working used for sale

Ingredient station ZS 15 Ingredient Station / Ingredient Trolley with 15 pans for ingredients top with worktop for weighing Stainless steel version mobile Used device cleaned

Hanging cabinet HS 2000 with sliding door with intermediate floor Used device cleaned Dimensions: 2000 x 400 x 600 mm, WxDxH

Work table AT 1400 with stainless steel top Work table Baker's table Stainless steel worktop with gallery at the back Bottom shelf Stainless steel version with 2 doors Approx. dimensions: 1400 x 800 x 850 mm, WxDxH Used device cleaned

Table trolley TW 800 Stainless Steel Table Trolley Worktop top Shelf at the bottom Robust design Dimensions: 800 x 600 x 990 mm, WxDxH Mobile with 2 brake rollers Used equipment / as good as new

Work table AT 4000 with beech wood top mobile Stainless steel work table AT 4000 with beech wood worktop bottom with shelf Drawer block left Dimensions: 4000 x 800 x 900 mm WxDxH Used device cleaned

Work table AT 4000 with beech wood top mobile Stainless steel work table AT 4000 with beech wood worktop bottom with shelf Drawer block left Dimensions: 4000 x 800 x 900 mm WxDxH Used device cleaned

Work table AT 1600 with stainless steel top Work table Gastro/bakery table Stainless steel worktop with gallery at the back Bottom shelf Approx. dimensions: 1600 x 600 x 780 mm, WxDxH Used device cleaned

Work table AT 1200 with stainless steel plate and sliding doors Work table Gastro bakery table Stainless steel worktop Stainless steel version with 2 sliding doors Used device as good as new

Work table AT 500 drawer cabinet Work table Gastro bakery table Stainless steel version with 3 drawers Approx. dimensions: 500 x 600 x 850 mm, WxDxH Used device as good as new

Workbench AT 1600 with stainless steel plate mobile Work table Gastro/bakery table Reinforced construction welded Approx. dimensions: 1600 x 700 x 1000 mm, WxDxH Used device

Work table AT 1880 with stainless steel top Work table Gastro/bakery table Reinforced construction welded Approx. dimensions: 1880 x 700 x 850 mm, WxDxH Used device

Work table AT 2000 with beech wood top and sliding door Work table Baker's table mobile Beech wood worktop Used device cleaned Plate sanded & re-oiled

Work table AT 2000 with beech wood top and flour trolley Work table Baker's table Beech wood worktop 3 ingredient containers on the left Stainless steel flour trolley for 100 kg Used device

Working electric cooking block stainless steel approx. 140x85x80t cm, oven SIEMENS, 4 integrated hotplates, drawer block, shelf compartment

Working platform, riser, scissor lift, aerial work platform, lifting platform, passenger lift, work basket -Manufacturer: FE Eichinger, collapsible work platform for forklifts -Type: 1073.3 1200x1.14 -Payload 250 kg -Dimensions total: 1190/1080 / H1900 mm -Transport dimensions: 1190/1080 / H310 mm -Own weight: 100 kg

Work table AT 3500 with beech wood top Dimensions: 3500 x 800 x 850 mm WxDxH Used device cleaned

IN WORKING CONDITIONS. There is no right of withdrawal.See the Auction Terms and Conditions for more information. The minimum age for visiting the viewing and collection days is 18 years. Visitors must be able to identify themselves. A forklift is available during the collection day. The maximum lifting capacity is 3 tonnes. Use of the forklift truck is entirely at your own risk. In addition, waiting times may occur. All irregularities and signs of wear may not be clearly visible on the images. It is strongly recommended that you take advantage of the viewing day to personally inspect and assess the condition and appearance of the lot. Auction-ID: A7-44605-37

Work table AT 1880 with stainless steel top mobile Baker's table with gallery at the back Reinforced construction welded Used device

Work table AT 1900 with stainless steel plate Stainless steel worktop with gallery at the back Reinforced construction welded Used device cleaned

Anti-dust mist installation, beacon, lighting, 2 extra spare brushes. Working width: 1250 mm, waste collection bin 80 liters, motor power of 700 watts, power of 6,380 m²/h. Unused. Auction-ID: A1-40237-69

Working capacity: 3,000 m² per hour, scrubbing width: 56 cm, battery working time: 3.5 hours Clean water tank capacity: 70 liters, Waste water tank capacity: 75 liters. Brush pressure: 30 kg Noise level: <65 dB dual 12V 100Ah AGM batteries. Auction-ID: A1-40237-92

General description Sapiens 1001 TFF machining center dedicated to sawing, drilling and machining components for windows/doors. Fixed gantry structure with crossbar on rigid columns. Pneumatic devices for automatic positioning of parts. Double work area with electronically controlled clamps (X1/X2). Two spindles with Y/Z axes, slewing heads and tool magazine (16+16+1). Soundproof enclosure. User-friendly interface and optimized security. Technical details Workpiece section: min 30x18 mm / max 230x140 mm Length: 300 to 2800 mm Strokes: X 4735 mm / Y 1235 mm / Z1,300 mm / Z2,405 mm Axis speed: X 120 m/min / Y 60 m/min / Z 45 m/min Pins: 10 kW + 12 kW, HSK F63, 12,000-18,000 rpm Saw blade: Ø max 450 mm, flange 140 mm Working height: 960 mm Pressure: 5 bar / Thrust: 720 N Weight: approx. 3600 kg Colours: RAL 7035 / RAL 5015 Dimensions: 5710 x 2600 x 2075 mm Included acces ...

CNC working center Brand: Comec Type: Variax J new machine The highest level of progress for your door frame production: 6 controlled axes and a fast production process characterize the Variax J. Movable machining support - All axes move on ball bearing mounted BOSCH-REXROTH or comparable linear guides - Movement / positioning of the machining units max. 70 m/min. - Axis X = 2950 mm - Axis Y = 400 mm - Axis Z = 500 mm - Axis support for vertical rotation of the machining head. axis B from -135° to +135°, motor kW 0.45. - Axis support for horizontal rotation of the machining head. Axis C from -180° to +180°, motor kW 0.45. Machining head - electrospindle 1-2 - N°1+1 electrospindle fixed to the H support - N°1 electrospindle for milling, - with 2 spindle outputs, kW 7.0 / 12-18.000 rpm, adjustable by means of frequency converter Tool attachment wit ...