wood used for sale

Capacity (x): 0 Process Application: 0   Other Info: 0 Technical data Vice: width: 200 mm Clamping length: 350 mm High-pressure vice: 30 - 100 kN Description: 3 pieces

Capacity (x): 0 Process Application: 0   Other Info: 0 Technical data Voltage 50 Hz 3x: 400 Volt Installed power: 1.1 kW Weight: 75 kg Dimensions: Length: 1100 mm Width: 650 mm Height: 900 mm

Capacity (x): 0 Process Application: 0   Other Info: 0 Technical data Capacity: 2 to Various accessories: Electronic hand held remote control

Capacity (x): 0 Process Application: 0   Other Info: 0 Technical data Voltage 50 Hz 3x: 400 Volt Installed power: 1.1 kW Weight: 75 kg Dimensions: Length: 1100 mm Width: 650 mm Height: 900 mm

Capacity (x): 0 Process Application: 0   Other Info: 0 Technical data Max. Load: 500 kg Various accessories: Electronic hand held remote control

Capacity (x): 0 Process Application: 0   Other Info: 0 Technical data Max. temperature: 120 °C Maximum pressure: 28 / 22 bar Cooling power: 9.8 / 27.4 W Machine´s weight about: 250 kg Dimensions: Length: 1800 mm Width: 750 mm Height: 1600 mm

Capacity (x): 0 Process Application: 0   Other Info: 0 Technical data Voltage 50 Hz 3x: 380 Volt Dimensions: Length: 450 mm Width: 450 mm Height: 700 mm

Capacity (x): 0 Process Application: 0   Other Info: 0 Technical data Tank contenance: 50 l Paper filter width: 350 mm Weight: 60 kg Dimensions: Length: 800 mm Width: 600 mm Height: 700 mm Description: For full-flow filtration of chips and abrasion-contaminated oils or emulsions with endless belt or consumable fleece. These belt filters are mainly used for high filtration fineness requirements. For the filtration of emulsions, solutions, water and oils when processing steel, cast iron, light and non-ferrous metals.

Capacity (x): 0 Process Application: 0   Other Info: 0 Technical data Voltage 50 Hz 3x: 380 Volt Dimensions: Length: 450 mm Width: 450 mm Height: 700 mm

Capacity (x): 0 Process Application: 0   Other Info: 0

Capacity (x): 0 Process Application: 0   Other Info: 0 Technical data Filling quantity max.: 12 kg Voltage 50 Hz 3x: 380 Volt Total installed power: 0.8 kW Machine´s weight about: 70 kg Dimensions: Length: 1000 mm Width: 900 mm Height: 1100 mm

Capacity (x): 0 Process Application: 0   Other Info: 0 Technical data Spindle nose: ISO: 50 Various accessories: 3-jaw chuck diameter

Capacity (x): 0 Process Application: 0   Other Info: 0 Technical data Filling quantity max.: 12 kg Voltage 50 Hz 3x: 380 Volt Power: 1.8 A Machine´s weight about: 70 kg Dimensions: Length: 1000 mm Width: 900 mm Height: 1000 mm

Capacity (x): 0 Process Application: 0   Other Info: 0

– type TKSF-L – year of production 2007 – DTR CE TECHNICAL PARAMETERS: guide bar length 2000 mm automatic lubrication of the guide rail Cell thickness 3 mm motor power 7.5 kW electric motor 3 x 400 V / 50 Hz / 2800 rpm, direct power transmission Standard package dimensions (W x H) max. 130 x 130 cm (200 cm guide) chain feed speed 13 m/s manual guide feed guiding the cutting system, stabilizer for increased cutting accuracy and as an operator guard Saw type: mobile / fixed material Guide rail: full induction hardened steel cutting capacity 1.8 min /m2 cutting accuracy +/- 1 mm, with even ground - depending on the chain saw/material drive manual relay, automatic star-delta switch transport dimensions 385/90/180 cm weight 180 kg

Capacity (x): 0 Process Application: 0   Other Info: 0 Technical data Voltage 50 Hz 3x: 400 Volt Installed power: 0.55 kW Weight: 60 kg Dimensions: Length: 650 mm Width: 500 mm Height: 1100 mm

Capacity (x): 0 Process Application: 0   Other Info: 0

BRAND AND MODEL MAGGI BEST 960 FEATURES POWER 4 HP, RPM 2800, DISC DIAMETER 350 MM, ALT MAX CUT 110 MM, LONG MAX CUT 870 MM

Capacity (x): 0 Process Application: 0   Other Info: 0 Technical data transfer printing process machine Execution: Elektro-pneumatic Printing block dimensions: Length: 80 mm Width: 80 mm Dimension of the workpice: Diameter: 50 mm Imprint dimension: Length: 50 mm Width: 50 mm Production: 2400 pce/h Air consumption min.: 6 atm Air consumption about: 2.3 m3/h Voltage 50 Hz 3x: 220 Volt Machine´s weight about: 75 kg Overall dimensions machine: Length: 600 mm Width: 540 mm Height: 350 mm

Sell Stromab oleo-pneumatic saw PS 600 P with infeed and outfeed roller benches year 1999 motor 7,5kW Blade diameter 600mm Capacity : Ht 210mm 90 cut : 450mm/ 45 cut : 320mm Power supply : 380 V + 6 bar compressed air (for the presser and the automatic feed) weight : 700kg no delivery - to be collected

Capacity (x): 0 Process Application: 0   Other Info: 0 Technical data Table length: 380 mm Longitudinal travel (X-axis): 0.23 mm Vertical travel (z axis): 350 mm Width: 1 mm Height: 1400 mm Speeds up to: 2700 rpm Distance between centres: 2700 mm Length: 1000 mm Width: 1600 mm Voltage 50 Hz 3x: 380 Volt Driving motor (motor power): 0.23 kW Machine´s weight about: 350 kg Overall dimensions machine: Length: 1400 mm Width: 1000 mm Height: 1600 mm Various accessories: Cast-iron base

Rover Machining center biesse rover c6.50 very good condition about 6000 h, one 4 axis spindle, 1 3 axis spindle, drilling block biesse works software Machine visible in operation

Capacity (x): 0 Process Application: 0   Other Info: 0 Technical data Aspirated air: 1000 m3/h Static pressure: 1400 Pa Voltage 50 Hz 3x: 400 Volt Installed power: 0.55 kW Weight: 65 kg Dimensions: Length: 580 mm Width: 520 mm Height: 1400 mm

Capacity (x): 0 Process Application: 0   Other Info: 0 Operating hours: 563 Technical data Engine type: Gas: LPG Max. Load: 5000 kg Fork width: 1630 mm Fork length: 1500 mm Width of each fork: 150 mm Dimensions: Length: 2980 mm Width: 2630 mm Height: 2660 mm Various accessories: Sideshift Fork extension: 2500 mm safety belt Tires solid rubber Worklights Description: Door on the left is missing

Capacity (x): 0 Process Application: 0   Other Info: 0 Technical data Dimension of travelling rack: Length: 530 mm Width: 320 mm Diameter: 200 mm Max. loading capacity: 80 kg Minimum cycle time: 4.5 min. Compressed air from: 5 bar Power of the heating: 30 kW Voltage 50 Hz 3x: 400 Volt Total power required: 44 kW Machine´s weight about: 2700 kg Dimensions: Length: 2735 mm Width: 1870 mm Height: 2532 mm Various accessories: Number of cages: 10 Distilling Systems

SCM Ergon, year of construction 2000 composed of two floors that can work individually or in unison. X 4100 Y 2100 Z 250 Machine available after October 2023

Capacity (x): 0 Process Application: 0   Other Info: 0 Technical data Capacity: 25 l/min Maximum pressure: 20 bar Cooling power: 3000 W Voltage 50 Hz 3x: 400 Volt Total installed power: 0.77 kW Machine´s weight about: 100 kg Overall dimensions machine: Dimensions: Length: 1311 mm Width: 1168 mm Height: 730 mm

Length 1360.0 Width 1180.0 Height 1400.0 Weight 750.0

Cnc machining center SCM IBERICA ROUTOMAT 2P The machine is located in Spain.

NESTING MACHINE IN EXCELLENT CONDITION WITH AUTOMATIC LABEL PRINTING AND AUTOMATIC LOADER/UNLOADER, 3 AXIS

CNC Busellato, working length 6m, can be started. very good condition inspection under power is possible video available

Capacity (x): 0 Process Application: 0   Other Info: 0 Technical data Weight: 60 kg Dimensions: Length: 550 mm Width: 160 mm Height: 130 mm Vice: width: 160 mm Clamping length: 200 mm Jaw height: 50 mm

Capacity (x): 0 Process Application: 0   Other Info: 0 Technical data Voltage 50 Hz 3x: 380 Volt Power: 2.8 A Dimensions: Length: 1000 mm Width: 800 mm Height: 1400 mm

Capacity (x): 0 Process Application: 0   Other Info: 0 Technical data Weight: 60 kg Dimensions: Length: 550 mm Width: 160 mm Height: 130 mm Vice: width: 160 mm Clamping length: 200 mm Jaw height: 50 mm

Capacity (x): 0 Process Application: 0   Other Info: 0 Technical data Weight: 30 kg Dimensions: Length: 400 mm Width: 300 mm Height: 400 mm

For sale Dusseldorf pallet straightening and riveting machine, almost new, working in all its parts.

WEINMAN Power 220 machining centre Year of manufacture: 2014 CE Marked

Capacity (x): 0 Process Application: 0   Other Info: 0 Technical data Weight: 60 kg Dimensions: Length: 550 mm Width: 160 mm Height: 130 mm Vice: width: 160 mm Clamping length: 200 mm Jaw height: 50 mm

Capacity (x): 0 Process Application: 0   Other Info: 0

Capacity (x): 0 Process Application: 0   Other Info: 0 Technical data Total power required: 220 kVA Total power required: 0.3 kW Overall dimensions machine: Length: 420 mm Width: 390 mm Height: 700 mm

Capacity (x): 0 Process Application: 0   Other Info: 0

Capacity (x): 0 Process Application: 0   Other Info: 0

Capacity (x): 0 Process Application: 0   Other Info: 0 Technical data Aspirated air: 141750 l/min Maximum pressure: 28 bar Machine´s weight about: 338 kg Overall dimensions machine: Dimensions: Length: 1311 mm Width: 1168 mm Height: 730 mm

Capacity (x): 0 Process Application: 0   Other Info: 0

Capacity (x): 0 Process Application: 0   Other Info: 0 Technical data Cross table Clamping surface: Length: 340 mm Width: 200 mm Number of T-channels: 3 T-channel width: 10 mm Weight: 80 kg Dimensions: Length: 500 mm Width: 450 mm Height: 130 mm

Capacity (x): 0 Process Application: 0   Other Info: 0 Technical data Machine´s weight about: 50 kg Dimensions: Length: 600 mm Width: 400 mm Height: 250 mm

Capacity (x): 0 Process Application: 0   Other Info: 0 Technical data Weight: 40 kg Dimensions: Length: 560 mm Width: 125 mm Height: 110 mm Vice: width: 125 mm Clamping length: 200 mm Jaw height: 40 mm

Capacity (x): 0 Process Application: 0   Other Info: 0 Technical data Clamping surface: Diameter: 300 mm

Capacity (x): 0 Process Application: 0   Other Info: 0 Technical data Weight: 30 kg Dimensions: Length: 500 mm Width: 125 mm Height: 100 mm Vice: width: 125 mm Clamping length: 200 mm Jaw height: 40 mm Clamping force max.: 20 - 40 kN

Capacity (x): 0 Process Application: 0   Other Info: 0 Technical data Taper in spindle: BT 50 Diameter: 53 - 70 mm