981 -filling height Inspector, make HEUFT, type: SPECTRUM HBBVXTI36,origin1994 -dating NAGI A 300 year 2002 -shrink packer for glass bottles, makeBaumer, type: T/R 60-40 Univers,1994 -beverage mixer, make Simonazzi,type: Predosix D3 T3, 15.000 lt/h,origin 1984 -beverage analyser, make. Maselli blue, type: RIT-843 BRIX-CO2  ...

For the columns and crushing of wrapped paper, cardboard or plastic rollers on core. Power 5, 5kW 16Ampere control PLC supported with two-hand safety control - key-operated switch - emergency off pull cord - cutting force 25 to - speed ca. 17, 3 mm / sec - cutting Canal to process roles of maximum roll length approx. 1500 mm max roll diameter 800 mm - weight of the machine approx. 2500 kg - noise level < 80dB(A) - hydraulic pressure 200 bar - tank capacity 90Liter - hand Guard - color machine/Cabinet - RAL 7035 (light grey) guard - RAL 1028 (melon yellow) machine immediately available Price and further details on request

Ganzlagenpalettierer for PET shrink-wrapped with Linienverteilerf from 1 to 3 single clock bands and pallet loading station with centering. Performance 2400 shrink-wrapped (6) Control PC controlled.

Feeding Station No product feeder 4 product feeders Foil wrapping station End sealing station Outfeed to Stacker Available: sofort

Used automatic tray packing machine, model B 700 PAR Multifile Mag Manufacturer: MONTPACK Country: Italy New: 1992 Machine capacity: 6-7 packages/min The maximum packet size: 720 x 400 x 380 mm Supply voltage: 380 V Power: 18 kW Power consumption: 10-12 kW / h The maximum diameter of the film roll: 300 mm The maximum length of the film roll: 720 mm Compressed air supply pressure: 6 bar Machine weight: 800 kg Dimensions: 6.1 x 2.5 x 2.2 m (L. X width. X height.)   The machine forms 2x3 packages with PET bottles 1l trays without flanges shrink-wrapped in foil. Shrink tunnel is equipped with a 15-heaters, dual chamber with two ventilation systems; operates at 220 ° C.

1 of used traypacker, make Kisters (KHS), type 140/80T, new 1992. Operating side: left. Last used for 73 and 99 mm diameter food cans as 6 or 12 on tray, with option to apply a tray lid. Capacity upto 80 trays/minute. Fitted with Siemens S7 plc + touchscreen and Indramat MI servo drives (2012!). Wired for 400V/50Hz. Machine can be elaborated with a Kisters wrapping station and shrinktunnel to create an 80-cycle trayshrinkpacker (operating direction to change to right).

Cat.-No. 14-00218 PET line for still and carbonated beverages Format: 1.5 L, production capacity: 20,000 bottles / h in a very good condition Year of construction: 2001 working hours: 42.389 the plant built up yet, but is currently out of operation Machine manufacturer year details Blow moulding machine SIG BLOMAX 16 2001 including molding water inlet, elevator and hopper, cooler (Rahim) Molding m Tanner VZT 3000 dosing system 2001 air transporters 2001 buffer tank 14 m³ Alfa Laval 2001 short time pasteurisation KHS Innopro KZE 2001 330 HL / h Triblock (Rinser, filler, Capper) KHS Innoclean/Innofill 120/10 2001 volume filler Capsule conveyors with supply tank Filling height control HEUFT basic 2001 labeller KHS Anker 2001 label control HEUFT HBF 150000 ST 2001 laser encoder video Jet 3430 2001 shrink film Packer SMI SK 800 T 2001 tray Packer in 6 Pack film (50 ppm)  ...

The Rollenspalter is suitable for the columns and crushing of wrapped paper, cardboard or plastic rollers on core, or bail. Power 7, 5kW Control Siemens PLC supported with two-hand safety control -Cutting force 2x20to -Cutting speed 22, 3 mm / sec -Cutting channel length 2000 mm -Cutting channel height 1200 mm -Machine weight approx. 3500 kg colour of machine body RAL 7016 (anthracite grey) Guard RAL 1028 (melon yellow) Photos and more info on request Delivery time: approx. 12-14 weeks

1 Qty. 1 Second-hand Palletiser Mfc.: Kettner Type: KR51-238 Capacity: 20 000 btl./h Built: 2001 2 Qty. 1 Second-hand Wrapping Machine Mfc.: Robopack Type: Rotaplat 2000A Capacity: 20 000 btl./h Built: 2001 3 Qty. 1 Second-hand Bottle inspector Mfc.: Krones Type: Linatronic 712-288 Capacity: 36 000 btl./h Built: 1998 4 Qty. 1 Second-hand Monoblok (Filling & Labelling Machine) Mfc.: Krones Type: K126-690 Capacity: 36 000 btl./h Built: 1998 5 Qty. 1 Second-hand Labelling Machine Mfc.: Krones Type: Universella 723-A47 Capacity: 20 000 btl./h Built: 1993 6 Qty. 1 Second-hand Bottle rinsing machine Mfc.: Sipron AG Type: C2-5000 Capacity: 20 000 btl./h Built: 1993

SIG F140 250 gr. 60 punches/min Capacity: 900 kg / h wrapping in aluminum foil / parchment paper Condition: Very good

Picker Rad View--Tomo with the following device components: generator Rad View 65 tube Dunlee DU 304 C004-30 0,6/1,2_year of manufacture 2004 vertical stand Pausch • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipment in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • The sales take place as "used" to resellers or distributors, despite full functionality without warrenty/guarantee. • Installation and commissioning must only be performed by specialist staff with the appropriate qualifications.

1 of used film-only shrink wrapper, make ZVT (KHS), type SP030V, new 2000. Operating side: left. Capacity 30 cycles/minute nominal, 35 cpm in overspeed. Siemens S7 PLC. Indramat EcoDrive servo's. Used for PET bottles in clear and print-registered shrink-wrap film as: 500 ml, D 63.5 x H 230 mm, 3x2=6, dual-lane, 1.000 ml, D 80 x H 281 mm, 3x2=6, dual-lane, and 1.500 ml, D 89 x H 332 mm, 3x2=6, dual-lane. Future option (no parts supplied) was 2.000 ml, D 100 x H 349 mm, 3x2=6 and 2x2=4, dual-lane.

GE UroView 2800 (urological x ray and fluoroscopy) with the following device components: Generator Jedi 00-883988 -01 _ 65 kW Tube Varian A-286 0.3/1.2 Image amplifier _ 00-884063-01 32.5 cm OEC workstation ESP Cine (trolley with double monitor) Sony Video Graphic Printer UP-960 CE Review-/double monitor (flat screen) complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do ...

Built in 2009/2005 Size min. 100 x 120 mm Max 300 x 430 mm Thickness Film thickness 20-100 mµ Mechanical speed 25,000 CPH Equipment 10 stations rollstream ROS 1 VSE-ROS-ES-RE-300-KWE twin multi disc unwind station 4 MTD AWS OWK built in 2005 JET feeder 8 JEF-450-FVM SA190 built in 2005 foil wrapping machine CMC 2800 with two feeders built in 2009 twin stacker CMC

Picker SureView M2 with: Tube M-147 0.1/0.3 Bucky 18x24 and 24x30 Without radiation protection wall complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians before placing into ...

Products For square, rectangular or round biscuits and baked goods suitable for roll separation Feed/System integration • For feeding pillow-pack and wrapping Machines • Presentation direct to portioner always with vibratory channels • Manual or automatic portioner infeed • Own drive Technical features • 4 to 12 channels

Foil wrapping machine for single rods, manufacturer BOEHL type master S-1000 VA. Year of construction 1998 dimensions: 50mm width - 930 mm, height: 20mm - 720 mm. minimum length: 750 mm. Control cabinet with control panel with S 7 controls and safety fence. Operating side is "right". Good condition!

Carestream Direktview CR 950 with: 2x Control panel 25 cassettes: 18x24-8 pcs. 24x30-5 pcs. 35x43-12 pcs. complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians before plac ...

AGFA ADC Compact with: Readout unit/ID tablet Workstation complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians before placing into patient use.

Winding machine / squirrel wrapper / dough wrapper in a very good used and functional condition. Can be used for rolling and winding teigen etc. Completely made of stainless steel, transport belt supported by air, bandwidth 46 cm, can also be operated in combination (4x in stock). Dimensions W/D/H 190/70/130 cm. Workshop tested, ready for use. More on request.

CAM automatic bundling wrapping machine G60 is a new concept machine, designed to carry out bundling and complete wrapping of parallelepiped shaped products, at very high speed, using heat-sealable plastic film and, upon request, Kraft paper. It maintains ample flexibility of employment, guaranteeing high performance and reliability. The completely automatic working cycle, requires the operator only for wrapping material reel change. This operation is quicker thanks to the rapid film replacement device. The second reel shaft is supplied standard with the machine. Pre-arranged for easy and rapid change-over, this machine is extremely versatile. All adjustment facilities have been arranged on the operator's side, while structural elements, which limit accessibility to the product handling, have been eliminated. The machine basement enables complete separation of product handling area  ...

- 1 x Onyx type 6252 inserting machine Sn. 35226-2 - 1 x main product shuttle feeder typ 289.0400 (signature feeder) - 1 x opening station - 3 x insert feeders - 1 x 'special product' feeder (eg. pen, CD, cosmetic samples etc inserts) - 1 x Safir typ 6270 filmwrapping machine (individual wrapper) Sn. 35226-1 - conveyors

Sollas S60 wrapper for cardboard packaging The plant was built in 2007 by Sollas Deutschland GmbH & Co KG. Since then it has been used for packing cartons. It has a product retraction function, so that folding boxes can also be welded with feet. ” Aggregate: wrapper s60 60 pcs. /min. Film rollers: Max. Outer diameter 400 mm Max. Roll width 435 mm Min. Internal diameter 70 mm Max. Internal diameter 83 mm Min. Cutting length 50 mm Max. Cutting length 750 mm Dimensions of the packaged goods: Length: 40 mm/300 mm Width: 20 mm/200 mm Height: 16 mm 96 mm According to the information provided by the manufacturer, the machine is designed for the following packaging materials: - Coated paper - PP - PE The machine is designed for the complete or partial packaging of products. Unpackaged food is not compatible.

Manufacturer: DG Italy Model: 2400 Performance: up to 400 PCs / min Engine power: 380 V Machine dimensions: 2100 x 1300 mm Electr.data : 1,5 kw ACMA GD 2400 Candy wrapper for "double twist" or "Twist on Top" this machine can both, up to 400 pieces/min Machine is in good working condition, one oval format size on the machine Machine documentation / manual available

Food Pack machinery / flow pack machine. The machine is designed for wrapping various products for food industry products or other non-food products in film. Manufacturer: Food Pack Machinery SRL Italy Type: Leonardo 700 Year of production: 2010 Control from the color touch screen panel Max film width 700 mm Dimensions: Length 6160 mm, Width 1390 mm, Height 1860 mm Weight: 600 kg Electricity: 380 v., 50 Hz, 6.4 kW Without need: 6 bar Packaging film: Polyethylene The width of the machine's packaging tunnel can be changed according to the width of the wrapper (film) with a handwheel and a digital display. The height adjustment works the same way. The machine is in good condition and clean.

Carestream (Kodak) Direct view DR 9000 with the following system components: Generator Fischer Imaging Corp. DX 80 HF Tube Dunlee DU 404 0.6/1, 2_year of manufature 2004 1 x detector Trixell Pixium 4600_year of manufacture 2004 separate X-ray table • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipment in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • The sales take place as "used" to resellers or distributors, despite full functionality without warrenty/guarantee. • Installation and commissioning must only be performed by specialist staff with the appropriate qualifications.

Qty. 1 Second-hand blower and PET filling line Mfc.: SIG (Germany), KHS (Germany), Robopack (Italy) Built: 2006 / 2007 Stopped: 10 / 2020 Product: Beer Cap type: PCO 1881 Technical Data 1. Blowing machine Mfct.: SIG Type: Blomax 6 Year: 2007 Cap Type: PCO 1881 PLC type: ABB controller Consisting of: Blowing machine pre-form feeder (without tipper) chiller (Mfct.: Riedel, 2007) Capacity: at 2 litres: 8,400 bottles / h at 1.5 litres: 10,500 bottles / h at 1 litre: 10,500 bottles / h 2. Filler Mfct.: KHS Type: INNOFIL EM/125/R/PET 54 / 9 / Rinser 36W Year: 2007 Total working hours: 90,000 Product: Beer Cap type: PCO 1881 Consisting of: Rinser, Filler, Capper (incl. cap feeding system) Cap feeding system: Mfct.: Hormes, Year: 2007 3. Cleaning system / CIP station Mfct: KHS Type: Innopro – CIP Year: 2007 Consisting of: Stainless steel tan ...

For the columns and crushing of wrapped paper, cardboard or plastic rollers on core. Engine power 7, 5kW 16Ampere control PLC supported with two-hand safety control - key-operated switch - emergency off pull cord - cutting force 30 to - speed ca. 17, 3 mm / sec - cutting Canal to process roles of maximum roll length approx. 1500 mm max roles dur diameter approx. 800mm - weight of the machine ca. 2900 kg - noise <80dB(A) - hydraulic pressure 200 bar - tank capacity 90Liter - hand guards machine available now Subject to prior sale Price and further details on request

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: Pactec Dresden (Nagema) Type: EL9 Hard boiled sweats wrapper for double twist YoM: 1992 output capacity: up to 650 pcs. / min. in depent of the product format size: length 20 – 40mm width 12 – 25mm high 8 – 16mm Electrical: 380 V, 50Hz, 4 kW dimensions: 200014001620mm (LWH) Weight: 1500kg qualification: double-twist wrapping machine for Hard candy different: Machine is in good working order & ready to use (permanently maintenance) We offer this machine in 'as is' condition, without warranty, ex Warehouse Hess. Lichtenau, unpacked

Italian manufacturer PFM Spa the horizontal packaging machine model SWIFT made for making packages of the type Flowpack. Packaging, wrapping or bagging all types of food like biscuits, balls, connected products, bars or non-food products., SWIFT can accommodate a wide range of products thanks to its adjustable forming box, offering the solution for fast and efficient size changes. The configuration change can be made in about 3 minutes, without compromising packaging speed. Horizontal packing machine with rotating sealing jaws, designed to wrap at speeds of up to 100 bags per minute. Model: Swift C8051 Pack lenght min 80 – max 350mm Pack width min 15 – max 180 mm Wrapping material: Heat or coldsealable , polypropylene, micro-perforated, different laminates power: 380V, 50 Hz, 3,1 kW Year: 2005 Very good condition

GE Revolution XR/d with the following system components: Generator Jedi 80 tube MX 100 0.6/1.25 1 x detector 41cm 41cm separate mobile X-ray table company Zetta • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipment in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • The sales take place as "used" to resellers or distributors, despite full functionality without warrenty/guarantee. • Installation and commissioning must only be performed by specialist staff with the appropriate qualifications.

Erka wrapping machine for baguettes with long roller table new bands technically checked

Siemens AXIOM sire Skop SD with the following system components: Generator Polydoros SX 65 Tube Optitop 150/40/80 HC 0.6/1.0 digital image processing Fluorospot compact Image intensifier Sirecon 40-4 HDR 40 cm The sale is to resellers or distributors despite full functionality without warranty as "Used", EXW Freiberg, Saxony, Germany. You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, properly lashed and wrapped with stretch film and can be picked up immediately.

Carestream DryView 6850 (laser printer) The sale is to resellers or distributors despite full functionality without warranty as "Used", EXW Freiberg, Saxony, Germany. You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, properly lashed and wrapped with stretch film and can be picked up immediately.

Mobile shrink tunnel for the shrinking of film wrappings. Max. band width: 460 mm.