135,190 used machines on RESALE, but how to find them? Machine Search
Description Item #8909 - CHOCOLATE BAR WRAPPER Manufactured by SAPAL Model BB, Nominal capacity up to 160 bars per minute on plain bars. Set up for a 100g bar, measuring 125mms long x 77mms wide x 12mms high. Could also wrap an 80g bar of the same size smaller height (less chocolate filling in mould). Foil & Paper fed from reel. With NORDSON Series 3100 Glue Unit. 380Volts, 50hz.
Description Item #8938 - CHOCOLATE HOLLOW GOODS FOIL WRAPPER Manufactured by OTTO HANSEL Model HPU, Type U Has been used to foil 10-12g hollow chocolate footballs and runs at circa 40 per minute. It has some change parts though not all complete, for a 17g easter egg and a 15g stubby shape. Also available & included are the corresponding polycarbonate chocolate moulds for spinning hollow shapes : 41 sets for footballs 8 x 4 per mould, 99 sets for stubby 8 x 3 per mould and 54 sets for 17g easter eggs 8 x 4 per mould.
Description Item #8941 – CHOCOLATE BAR WRAPPER Manufactured by SIG Model DST Currently set up for a 68/70gramme filled bar Measuring 130mms long x 37mms wide x 16mms high Foil & Label both fed from a reel Heat Seal Foil, Glue Seal Label up to 150 bars per minute With NORDSON Glue Unit, With SIEMENS Simatic HML PLC Controls
Description Item #8956 – DOUBLE TWIST WRAPPER FOR CHOCOLATES Manufactured by OTTO HANSEL Model X8002 Currently set up to wrap chocolate balls approx. 28mms diameter With Vibratory Product Feeder 380Volts, 3Phase, 50Hz
Description Item # 8970 - (2) CANDY SINGLE TWIST WRAPPERS Manufactured by ROSE-THEEGARTEN Model A3-SA Each with Vibratory Product Bowl Feeders Each with PLC for reading printed product film Set up for hard candy piece size approx. 26mms long x 22mms wide
Description Item # 8971 - (2) CANDY DOUBLE TWIST WRAPPERS Manufactured by CARLE & MONTANARI One is Model CM.H500 Set up for approx. piece size 28mms long x 22mms wide One is Model CM.H70 : Set up for approx. piece size 28mms long x 22mms wide Each around 350 pieces per minute
Description Item # 8978 – CANDY CUT AND WRAP STICKPACK WRAPPER Manufactured by THEEGARTEN Model U1-Falt Cut & Wrap Machine Set up for piece size approx. 31 x 19 x 7.5mms Model F1 Stickpack Wrapper Set up for stickpack size approx. 97 x 31 x 8mms (5-piece)
Description Item #9016 - CHOCOLATE BAR WRAPPER Manufactured by SAPAL Model TD Was wrapping a 100gramme bar, measuring 157 x 75 x 8mm Depending on bar type, speed is up to 120 per minute 2-Stage Wrapping Foil From Reel, Label From Stack9016 -
Description Item #9056 - CHOCOLATE BAR WRAPPER Manufactured by SIG Model DSN, Was doing a Foil and Label from stack, or Foil & Cardboard Outer Wrap (parts included are for foil/cardboard outer). Foil fed from reel, label or cardboard outer from a stack. Foil is also heat sealed before outer wrap of label or cardboard. nominal capacity at around 120/130 bars per minute. Including a ROBOTECH Concept B5/2 Glue unit for the outer label or cardboard, Machine includes parts for 100grammes Foil & Cardboard Outer Bar parts. 100g bar dimensions : Length 188 x width 96 x height +/-6mm depending inclusions Machine is mounted on an Air Cushion Transport System Optionally available for an extra price parts for 150/180/200grammes Foil & Label Bars. Dimensions: Length 188 x width 96 x height 10.85mm (Height depending on the weight, but format parts are the same for 150 – 180 and 200g)
Description Item # 9070 - FLOWPACK WRAPPERManufactured by FUJIModel FW3710/BSWith SplicerMachine in stainless steel1-Up Rotary Cutting Knife MotionInfeed Belt with 3 x SensorsBrush Action Wrapping StationLast being used to pack chocolate trays measuring 206mms long x 61mms wide x 54mms highMaximum pack size is 340 x 200 x 100mms high.FUJI infeed is about 1250mms longNominal maximum capacity 150 packs per minute
Description Item # 9092 - (7) BISCUIT ROLLWRAPPING MACHINESManufactured by SIGModel GTP RollwrappersModel ZEP Biscuit Feeders/Loading Machines, stack lengthSuitable for Rectangular, Round & Square Biscuit Rollwrapping, including crackers & sandwich biscuitsEach GTP is up to 60 packs per minuteMachine size range from minimum 90 x 40 x 36mms high, 40mms diameterTo maximum 280 x 80 x 70mms high, 70mms diameterServo based IRT Controls
Description Item # 9129 – FLOWPACK WRAPPER Manufactured by FUJI Model Alpha VI FW3400 Year 2008 3 x 200Volts, 50/60Hz, 30A Also with a MARKEM SmartDate 5 Coding Unit (missing cassette reel Holder, not included) 100/230Volts, 50/60Hz, 1-2A Stainless Steel Flowpack Wrapper 4metres Long Infeed, currently set with 150mm lug gaps on Infeed Chain Driven 2-up Knife Head, 200mms across photocell for printed films Splicing PRO-FACE Plc Controls Was running at around 200 packs per minute Can run up to a maximum of about 400 packs per minute, depending on product/size/feeding system
Description Item # 9137 - CHOCOLATE NEAPOLITAN WRTAPPER Manufactured by KLOCKNER HANSEL Model Speedy 7216 400Volts, 3Phase, 50Hz Single Stage Wrapper Foil & Label feeds both from reel Set up for a 34 x 34 x 5mms piece With NORDSON 3400V Glue Unit nominal capacity at up to 400 pieces per minute, depending on product, size, type of feeding
Description Item # 9159 - DEPOSITED HARD CANDY PRODUCTION & WRAPPING DEPARTMENT LINE 1 for mono products (single colour) / swirl / double layer / splash: BAKER PERKINS Kitchen THEEGARTEN Cooker BAKER PERKINS Depositor and Cooling Tunnel. 66 strokes per minute. Mould sets for round 19,3x19,3x11,5mm - piece weight 2.75g (196.02kg/hr); small oval 21,8x17,8x10,3mm - piece weight 3g (213.84 kg/hr) and large oval 26,5x20,8x12,3mm - piece weight 4.5g (320.76 kg/hr) LINE 2 for mono products (single colour): BAKER PERKINS Kitchen THEEGARTEN Cooker BAKER PERKINS Depositor and Cooling Tunnel. 66 strokes per minute. Mould sets for small oval 21,8x17,8x10,3mm - piece weight 3g (213.84 kg/hr) and large oval 26,5x20,8x12,3mm - piece weight 4.5g (320.76 kg/hr) WRAPPING MACHINES: Conveyor feed system from lines to wrapping machines with LOMA metal detector One BOSCH model BVK0030E high speed flowpack wra ...
Description Item # 9212 – (2) DOUBLE TWIST WRAPPER FOR CHOCOLATES Manufactured by NAGEMA Model EU7 Each including a DINATEC Aligner/Feeder, Each also with a BENNE Transfer Conveyor, Wrappers were each running at around 200 pieces per minute Doing 10-11grammes products, measuring 31 x 17 x 12, 28 x 17 x 13, 30 x 15 x 11 & 29 x 13 x 11 EU7 Product dimensions - Length: 20 – 60mm - Width: 13 – 27mm capacity 180 - 380 per minute
Description Item # 9213 – (2) DOUBLE TWIST WRAPPER FOR CONFECTIONERY (Fruits De Pates) Manufactured by NAGEMA Model EU7 Each with a BERNAY AUTOMATION Vibratory Feed Hopper, type Bol, Running on 11.85grammes pieces One shared Discharge Conveyor EU7 Product dimensions - Length: 20 – 60mm - Width: 13 – 27mm capacity 180 - 380 per minute
Description Item # 9215 - (2) DOUBLE TWIST WRAPPERS Manufactured by OTTO HANSEL set up to wrap chocolate pieces measuring 24mms x 11,5mms 220Volts, 50Hz, 3Phase Each Wrapper also including a Product Aligner/Feeder Model X8003(HBX) Model X8002(HBX)
Description Item # 9216 - FLOWPACK WRAPPER Manufactured by REDPACK (UK) model P325 S year 2021 including MARKEM SmartDate X65 Printer speed up to 250 per minute 400volt, 3ph, 50hz, 5kva Sealing jaws width. Is 140mm 2-up knife Coder is 53mm Infeed is 200cm Total lengths is 460cm.
Description Item # 9221 - SHRINK WRAPPER & TUNNEL Manufactured by BECK PACKAUTOMATEN Model B250/50 230/400Volts, 3Phase, 50Hz
Description Item # 9227 - FLOWPACK WRAPPER Manufactured by TEVOPHARM Model Pack-6 Built by ENTREC (Belgium) in Year 2011 Their Model Number Enpack-6-L 3Phase, 400Volts, 50Hz 1-Up Knife Head, This machine was built for big chocolate tablets. 1 kg 241x112x38mm with capacity of 24ppm 2,5 kg 250x215x45mm with capacity of 16ppmm 5 kg 430x240x45mm with capacity of 8ppm The Enpack-6 flow wrapper is a mechanical driven machine. Servo driven 2-way spotcorrection on sealing table. 2nd set sealing rollers is heated. Static pre-heating block between 1st and 2nd set of sealing rollers. Water cooled top plates on sealing table. Cross seal unit with CTC 159 (space between the two shafts = 110mm) 1 upper- and 1 lower sealing jaw, L=298mm, W=25mm, transvers profile (in running direction of foil). Cut off length: max 499mm, min 100mm. Flight bar transver unit in cross seal unit. Max foil width = 650mm Inc ...
Description Item # 9233 - CHOCOLATE BAR WRAPPER Manufactured by NAGEMA Model EB1 The machine can pack filled bars, solid bars and bars with inclusions. overhauled by Schokoma in 2024 Currently set for a 200g tablet (Dubai tablet) 1st format 200g: Length: 161mm Width: 78mm Height: 15mm 2nd format 100g: Length: 147mm Width: 70mm Height: 7mm foil from reel label from stack cold glue seal for labels Output approx. 60-80 tablets per minute
Description Item # 9257 - (2) CHOCOLATE COIN WRAPPERS Manufactured by DOMINICI Model M200 year 1997 coin size 37mm diameter, 3mm thickness (do not come with embossing stamp/die) 440volt, 60hz
Description Item # 9268 - FOIL WRAPPER FOR CHOCOLATE EGGS Manufactured by RASCH Model RU 3Phase, 380Volts, 50Hz Set up to wrap 13gramme eggs Measuring 29mms long x 23mms diameter With Rolling device
Description Item # 9277 - HARD CANDY WRAPPING MACHINE - VIENNA STYLE Manufactured by THEEGARTEN PACTEC Model EL9 Overhauled by AMP Rose year 2011 speed around 400 per minute The dimension of the paper is: 128x58mm The dimension of the product is: 34.2x12.7x12.7mm
Description Item # 9293 - FLOWPACK WRAPPER Manufactured by RECORD Model Scorpion MD-SP Year 2007 up to 120 packs per minute MD = Multi Drives, 3 axis, 3 x brushless servomotors, touch screen graphic display, 50 x product memories Previously used to pack skillets of biscuits Very long infeed conveyor to act as a stockage of product as well as getting the indexation correct With a DOMINO V230i thermal transfer overprinter Fitted with an adjustable folding box, this unit is suitable for wrapping a variety of products in printed or clear film. Sealing jaws - 350mm long. Infeed conveyor - 185mm wide. Outfeed conveyor - 220mm wide. Overall dimensions - 4670mm L x 1350mm W.
Description Item #9323 – CHOCOLATE FOIL WRAPPER - for flat bottom products and egg rolling attachment Manufactured by IPAC (Italy) Model AFC2 OV, Year 1993 Currently with parts for : Hearts 40 x 40mms, Rounds 35mms diameter and 30mm diameter Rectangular 40 x 20mms. nominal capacity around 40/50 pieces per minute.. 12gramme Eggs 38 x 25mms, Max size egg is Ø26 x 42 mm (with appropriate parts) brush wrapping kit and egg rolling device. 380Volt/50Hz
Description Item # 9332 - (2) DOUBLE TWIST WRAPPERS FOR HARD CANDY Manufactured by NAGEMA One is a Model EU4 Year 1980 One is a Model EU8 Year 1982 Both machines set up for a 2gramme hard candy piece Measuring 18.1mms long x 13.3mms wide
Description Item # 9336 - CHOCOLATE EGG FOIL WRAPPER Manufactured by RASCH Model RGE-95 Suitable for large eggs Currently set up for 120 x 80mms diameter eggs Rolling Device Electrics are 415 v / 50hz
Description Item # 9345 - FLOWPACK WRAPPER Manufactured by KLOCKNER TEVOPHARM Model P200-U Year 2003 Also with a KLOCKNER TEVOPHARM High Speed Cross Feeding Conveyor Model AD-8 Year 2003 Previously running on Praline bars, measuring 60 to 100mms long x 30mms wide x 15mms high Running at around 250 bars per minute Coding units included
Description Item # 9362 - CHOCOLATE NEAPOLITAN WRAPPER Manufactured by SAPAL Model BN-e With ROBATECH Concept Hot Glue Unit Up to 200 wraps per minute, depending on product size & feeding
The Smipack XP 650 ALX is a fully automatic monobloc overlap shrink wrapper with an inline infeed conveyor. It packs products like glass/PET bottles, cans, jars, and boxes at speeds up to 25 packs per minute using a single film reel system. [1, 2, 3, 4], Key Features, Operation Modes: Works with film-only, or with pad/tray configurations depending on exact model variations (like ALX-T or ALX-P)., Infeed System: Multi-row inline infeed with an electromechanical oscillating sorter to align products., Film Handling: Single film reel design with optional printed film centering devices., Shrink Tunnel: Built with an efficient double-chamber shrinking setup. [1, 2, 3, 4, 5, 6], Technical Specifications, Max Output: Up to 25 packs per minute (ppm), Max Product Height: 380 mm, Max Reel Size: 650 x Ø 400 mm, Working Pressure: 6 Bar, Machine Weight: Approx. 1,682 kg, ed linking conveyor into a hi ...
Used Used Zambelli shrink wrapper: Year: 2002 Condition: As Is Model: LFT 70 Year: 2002 Speed: 50 ppm Number of infeed lanes: 4 Types of bundles processed: 2.0 L still water, square bottle (3x2 format) 1.5 L still/carbonated water, round bottle (3x2 format) 1.0 L still/carbonated water, round bottle (3x2 format) ? ? 87.5 mm 1.0 L still/carbonated water, round bottle (3x2 format) ? ? 78.8 mm 0.5 L still/carbonated water, round bottle (4x3 format) Operation: automatic Version: film launching Type: film only Code: F 86 More details: https://bottlingscout.com
Material : PP, PS, APET, CPET, PLA, OPS, EPS, PVC // Forming Area (Vxh): 780x570
For Sale: Automated Film Wrapping and Strapping Packaging Machines 1. Film Wrapping and Shrink Packaging Machine — CMB 600 Manufacturer: CMB Model: 600 Description: Automated film‑wrapping and shrink‑packaging machine designed to wrap products in suitable plastic films, seal them, and optionally shrink them for stable, transport‑ready bundles, operating with multiple modules, safety systems, and format‑adjustment options. 2. Automatic Strapping Machine — RQ-8X Manufacturer: StraPack Corp Model: RQ-8X Automatic Strapping Machine Description: An automatic strapping machine that applies, tensions, and seals polypropylene straps around packages to secure them quickly and consistently. Benefits of Combined System Together, both machines serve to stabilize, protect, and prepare goods efficiently for storage or shipment through reliable wrapping and strapping processes. F ...
REF-2732-2733 BELCA SLEEVE WRAPPER WITH SHRINK TUNNEL Manufacturer: BELCA 1) Sleeve wrapper: • Model: BEP 60 REVISTAS • Serial no.: L-433-E • Year: 2012 • 1 kW/380 V • Sealing bar: 650 mm • Overall dimensions (mm): 1,400 x 1,250 x 2,000 (LxWxH) 2) Shrink tunnel: • Serial no.: L-288-V • Year: 2005 • 17.53 kW/380 V • Aperture: 670 x 380 mm (WxH)) • Tunnel length: 1,030 mm • Overall dimensions (mm): 2,200 x 1,250 x 1,750 (LxWxH) Both machines can be purchased together or separately.
Corner wrapping machine HJ-40 - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Corner wrapping machine HJ-40 Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Corner wrapping machine HJ-40 Price: 2800 EUR Download PDF Corner wrapping machine HJ-40 The device is brand new. The machine glues cardboard corners with paper tape or foil. Technical data: Tape length 5-35mm Depth of the hoof 10-300mm Tape width 19mm Performance 20-40 cycles / min Weight 230kg 380V power supply Ask About The Product Name (required) Company name Email (required) Phone Message (required) Newsletter Do not miss the new ...
EKH-455 Shrink Wrapping machine - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl EKH-455 Shrink Wrapping machine Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers and Lifts Laminators Offset printing machinery Others Packaging machines Paper drills Perfect binders Pile turners Spare parts Stitching machines EKH-455 Shrink Wrapping machine Price: 1375 EUR Download PDF EKH-455 Shrink Wrapping machine Machine ready to use. Photos show the actual product. Description: The main advantages of shrink wrappers include simultaneous sealing and shrinking, small dimensions, and easy portability. They are an ideal solution for shops, bakeries, warehouses, archives, bookstores, etc. They offer adjustable sealing time a ...
IML DA 900 Rigid Box Automatic Wrapping Machine - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl IML DA 900 Rigid Box Automatic Wrapping Machine Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers and Lifts Laminators Offset printing machinery Others Packaging machines Paper drills Perfect binders Pile turners Spare parts Stitching machines IML DA 900 Rigid Box Automatic Wrapping Machine Price: 18750 EUR Download PDF IML DA 900 Rigid Box Automatic Wrapping Machine This machine is practically new. Year of manufacture: 2016. Application: Wrapping veneer on a box. Made in Italy. This automated machine is designed for forming solid board boxes by wrapping veneer on a solid board box. This is the latest version o ...
To be dismantled on site Auction-ID: A3-46152-9123
Kiener Skinetta Pac-Systeme ASK-300 bundler and stretch wrapper, output up to 32 packs per minute. Maximum reel width 300mm. Maximum final pack dimensions 380mm (W) x 360mm (L) x 290mm (H). Includes stacking unit.
Pallet stretch-wrapper PIERI Speed 100 pallets/h Control SIEMENS S 7
Many thanks for your interest on our second hand machines, please find follow our offer: Manufacturer : SIG Type : SB horizontal flow-pack YOM : 1988 Package size range : min. 60 x 30 x 5 mm (lxbxh) max. 410 x 180 x 75 mm (lxbxh) Trigger length : between 90 and 470 mm depending on the format range Roll width : up to 590 mm Output : up to 250 pcs./minute; infinitely adjustable Electricity : 220-380 V; 3 ph; 50 Hz supply chain length : ca. 5000 mm different: double foil roll holder automatic film splicer PLC Control date printer good Condition Nagema wafer cutter 5m long belt infeed We offer this machine in 'as is' condition, without warranty ex Warehouse Hess. Lichtenau, unpacked
MADE directly from the manufacturer of PREMIUM quality large stock for all manufacturers! Conveyor belt / conveyor / new merchandise directly from the manufacturer, MaÃ?anfertigungSpeziell new for Growi - round bale Uncoiler stable conveyor belt / conveyor belt for many applications in industry, agriculture, wood u.v.m. with 3 tissue deposits. - endless with 3-fold different finger-joint dimensions: length 3,000 mm x width 1,200 mmFür Kverneland (3,250 mm x 250 mm), or other manufacturer on request on request, we can the conveyors / conveyor belts on Cut out their individual dimensions. (All lengths and widths possible) We ship worldwide we deliver worldwide, please ask for shipping costs! Not is your desired size? No problem! We customize for you! BELTech GmbH in Lüdenscheid
Stations: Round table with 8 forming cells Paper forwarding and folding device Date stamp station Volumetric dosing with trough End folding station Pressing station Evacuation to off-conveyor Off-conveyor 1200 mm long Dosing station in food safe design Electric control in its own cabinet CE conform Package format: 75 x 50 x 35 mm or 100 x 75 x 53 mm or 120 x 80 x 60 mm Dosing range: from 250 to 500 g. Option up 1000 g. Output: 80 packages / min.
Volumetric filling system: 100-250 g. Output: 40-80 packages / min adjustable Package size: 75 x 50 x 35 mm or 100 x 75 x 35 mm Product: Butter, margarine, etc. Machine used, completely overhauled.
Performance: 80 packs / min. Dosing range: 100 to 250 g. Products: Butter, margarine, etc. Used, completely overhauled.
Pester PEWO-fold 1 overwrapping machine for single cartons and carton collations, in OPP-, PVC-, PE-materials, with foil width from 90 mm to 300 mm, film thickness from 0.02 mm to 0.05 mm, maximum roll diameter 350 mm. Size range min. 60 x 60 x 20 mm, max. 400 x 350 x 140 mm, Machine controlled using ELAU/Schneider PacDrive, Electrical connection 3x400V, V+N+PE/50-60 Hz, connected load 5.2 kW/12.5A, Operating pressure 4 bar, compressed air 4 to 10 bar. Infeed height approx. 900 mm, outfeed height approx. 900-950 mm. Output up to 60 cycles/collations per minute. Includes: Infeed conveyor, 1100 mm long x 260 mm belt width, outfeed conveyor, 2000 mm long x 260 mm belt width, Alpha Compact labeller, PEWO-collect collating table, miscellaneous sets of format parts
Stainless infeed 1500mm, 200mm jaw width, adjustable temperature jaw / fin seals, overall length 2500mm
maximum number of results exceeded
please refine your search
1.000 € 
