We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Description: Contents consisting of various twist drills, a clamping plate (plate dimensions: 320 x 200 mm), small parts storage with contents consisting of milling cutters and power tools Attention: the SK 40 tool holders on the workbench are not included in the scope of deliveryweight approx.: 100 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 900 x 1,500 mm
used
Description: Important note: the tool holders and electrode holders on the workbench are not included in the scope of deliveryweight approx.: 100 kg, Approx. Onsite Dimension. (l x w x h): 1,500 x 700 x 900 mm
used
Description: Consisting of 2 drawer cabinets with various copper electrodes, rod electrodes, hand tools Important Note: the clamping magnets on the workbench, EROWA chuck, gauge block box and tool setting device are not included in the scope of deliveryweight approx.: 400 kg, Approx. Onsite Dimension. (l x w x h): 3,200 x 1,000 x 900 mm
used
Description: Contents consisting of various hand tools and a vice Jaw width: 125 mmweight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 1,500 x 850 x 1,200 mm
used
Description: .weight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 700 x 1,000 mm
used
Description: With back panel and a mounted vice Jaw width: 125 mmweight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 900 x 1,500 mm
used
Description: Incl. rear panelweight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 700 x 1,800 mm
used
Description: Contents consisting of various clamping systemsweight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 700 x 1,100 mm
used
Description: Contents consisting of various clamping systems Mainly from the manufacturer MECATOOL Incl. back panelweight approx.: 200 kg, Approx. Onsite Dimension. (l x w x h): 1,500 x 700 x 1,900 mm
used
Description: Contents consisting of clamping screws, a clamping system from the manufacturer EROWA Diameter: 100 mmweight approx.: 200 kg, Approx. Onsite Dimension. (l x w x h): 1,500 x 600 x 1,200 mm
used
Description: .weight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 1,500 x 700 x 900 mm
used
Description: Incl. back panel and one mounted vice Jaw width: 125 mmweight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 700 x 1,800 mm
used
Description: Incl. rear panelweight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 1,500 x 700 x 1,900 mm
used
Description: .weight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 1,500 x 700 x 900 mm
used
Description: Contents consisting of various clamping systems, mainly from the manufacturer MECATOOL Incl. back panelweight approx.: 200 kg, Approx. Onsite Dimension. (l x w x h): 1,500 x 700 x 1,900 mm
used
Description: Contents consisting of impact numbers, Allen keys, hammers, saws Incl. back panelweight approx.: 200 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 700 x 1,800 mm
used
Description: Incl. rear panelweight approx.: 200 kg, Approx. Onsite Dimension. (l x w x h): 1,500 x 600 x 1,900 mm
used
Description: Incl. a tool setting systemweight approx.: 100 kg, Approx. Onsite Dimension. (l x w x h): 1,500 x 700 x 1,700 mm
used
Description: Incl. rear panelweight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 700 x 1,800 mm
used
Description: Working bench with lightningweight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 1,500 x 200 x 2,300 mm
used
Description: Incl. mounted vice Jaw width: 125 mmweight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 1,000 x 1,700 mm
used
Description: Contains various carbide cutters, a mounted vice (jaw width: 125 mm), a calliper gauge and a small batch of electrodes Please note: the machine vice on the workbench is not included in the scope of deliveryweight approx.: 100 kg, Approx. Onsite Dimension. (l x w x h): 1,500 x 900 x 1,200 mm
used
Description: Incl. rear panelweight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 700 x 1,800 mm
used
Description: Contents consisting of a tool presetter from the manufacturer TOOL BOY, 2 gauge block boxes and a batch of various carbide milling cuttersweight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 700 x 1,000 mm
used
Description: Contents consisting of one pipe wrenchweight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 700 x 900 mm
used
Description: Contents consisting of various hand tools such as hammers, files, open-end wrenches Incl. a marking plate (dimensions: 800 x 450 mm), electrical connection and a mounted vice Jaw width: 125 mmweight approx.: 200 kg, Approx. Onsite Dimension. (l x w x h): 4,000 x 800 x 2,300 mm
used
Description: .weight approx.: 200 kg, Approx. Onsite Dimension. (l x w x h): 4,000 x 800 x 2,300 mm
used
Description: Content consisting of various hand tools such as open-end wrenches, hammers, files, eyebolts and 3 marking plates Dimensions: 800 x 440 mm Also with an attached vice Jaw width: 125 mm The workbench island consists of two assembled workbenches, each with 3 tool cabinets on one side for a total of 6 Also with electrical connection and lightingweight approx.: 600 kg, Approx. Onsite Dimension. (l x w x h): 4,000 x 1,700 x 2,300 mm
used
Description: Content consisting of open-end wrenches, hammers, screwdrivers, files, hoses, calipers Incl. 2 marking plates Dimensions: 590 x 420 mm Incl. one attached vice Jaw width: 125 mm The workbench island consists of two assembled workbenches, each with 3 tool cabinets on one side for a total of 6 Also includes electrical connection and lightingweight approx.: 600 kg, Approx. Onsite Dimension. (l x w x h): 4,000 x 1,700 x 2,300 mm
used
Description: Contents consisting of eyebolts, ejectors, twist drills, pliers, open-end wrenches, hammers The workbench island consists of two assembled workbenches, each with 3 tool cabinets on one side for a total of 6 Also with electrical connection and lighting With 2 marking plates Dimensions: 790 x 450 mmweight approx.: 600 kg, Approx. Onsite Dimension. (l x w x h): 4,000 x 1,700 x 2,300 mm
used
Description: Article is ex foundation. Dismantling, packaging and loading must be carried out by and at the expense of the customer. Collection period 23.09.2024 - 27.09.2024. Loading cannot take place without collection confirmation from SURPLEX. 3 levels Electrically height-adjustable built-in power socketweight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 1,300 x 900 x 2,300 mm
used
Description: with 2 pull-out compartmentsweight approx.: 120 kg, Approx. Onsite Dimension. (l x w x h): 1,500 x 800 x 900 mm
used
Description: With mounted vice Jaw width: 125 mmweight approx.: 200 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 900 x 1,000 mm
used
Description: .weight approx.: 100 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 730 x 900 mm
used
Description: Contents consisting of various twist drills, screw clamps and a digital caliperweight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 1,500 x 700 x 880 mm
used
Description: Workbench with substructure, vice and toolboy SK 40 Jaw wide: 125 mm Substructure with 3 drawers and content of handtools and clamping strips Workingsurface (ca.): 1.500 x 700 mm including pneumatic connection for pistol and finishing tool Transportdimensions: 1.650 x 800 x 1.100 mm, ca. 210 kgweight approx.: 210 kg, Approx. Onsite Dimension. (l x w x h): 1,650 x 800 x 1,100 mm
used
Description: Contents consisting of a magnetic stand, parallel pads, grinding wheels Important note: the vices and magnets on the workbench are not included in the scope of deliveryweight approx.: 100 kg, Approx. Onsite Dimension. (l x w x h): 1,500 x 530 x 1,000 mm
used
Description: Contents consisting of one scale from the manufacturer KERN Max. 150 kg load capacity Dimensions of the support surface: 650 x 500 mmweight approx.: 70 kg, Approx. Onsite Dimension. (l x w x h): 1,500 x 900 x 1,300 mm
used
Note: The images serve to illustrate the material. - The workbench racks are picked unassembled; - The production time is usually about 3 - 5 working days. Basic dimensions: Width: approx. 2,000 mm Height: approx. 940 mm Depth: approx. 850 mm The scope of delivery includes: 04x Square tube, used Material colour: sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drill hole spacing: 75 x 50 mm Drill hole Ø: 13 mm 02x CS Sigma Profile, used Material colour: sendzimir galvanized CS-Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 1,700 mm 02x CS Sigma Profile, used Material colour: sendzimir galvanized CS-Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 550 mm 01x Particleboard, used Chipboard thickness: 38 mm Chipboard width: ap ...
used
Description: table diameter: 1000 mmweight approx.: 1,500 kg, Approx. Onsite Dimension. (l x w x h): 1,000 x 1,500 x 950 mm
used
Description: Contents consisting of a vice (jaw width: 125 mm), a magnetic plate (plate dimensions: 140 x 40 mm), another small vice (jaw width: 40 mm) and various pliersweight approx.: 200 kg, Approx. Onsite Dimension. (l x w x h): 3,000 x 700 x 1,000 mm
used
Description: Contents consisting of a vice (jaw width: 125 mm), a measuring stand with measuring table (dimensions: 150 x 100 mm), a FESTOOL cordless screwdriver, files Important note: the height measuring device on the workbench is not included in the scope of deliveryweight approx.: 200 kg, Approx. Onsite Dimension. (l x w x h): 3,000 x 900 x 1,000 mm
used
Description: Contents consisting of a vice (jaw width: 125 mm) as well as a hand grinder from the manufacturer WORKZONE and various hand tools Important note: the measuring calipers on the workbench and the gauge block box are not included in the scope of deliveryweight approx.: 200 kg, Approx. Onsite Dimension. (l x w x h): 3,000 x 900 x 1,000 mm
used
Description: Contents consisting of various carbide cutters, copper electrodes Important note: the presetting device on the workbench is not included in the scope of deliveryweight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 1,500 x 700 x 900 mm
used
Description: Contents consisting of an SK 40 tool holder from the manufacturer CENTRICATOR, various clamping elements, parallel pads and approx. 6 SK 40 tool holders Important note: without the machine vice located on the workbenchweight approx.: 100 kg, Approx. Onsite Dimension. (l x w x h): 1,500 x 700 x 1,000 mm
used
Description: Without keyweight approx.: 250 kg, Approx. Onsite Dimension. (l x w x h): 2,080 x 820 x 1,950 mm
used
Description: -weight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 700 x 1,200 mm
used
Description: Article is ex foundation. Dismantling, packaging and loading must be carried out by and at the expense of the customer. Collection period 23.09.2024 - 27.09.2024. Loading cannot take place without collection confirmation from SURPLEX. Table top thickness approx. 50 mm , Table surface 2500 × 800 mm , LISTA drawer cabinet with 4 pull-outs, contents: pliers, screwdriver, open-end wrench, Allen key, hammer , With chairweight approx.: 140 kg, Approx. Onsite Dimension. (l x w x h): 2,500 x 900 x 870 mm
used
Description: Incl. rear panelweight approx.: 200 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 700 x 1,800 mm
used
Description: Article is ex foundation. Dismantling, packaging and loading must be carried out by and at the expense of the customer. Collection period 23.09.2024 - 27.09.2024. Loading cannot take place without collection confirmation from SURPLEX. Table top thickness approx. 50 mm , Without items on the table and other accessoriesweight approx.: 60 kg, Approx. Onsite Dimension. (l x w x h): 1,500 x 800 x 880 mm