work used for sale

The cable granulating system RMH 2D grinds cable with different dimensions (for example household installation cable, industrial cable) and then separates the metal and plastic fraction on the dry cutting table. The material between a high-speed rotor blades and the blades of the stator is open-minded when the cable in the granulator. Is at the same time the cable is crushed and peeled off the plastic coating or plastic coating.   When the separation on the dry cutting table, the ground copper-plastic mixing group is applied evenly on the inclined work screen. The vibration of the work screen and the smooth air flow enables the mixed fraction into a flowing State. This fall the specifically heavier particles (copper) on the sieve and the specific smaller particles (plastic) swimming. The heavier particles (copper) are promoted through the support movement of the work screen slowly  ...

Technical data: -maximum cutting force 300 kN -maximum punching diameter up to 88.9 mm -Max that material thickness 6.35 mm -Work area without putting up 1000 x 2000 mm -Actual workspace 1145 x 2100 mm -Work area normally with putting 1000 x 4000 mm -Size work table 1000 x 3500 mm -maximum working speeds of the axes 50 m / min -Max stroke sequence. 320 strokes/min -2 collets min. / max. distance 160-1900 mm -Need for compressed air 6 bar -Power supply 400 V / 15 kW -Space B 4200 x T H 3800 x 2250 mm -Weight approx. 6500 kg -with:-tool station 360-degree rotatable programmable 0.01 ° -CNC control - div. accessories in the separate tool Cabinet

Ideal CSR Typ. 201 - 21 wire mesh production line CSR Project Jig welding machine Year of manufacture 1996 Switch / control cabinet kVa125 Made in Germany Control: W/Siemens Handheld Computer Control Mounted In Enclosed Wire Cage Safety Structure The coordinate welding machine CSR 201 is used for resisting point welding of sheet metal and wire products in stencils: Work-piece dimensions: Length max.1800 mm Width max. 750 mm Nldw7 Height max. 200 mm X-axis for driving the welding unit according to the work piece length, with a base frame, hardened liner guides, serrated toothed rack system and servomotor with incremental encoder, travel max. 1800mm programmable, max. Travel speed 1500 mm / s Positioning accuracy +/- 0.2mm Y axis for driving the welding unit according to work piece width, with hardened linear guides, rack system and rotary servo motor with incremental ...

Manufactured by Ryazan plant (Russia) Max. work piece diameter, mm 800 Max. work piece diameter above support, mm 450 Max. work piece length, mm 2800

Microbiological protection and PCR cabinet with vertical air flow General characteristics Vertical hood with laminar flow, Class 100 is used for handling different samples in a sterile environment without turbulence and without impurities in the working room. Protects the work area both against microorganisms and other air contaminants, chemically toxic vapors and unpleasant odors, .. etc. Automatic electronic monitoring system controls all functions and all safety alarms of the system according to EU norms offers many working possibilities: 1) Overpressure system: part of the sterile air is evacuated through the front opening. 2) Pressure lowering system: part of the filtered air is evacuated while the outside air is partially brought inside creating a protective barrier without affecting the laminar flow. Protection of personnel and the environment, but can also be used for work ...

platform diameter: 1450 mm (HYDRAULIC - hydraulic spindle) maximum diameter of the piece: 1650 mm maximum height of the piece under the crossbar: 1200 mm - under tool holder: 1000 mm maximum workpiece weight: 11000 Kg mobile crossbar running on the plinth: 900 mm fast movement speed: 400 mm/min. slow displacement speed: 100 mm/min positioning accuracy on the base: +/- 0.1/100 mm main drive engine power: 60 KW platform advancement range: 2-280 rot/min number steps speed change box 3 work support stroke (X-axis): 1542 mm vertical stroke work support sled (Z-axis): 1200 mm sled section: 250x250 mm Milling shaft cone: ISO 50 milling engine power: 22 KW milling shaft speed range: 20-2000 rot/min X-Z axis work feed range: 1-4000 rot/min fast forward: 6000 rot/min C axis feed (slow-regimo milling rotation): 1-360 °/min X, Z, C: 45 N ...

Holzkraft Precision Wood Band Saw HBS 533 SET Product name: Precision wood band saw HBS 533 SET Manufacturer: Holzkraft Item number: 5155303 SET Year of construction: 01/2022 Condition: As good as new technical details: • Dimensions work table (L x W x H): 535 mm x 535 mm x 945 mm • Saw table inclination: -10° to +45° • 2 x suction nozzles • Diameter suction nozzle: 2 x 120 mm • Working table length max.: 685 mm • Work table widening length: 535 mm • Work table widening width: 150 mm • Cutting height max. 90°: 270 mm • Cutting width max. with stop: 474 mm • Cutting width max. without stop: 514 mm • Band saw blade speeds: 850/430 m/min • Band saw length: 3,865 mm • Band saw guide: precision guide at the top and bottom • Weight: approx. 163 kg • incl. band saw set, length 3865 mm, 3 pieces - 1x band saw blade wood 3865 x 10 x 0.5  ...

max. wheel diameter: 80 mm gear width: 150 mm max. module: 2,5 min. module: total power requirement: 10 kW weight of the machine ca.: 2400 kg M I K R O N (Switzerland) Fully Automatic Gear Hobber for Worm Gears Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15 ____________________________________________________________ max. gear- without feed magazine approx. 80 mm max. gear- with feed magazine approx. 50 mm Module max. 2, / 2,5 Axial milling length approx. 150 mm max. workpiece-mounting length approx. 200 mm Milling slide can be swivelled up to 90 degrees Milling cutter - 24 - 50/63 mm Max. radial distance of milling slide 0-14/18 mm Milling cutter adjustment max. 25 mm Milling cutter speed 212 - 2.000 rpm Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation radial infinitely adjustable 0,2 - 200 mm/min.  ...

cutting diameter: 330 mm saw band length: 3870 x 34 x 1,1 mm cutting width: 400 mm band speed: 15 - 90 m/min : 400 x 200 mm cutting capacity - round: 330 bei 90° mm : 250 x 170 mm cutting capacity - round: 250 bei 45° mm work height max.: 940 mm cutting capacity - square: 320 bei 90° mm cutting capacity - square: 230 mm total power requirement: 3,0 kW weight of the machine ca.: 665 kg dimensions of the machine ca.: 2660 x 204 x 2060 mm Description: The ARG 330 F. is a robust manual metal band saw with high cutting accuracy for medium to heavy workpieces! Your exceptionally compact design, as well as its massive saw frame made of gray cast iron are ideally suited for use in workshops and production facilities. The The basic equipment of the machine enables the processing of a wide variety of different materials, including stainless and tool steels. With With this machine, miter cuts ar ...

VISION WIDE VB-2016 5-AXIS CNC gantry milling machine was manufactured in 2013 in Taiwan. The machine performs precision machining of heavy workpieces in three or even five axes, once the automatic swivel head is mounted to the vertical spindle. The machine’s top-quality cast-iron structure is rigid and resistant to bending stress, thus perfectly dampening the vibrations and oscillations generated during machining. The VISION WIDE VTEC VB 2016 CNC gantry milling machine centre is equipped with safety guards fitted around the entire machine with sliding doors that open flush with the X-axis travel. Inside, there is a large work table with a length of 2000 mm and a width of 1300 mm, which is supported along the entire length of the longitudinal travel and guided by two sliding guideways, making it possible to machine heavy workpieces even when the table is unevenly loaded. Two scre ...

sheet width: 1050 mm plate thickness: 2,0 mm distance between columns: 1050 mm down holder: 1 Stück fence: Tisch 80 - 480 mm fence: Breiten 0 - 600 mm table-size: 1300 x 600 mm work height max.: 760 mm total power requirement: manuell kW weight of the machine ca.: 413 kg. range L-W-H: 2,0 x 1,04 x 1,6 m - Including adjustable stop on the work table for miter cuts - The knife can be lifted easily thanks to the counterweight on the back - Large work table for safe placement of the sheet metal plates - Sheets can be pushed through, i.e. longer sheets can be cut - Handwheel on the front to adjust the back gauge - Comes with a robust cast iron base as standard - Long service life thanks to knives made of quality steel - Standard with hold-down device including quick-release clamp - Robust machine construction for high stability Furnishing: - manual lever shears - stable execution - hold-down ...

: 3,0 mm ST 40 : 2,0 mm VA : 90° Grad blade length: 130 x 130 mm table:: 600 x 460 mm work height max.: 900 mm engine output: pneumatisch weight: 170 kg range L-W-H: 630 x 660 x 1270 mm Characteristics : - Notching with a burr-free cut, without deforming the cut edges - Machine body made of high-quality gray cast iron, base frame made of sheet steel - Cutting knife made of surface-hardened tool steel - Effort-saving work thanks to the pneumatic drive - Operation by means of a foot pedal, so both hands are free for the workpiece - Large work table with integrated scales - T-slots for precise guidance of the swiveling stops - Protective cover in front of the cutting knife for high security scope of delivery - 1 set of cutting knives - 2 swiveling material stops - Plexiglass protective cover - foot pedal - angle gauge - underframe The data for this ad was created with ModulMWS - the sof ...

Engine lathe NILES DP1/S3 Year of manufacture: 1988 Manufacturer: NILES Made in Germany Machine is almost not used, complete Technical Data: Height of center over bed: 800mm Max. processing diameter over bed: 1.600mm Max. processing diameter over support:1.250mm Min. work-piece diameter: 250mm Max. work-piece weight: 40.000kg Max. work-piece diameter: 1.250mm Internal spindle cone (1:10): 120mm Range of longitudinal support feeds: -1st row (stepless adjustment): 1-200mm/min -2st row (stepless adjustment): 36-3600mm/min Range od feeds of transversal slides: -1st row (stepless adjustment): 0,4-80mm/min -2st row (stepless adjustment): 14,4-1440mm/min Range of feeds of cross slides: -1st row (stepless adjustment): 0,12-25mm/min -2st row (stepless adjustment): 4,5-450mm/min Length of travel: -Of transversal slides: 760mm -Of cross slides: 500mm -Of incisive ca ...

x-travel: 710 mm y-travel: 500 mm z-travel: 500 mm total power requirement: 24 kW weight of the machine ca.: 7 t dimensions of the machine ca.: m M I K R O N (Switzerland) CNC Controlled Universal Milling Machine with Tool Changer Model WF 54 VH CNC Year 1991 Serial No. 5110302 ________________________________________________________ Table travel, X axis, longitudinal 710 mm Table travel, Z axis, vertical 500 mm Milling head travel, Y axis, cross 500 mm Mounting height below vertical spindle, approx. 600 mm NC rotary table 800 mm Resolution of rotary table, C axis 0.001 ° Spindle taper SK 40 Spindle speeds, 3 steps, infinitely variable 10 - 6,300 rpm Feeds, XYZ 2 - 4,000 mm/min Quickfeed, XY 10,000 mm/min Quickfeed, Z 8,000 mm/min Spindle drive, approx. 15 kW Total electrical load, approx. 24 kW - 380 V - 50 Hz Weight, approx. 7,000 kg Accessories / Special Feat ...

Workpiece diameter: 0 mm Workpiece length: 0 mm Table diameter: 0 mm Lapping machine type: 0   CNC Brand: 0 CNC Model: 0 Technical data Face plate diameter: 610 mm Max. work piece diameter: 216 mm Number of carriers: 5 Carrier Root diameter: 224 mm Maximum part down pressure: 317.5 kg Execution: two wheels Voltage 50 Hz 3x: 380 Volt Air connect: 5 bar Motor capacity: Main motor: 4 kW work-piece mechanism: 1.5 kW Machine´s weight about: 1900 kg Overall dimensions machine: Length: 1650 mm Width: 1150 mm Height: 2400 mm Description: The Lapmaster two-disc lapping and polishing machines of the LSP series are so-called "4 way" machines. machines, i.e. in addition to the centre wheel and the external the upper and lower lapping wheels also rotate. lower lapping wheel also rotate. A highly developed control system enables the optimal optimal movement of the workpieces for the lapping la ...

SPK KB 2132 eccentric press was manufactured in the USSR in 1980. Operating with a force of 160 tonnes, the press of almost indestructible design offers the highest quality and precision during the most demanding workpiece machining. The machine’s equipment includes among others a pneumatic clutch, a large-area slider performing up to 71 strokes per minute, central lubrication and manual control. The total weight of the press is 13200 kg. Technical data of the SPK KB 2132 press - maximum press force: 160 t - work table dimensions (L x W): 1000 x 700 mm - maximum slider stroke: 160 mm - minimum slider stroke: 25 mm - slider dimensions (L x W): 580 x 460 mm - slider adjustment range: 120 mm - slider stroke rate: 71/min - intermediate plate thickness: 110 mm - distance between work table and slider (slider in lower position, largest stroke, connector unscrewed): 480 mm - bore ...

Set of 2 motorized tables designed for the packaging or handling of food products (preserves). Built in 3-4.5mm AISAI-304 stainless steel. The characteristics of the tables are as follows: each table consists of two stainless steel work areas measuring 500mm wide x 7000mm long, a lower ribbon and an upper Intralox blue 450mm wide x 7000mm long and two intermediate ribbons one on each side of the table with appointment Intralox blue measures 220mm wide x 7000mm long. Each belt can be adjusted speed independently. The control panel made of stainless steel AISAI-304 1.5mm, IP65. External measurements of each table 7000mm long x 1560mm wide x 1120mm high, table height 720mm is to develop the work sitting on stools. It includes stools built in stainless steel and approved for work in food. Capacity of workstations is: 7 people on each side of table x 4 sides = 28 people.

Technical data Work-piece diameter: 5 - 50 mm Max. work-piece height: 1 - 70 mm Arrangement: bilateral (above, below) Grinding wheel: outside diameter: 457 mm inside diameter: 76.2 mm Width / height: 75 mm Grinding wheel speeds: from: 251 rpm up to: 1254 rpm from: 6 - 30 m/s Speed of the work-piece driving plate: from: 21.8 rpm up to: 215 rpm Voltage: 380 Volt Grinding motor power: 2 x 30 kW Total installed power: 35 kW Machine´s weight about: 4000 kg Overall dimensions machine: Length: 2450 mm Width: 1100 mm Height: 2700 mm Various accessories: Measuring instrument: IONIC

Grinding area: X-axis grinding length: 1,000 mm Z-axis grinding width: 400 mm Y-axis grinding height : with smartLine Basic (grinding wheel D = 300 mm) 500 mm on the work table/with smartLine Kombi (grinding wheel D = 400 mm) 500/700/950 mm on the work table - 420/620/870 mm on magnetic plate Table load: 750 kg on the work table/525 kg on magnetic plate Drive element: ball screw Drive motor: AC servo motor, adjustable Measuring system: absolute, rotary encoder Resolution: 0.001 mm Travel path: 1,190 mm Feed: 0.01 - 30 m / min Grinding path adjustment: via setting buttons on the control panel (xpressCube / -Pro) or direct value entry (840D) Machine control: Siemens 840D sl Main machine dimensions (standard version): Width: 4,100 mm Depth: 2,250 mm Height: 2,350 mm (2,650 / 3,050 mm with Smart N Kombi) Machine weight: approx. 5,400 kg

MORI SEIKI NT6600 CNC INTEGRATED MILL TURN CENTER WITH LIVE MILLING MAXIMUM SWING OVER BED: 42" MAXIMUM WORK PIECE DIAMETER: 42" MAXIMUM WORK PIECE LENGTH: 239" MAXIMUM BAR DIAMETER: 6.4" SPINDLE BORE: 7" X AXIS TRAVEL: 41" Y AXIS TRAVEL: 26" Z AXIS TRAVEL: 242" B AXIS: +/- 120 DEG. MAIN SPINDLE SPEED: 1500 RPM MAIN SPINDLE MOTOR: 40 HP MILLING SPINDLE SPEED: 8000 RPM MILLING SPINDLE MOTOR: 40 HP ELECTRICS: 220V/3P/60Hz/216A OAD (APPROXIMATE): 490" X 182" X 169" HIGH WEIGHT (APPROXIMATE): 120,560 LBS. EQUIPPED WITH: C AXIS YAXIS B AXIS LIVE TOOLING/MILLING 20" CHUCK FS-31iA5 CNC CONTROL 140 POSITION AUTOMATIC TOOL CHANGER PROGRAMMABLE TAILSTOCK COOLANT THROUGH SPINDLE (HIGH PRESSURE) CHIP CONVEYOR Additional Control Options: Automatic Power Shut-Off MAPPS 4 System Part Program Storage: 8mb Stored Programs: 1000 Remote Communication Function ATA Flash M ...

GeneralMilling Specification; Control: Control M730UM with CELOS CharacteristicsMax machining diameter278 mmDimensions (L x W x H)2,82 x 2,09 x 2,15 mDrive power tool spindle5,5/5,5/3,7 kWDrive power main spindle11/15/15 kWRapid feed X / Z30/30 m/minInput precision of C-axis on Mainspindle0,001 degreeMovements X / Z260/590 mmRotary tool spindle speed10000 rpmNumber of tool stations12 Speed max.6000 rpmBar diameter max.52 mmSwing- Ø, max.755 mmMax. Turning Length192 mmWeight approx.4900 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and pHigh-output spindle (Left Spindle) 15/ 11 kW, 6,000 min-1(Left Spindle) High-Output Spindle 15/11 kW (20/15 HP), 6,000 min-1 The NLX ...

GeneralCNC Turning Centre with C axis and tool drive; Control: Control M730UM with CELOS CharacteristicsMax machining diameter356 mmDimensions (L x W x H)2,82 x 2,09 x 2,15 mDrive power tool spindle5,5/5,5/3,7 kWDrive power main spindle15/22/22 kWRapid feed X / Z30/30 m/minInput precision of C-axis on Mainspindle0,001 degreeMovements X / Z260/590 mmRotary tool spindle speed10000 rpmNumber of tool stations12 Speed max.-5000 rpmBar diameter max.65 mmSwing- Ø, max.755 mmMax. Turning Length510 mmWeight approx.5000 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and pHigh-output spindle (spindle 1) 22/ 15 kW, 5,000 min-1The NLX 2000 adopts a highly reliable main spindle de ...

GeneralUniversal Machining Centre Vertical headstock Tool change system double gripper NC-Swivel rotary table with pallet carrier 3 pallets 500 mm x 500 mm / 19.7 in x 19.7 in T-slots according to DIN 55201-A2 linear pallet changer coolant tank 500 l / 132 gallon chip conveyor with netting band filter integrated, coolant ring jet; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minWorking area 1Longitudinal735 mmCross650 mmVertical560 mmFloor space/WeightWeight approx.18300 KgDirect measuring systemDirect path measuring systemCabineFull protection cabinNC swivel rotary table with pallet carrierTable surface 500 x 500 mmCentre bore 50 mmMaximum load (table centre) 500 KgMotor spindle 20,000 rpmMotor spindle speedMASTER® HSK-A 63 Spindle speed 20 - 20,000  ...

TECHNICAL DATA SHEET CNC – Travelling column milling machine Make PARPAS Type SHARK One Control HEIDENHAIN iTNC 530 HSCI Year of construction 2016 Travel Longitudinal movement (X-axis) 3,500 mm Transverse movement (Y-axis) 1,083 mm Vertical movement (Z-axis) 1,074 mm Clamping table Clamping surface 4,000 x 1,000 mm Threaded holes with fitting seat Feeds X-, Y- and Z-axis, infinitely variable 2 - 30,000 mm/min. Rapid traverses in X / Y / Z 30 m/min feed force of the axes 10,000 N 2-axis milling head 2-axis milling head TUB-E92 with drive viaTorque motors for 5-axis simultaneous machining Power at 100 % ED 29 kW Speed range, infinitely variable 0-18,000 min-1 torque 92 Nm Rotational speed axis A/C 60 min-1 Tool holder HSK 63A – DIN 69893 Clamping force A-, C-axis 2,300/4,000 Nm Automatic tool changer ATC Tool stations 30 places  ...

Fully European, professional workshop electric press with a pressure of 100t. Made of the highest quality steel, it ensures maximum precision of work during manual or automatic operation. The press has two speeds of operation - the piston at idle (without load) descends very quickly to the workpiece - while when a load is detected, the pump automatically switches to the working mode - slower and precise. Equipped with an adjustable work table and an electric pump. Precision is ensured by a robust hydraulic system and perfectly balanced, robust components. Viber-System workshop electric presses are a must-have in every professional workshop that appreciates precise and fast work. Model Specification WP100HPRK: Model: WP100HPRK Press force: 100 tons Max. pressure 320 bar Piston stroke: 400mm Oil tank capacity: 27l No-load speed (idle): 16mm/sec Piston return speed: ...

GeneralTwo spindle turning centre with - partial hollow clamping device for main spindle and counter spindle internal diameter of draw tube Ø67 mm (2.63 in) x 700 mm (27.55 in) deep - 2 C-axes and spindle brakes (hydr.) - 2 12 fold Sauter star turrets reception VDI 40, DIN 69880-40 with precision interface (Trifix) and tool drive connection/drive acc. DIN 5480 - Y-axis, slide I - Counter spindle slide with NC-cross stroke and tailstock; Control: CELOS with Siemens 840D sl Operate Headstock, leftClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle diametre on front bearing130 mmSpindle bore87 mmDrive power (100% DC)25 kWTorque (100% DC)280 NmC-Axis Speed2000 rpmSpeed range0-5000 rpmHeadstock, rightClamping chuck Ø315 mmSpindle bore87 mmSpindle nose diameter170h5 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWC-Axis Speed2000 rpmTorque (100% DC)280 NmS ...

Wood power KSO 150F Edge Grinder Grinding unit can be swivelled up to 45° via lever The machine stand made of welded steel guarantees high torsional stiffness and vibration-free operation. Oscillating sanding belt with separate gear motor for better grinding results Oscillation optionally switchable Abrasive sole with graphite coating for a longer service life of the sanding belt Height-adjustable grinding table for utilization of the entire sanding belt width Height-adjustable additional table with suction for grinding radii The spring-loaded belt tension automatically compensates for belt length differences. With double suction Extendable roller table widening With rubberized grinding roller Veneer edge grinding device with contact shoe with fine adjustment, relief rollers and stop rulers With grooved inlet ruler for veneer protrusions Quick changeover from veneer edg ...

TRUMPF TruLaser Cell 7040 3D laser built in 2015 in Germany is the ideal solution for versatile cutting, welding and laser metal deposition (LMD). For all these tasks, the TRUMPF 3D laser cutting machine uses the TruDisk 4001 semiconductor laser and a specially designed 3D head with 5 axes, which can machine not only flat workpieces, but also tubes, closed profiles and very complex shapes. All of this makes this extremely technically advanced machine capable of tackling any challenge in the broad field of automotive engineering. The workpiece placed on one of two work tables is machined by an extremely stable laser beam with a power of up to 4 kW. During machining, the head moves in the three-dimensional cartesian coordinate system and rotates in two axes in the polar coordinate system. This is what gives the universal 3D laser its extraordinary quality and precision, impossible to ac ...

I sell a 4-axis CNC machining center Biesse Rover 24L with truss table Year of construction 2004. Configuration: 4-axis main spindle HSD freshly fully repaired / Water-cooled RS1600 Tool magazine 7 positions ISO30 on the head 1x groove saw X-direction Drill head 14+4+2 drilling spindle Usable work surface 4500x1330mm. 2 work surfaces, 4 clamping zones Automatic system of Central Lubrikazion Combined power 35kW XDNC 2.01 software with operating instructions. Pump Becker 250/300 m3/h. 5,5KW Additional vacuum for stencil work or additional clamping devices. Good condition. Available from stock. Need for repair: handles on the truss table, Rotazion from ISO30 magazine on the head

Description 0043-664-2803850 Specifications: Cutting depth 85 - 165 mm Cutting depth at 45° 60-116.5 mm Cutting depth at 60° 42-82.5 mm Swivel range 0 - 60° Idle speed 1500-1800 1/min Rated power 2,800 W Weight 15.3 kg Suction connection 58mm Description: The carpentry hand saw with exceptional weight/performance ratio! This is only possible through the use of state-of-the-art magnesium die-cast alloys. Swivelling up to 60°, this makes the hand-held circular saws a universal partner. The easy-to-read scale on the rotary wheel of the cutting depth adjustment makes the work easier and saves annoying remeasurement. For optimal handling and better control, the carpentry circular saw is equipped with soft start, constant speed under load, speed reduction and overload protection. The easy-to-use stop system of the MKS and the adjustable suction nozzle make your work m ...

PLASOMAT PMS 63 CP eccentric press was manufactured in Poland. In order to meet all production requirements, the machine features a large area slider with the possibility of adjusting the height and number of strokes in the control cabinet. In addition, a stable, deformation-resistant monolithic structure combined with a high pressing force of 63 tonnes ensures the highest accuracy and precision in machining. All this makes the PMS 63 CP press the ideal choice for both small batch and high volume production. The offer includes additional equipment, consisting of among others 8 anti-vibration pads and an intermediate table. Technical specifications of the PLASOMAT PMS 63 CP press - maximum press force: 63 t (630 kN) - work table dimensions (L x W): 800 x 560 mm - number of slider strokes: 65-85/min - maximum slider stroke: 110 mm - minimum slider stroke: 8 mm - slider adjustment: ...

Work Center With Rotating Table Work Area: 630 X 560 X 560 (Max Stroke) Rotating table: Ø 600 Capacity: 350 Kg Max Work Feed: 10000 mm/min Max Rapid Feed: 20000 mm/min Accessories: Electrospindle Max RPM: 12000 Control: Heidenhain Tnc 42

ZAKMET HYPERZAKMET 6000X2500 plasma cutting machine was built in 2008 in Poland. The machine is used to cut pre-programmed shapes in details having a maximum thickness of 38 mm (carbon steel) or 20 mm (aluminium and stainless steel). A powerful HYPERTHERM HyPerformance HPR 130 laser source with a power of 130 A is used for the cutting process, allowing extremely precise and accurate machining to be achieved. The plasma cutting machine has a solidly built work table with a length of 6000 mm and a width of 2500 mm, which can be extended by means of an additional control panel. The plasma cutting machine is also equipped with FASTCAM CAD/CAM software for simple and effective programming of the cut shapes, and a modern HYPERTHERM EDGE CNC controller, which allows for full control of the machine. Characteristics of the ZAKMET HYPERZAKMET 6000X2500 plasma cutting machine - working area  ...

Very rare to see a G90 on the market ! This Probat with a 90kg capacity per batch has been manufactured in 1967 and refurbished by Giesen in 2010, since then it continued to run like a workhorse until a couple year ago when it was replaced by a new machine. It is now ready to ship and to work. The setup includes a destoner and a green coffee loader. Computer connection to work with Artisan or Cropster The propane gas burner is connected to a thermoregulator allowing to reach various set temperatures in a defined time but you can also work manually by activating the burner at 1/3, 2/3 or 3/3 of its full power. This fantastic roaster has always worked great and it has been maintained every year by a Probat agent. It hasn't lost more than 200ml of gear oil in the last 8 years of use. If you are not familiar with this particular type of investment, please note that it do ...

BYSTRONIC Byspeed 3015 laser cutting machine was built in Switzerland in 2004. The machine equipped with an extremely reliable BYSTRONIC Bylaser 4400 laser source with a power of 4.4 kW, performs the cutting and engraving process on workpieces with a maximum thickness of 25 mm (structural steel), 20 mm (stainless steel), 12 mm (aluminium) and 3 mm (brass, copper, titanium). Workpiece machining is performed on a large work table with a length of 3000 and a width of 1500 mm, allowing free access to the laser’s work area and for loading larger-size sheets weighing up to 890 kg. The control panel with BYSTRONIC ByVision CNC controller for programming the machining parameters has been placed on the arm to increase the machine operator’s comfort. Characteristics of the BYSTRONIC Byspeed 3015 laser cutting machine - maximum laser power: 4.4 kW - wavelength: 10.6 μm - laser beam di ...

2000mm x 8mm x 30ton FIMI CTL Line Cut-to-length line FIMI 2000mm x8mm x 30t can help you handle all your cutting needs with sheet metal up to 8mm thickness, 20000 mm width and 30t maximum coil weight. This line is equipped with two levelers to provide high top straightening quality and flying shear to make cutting process perfect Manufacturer: FIMI – ITALY Year: 1990 Material: CR-GZR-RP-RKK Yield Strength: 180-400 Mpa Tensile Strength: 220-550 Mpa Coil Width: 800-2000mm Coil Thickness: 1-8mm Coil Weight: 30 Ton Line Speed: 1-25m/min Direction: Left to Right Sheet Tolerance/Size: Length Tolerance: +/- 1 mm Diagonal Tolerance: 0.1% x Sheet width Sheet Width: 800 – 2000 mm Sheet Length: 3000 – 12000 mm Electric AC: 380V /50 Hz / 3 phase AC Control Voltage: 110 V Control Voltage: 24 V Double Mandrel Uncoiler Sliding Base Powered Mandrel Expansion Powered ...

Max work-piece diameter: 1250 mm Max work-piece diameter: -With support: 850 mm -Without support: 1350 mm Max module: 12 Table diameter: 935 mm Max work-piece of producing: 2000 kg Milling length with vertical plunge cutting: 560 mm Min number of teeth machined: 20 Distance between Cutter axis and: -Arbor: 115-820 mm -Table: 230-880 mm Main motor power: 10 kW Overall dimensions: 3560x1790x2590 mm Machine weight: 14000 kg

max. work piece diameter, mm 2000 max.work piece length, mm 500 table diameter, mm 1800 max. work piece weight, kg 10000 module 20 max. diameter of installed worm mills, mm 300 max. length of installed worm mills, mm 500 main motor power, kW 14 machine weight, kg app. 32000

WAGNER FCU 1600 universal milling machine manufactured in Germany in 1998 is designed for precision machining of workpieces in X,Y,Z axes with feeds of 1200 mm (X axis), 700 mm (Y axis) and 500 mm (Z axis). The machine characterised by its high reliability and efficiency performs the milling of workpieces on a large work table with a length of 1600 mm and a width of 500 mm using a precision spindle rotating at a maximum speed of 2050 rpm. The milling machine is also equipped with measuring rulers and digital readouts. The total weight of the machine is 4000 kg. Technical data of the WAGNER FCU 1600 milling machine - feed rates in the X/Y/Z axis: 1200/700/500 mm - feed speed in the X axis: 10-1000 mm/min - feed speed in the Y axis: 10-1000 mm/min - feed speed in the Z axis: 5-500 mm/min - rapid traverse in the X/Y/Z axis : 3000/3000/1500 mm/min - working table dimensions (L x W): ...

MAZAK VTC 20C milling centre was manufactured in 1997 in the UK. The machine designed for precise and dynamic machining of workpieces with a maximum weight of 1000 kg has a high quality steel construction, which ensures rigidity and stability during milling. Inside the milling machine is a large work table with a length of 2000 mm and a width of 510 mm, and a reliable spindle that rotates at a maximum speed of 7000 rpm. The VTC 20 C machining centre processes workpieces in three axes with feeds of 1660 mm (X axis), 510 mm (Y axis) and 510 mm (Z axis). The installed MAZATROL M PLUS CNC control allows full use of all the machine’s capabilities. The VTC 20-C vertical machining centre weighs 7320 kg. Technical data of the MAZAK VTC 20C milling centre - CNC controller: MAZATROL M PLUS - work table dimensions (L x W): 2000 x 510 mm - feed rates in the X/Y/Z axis: 1660/510/510 mm -  ...

Many of our machines are available from stock. Call us to find out more. Fiber Laser Cutter FLV-3015-OE 3kW / VF1530-3000W Technical parameters - Maximum sheet size: 3000 x 1500 mm - X and Y axis positioning accuracy: ±0.05 mm/m - Repeatable positioning accuracy of X and Y axes: ±0.03 mm - Maximum speed: 60000 mm/min - Maximum acceleration: 0.7 G - Maximum load: 1200 kg - Power: 3.0 kW - Power requirement: 24.0 kW - Source brand: MAX Photonics - Power supply: ~3x400 V 50 Hz - Protection class: IP54 Cutting thickness - Black steel: recommended thickness 20.0 mm, maximum thickness 22.0 mm - Stainless steel: recommended thickness 8.0 mm, maximum thickness 10.0 mm - Aluminum: recommended thickness 6.0 mm, maximum thickness 8.0 mm - Brass: recommended thickness 5.0 mm, maximum thickness 6.0 mm Construction - Construction type: welded - Number of support legs: 8 - ...

weight: 170 kg diameter: 690 mm height: 940 mm 0: 80 l engine output: 0,7 kW voltage: 380 V work speed: 1500 rpm Vibratory Surface Finishing Machines With Separator VKUE series machines can be used for surface finishing of metal and nonmetal work pieces. These type of machines have large screen area and allow easy separation of work pieces from the grindstones. Optional Accesories - Pneumatic Sound Lid - Pneumatic Flap Control - Frequency Control - Dossage Pump - Magnetic Valve - Control Panel Base - Rinsing Pipe (Different Types) The pictures are for orientation only. The optional accessories can be purchased for an additional charge. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

COMI RICO CCL 1900 x 900 -13T-AB thermoforming machine was manufactured in Italy in 1988. The thermoforming line, consisting of, among others, a heating station, a bulge photocell and a moulded parts conveyor, is designed for the fully automatic production of oversized parts using the thermoforming method. The COMI RICO CCL 1900 x 900 -13T-AB thermoforming machine is equipped with a gauge measuring the thickness of the platen in order to avoid accidentally taking two platens from the package at the same time. The platens, by means of transport grippers actuated by pneumatic cylinders, reach the individual work stations, i.e. the preheating station, consisting of two opposing panels, the plasticising preheating station and the forming unit. In the forming unit, the thermoforming process takes place, during which a BOTTINI GIANNI press with an upper and lower moving table peripherall ...

weight max. in kg: max. 1000 kg turning speeds: 0,18 - 0,58 U/min height: 976 - 1436 mm inclination: 0 - 115 ° table diameter: 895 mm voltage: 380 V total power requirement: 2,0 kW weight: 685 kg range L-W-H: 2414 x 920 x 1436 mm he AK BEND SRH hydraulic weld positioner is great for welding, assembly and maintenance work. The positioning is done via a hydraulic turning and tilting function. Description : - hydraulic turning and tilting function - Fast handling of workpieces - Highest productivity through optimal working position - Lifting, tilting and turning of workpieces in one setting - Low non-productive times by turning components - Highest work performance through pleasant working - Back-friendly work for the user Furnishing : - Stepless speed adjustment - free-moving footswitch - Handheld remote control with 5 meter cable - freely movable control panel with digital speed display  ...

ECKERT JANTAR 2 plasma cutting machine was manufactured in Poland in 2010. The machine with a reliable plasma torch and a large work table with a length of 3000 mm and a width of 1500 mm guarantees its user excellent precision in the machining of thin and thick metal sheets, as well as ensures a high degree of operational safety and long-term failure-free operation. The contamination generated during the process is effectively eliminated by the extraction table, covering the entire working area of the machine. The ECKERT plasma cutting machine is also equipped with a powerful HYPERTHERM HPR130XD plasma source with a power of 130 A and a modern CNC ECS 872 controller. Technical data of the ECKERT JANTAR 2 plasma cutting machine - CNC control: ECS 872 - work table area (L x W): 3000 x 1500 mm - work area (L x W): 3000 x 2000 mm - plasma source: HYPERTHERM HPR130XD - extraction tabl ...

WaterJet OMAX GlobalMAX 1530 was built in 2019 in the United States. This high-quality machine with an indestructible design uses reliable components and innovative jet cutting technology to guarantee clean and precise workpiece edges, regardless of the machined material. The OMAX water cutting machine was first commissioned in 2020 and has so far only worked for 260 hours. The GlobalMAX 1530 water cutting machine machines workpieces made of e.g. steel, glass and plastics on a large work table which maintains high stability even during the heaviest loads. The machine’s easy-to-reach design offers unobstructed access to a working area with a length of 3100 mm and a width of 1645 mm from all four sides, significantly facilitating the process of loading and unloading workpieces. All axes are equipped with innovative OMEGA DRIVE brushless servo motors with feedback loop, which minimise  ...

Manufacturer: Weeke, Type: Optimat BHX 500, Year: 2007, Control: PC 85, Software: Woodwop, Barcode: Ja, Online connection: möglich, Operating system: Windows, Work piece width min-max mm: 70-1000(1300), Work piece length min-max mm: 200-2500, Work piece thickness min-max mm: 8-80, Working range X: 2500, Working range Y-axis: 1000, Working range Z: 80, Beschickungsband: 32, Vertical drilling station from below: 32, Drill support from top: 2, Drilling heads overall: no, Tool changer: 2, Drill vertical Y: 32, Horizontal drills-X: 32, Drill horizontal Y: 8, Zwischentransport: 2, Lock case moulding aggregate: 2 , Number of spindles: 2x2,7, Year :2007

Manufacturer: Meinert, Type: ApstapelanlageMeinert P420-Y/Z-SCH, Year: 2005, Control: 3 Tec, Program: yes, Stacking device: yes, Work piece length max mm: 5200 X 1200, Work piece length min mm: 500 X 5200, Work piece width max mm: 1200, Stack height in mm: ca.1500, Number of stacks: 14, Stack upper edge mm: 1500, Workpiece weight/stack position in kg: ca.120, Start of stack in mm: Boden, Number of sucking lines: 2, Feeding speed max m/min: ca.60, Year :2005

Manufacturer: Biesse , Type: Skipper 100, Year: 2005, Online connection: möglich, Machining stations: 2, Work piece width min-max mm: 150-1000, Work piece length min-max mm: 250-3000, Work piece thickness min-max mm: 10-60, 3 axis control: yes, Vertical drilling station from below: 1, Vertical drilling station from above: 1, Double part drilling: yes, Milling spindles vertical: 2, Power kW 2: ca.4, RPM min-max 2: 1800-24000, Vertical drills-X: 13 von unten und oben, Drill vertical Y: 5 von unten und oben, Horizontal drills-X: 4, Drill horizontal Y: 2, Year :2005

Manufacturer: Biesse , Type: Skipper 100, Year: 2007, Control: CNI, Online connection: möglich, Machining stations: 2, Work piece width min-max mm: 150-1000, Work piece length min-max mm: 250-3000, Work piece thickness min-max mm: 10-60, 3 axis control: yes, Vertical drilling station from below: 1, Vertical drilling station from above: 1, Double part drilling: yes, Milling spindles vertical: 2, Power kW 2: ca.4, RPM min-max 2: 1800-24000, Vertical drills-X: 13 von unten und oben, Drill vertical Y: 5 von unten und oben, Horizontal drills-X: 4, Drill horizontal Y: 2, Year :2007