136,773 used machines on RESALE, but how to find them? Machine Search
FACOM JLS3-POWERBLOCK power strip (ref. 0830497) with 3 Schuko sockets and 2 USB ports, on/off switch, rated 16 A / 250 V. Designed for FACOM JLS3 workshop cabinets (MHDR, MHDRBS, MHTR, MHTRBS). New old stock item. Further technical specifications are not confirmed for this specific unit - please contact us for details. Auction-ID: A7-50988-61
Harmonica slanf, brake resistance, oil system, various cables, Rittal heat exchanger, mounting plate, glue pump, heating element Auction-ID: A1-50476-289
Profile steel base; steel underblade; heavy plywood top; equipped with 2 drawers; heavy-duty Record No. 6 vise jaw width 150 mm; equipped with fluorescent lighting; Auction-ID: A1-50476-202
steel; equipped with 5 and 6 drawers; vice; raised back wall; including content including; clamping tools; Lashing sleeves; iron drills; profile steel base; Auction-ID: A1-50476-65
aluminum base + raised back wall; ertalon table top; equipped with 6 sockets 230 Volt and plug; pneumatic connection; Auction-ID: A1-50476-45
profile steel height-adjustable base; heavy plywood table top; Auction-ID: A1-50476-43
Profile steel height-adjustable chassis; laminated table top; Auction-ID: A1-50476-46
including 9x canteen seat, tubular steel base, plywood shell seat and back; 2x workshop chair seat and back in soft rubber; Auction-ID: A1-50476-211
Kinmatic 80-1A Percision Wire Cutter, M0.8 to M4, Manual Punching Machine with Digital Caliper Auction-ID: A1-50476-136
aluminum base + raised back wall; ertalon table top; equipped with 6 sockets 230 Volt; pneumatic connection; Auction-ID: A1-50476-71
equipped with Hawa lever hand-held profile cutting device; table top; equipped with length stop; work table mounted on profile steel base; heavy plywood table top; equipped with base cabinet and drawer; including various electrical contents including power plugs; Auction-ID: A1-50476-255
Steel Open-Deck Harbour / Utility Workboat Used compact steel workboat designed for utility, manoeuvring and support operations in sheltered waters. The vessel is equipped with an inboard diesel engine, mechanical fuel injection, shaft propulsion, steering wheel and basic analogue instrumentation. Vessel type: Open-deck harbour / utility workboat Hull: Orange-painted steel Propulsion: Inboard diesel engine with shaft drive Engine configuration: Inline four-cylinder marine diesel Fendering: Heavy-duty rubber protection, including tire-type bow fender Deck equipment: Mooring fittings, rope protection, access hatches, stainless-steel rails and ladder Approximate dimensions: 6,000 x 2,400 x 2,200 mm Approximate weight: 4,000 kg The vessel is offered in used condition with substantial coating wear, corrosion and pitting, particularly around the lower hull and waterlin ...
steel; 2-door; door closure defective; including contents including: clamping tools; Lashing sleeves; Auction-ID: A1-50476-61
Height, adjustable; equipped with soft rubber seat; Auction-ID: A1-50476-244
Profile steel base; steel underblade; heavy plywood top; equipped with 2 drawers; Auction-ID: A1-50476-247
Profile steel base; steel underblade; heavy plywood top; Heuer lift bracket; equipped with fluorescent lighting; Auction-ID: A1-50476-251
Wooden worktop 860mm high, 2x drawers, lighting + 3x socket, hose and various materials Auction-ID: A1-50476-125
Profile steel base; steel underblade; heavy plywood top; 2x drawer; including Hawa cable tray cutter lever manually equipped with length stop; 3x socket; fluorescent lighting; Auction-ID: A1-50476-262
steel; 2-door; door closure defective; including contents including empty boxes; without a key; Auction-ID: A1-50476-66
Earth clamp, spring pressure clamp, cables, electric motor, knife, gears, cover cap Auction-ID: A1-50476-282
Wooden worktop 960mm high, 2x drawers, lighting + 3x socket, Gressel vice, air hose reel and various materials Auction-ID: A1-50476-1127
Makita 240V drill, cleaners, Tone TH1E-5 press, air hose couplings, AMP crimping tool with various heads Auction-ID: A1-50476-330
aluminium system profile base; solid core table top; mobile; 1x wheel missing; Auction-ID: A1-50476-240
profile steel height-adjustable base; heavy plywood table top; Auction-ID: A1-50476-33
Height adjustable; equipped with soft rubber seat; including upholstered mobile office chair; Auction-ID: A1-50476-250
Profile steel base; steel underblade; heavy plywood top; Heuer vice, jaw width 150 mm; equipped with fluorescent lighting; 3x socket; Auction-ID: A1-50476-253
Blade height 900mm, 3x drawer, steel blade, caliper, calculator Auction-ID: A1-50476-137
profile steel height-adjustable base; heavy plywood table top; Auction-ID: A1-50476-1034
steel; equipped with 2x5 and 2x5 drawers; 1x door; steel table top; Gressel bench vise jaw width 125 mm; lever plate shear; including contents including: various hand tools; Auction-ID: A1-50476-73
Hemclamp vice, clamps, pneumatic tool with enerpac turbo II foot control, various sanding pads, rear wall extraction not included Auction-ID: A1-50476-110
Worktop 850mm high, mobile, granite measuring stone 400x625mm, 4x rubber pad, Auction-ID: A1-50476-85
steel; 2-door; including contents including: chuck 4 jaws diameter 300 mm; iron drills; machine vise jaw width 210 mm; various clamping tools; Auction-ID: A1-50476-48
352, 8105, 8115, KL43.8, KL35.8T, 8095T, used, 500 Bh Auction-ID: A1-50849-566
Three shelves 2 fixed wheels and 2 swivel wheels with brake Ergonomic screwed handle Height with wheels: 78.4 cm Width: 66.3 cm Depth: 35 cm Maximum load capacity: 150 kg Never used Overall dimensions: 800 x 600 x 200 mm Weight: 10 kg Auction-ID: A7-50796-414
: neu : ca. 10 Wochen ab Auftrags : Türkei : 17700 € : 339.84 € : 100 to : fix : 300 mm : 680 mm : 1520 mm : 8 mm/s : 5 mm/s : 10 mm/s : 500x1520 mm : 100 mm : 190 mm : 2630 mm : 1000 mm : 2350 mm : 2500 kg 2 guidings upper plate with T-slots table plate with T-Slots manometer rapid down move with automtic changeto working speed piston stops in every position 2 hand control table height adjustable according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 10 Wochen ab Auftrags : Türkei : 21500 € : 412.8 € : 150 to : fix : 300 mm : 610 mm : 1520 mm : 9 mm/s : 5 mm/s : 10 mm/s : 600x1520 mm : 100 mm : 190 mm : 2630 mm : 1000 mm : 2470 mm : 3200 kg 2 guidings upper plate with T-slots table plate with T-Slots manometer rapid down move with automtic changeto working speed piston stops in every position 2 hand control table height adjustable according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 12 Wochen ab Auftrags : Türkei : 5500 € : 106.15 € : 30 to : fix : 775 mm : 5 mm/s : 10 mm/s : 1500 mm : 700 mm : 2015 mm : 400 kg steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
equipped with 2 vices with jaw widths of 125 and 150 mm Including 2 smaller tables, size 1200x880x890 mm, top thickness 35 mm Auction-ID: A1-50656-139
Height adjustable. Equipped with: surface-mounted frame, work light and tool panel. Auction-ID: A1-50244-8
Consisting of: 2x workbench size approximately 2150x940mm, top-mounted electric heat shrink tubing cutting machine with foot control and extraction and drawer unit Auction-ID: A1-50244-55
Height adjustable. Equipped with: surface-mounted frame, work light and tool panel. Auction-ID: A1-50244-9
Hydraulic disassembly/workbench, length approx. 600cm, width approx. 45 cm, height approx. 80 cm including workbench dimension 365x82x95 cm, with bench vice 140 mm Auction-ID: A1-50656-189
Various tables in various sizes: - 1x 2000x1750x1000 mm - 2x 2500x1250x1000 mm - 1x 2000x1250x1000 mm Cradle width 1000 mm, height from 700 to 900 mm Auction-ID: A1-50656-158
Height adjustable. Equipped with: surface-mounted frame, work light and tool panel. Auction-ID: A1-50244-83
With hooks on the back wall, shelves, lighting and track (other lots not included) Auction-ID: A1-50244-177
Metal construction and top, wooden drawers, without separate lots including extension reels Auction-ID: A1-50656-152
maximum number of results exceeded
please refine your search
70 € 
