workshop tools used for sale

Three shelves 2 fixed wheels and 2 swivel wheels with brake Ergonomic screwed handle Height with wheels: 78.4 cm Width: 66.3 cm Depth: 35 cm Maximum load capacity: 150 kg Never used Overall dimensions: 800 x 600 x 200 mm Weight: 10 kg Auction-ID: A7-50796-414

: neu : ca. 10 Wochen ab Auftrags : Türkei : 17700 € : 339.84 € : 100 to : fix : 300 mm : 680 mm : 1520 mm : 8 mm/s : 5 mm/s : 10 mm/s : 500x1520 mm : 100 mm : 190 mm : 2630 mm : 1000 mm : 2350 mm : 2500 kg 2 guidings upper plate with T-slots table plate with T-Slots manometer rapid down move with automtic changeto working speed piston stops in every position 2 hand control table height adjustable according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 21500 € : 412.8 € : 150 to : fix : 300 mm : 610 mm : 1520 mm : 9 mm/s : 5 mm/s : 10 mm/s : 600x1520 mm : 100 mm : 190 mm : 2630 mm : 1000 mm : 2470 mm : 3200 kg 2 guidings upper plate with T-slots table plate with T-Slots manometer rapid down move with automtic changeto working speed piston stops in every position 2 hand control table height adjustable according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 5500 € : 106.15 € : 30 to : fix : 775 mm : 5 mm/s : 10 mm/s : 1500 mm : 700 mm : 2015 mm : 400 kg steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cabinet dimensions, 560 × 730 × 800 mm, 5 drawers , Sold without contents Auction-ID: A1-51172-104

Three shelves 2 fixed wheels and 2 swivel wheels with brake Ergonomic screwed handle Height with wheels: 78.4 cm Width: 66.3 cm Depth: 35 cm Maximum load capacity: 150 kg Never used Overall dimensions: 800 x 600 x 200 mm Weight: 10 kg Auction-ID: A7-50799-417

Three shelves 2 fixed wheels and 2 swivel wheels with brake Ergonomic screwed handle Height with wheels: 78.4 cm Width: 66.3 cm Depth: 35 cm Maximum load capacity: 150 kg Never used Overall dimensions: 800 x 600 x 200 mm Weight: 10 kg Auction-ID: A7-50799-415

Three shelves 2 fixed wheels and 2 swivel wheels with brake Ergonomic screwed handle Height with wheels: 78.4 cm Width: 66.3 cm Depth: 35 cm Maximum load capacity: 150 kg Never used Overall dimensions: 800 x 600 x 200 mm Weight: 10 kg Auction-ID: A7-50798-413

Three shelves 2 fixed wheels and 2 swivel wheels with brake Ergonomic screwed handle Height with wheels: 78.4 cm Width: 66.3 cm Depth: 35 cm Maximum load capacity: 150 kg Never used Overall dimensions: 800 x 600 x 200 mm Weight: 10 kg Auction-ID: A7-50798-394

Three shelves 2 fixed wheels and 2 swivel wheels with brake Ergonomic screwed handle Height with wheels: 78.4 cm Width: 66.3 cm Depth: 35 cm Maximum load capacity: 150 kg Never used Overall dimensions: 800 x 600 x 200 mm Weight: 10 kg Auction-ID: A7-50798-416

Workshop crane Type: Hydraulic Motor Crane Lifting capacity: 2 tons Maximum lifting height: 260 cm boom length: adjustable from 109 – 164 cm Hydraulic System: Two-stage hydraulic pump Cylinder: Hydraulic cylinder with oil bypass system against overextension Construction: Heavy-duty welded steel frame Profiles: Square steel box sections Wheels: 6 swivel wheels Version: foldable Weight: 86 kg Condition: Unused Auction-ID: A3-46142-1284

Three shelves 2 fixed wheels and 2 swivel wheels with brake Ergonomic screwed handle Height with wheels: 78.4 cm Width: 66.3 cm Depth: 35 cm Maximum load capacity: 150 kg Never used Overall dimensions: 800 x 600 x 200 mm Weight: 10 kg Auction-ID: A7-50799-414

4x cupboard with hinged door and 2x cupboard with roller shutter door; content consisting of various office materials; personal protective equipment such as helmets; gloves; heard stops; Breath Filters Auction-ID: A1-50864-95

Workshop set with degreaser tray, oil collector, barrel rack and grease pump Specifications: Degreaser tray / parts cleaner Electrical connection: 220/230 V Degreaser tank dimensions: approx. 1,200 × 1,100 × 620 mm Oil drip tray with steel grid and barrel rack Dimensions oil collection tray/barrel rack: approx. 1,250 × 1,300 × 1,100 mm Manual grease pump with reservoir and hose Total lot weight: indicatively approx. 400–600 kg Features: Underlying vessel for cleaning/degreasing agent Oil drip tray with heavy steel grids Integrated steel rack/barrel stand Draining option Kramp Pangea Oil 15W-40 engine oil Various jerry cans, reservoirs and other workshop accessories visible in the photos Particularities: Sold as one complete lot. The remaining amount of oil and other liquids is unknown. Used condition with signs of use, oil and soiling. Operation not test ...

cupboard with 2 hinged doors; Contents consisting of various electrical components Auction-ID: A1-50864-96

Unused in the original packaging Excluding content Packing size : 850 x 650 x 1950mm Auction-ID: A1-40407-16

Unused in the original packaging Excluding content Packing size : 795x535x2100mm Auction-ID: A1-40407-62

Grey workshop cabinet metal with roller doors and 4 metal shelves; with low gray roller shutter cabinet with 1 shelf size 120x45x100cm LxWxH ; cabinets are sold with contents with the exception of any administration; CAUTION! Lot is located on the 1st floor only accessible by stairs. Auction-ID: A1-50864-175

Workshop gantry crane, 2.0 ton electric 380 volts, clearance width 3.80 m - carrier track, clearance height 4.5 m, Lifting height chain hoist 4.0 m

Workshop crane Type: Hydraulic Motor Crane Lifting capacity: 2 tons Maximum lifting height: 260 cm boom length: adjustable from 109 – 164 cm Hydraulic System: Two-stage hydraulic pump Cylinder: Hydraulic cylinder with oil bypass system against overextension Construction: Heavy-duty welded steel frame Profiles: Square steel box sections Wheels: 6 swivel wheels Version: foldable Weight: 86 kg Condition: Unused Auction-ID: A1-51368-13

Consisting of a work table with a steel base, size approx. 108x77x100 cm with contents, including toolbox, storage bins with hammer letters, among other things Swing door cabinet dimensions approx. 100x55x202 cm with content Wooden work table size approx. 110x78x87 cm with contents chest of drawers and sorting tray cabinet Wooden wall board and whiteboard Auction-ID: A1-50663-1334

Stainless steel workshop cabinet Dimensions: 2210 x 600 x 2050 mm Loading: 32 drawers Drawer dimensions: 450 x 480 x 120 mm capacity per drawer: 40 kg Closure: Drawers lockable Doors: 4 doors Dimensions doors: 520 x 620 mm Handles: Aluminum handles Colour: stainless steel Frame: Black powder-coated frame Fronts: Stainless steel fronts Weight: 395 kg Condition: Unused Auction-ID: A1-51368-51

Workshop crane Type: Hydraulic Motor Crane Lifting capacity: 2 tons Maximum lifting height: 260 cm boom length: adjustable from 109 – 164 cm Hydraulic System: Two-stage hydraulic pump Cylinder: Hydraulic cylinder with oil bypass system against overextension Construction: Heavy-duty welded steel frame Profiles: Square steel box sections Wheels: 6 swivel wheels Version: foldable Weight: 86 kg Condition: Unused Auction-ID: A1-51368-225

Workshop crane Type: Hydraulic Motor Crane Lifting capacity: 2 tons Maximum lifting height: 260 cm boom length: adjustable from 109 – 164 cm Hydraulic System: Two-stage hydraulic pump Cylinder: Hydraulic cylinder with oil bypass system against overextension Construction: Heavy-duty welded steel frame Profiles: Square steel box sections Wheels: 6 swivel wheels Version: foldable Weight: 86 kg Condition: Unused Auction-ID: A1-51368-123

excluding content Packing size 795x535x2100mm Auction-ID: A1-40333-84

excluding content Packing size: 850x650x1950mm Auction-ID: A1-40333-81

Workshop crane Type: Hydraulic Motor Crane Lifting capacity: 2 tons Maximum lifting height: 260 cm boom length: adjustable from 109 – 164 cm Hydraulic System: Two-stage hydraulic pump Cylinder: Hydraulic cylinder with oil bypass system against overextension Construction: Heavy-duty welded steel frame Profiles: Square steel box sections Wheels: 6 swivel wheels Version: foldable Weight: 86 kg Condition: Unused Auction-ID: A3-46110-1323

Operation not tested Auction-ID: A1-40333-65

Arntz Blue Line saw blade Length: 5800 mm Specification: 41 x 1.3 mm 2/3 K Carbide band saw blades with pre-cutting and post-cutting geometry for machining non-ferrous metals and graphite. The specialist for: - Aluminium alloys - Aluminium bronzes - Copper alloys - Sand-cast aluminium and magnesium castings - Graphite

Hartner Multi-Step Drills Precision reimagined. Efficiency made tangible. Made in Germany. The multi-step drills are the intelligent further development of classic HSS and HSS-E twist drills. Thanks to their innovative step-drill geometry, the drills deliver significantly higher performance, greater precision, and noticeably improved drilling comfort in daily use. What makes the multi-step drill so special? Unlike conventional HSS drills that machine material in a single cutting action, the multi-step drill works in several defined cutting stages. The result is smooth, low-vibration operation with significantly lower force requirements. Additional advantages include optimal chip removal, perfectly round and precise holes, and almost burr-free hole exits. Even when used with hand drills and cordless drills, the special geometry enables controlled drilling without jamming or slipping in t ...

Complete wheel sets for the production and subsequent sharpening of HSS and carbide tools. Single diamond and CBN discs. for the manufacturing and Resharpening. Grinding wheel shots short and long run. Spacer discs for grinding wheel flanges.

Accessories fur WU 3 ms, apparatus of part of, round loop facility, etc. More info on request

Manufacturer: Homag, Type: Schnellwechselköpfe FK 11 / FK 13, FREE TEXT: Preis je Stck,

Manufacturer: Homag Nutsäge mit Winkelgetriebe, Type: 4-00570, Saw blade quantity: 1, Tool diameter mm: ca.160, Used: yes, Anschlussspindel mm: HSk 63, Available: sofort, FREE TEXT: HSK 63 ,

Control cabinet for roller conveyor used from stock All prices are from Station World and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire process of dismantling and loading as well as transport is carried out at the buyer's own expense and at the buyer's own ...

Manufacturer: Homag, Type: 4-00570, Tool diameter mm: ca.160, Used: yes, HSK 63: yes, Angle saw: yes, FREE TEXT: Aggregat ohne Hauben mit Tastschuh/ 9000 U/min,

Post driven tools from a Traub CNC lathe VDI 40 As well as some measuring geraete for Traub Rest according to photos Special price

Manufacturer: Sägeaggregat, Type: für CNC, Werkzeugdurchmesser mm: 180, Bohrung mm: 30, Zustand: gut, HSK 63: yes, pm: 6000,

Omschrijving Lengte mm Aantal Bovenmes H=66,5mm, R=0,8 85gr 835 2 Bovenmes H=66,5mm, R=0,8 85gr 415 2 Bovenmes H=66,5mm, R=0,8 85gr 300 1 Bovenmes H=66,5mm, R=0,8 85gr 150 1 Bovenmes H=66,5mm, R=0,8 85gr 50 1 Bovenmes H=66,5mm, R=0,8 85gr 40 1 Bovenmes H=66,5mm, R=0,8 85gr 20 1 Bovenmes H=66,5mm, R=0,8 85gr 15 2 Bovenmes H=66,5mm, R=0,8 85gr 10 1 Bovenmes H=66,5mm, R=0,8 85gr LEFT 100 1 Bovenmes H=66,5mm, R=0,8 85gr RIGHT 100 1 Ondermatrijs V10, R=0,8, 85gr 835 2 Ondermatrijs V10, R=0,8, 85gr 415 2 Ondermatrijs V10, R=0,8, 85gr 300 1 Ondermatrijs V10, R=0,8, 85gr 150 1 Ondermatrijs V10, R=0,8, 85gr 50 1 Ondermatrijs V10, R=0,8, 85gr 40 1 Ondermatrijs V10, R=0,8, 85gr 20 1 Ondermatrijs V10, R=0,8, 85gr 15 2 Ondermatrijs V10, R=0,8, 85gr 10 1 Totaal 26 Price € 2250,-- New prijs € 3250,--

6 x 50/105, right, Ø13 mm 6 x 50/105, left, Ø13 mm 8 x 60/115, right, Ø13 mm 10 x 70/125, left, Ø13 mm

Technical data: -maximum working length 1250 mm -Stand round 1050 mm -Max pressing force 80 t -Stroke 250 mm -Stand RADIUS 300 mm -Max height betw. Table - press bar 560 mm -Lifting speeds -Backward speed idle max 100 mm / sec. -Forward speed 100 mm / sec. -Backward press speed max. 12 mm / sec. -Total power 15 kW -Space requirement approx. B 1750 x H 3400 X 2000 mm -Weight approx. 8500 kg -with: - CNC - control CYBELEC DNC 7400 PSGY -controlled X - axis back gauge 5-1000 mm -Pneum. Z - axis in three stages. height-adjustable -manually movable and foldable stop fingers -controlled pneumatic die shift - hydr. Tool clamping -Manual crowning - 2 piece support arms -Pointed tool shared H 320 x L 1000 mm -Foot tool H 320 mm x L 1000 mm - universal matrix L 1000 mm

Technical data: -Pressure capacity 2000 kN -Max working width 3100 mm -Stand round 3200 mm -Stand RADIUS 300 mm -Max mounted height 965 mm -Hub, or insertion depth Steplessly adjustable 0-400 mm -Plunger speed forward + reverse per 100 mm / sec -Operating speed in 9 steps selectable 1-10 mm / sec -Drive 400 V / 26.5 kW - space requirement approx. B H 4400 x 3500 X 2200 mm -Weight approx. 18500 kg -with: - CNC - control CYBELEC ModEva 15s BJ. 2007 -Back gauge with 4 controlled pneum. on the side and height-adjustable stop fingers -controlled bending AIDS in the velocity range -Hydr. -Pneum.. Clamp of the upper tool + substation witness -mot. Crowning / hydro cushion in the table -laterally movable support arms -E - foot switch -split pointed tool R 1-100 t / m, split die

Technical data: -Get well plate surface -Length approx. 2000 mm -Width approx. 1000 mm -Height approx. 1600 mm -Top plate thickness approx. 95 mm -Top plate with internal ribbing - 4 piece t grooves on the surface of the table length 2000 mm -Centre distance of the T-slot table top 230 mm each -Table side L 2000 mm with 12 holes M27 -T - slot width approx. 40 / 67 mm -T - groove depth approx. 35 / 60 mm -Space requirement L 2200 x T 1200 x H 1600 mm - weight approx. 4980 kg

6 x 50/105, right, Ø13 mm 17.40 eur 6 x 50/105, left, Ø13 mm 17.40 eur 8 x 60/115, right, Ø13 mm 17.40 eur 10 x 70/125, left, Ø13 mm 18.00 eur

HITACHI WIRE EDM MACHINE MODEL MS 250 H-CUT 8Q X-AXIS STROKE: 1030 MM Y-AXIS STROKE: 810 MM Z-AXIS STROKE: 530 MM

2 pcs. molds with 1-1 cavity, automat with hot runnel control, PP material molds sizes both: 300x245x213 mm machine size min. 25 T

1 cavity from PP material mold sizes: 383x450x384 mm machine size min. 100 T

Used injection molding tools for the manufacture of plastic slippers. Offer total 43 pcs. refers to two cavities tooling and accessories. From small children (23) to men (45) in size, it is suitable for the manufacture of slippers of various types and colors. For sale total 12,900 Euro

Punch holder, die holder, punching tool, punch, punching die, punching punch -Matrix size: 13.7 mm -Matrix holder: for punching in the legs -Dimensions: 200/120/H90 mm -Weight: 8.7 kg

Punch holder, die holder, punching tool, punch, punching die, punching punch -Die cut size: 9 x 25 mm -Groove between punch and scraper: 5 mm -Dimensions: 200/140/H170 mm -Weight: 12 kg