We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,260 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Technical data Voltage 50 Hz 3x: 380 Volt Driving motor (motor power): 0.5 kW Machine´s weight about: 140 kg Overall dimensions machine: Length: 1000 mm Width: 600 mm Height: 500 mm
used
Technical data Longitudinal travel (X-axis): 40 mm Transversal travel (y-axis): 45 mm Dimensions: Length: 550 mm Width: 350 mm Height: 600 mm Various accessories: Projector: Screen diameter: 100 mm
used
Technical data Voltage 50 Hz 3x: 220/380 Volt Machine´s weight about: 60 kg Overall dimensions machine: Length: 800 mm Width: 600 mm Height: 800 mm
used
Technical data Voltage 50 Hz 3x: 380 Volt Total installed power: 2.5 kW Overall dimensions machine: Length: 1000 mm Width: 800 mm Height: 1700 mm
used
Technical data Quantity delivered: 60 l/min Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 90 kg Overall dimensions machine: Length: 1000 mm Width: 600 mm Height: 500 mm
used
Technical data Table length: 900 mm Table width: 530 mm
used
Technical data Table length: 700 mm Table width: 350 mm
used
used
Technical data transfer printing process machine Execution: Elektro-pneumatic Printing block dimensions: Length: 80 mm Width: 80 mm Dimension of the workpice: Diameter: 50 mm Imprint dimension: Length: 50 mm Width: 50 mm Production: 2400 pce/h Air consumption min.: 6 atm Air consumption about: 2.3 m3/h Voltage 50 Hz 3x: 220 Volt Machine´s weight about: 75 kg Overall dimensions machine: Length: 600 mm Width: 540 mm Height: 350 mm
used
Technical data Voltage 50 Hz 3x: 380 Volt
used
Technical data Cross table Execution: Horizontal Clamping surface: Length: 350 mm Width: 260 mm Travels: longitudinal: 250 mm Crosswise: 250 mm Table height: 182 mm Number of T-channels: 5 T-channel width: 14H7 mm Machine´s weight about: 80 kg Dimensions: Length: 400 mm Width: 300 mm Height: 200 mm
used
Technical data Speeds from: 25´000 rpm Speeds up to: 60´000 rpm Diameter: 50 mm Voltage 50 Hz 3x: 380 Volt Driving motor (motor power): 0.2 kW Machine´s weight about: 5 kg Overall dimensions machine: Length: 250 mm Width: 175 mm Height: 175 mm
used
Technical data Voltage 50 Hz 3x: 380 Volt Dimensions: Length: 1200 mm Width: 800 mm Height: 1200 mm Various accessories: Magnetic separator Paper filter facility
used
Technical data Machine´s weight about: 50 kg Overall dimensions machine: Length: 700 mm Width: 400 mm Height: 250 mm
used
Technical data Speeds from: 4000 rpm Units: horizontal: 4 Clamping with device: 2 - 65 daN Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 300 kg Overall dimensions machine: Length: 1300 mm Width: 900 mm Height: 1700 mm Various accessories: Lamp Coolant system Cast-iron base
used
Technical data Max. drilling diameter: 10 mm Stroke max.: 70 mm Overall dimensions machine: Dimensions: Length: 1850 mm Width: 700 mm Height: 2400 mm Various accessories: Coolant system Cast-iron base
used
Technical data Taper in spindle: 50 ISO Machine´s weight about: 70 kg Overall dimensions machine: Length: 700 mm Width: 300 mm Height: 500 mm
used
Technical data Voltage 50 Hz 3x: 380 Volt Overall dimensions machine: Length: 1000 mm Width: 700 mm Height: 1500 mm
used
Technical data Speeds from: 4000 rpm Units: horizontal: 2 Clamping with device: 2 - 65 daN Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 300 kg Overall dimensions machine: Length: 1300 mm Width: 900 mm Various accessories: Coolant system Cast-iron base
new
Aluminium angle conveyor belt incl. substructure horizontal range 2000mm (adjustable) Rising range 2200mm (customizable) Angle in the kink freely selectable: 30, 35, 40 or 45° Conveyor belt width 500mm (adjustable) We supply our conveyor belts in PVC, PU or rubber. PVC conveyor belt incl. carrier and shaft edge Drive: Motor 1.1KW ( adjustable ), speed 0.3m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 6x adjustable machine feet for alignment Shaft edge: 40x35mm (adjustable) T-20 studs - 400mm pitch (customizable) 2-layer particularly transversely stable Our core competence lies in providing the customer with exactly what he really needs. Together with our customers, we develop customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone ...
used
Aluminium riser conveyor belt with substructure Abm: approx. 2000 + 2000mm Discharge height: 1600mm ( example ) Height of the horizontal area 200mm ( example ) Conveyor belt green, 2-layer particularly transversely stable endless welded with step connection antistatic due to threads in the fabric of the running side Drive, motor control optional Stainless Steel Hopper - Material Feed
used
Capacity (x): 1 Process Application: 1 Other Info: 1 AMF Spanntechnik - K20 - 554755 Zero Point clamping modules (6 x) Type: K20 - 554755 YOP: 2016 2 x AMF PowerTube 46 with 60 Bar to ope/clamp 4 x AMF K20 model with diameter 110 mm 2 x AMF package hose / tube / cables Zero point clamping system improving set up time optimized clamping during cutting and non cutting machining. Pull-in locking force 17 kN Holding force 55 kN Length:170 mm Width:170 mm Height:60 mm Weight:2,6 kg
used
Wood Milling Machine Fabr. MARTIN Type T 21 AVMachine -No: 71662 Year 1969Speeds: 3000/4500/6000/9000 rpm.Voltage: 380Vpole-changing motor: 6.4 / 7.8 hpMotor protection switch: 2With- Feed device- Sliding table with 1270 mm working distanceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Vertical wood milling machine (router) make SCM type T 120 CMachine -No: 1170480, built in 1980Table size: 1100 x 900 mmTable height: 850 mmvertical adjustment of the spindle: 185 mmSpindle diameter: 35 mm5 spindle speeds: 2900 - 10000 rpm.Max. Diameter of tenon cutting disc up to: 400 mmDrive power: 7.5 hpWeight approx.: 610 kgOutside dimensions approx. 1120 x 900 x 850 mmWith- mot. Roll feedused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Notching machine make ROTOX type SAF 164Machine -No: 164-839 built in 1985Technical specifications:machinable profile width: 50 - 300 mm 90 °machinable profile height: 50 - 180 mmMilling hole: 40 mmDrive power: 2.2 kWWith- Miter guide with 1 ° scale and gridused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
new
Description: -Powerful, fully hydraulic wood saw with electric motor -Hydraulic feed and conveyor belt 320 cm long and 15 cm wide -The conveyor belt is lifted and lowered with a winch -The length of the firewood can be set as desired. The maximum length is 30 - 57 cm, diameter 37 cm -The price includes a 3.2 meter conveyor with a winch, belt width 150 mm Technical specifications: Motor: 7.5kW, 50Hz, 380V, 3-phase Weight: 520 kg Max. log diameter: 38 cm Max. log length: 55 cm Engine speed: 4800 rpm Chainsaw: 18 inches (STIHL) Cylinder bore: 3.2 inches Duty cycle time: 7 seconds Tires: 12 inches Splitting wedge: 4-handed (optional 6-handed) -This machine is available right away. -For shipping information contact us directly.
used
Pellet oven Häussler Habomat 20 wood pellet Häussler Habomat 20 - Voltage: 230 Volt - Frequency: 20 Hz - Electricity: - Ignition phase: 7.3 A - Operation: 0.81A - Rated thermal input: 35 kW - Fuel: Wood pellets HP5 - Year of construction 2011
used
Max Diameter 485mm Min length 1500mm, Max length 5500mm Drive power from the rotor disc 315kw Feeding step separator, feed belt, metal detector Removal Bruks 2x screws 1x 600x6.500mm and 1x 800x9.500mm Wood chip length 25mm Cabinets Year of construction/commissioning 2004 Working hours approx. 12500 hours Capacity 80-100 Qm3/h
used
Max Diameter 485mm Min length 1500mm, Max length 5500mm Drive power from the rotor disc 315kw Feeding step separator, feed belt, metal detector Removal Bruks 2x screws 1x 600x6.500mm and 1x 800x9.500mm Wood chip length 25mm Cabinets Year of construction/commissioning 2004 Working hours approx. 12500 hours Capacity 80-100 Qm3/h
used
Max Diameter 485mm Min length 1500mm, Max length 5500mm Drive power from the rotor disc 315kw Feeding step separator, feed belt, metal detector Removal Bruks 2x screws 1x 600x6.500mm and 1x 800x9.500mm Wood chip length 25mm Cabinets Year of construction/commissioning 2004 Working hours approx. 12500 hours Capacity 80-100 Qm3/h
used
KDA 200 Cone rotator Universal G&-4973-M1768
used
Oven, wood chip stove, biomass stove, boiler used Manufacturer: MAXXTEC Type: IT-A-550-100-V Year of construction 2001 550 kW 350°C 540 l Diameter approx. 1700 mm Dimensions: approx. 3000 x 1700 x 4500 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.
used
Inlet opening: approx. 500 x 700 mm Rotor width: approx. 700 mm Rotor diameter: approx. 1000 mm Stator knives: 2 Rotor blades: 10 Drive: 110 kW
used
Inlet opening: approx. 1000 x 1700 mm Rotor width: approx. 700 mm Rotor diameter: approx. 1000 mm Stator knives: 2 Rotor blades: 10 Drive: 110 kW
used
CATALOG NUMBER 6631 TECHNICAL DATA - 285x305mm loading hopper inlet - 7.35kW engine - number of knives 3pcs + 2 counter knives - knife size 300x75mm - sieve (2 types) 10mm, 8mm - diameter of the extraction nozzle 100mm - dimensions length / width / height 1070x900x1980mm - weight 613 kg ADVANTAGES - Swedish production - additional sieve - very good condition - used chipper Net price: PLN 22900 Net price: EUR 5089 Net price, calculated at the rate of 4.5 PLN / EUR (with greater fluctuations in the rate, the price may change)
new
HOT AIR GENERATOR by wood . NEW machines in prompt delivery model F28 , F55CV , F85CV , F120CV Availability : ready in stock ( unless sold ) CE mark : Yes Declaration CE : Yes Instruction Manual ( Yes )
new
HOT AIR GENERATOR by wood . NEW machines in prompt delivery model F28 , F55CV , F85CV , F120CV Availability : ready in stock ( unless sold ) CE mark : Yes Declaration CE : Yes Instruction Manual ( Yes )
used
I sell the wood dryers NARDI for 30m3 wood. Control panel Nardi, a savings computer. Volume net wood 25-30 m3. 4 fans side by side Chamber 9x4x h.3m Door on each side, flow system. Without rails. Condition very good, worked very little Car, electrics and fans without any problems. Available same. Already dismantled.
used
Stencil lathe Manufacturer: Hempel Model: HH 9 Heavy-duty version with oil-hydraulic control Max.: Workpiece length: 900mm Hydraulic sliding supports: 5 pcs.
used
– German production –DTR TECHNICAL PARAMETERS: width 400 mm height 120 mm rotor diameter 430 mm rotor length 430 mm engine power 37 kW motor power 2 x 2.2 kW number of knives 2 pieces sieve 60 x 60 mm two lower toothed shafts upper toothed shaft tray length 4900 mm wood chip chute with sieve transport dimensions (L/W/H) 850 / 245 / 220 cm weight ~ 2500 kg
used
- German production - autorewers - for the production of technological wood chips - powerful shaft with a diameter of 650 mm TECHNICAL PARAMETERS: - slot width 550 mm - inlet height 260 mm - two knives - engine power 110 kW - conveyor length 5000 mm - sieve 50 x 50 mm - three upper shafts pulling toothed - four lower shafts pulling toothed - rotor width 650 mm - rotor diameter 650 mm - hydraulic lifting of feed shafts - feeder height from the base 1100 mm Transport dimensions 1100x245x240 cm weight about 10 t
used
– after technical inspection – German production – year of production 1999 TECHNICAL PARAMETERS: inlet hole 600 x 800 mm rotor diameter 175 mm rotor length 600 mm total power 18,5 kW number of knives 14 pieces rotatable cutting knives 30 mm x 30 mm sieve fi 15 and 12 mm AUTOREWERS HYDRAULIC DRAWER pressure drawer height 180 mm rotor rotations 80 -120 rpm extraction connection diameter fi 200 mm dimensions (L/W/H) 200 x 120 x 120 cm weight 1200 kg
used
– after technical inspection – very good condition – Austrian production TECHNICAL PARAMETERS: hopper dimensions 120 cm x 100 cm power 2 x 11 kW four shafts rotor length 400 mm rotor diameter 300 mm sieve fi 30 mm autorewers dimensions (L/W/H) 140 / 130 / 200 cm weight 600 kg
used
– after technical inspection – very good condition –documentation TECHNICAL PARAMETERS: infeed size 800 x 1000 mm rotor diameter 175 mm rotor length 800 mm rotor rotation 90 rpm V-rotor main engine 18,5 kW number of knives 18 pieces rotatable cutting knives 40 mm x 40 mm sieve fi 20 mm and 15 mm AUTOREWERS HYDRAULIC DRAWER pressure drawer height 175 mm connection diameter fi 200 mm dimensions (L/W/H) 230 / 140 / 160 cm weight 1400 kg
used
Copy lathe Brand: Röhrsdorfer model: 83 199 Year of construction: 1987 Workpiece length 100 - 460 mm Kantel dimensions: 20 x 60 mm Equipment: Workpiece magazine Turning knives Template-controlled rotary blade knife, 3x
used
SECOND-HAND HOT PRESS ORMA MOD. NPC-6/100 - New PLC with TOUCH SCREEN - Platens dimensions 2500X1300 mm - Additional plate - N. 6 cylinders - CE rules - Year 2001 - Kw 2.2 - Complete with manual and CE certificate
used
CATALOG NO. 6875 TECHNICAL DATA - inlet width 720mm - inlet height 160mm - thickness of the shredded material 160mm - roller width 720mm - shaft diameter 600mm - knife length 80mm - number of knives 4×12pcs - 25mm sieve dimensions - pressing roller at the input 0.75 kW - toothed shaft pulling from the bottom 1.8 kW - toothed shaft pulling from above 1.8 kW - length of the vibrochute 4470mm - width of vibrochute 710mm - 2.2 kW vibrating motor - main engine 55kW - autoreverse - diameter of the extraction spigot 260mm - dimensions of the vibro-chute length/width/height 4470/950/930mm - machine dimensions length/width/height 3100/1500/1170mm - total weight about 5500 kg – German production - very low mileage – original documentation – used chipper, very good / perfect condition Net price: PLN 169900 Net price: 36538EUR Net price calculated according t ...
used
vibratory feeder diameter range 1-4 mm total screw length 30-40 mm output - pieces/min 63
used
Vecoplan VTH/55/15/2 edging chipper – German production – autoreverse – for the production of technological chips – year of manufacture 1995 TECHNICAL PARAMETERS: inlet width 550 mm inlet height 130 mm two knives engine power 55 kW conveyor belt length 4300 mm sieve 50 x 50 mm toothed upper pulling shaft toothed lower pulling shaft rotor width 560 mm rotor diameter 560 mm hydraulic lifting of the feed shaft transport dimensions (length / width / height) 550 / 230 / 120 cm weight ~ 3000 kg
used
Capacity (x): 16 Process Application: 180 Other Info: 1 Number of T slots: 8 Jump from T to T: 200mm T size: 22mm Number of matching pieces:2 units Length: 850mm Width: 800mm Height: 1640mm Weight: 1800kg