wood working full used for sale

Description: with control unit Untested / defects cannot be excluded Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,800 mm, weight approx.: 650 kg

Description: Untested / defects cannot be excluded Approx. Onsite Dimension. (l x w x h): 1,300 x 1,000 x 1,850 mm, weight approx.: 1,050 kg

Description: Max. lifting capacity: 365 kg Untested / defects mannot be excluded Approx. Onsite Dimension. (l x w x h): 2,400 x 900 x 2,300 mm, weight approx.: 1,880 kg

Description: Untested / defects cannot be excluded Approx. Onsite Dimension. (l x w x h): 2,100 x 2,100 x 900 mm, weight approx.: 1,300 kg

Description: working height: 8,100 mm incomplete Approx. Onsite Dimension. (l x w x h): 2.600 x 2.200 x 1.000 mm, weight approx.: 2.200 kg

Description: incomplete Approx. Onsite Dimension. (l x w x h): 1.000 mm, weight approx.: 1.900 x 2.200 x 900 kg

Description: serial number: IT46011685 Approx. Onsite Dimension. (l x w x h): 2,300 x 900 x 2,000 mm, weight approx.: 1,300 kg

Townsend mobile skinning machine, working width: 500 mm, total dimensions: 800 mm x 900 mm x 980 mm.

Article number: 01-05-001 Manufacturer: Eckold Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1995 L x W x H: approx. 1200x800x1800mm Weight: approx. 400kg Accessories  Hydraulic power unit Other accessories on request Price and other technical data on request

weight max. in kg: kg dimensions: mm weight: kg height of stroke: 14,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: without control panel Untested / defects cannot be excluded Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,700 mm, weight approx.: 600 kg

Reiser breaker, model: Rotaclaw, working width: 500 mm, total dimensions: 1400 mm x 1500 mm x 1800 mm.

Transport belt with 4 working stations, s/s frame, plastic belt, belt width: 370 mm, total dimensions: 4450 mm x 1300 mm x 880 mm.

Description: consisting of: Tappings Saw blades Drill chucks Twist drills in different versions and sizes weight approx.: 300 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 600 x 800 mm

LASER PRIMA INDUSTRIE Mod. 2D/3D DOMINO Year 2006 1500x3000 2.5 kw 22,000 working hours Visible in operation No loading and unloading

Description: Item never been used Working height: 9000 mm. Platform height: 7000 mm Load capacity: 500 kg. Platform dimensions: 2100x830 mm. Climbing speed: 4-6 min (ascending) , Road support scissors: 120x60x3,75 mm Hydraulic oil cylinder: Diameter80x1 mm Hydraulic oil pump Lifting power with electric motor : 1.1kw , Manual displacement Solid wheels. The item that is delivered is NOT the one shown in the photographs, but an identical one. Approx. Onsite Dimension. (l x w x h): 2,250 x 1,000 x 2,250 mm, weight approx.: 900 kg

Description: Item never been used Working height: 9000 mm. Platform height: 7000 mm Load capacity: 500 kg. Platform dimensions: 2100x830 mm. Climbing speed: 4-6 min (ascending) , Road support scissors: 120x60x3,75 mm Hydraulic oil cylinder: Diameter80x1 mm Hydraulic oil pump Lifting power with electric motor : 1.1kw , Manual displacement Solid wheels. The item that is delivered is NOT the one shown in the photographs, but an identical one. Approx. Onsite Dimension. (l x w x h): 2,250 x 1,000 x 2,250 mm, weight approx.: 900 kg

Description: Floor size: 6600 x 1290 mm No. 12-position tool changer. Main spindle with No. 9-tool drilling head. With auxiliary edging head equipped with No. 3 edge slots magazine of adjustable size, size range from: 10mm to 600mm by interchanging the slots. Present two SIEMENS vacuum pumps with NASH ELMO fans.  , Y-axis travel: 1750mm Z-axis travel: 250 mm X-axis travel: 6000 mm  , Control: OMATIC  , Approx. Onsite Dimension. (l x w x h): 8,000 x 4,000 x 2,450 mm, weight approx.: 5,000 kg

Description: approx. 24 pieces , different heights and contact surfaces Approx. Onsite Dimension. (l x w x h): 2,000 x 2,900 x 1,400 mm, weight approx.: 150 kg

used Vertical CNC machining center, 3 axes Brand: Biesse Type: Skipper V31 Year: 2018 only a few hours of use vertical working, feed through collet chuck Equipment machining head: - milling spindle 4,5 kW, ISO 30 - 10 individually callable vertical + 6 horizontal spindles - grooving saw Ø with 120 mm working area: 3200x900mm Note: The specifications and descriptions are a copy of the order confirmation at that time. Data are for information and are not binding.

CNC working center Weeke Type: Professional BHC 600 Year of construction: 2003 TOOL CHANGE SPINDLE 12 KW - HSK F63 INCL. LIQUID RECIRCULATION infinitely variable 1,250 - 24,000 rpm. programmable max. 9/12 kW in continuous/intermittent operation (S1/S6-50%) WORKING LENGTH X AXIS 7250 MM WORKING WIDTH Y-AXIS 1300 MM AUTOMATIC TOOL CHANGE MAGAZINE FOR 8 PLACES (PLATE CHANGER) AUTOMATIC TOOL CHANGER M. 18 MAGAZINE PLACES Automatic tool changing system in the X direction riding on the machine stand AGGREGATE INTERFACE F.D.MAIN SPINDLE, To accommodate the adapter units including interface Pneumatic and swivel drive C-axis with Torque entrainment and 3-point support VERTICAL DRILLING UNIT, 26 SPINDLES Drive: 1.5 kW 11 spindles with step 32 mm in X-direction 11 spindles with step 32 mm in Y-direction 4 spindles with step 50 mm in X-direction Spindle type: indiv ...

new CNC working center Brand: Cosmec Type: Smart 30, 4 Axis example configuration: other equipment on request the smart serie: - Flexibility through cantilever construction - Best equipped for door processing - Protection by laser system (instead of step mats) - Especially good for machining light / small workpieces the controlling: OSAI CNC system controlling + Aspan CAD-CAM Software: - Aspan uses simple commands to perform machining - By entering dimensions you can precisely position the machining operations - The machining operations are displayed on the virtual workpiece. - Various macros facilitate programming (of holes, slots, linear milling, arc milling...) Aspan Doors - Software module for easy creation of programs for door processing - Different door types are already stored (doors with milled arches, round doors...) - Doors can be modified individ ...

CNC working center Brand: Comec Type: Variax J new machine The highest level of progress for your door frame production: 6 controlled axes and a fast production process characterize the Variax J. Movable machining support - All axes move on ball bearing mounted BOSCH-REXROTH or comparable linear guides - Movement / positioning of the machining units max. 70 m/min. - Axis X = 2950 mm - Axis Y = 400 mm - Axis Z = 500 mm - Axis support for vertical rotation of the machining head. axis B from -135° to +135°, motor kW 0.45. - Axis support for horizontal rotation of the machining head. Axis C from -180° to +180°, motor kW 0.45. Machining head - electrospindle 1-2 - N°1+1 electrospindle fixed to the H support - N°1 electrospindle for milling, - with 2 spindle outputs, kW 7.0 / 12-18.000 rpm, adjustable by means of frequency converter Tool attachment wit ...

Ingredient Cart with 9 ingredient trays Stainless steel with 4 swivel castors External dimensions approx.: 670 x 500 x 1770 mm Tub size approx.: 600 x 430 mm Used appliance cleaned Many more devices in stock!

Ingredient Cart/Table with 6 ingredient trays Stainless steel with 4 swivel castors External dimensions approx.: 1300x600x1000 mm, WxDxH Stainless steel plate top with 3-sides gallery Used appliance cleaned We have a large selection of high-end furniture!

Stack dimensions (LxWxH) - 16m x 1,4 m x 1,6 m automatic drying by means of computer Heating power - 90 kW Top Condition

Cutting Height - 250 cm, with small changes even up to 300 mm. Width - 450 mm. Feed continuously, up to 40 m / min. 2 moving sockets for 3 blades each and one middle socket is possible. Engines - 2 pc. each 45 kW Complete with round wood feeder. Wood rotating device and centering. Automatic remote control.

Motor logs gripper with electro-hydraulic drive. Diameter: 1,000 mm Weight: 1,260 kg Drive parts: 1) Electric motor 5.5, kW - 100% ED, protection class IP 54, rotary 1,450 rpm, operating voltage 380 V, 50 Hz 2) Constant pump - axial piston - inclined axis design, type A2FM. Flow capacity 23.2 l/min 3) Hydraulic cylinder (2 pcs.) Type 80/55, MAKE MRS double-acting, piston rods hard chrome-plated 4) Tax block NG 10, make Of Herion Turning ranges, change of direction of rotation changing from right to left and left to right, for all drive parts of Pos. 1) - 4) Fittings: made at Ermeto Electrical control: Installation according to electric circuit diagram No. 26.0.144.4 In very good condition!

Recycling plant with all necessary permits for the processing of wood, metal, plastic, compost, etc. is provided the supply of biomass to operate a remote heating system with 2-3 MW of power. There are corresponding contracts with energy buyers. Plot 7200 m2, fixed and is partially built over 2000 m2 Preparation year 2012-more information at Peter Ari Schär of MATEC Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland

gebr. Wooden tongs / tree pliers / pipe wrench

The plant is 6 months old and is being abandoned due to conversion of production. The plant is still in use today, so it can be visited in operation. The installation site was an all-round closed hall, so the system is as good as new and enables the economic use of heat energy. In addition, the electric feed-in tariff for the electricity generated in your CHP is improved. 3 cent CHP bonus according to EEG-2009 per kilowatt hour used. There are 2 containers of wood chips/firewood (35m3) to be connected. NOTE TO PICTURES: Plant can only dry 2 containers and is half as wide as shown on pictures. Construction analogous to drying system for 4 containers! Drying time wood chips: 4 days (fresh forest to 10% residual moisture) Drying time log wood (33cm): 5 days (fresh from the forest to 20% core moisture) System consists of: intake hopper for air incl. dust filter Blower unit ( ...

Wood chip dryer, firewood dryer for 4 containers The plant is abandoned due to conversion of the production. The plant is still in use today, so it can be visited in operation. The installation site was an all-round closed hall, so the system is as good as new and enables the economic use of heat energy. In addition, the electric feed-in tariff for the electricity generated in your CHP is improved. 3 cent CHP bonus according to EEG-2009 per kilowatt hour used. 4 containers of wood chips/firewood can be connected ( 35m3). Drying time wood chips: 4 days (fresh forest to 10% residual moisture) Drying time log wood (33cm): 5 days (fresh from the forest to 20% core moisture) System consists of: intake hopper for air incl. dust filter Blower unit (radial fan with motor 11kW) Heater 480kW Funnel for air flow incl. 4 shut-off valves and & 4 pieces connections Power con ...

Wood Turning Lathe Precision device for professional users, with grey cast iron variable speed control high degree of spindle concentricity Spindle can be fixed all 15° LCD speedometer One hand operation of the tailstock and tool rest with quick-release mechanism Voltage: 230V / 50 Hz Engine power: 735W (S1 100%) Tip height: 160 mm Top width: 510 mm Speed ranges: 250-750 m-1, 550-1650 min-1, 1300-3850 min-1 Spindle stock rotation: 180 degrees Headstock thread: M33 DIN800 Morsekonusaufnahme: MK2 / MT2 Quill stroke: 63 mm Weight: 52 kg Dimensions: 1035 x 305 x 449 mm G & HM-D510F

The ECOSTAR 8 slices hacker with diesel drive 35 HP, 3 cyl., with an increased swivel discharge for horticulture, wine fruit, forestry, agriculture, etc. at a cheap price. With 2 blades, disk diameter 605 mm, disc speed 1200 rpm, JD diesel engine 3100, 3 cyl, 35 HP, water-cooled, feed height 200 mm, max wood diameter 200 mm, Einzugbreit 225 mm, hopper opening 600/600 mm, output per hour 5-8 cubic metres. The machine is ready for use within 1 minute. The chips can easily be abandoned on the bridge of the towing vehicle. The tedious tying of the branches fall away. Take the chips only 1 time in the hands. Watch the video movie in matnews91 on YouTube: ECOSTAR diesel JD3100 8. Price does not include trailer euro 9' 390.00 Expressly subject to technical changes, prior sale and error! Shipping costs CH / DE trucked approximately euro 280.00 MATEC systems + technology GmbH K ...

Wood chopper f. tractor PTO wood chipper ECOSTAR 8 as a kit for the self-Assembly (image mounted with other rotating device) - feeder height width 20/20 cm - upper feed roller with belt drive - disk hacker with 2 knives and 1 counter knife - rated about 5 cubic metres chip length nominal 15 mm - CE compliant - PTO - rotating ejector - delivered in metal crates -Warranty: 2 years on all non - consumable - options for an additional fee: - machine Assembly by supplier - pulverizing integrated to avoid excess - special execution for the manufacture of Pelletschnitzeln with 6 mm length - professional Rotary chute which together does not rust and freezes at Sub-zero temperatures, with lever - built diesel drive 35 HP - electric motor 15 kW model changes built up which are not exactly the figurative representation are reserved! Spare parts/service MATEC CH-4952 Eriswil/DE-79618 Rheinfe ...

Slow runner with sliding floor 800 mm wide rotor 22 kw engine

Important and outstanding design features of the RaptorX-SL with steel substructure / RaptorX-SL2200/S20 The application variety of a RaptorX-SL CNC Fraes machine is variable due to the adjustable working area (read-through shoe under bridge: 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (at no extra charge) extremely large. special groesmes up to 17,500 mm (at one scale ) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-plates. Use the system as a plasma cutting system or waterjet cutting system, corresponding extensions are available. In the middle range of the machine (between the footpipes ) you can even process parts up to a height of 850mm (beam shroughl, etc. ) or 3D body up to about 400mm height (at 400mm ...

Specifications / Technical data S-1000/T Portalfraesmaschine / Engraving machine With the T-variant of the High-Z CNC-Fraese you acquire old-fashioned technology with the certain i-tuepfelchen in TUeV-certified quality (Emc). The High-Z/T Fraese is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. Through the ball-circuit spindles used, the High-Z/T achieves fantastic accuracy and an almost unmeasurable reverse play of about 0.01mm. At the same time, high travel speeds of up to approx. 108mm / second ( 6500 mm / minute ) can be achieved. This is how engraving and fraes speeds of up to approx. 4500mm/min can be realized and urgent journeys up to approx. 7000mm/min. Here you can see a video about empty runs with the new high-Z/T 3D CNC machine. This makes this machine series in the industrial sector just as applicable for work ...

Specifications / Technical Data S-1000/T CNC-Router / CNC-Engraver With the purchase of the T-variation of High-Z CNC-router you get a proven technology with a certain icing of the cake in TÜV-certified quality. High-Z/T was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T CNC-engraver achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machine you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This cnc-router series is usable in the industrial field as well as for works like engraving, milling, dr ...

Specifications / Technical Data S-720/T CNC-Engraving-Machine / Milling machine / CNC-Router With the purchase of the T-variation of High-Z CNC-router you get a proven technology with a certain icing of the cake in TÜV-certified quality. High-Z/T 3D-cnc-engraver was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T cnc milling machines achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machines you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This cnc-machine series is usable in the industrial ...

Slow runner with sliding floor Rotor width 800 mm 18.5 kw motor

Wood Turning Lathe big turning diameter over bed allows the turning of workpieces with large diameter - ideal for turning E.g. plate user friendly adjustable speed Digital speed display comfortable working with hand pad and quick adjustment Spindle/tailstock bore 10 mm Top width: 457 mm Tip height over machine bed: 153 mm 3-stage variable spindle speed: 650-1450 min-1, 1250-2800 min-1, 1600-3800 min-1 Headstock, thread: M33 DIN800 Motor power S1 (100%) / S6: 550W / 770W Mains voltage: 230V Net weight: 33kg G & HM-D460FXL

PIN cutting machine Clamping width of 240 mm beam height of 320 mm spigot strengths of Max 130 mm PIN length of 350 mm motor power 2,2 kW 380 Volt motor weight approx. 120 kg

Equipment / Product data of the CNC-Fraesen Type High-Z/TRex series / Type 1215 Drive: 3 busiest brand stepper motors with 4.5 amperes. Pushing through long and up to 120mm high materials possible, as no belt drive is in the way at the end of the X axis! linear guides on all axes of HIWIN / THK ! Multiple ball-bearing ball thread spindles on all axes, brand edging! speed speed max. 12,000 mm/min Working speed max. approx. 8,000 mm/min Technical platform X/Y: 0.005mm (1/10 step); Z: 0.0025mm reverse play maximum approx. +/- 10 microns (0.010 mm) Point repeatability: approx. 0.01 mm clamping area 1860 x 1340 mm travel distances: X=1500mm; Y=1200mm; Z= 130 mm contact contactno-point sensors / reference switches / limit switches on all axes Double-secured emergency trigger energy chains for clean cable Total mass with motors : LxWxH approx. 2180 x 1800 x 1420 mm Fra- Sc ...

3D CNC Router T-Rex 1215 / Technical Data : Equipment / product data CNC-milling machine type High-Z/TRex series: Drive: 3 brushless brand stepping engines with 4,5 ampere. Possibility of sliding through long and up to 120mm high materials, no belt drive at the ende of the X axis! Linear guide on all exis by HIWIN / THK ! Multiple ball-bearing ball-screw spindle on all axes, proprietary brand! Rapid traverse max. ca. 12.000 mm/min Operating speed max. ca. 8.000 mm/min Technical definition X/Y : 0,005mm (1/10 Schritt); Z: 0,0025mm Backlash maximal ca. +/- 10µm (0,010 mm) Repeat accuracy: ca. 0,01 mm Clampin surface of grooven panel / T-slot table 1860 x 1340 mm Travels: X=1500mm; Y=1200mm; Z= 130 mm Non-contact reed sensors / reference switches / limit switches on all axes Double secured emergency-stop button Energy chains for a clean cable routing Total dimensions wi ...

Power range: 200 - 320 kW Rated heat output: 320 kW Maximum permissible operating overpressure: 4 bar Maximum permissible operating temperature: 120°C Length: 3250 mm Width: 2500 mm Height: 2440 mm Diameter of exhaust pipe: 300 mm Fire room volume: 0.77 m3 Power of the combustion air blower: 0.4 kW Power of the rust drive: 0.12 kW Smoke fan power: 2.2 kW Fuels: residual wood (wood chips with and without bark, coarse and fine content max. 20%, main part 60-100%) Fuels according to 1.BlmSchV of 15 July 1988 Water content of the fuel: W20-W40 (dry to moist) Fuel size: G30,G50 (fine wood, medium chip) Feeding: Automatic (manually possible by filling door in emergency mode) The plant is offered with the following attachments: • Insertion unit with insertion screw, motor and attached rotary valve (measurement from boiler output: 1000mm (length) 700m (height with rotary ...

Slow runner with sliding floor 800 mm rotor width 11 kw motor good condition

Slow runner with sliding floor 800 mm rotor width 11 kw motor

Optical measuring geraet from Bundeswehr bestaenden, probably unused Manufacturer Leitz Adjustment equipment Pipe weapon for target line testing Kal 20 to 260mm with adjustment telescope Target line tester new condition Completely! Rest according to photos Special price