Technical information: - Lateral reach: 9.1 m - Working height: 16 m - Basket dimensions LxW: 0.70 x 1.30 m - Basket rotation:180° - Load capacity: 215 kg - Propulsion: Diesel Hatz - 230V - Transport dimensions LxWxH: 6.15 x 1.80 x 2.29 m - Weight: 1990 kg

Zmg Zs0607WL 2.2mB 0.81mH 1.86Weight 1530kgWorking height 7.80mElectrically operatedYear of construction 2020Almost no operating hours!CE certificates availableFunctionalVAT identifiable

Price on request!

Comet Leopard 14 crawler platform with petrol drive and 230V power drive! Both are possible -> for indoor and outdoor use!Youtube video 2,3 and 4:

Durable construction that facilitates maintenance work under all bridges. Thanks to the solid construction, it is possible to load a large number of tools or employees on the lower part. The machine equipped with large wheels in good condition, and hydraulic brakes makes it possible to move under and work without entering the bridge. Ixkmdlnmh Possible transport in Polish and Europe, of course, by prior arrangement. Wagon under the bridge - Specially developed trolley for work under bridges - Very stable construction - Everything in the price or you get a set - The trolley is controllable and equipped with air brakes - Dimensions approx. 12 meters long without pulling, drawbar approx. 1.5m. 2.5 meters wide and 3.1 meters high

Manitou 120AETJC electric stage from 2017 with 386 hours.Test drive possible during the inspection, the operating hours will change a little.Technical data:Working height 11.95 mLoading area length 1.2 mLoading area width 0.92 mTransport length 3.74 mTransport width 1.2 mTransport height 2.16 mOwn weight 6550 kgPayload 200kgRange 7 mPeople 2max. climbing ability 25%Driving speed 6 km/hTurning radius outside 3.25 mAETJ seriesRated power of the electric motor2 x 4.50 kWElectric emergency pump3.70kWbattery48VRated battery voltage / battery capacity48Vx240AhBattery energy11 kWhIntegrated charger48V/30AThe machine can be purchased via Buy It Now or via Price Suggestion!Machine is functional so far..

Haulotte Work Platform HA 32 PX Y.O.M. 2008 Only approx. 1,050 operating hours Absolute top condition Weight approx. 22to Special price

Haulotte Compact 12 DX work platformPresenter with few hoursYear of construction 2022Operating hours: 177hRaises, lowers and drivesCE certificate available!Working height 12.06 mPlatform height 10.06 mMaximum load capacity 450 kg (3 pers.)Boom load capacity 150 kgNumber of extensions 1Platform length 2.45 mPlatform length with extension 3.7 mPlatform extension 1.2 mPlatform width 1.45 mPlatform dimensions - extended 3.7 x 1.45 mTransport height 1.7 mHeight when retracted 2.56 mWidth 1.78 mLength 3.18 mWheelbase 1.84 mGround clearance 28 cmDriving speed 0.6 - 5.5 km/hCan be moved at a maximum height of up to 8.15 mMaximum climbing ability 40%Inclinometer 3 °Raising and lowering time 35 s / 51 sTurning radius - outside 3.5 mTires - foam filled 26 x 12 - 16.5Engine Kubota, 18.5 kW (Stage 5 in EU)Hydraulic oil tank capacity 75 lTotal weight 3965 kgMachine works well!

Used scissor lift Int. Art. Ref. m3459 Manufacturer: Haulotte Type Compact 8 Year of construction 2007 Batteries approx. 1.5 years old Dimensions (L x W x H): 250 x 80 x 200 cm Weight: 1.730 KG Operating hours: approx. 380 h Propulsion: Electric Platform height: 6.2 meters Working height: 8.2 meter Platform dimensions: 230x80 cm Expandable platform: 92 cm Max. platform load: 350 KG With intergr. Charger Location: 59425 Unna The machine can be viewed and tried out. We will be happy to send you more photos by e-mail. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge  ...

trailer work platform Sagafirst TBL 16A with a working height of almost 18m.Driven electrically via batteries or via a petrol engine.Tire drive available and rotating work basket!Year of construction 2023Load capacity 230kgAlko brake system!No Austrian approval -> individual approval required!CE paper available!

Spring promotion In stock!Genie GS-3246 E-Drive from 2023 NEW!Working height: 11.78m, platform height: 9.78mPlatform length: 2.26mPlatform length extended: 3.18mLength: 2.44m Width: 1.16mOwn weight: 2,367kgLoad capacity: 318kgMax. people: inside 2 p outside 1 p.Two-wheel front wheel drive 24V(4x6V)Non-marking solid rubber tires

Manitou 160 ATJ+ with 400kg load capacityYear of construction 2019Operating hours 1560 h230V generator available on the machine!Serial number: MAN00000C01033305Working height 15.80mTransport length 4.90mWidth 2.45mHeight 2.37mWeight 8100KgKubota engine 46hpCE certificate available!Youtube Link: 

Haulotte HA16RTJ PRO!Year of construction 2018Operating hours 1028 hCE certificate available!TOP machine with pendulum axle, endless rotation of the upper carriage and 4 wheel steeringWorking height 16 mPlatform height 14 mMaximum range 8.3 mArticulation point 7.65 mMaximum load capacity 230 kg (2 pers.)Platform dimensions 1.83 x 0.80 mLength in basic position 6.75 mWidth 2.3 mHeight when retracted 2.3 mVertical swivel range of the basket arm 140° (- 80° / + 60°)Platform swivel range 165° (- 75° / + 90°)Swivel range of the superstructure 360° continuousOverhang 10 cmWheelbase 2.1 mGround clearance 37 cmInclination 5°Driving speed 5.2 km/hMaximum climbing ability 40%Turning radius - outside 3.75 mMotor Kubota 18.5 kW (Stage 5 in EU)Total weight 6,540 kgTransport length 5.05 mTransport height 2.4 mOff-road tires made of solid material 830 x 285 mmMaximum wind speed 45 km/hMachine d ...

Year of construction 2007, max. working height 7.79 m, 227 kg platform load capacity, 0.81 m machine width, 1.83 m machine length, 1503 kg dead weight

Year of construction 2012, 885 h, working height: 9.75 m, platform dimensions: L x W: 2.30 x 0.76 m, 2200 kg dead weight, 230 kg payload

Working height 11 m, working range 6.8 m, load capacity 230 kg, 350° swivel radius, with additional knuckle boom on the work basket 180°, jib vertical working range 144°, total width 122 cm, transport height 201 cm, transport length 574 cm, machine weight 7100 kg

Skyjack SJ III 3219 electric scissor work platform, Year of manufacture 2003, With new batteries,, Working height 8m, 84cm width, 232cm length

bore capacity in steel (diameter): 32 mmthroat: 257 mmbore stroke: 115 mmboring spindle: MK 4 boring chuck: 16 mmbore depth: 120 mmtable surface area: 475 x 425 mmcolumn diameter: 92 mmtotal power requirement: 1,1 kWweight of the machine ca.: 0,135 tdimensions of the machine ca.: 0,75 x 0,85 x 1,72 mSturdy bench drill with- Keyless chuck- Drilling depth setting- emergency stop- Rotatable table topThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 700 mmy-travel: 400 mmz-travel: 330 mmControl: FANUC 31iB5 table-size: 850 x 410 mm: 21 fachturning speeds: 10.000 U/minInternal cooling system: 20 bartotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 400 mmy-travel: 450 mmz-travel: 35 mmControl: Heidenhein TNC 530 table weight: 200 Kg: Random 36 fachtool adaptor: HSK E40 turning speeds: 30.000 U/mintotal power requirement: kWweight of the machine ca.: 7500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 400 mmy-travel: 240 mmz-travel: 350 mmb-axis: +/-110 °number of tools: 68 table:: EROWA ITS 148 table weight: 200 KgControl: HEIDENHAIN TNC 530 c-axis: 360 °rapid traverse: 80 m/mintool adaptor: HSK E40 Internal cooling system: 18-70 barweight of the machine ca.: 9 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 620 mmy-travel: 520 mmz-travel: 460 mmControl: iTNC 530 b-axis: -50+110 °c-axis: 360 °table weight: 300 Kgspindle drive: 20 kWspindle turning speed - stepless: 12.000 U/minTool adapter: SK - 40 rapid traverse: 36.000 m/mintable diameter: 620 mmTools changer: 48 fach/toolsInternal cooling system: 20 barchip conveyor: Inkltotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mmy-travel: 400 mmz-travel: 330 mmControl: FANUC 31i-B5 Tools changer: 14 pos.table-size: 850 x 410 mmnumber of spindle speeds: 24.000 U/min/rpmrapid traverse feeds: 48 m/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 650 mmy-travel: 650 mmz-travel: 550 mmControl: HEIDENHAIN iTNC 530 tool change unit: 60 pos.table diameter: 600 mma-axis: +91/-120 °c-axis: 360 °number of spindle speeds: 20.000 U/min/rpmtool adaptor: HSK-A63 spindle drive: 39 kWInternal cooling system: 18 - 70 barchip conveyor: kWtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 700 mmy-travel: 590 mmz-travel: 480 mmControl: HEIDENHAIN ITNC 530 a-axis: +-110,0. 001º °c-axis: 360, 0.001 °rapid travel x/y/z: 32.000 mm/minTools changer: 30 pos.max. workpiece length: 280 mmmax. workpiece weight: 7 kgchip conveyor: Inkl. kWInternal cooling system: 20 barhandwheel: HEIDENHAIN HR 310 Machine on: 13.975 hSpindle hours: 6.258 htotal power requirement: 30 KVAweight of the machine ca.: 8,2 tdimensions of the machine ca.: 2.220 x 2.650 x 2.855 mm-pallets 3 Working Tables / PalletsTable 1 Size Ø280 mm.Table 2 Size Ø 500 mm.Table 3 Size 600x400 mm.Max weight allowed on table 265 kgMin-max distance over table 150-760 mm.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mmy-travel: 400 mmz-travel: 400 mmtaper: BT 40 Internal cooling system: 7 barsize of pallet: 750 x 450 mmnumber of spindle speeds: 12.000 U/min/rpmSpindle power: 15 kwTools changer: 40 fach/toolscontrol: MAPPS III The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 3.000 mmy-travel: 2.500 mmz-travel: 2.475 mmw-axis: 800 mmrotary table: Juaristi MG-12 Rotary table surface: 2.000 x 2.500 mmT-slots: 11 T-slot - width: 170 mmtable weight: 8.000 Kgtable rotation: B- Achse – 0,001 °Control: HEIDENHAIN i TNC-530 diameter of quill: 130 mmspeed: 3.000 U/mintool taper: ISO 50 DIN 69871/1-B milling head: swivelling +/-: 2,5/2,5 Gradspindle drive: 30 kWtransmission ratio: 2 speeds:: 0-2.500 U/minboring spindle: D`ANDREA UT5-800-S mm/mindiameter: 800 mmcross travel: 250 mmTools changer: 30 pos.Internal cooling system: 20 barChip coveyor: Inkl. handwheel: HEIDENHAIN HR-420 weight of the machine ca.: 45 tdimensions of the machine ca.: 9800 x 7320 x 5500 m-TS-3 head, TS-5 column andlongitudinal bed INCLUDED:- Part touch probe RENISHAW RMP-60- External coolant- 20 bar Internal coolan- protecting guards- mobile operator platform for controlpanel- C ...

; Gross weight [kg]: 2170; Inspection Date: 2024-04-19; Amount of previous owners: 1; Maximum lift capacity [kg]: 220

; Mileage [km]: 15022; Gross weight [kg]: 3500; Inspection Date: 2024-04-15; Amount of previous owners: 1; Maximum lift capacity [kg]: 250

; Gross weight [kg]: 3500; Inspection Date: 2024-04-15; Amount of previous owners: 1; Maximum lift capacity [kg]: 200