used WP uc

pressure: 25 t stroke: mm table surface area: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Brand: WP Capacity: 25 T Distance between columns: 760 mm Distance between cylinder and table: 950 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

WPC production line 1. Twin-screw extruder GWC 80-156 2. Twin-screw extruder GWC 65-132 3. CAL 14000/6 calibration table 4. ROL 240 two-track haul-off 5. Saw 240 6. Cheyenne SP2 brushing machine 7. SR-RP700 wide-belt sander 8. Storage device 9. Mixer 500 / 1000L + weighing system 10. Complete line for pulverization + drying room Pulverizer Installed power: 26 [kW! Turnover 3300 [Rpm]! Capacity: 300 [kg / h]! Grain size: 65-80 [mesh]! Input material size

Approx. Onsite Dimension. (l x w x h): 800 x 900 x 1,400 mm, weight approx.: 200 kg

Tank internal dimensions (lxwxh) 700x550x500mm Exterior dimensions (lxwxh) 880x730x750mm Basket dimensions (lxwxh) 640x490x80mm Ultrasound peak power 8000W 40 kHz operating frequency (others available) max. capacity 175Liter Heater 6KW 400V/50 Hz Clip on lid or hinged cover possible also available rinsing baths or dripping plates.

System: Used Westfalia Separator as semi-mobile dewatering unit Manufacturer: Westfalia Model: full coat screw centrifuge Design: as a semi-mobile dewatering unit Type: UCF 646-00-35 Power: 110 kW Screw drive: 30 kW, IP54, 50 Hz -Accessories: inlet pipe for the feeding of sludge -Decanter connectors: solids discharge chute 1.4301, Central chute, including sample tap 1.4301 -Sludge feeding: rotary piston pump Börger CL520 Flow rate: 50-120 m3/h Power: 11 kW -Mud meter: ABB, COPA XE, DN 100 -Solvents - and dosing station: fully automatically to the release of liquid products Designed for a dose of: 35 kg FHM/h Make: P + P -Eccentric screw pump: to promote the use solution over the subsequent dilution station to the decanter Make: Netzsch, 2-8 m3/h Power: 1.5 kW FU: included in the control -After dilution station: to the Hrabsetzung of the root solution to power consu ...

Type: UC 80 for Max: 80kg flour for maximum: 120kg dough

Pump vacuum cleaner with integrated submersible pump that continuously pumps absorbed liquids out of the container, RCDs in the mains connection cable, special filter bags, application-oriented accessories. The pump can be completely removed and the container closed, so this industrial vacuum cleaner can also be used as a normal wet-dry vacuum cleaner. Areas of application: Suction/suction of large quantities of liquid, use in floods, use in flat roof renovation, cleaning of garden ponds and pool facilities. SCOPE OF DELIVERY Including accessory set pump vacuum cleaner. Additional filter 1 x FSS 1200 (foam) Filter bag 1 x FSN 80 1 x Suction hose Ø 35 mm x 5 m 1 x Drain hose Ø 33 mm x 5 m 1 x Handle tube plastic with secondary air slider 2 x Suction pipe plastic (each 50 cm) 1 x Aluminium professional floor nozzle 45 with rubber and briste strips EQUIPMENT Main filter FPP ...

Used Spiral Kneader / Chargenneter W&P, Type: UC80 A -In the bakery state- - including 3 tank wagons - for 80 kg flour or 120 kg dough - in the bakery state - Condition: Good, ready for immediate use Sightseeing and test run are of course possible at any time on request.

Rotor shears/universal shredders Knife width: approx. 1,500 mm Drive 1 x 45 kW and 1 x 55 kW with control cabinet, hydraulic station, inlet hood, substructure additionally 2 sets of shredding tools as well as 4 pallets of various wear parts BEZNER trigger tape 1.400mm x 5,6m

- UCN 2 Board for Utility Cabinet - HP Part Number CT356-00593 - for HP Indigo Series 3 Machines

We sell 25 x Cisco UCSB B200-M5 Servers All systems are EU systems. In most cases, the entire item can only be handed in completely. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many other refurbished/used hardware available from the areas of the systems mentioned here as well as from other systems of these manufacturers: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at a reasonable price from HASCON! The sale is only made to companies. We have available complete systems and components in refurbished conditions  ...

We sell 7 x Cisco UCSB-B200-M4 1 x Cisco UCSB-B200-M5 2 x Cisco UCSB-B420-M4 9 x Cisco UCSB-B480-M5 24 x Cisco UCSB-EX-M4 Total count: 43 In most cases, the entire item can only be handed in completely. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many other refurbished/used hardware available from the areas of the systems mentioned here as well as from other systems of these manufacturers: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at a reasonable price from HASCON! The sale is only made to companies. We ...

This MIMAKI ucjv300-160 3D Printer was manufactured in the year 2018 in Japan. The machine has a maximum resolution of 1200dpi.

Video available

Key not present

Output: 225 crates/h, with documentation, an inspection is possible.

CNC vertical machining center MIKRON UCP 710 With path control Heidenhain TNC 426/430 Year of construction: 1998 Travel: X 710 Y 500 Z 500 Speed range: 0 – 12,000 rpm infinitely variable With the following accessories: NC swivel rotary table NCRST 630 600 mm x 600 mm clamping surface Vertical tool changer with 30 magazine slots Full protection cabin with sliding doors and interior lighting Electronic handwheel Renishaw Tool Measurement Probe TS 27 R 3D probe infrared Renishaw MP 12 Conveyor Coolant device 4 pcs height-adjustable machine shoes Operating instructions

2-hole flange bearing -Type: M-UCT205JD1 -Price: per piece -Number: 8x available -Weight: 0.9 kg/piece

Fully automatic filling line GALDI, type: RG 250 UCS - Filled in PE paper laminated cardboard packaging 0.5 and 1.0 liters - Sterile air in the filling room - Sterilization of containers - CIP cleaning for filling system possible - Drip-free filling - Suitable for products with high or low viscosity - Any quantity to be filled can be set - Operating hours: 13,162 h Matching tray packer and conveyor system also available.

Plummer Block Housings, Plummer Block Housings -Number: 4 pieces bearing block with bearing -Type bearing block: NTN 320 -Type of bearing: UC320 -with shaft seal -Bearing: Ø 100 mm -Number: 4x bearings available -Price: per piece -Dimensions package: 550/340/H240 mm -Weight: 43 kg

Electronics cables, extension cables, electronics cables -Manufacturer: Draka Comteq, data cable -Type: UC2000 B_A 4G50/125 FRNC -Length: 130 m -Price: complete -Dimensions roll: Ø 500/330 mm -Weight: 20 kg

Ultrasonic sensor, sensor -Type: UC2000-30GM-E6R2-V15 -unused from: warehouse liquidation -Protection class: IP 65 -Housing: stainless steel (rustproof) 1.4305/AISI 303 plastic parts PBT -Weight: 200 g

Flange bearing -Bore: Ø 20 mm -Mounting hole: Ø 12 mm -Bore distance: 64 mm -Dimensions: 130/130/H50 mm -Number: 16x available -Price: per piece -Weight each: 1.7 kg

PLC control, central assembly, RAM, CPU, central device, central processing unit, compact device, compact CPU, central processing unit -Manufacturer: Schleicher, Master CPU Central Processing Unit -Type: UCN 31306786 -Quantity: 1x module available -Dimensions: 150/35/H200 mm -Weight: 0.6 kg

x-travel: 600 mm y-travel: 450 mm z-travel: 450 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC control Heidenhain iTNC530 NC swivel-rotary table (B-axis and C-axis) pallet changing device UPS 320mm x 320mm 30-fold automatic tool changer electronical hand wheel coolant through spindle device (IKZ) chip conveyor coolant device Technische Daten / technical details: Verfahrweg X / X-Travel 600 mm Verfahrweg Y / Y-Travel 450 mm Verfahrweg Z / Z-Travel 450 mm B-Achse Schwenktisch / B-axis swivel table -115 / +30 ° C-Achse Rundtisch / C-axis rotary table 360 ° Tischgröße / table size 320 x 320 mm Werkzeugschaft / spindle taper HSK 63 Drehzahlbereich / spindle speed 100-20000 UpM /rpm Werkzeugwechsler / tool changer 30 fach /fold Gewicht der Maschine ca. / weight ca. 9000 kg Technische Daten, Zubehör und Beschreibung d ...