134,819 used machines on RESALE, but how to find them? Machine Search
Equipped with 2 levels, Photos purely indicative Auction-ID: A3-50009-211
Circular dividing table W M W manually and electrically adjustable with 3-jaw chuck 250 mm rotary table Ø 500 mm clamping grooves 6 x 14 mm used, tested ! Dimensions: 500 x 650 x 300 mm
HT 600 Lift table Load capacity 600kg Table height min. 400mm - max. 1010mm Dimensions LxWxH approx. 1900 x 740 x 400mm Platform L 1900 x W 740mm Roller diameter 125mm Weight approx. 190kg G&STÜ-6100600
Rotary Table, Round Sectioning Table, Circular Dividing Table PAGUS Ø 250 mm Table Height: 115 mm Groove Width: 12 / 20 mm < br /> groove depth: 22 mm centering hole in the table: Ø 23 mm A drive shaft with spline shaft profile: Ø 13 / 17 mm, 4 wedges, wedge width: 4 mm used, checked! Dimensions: 500 x 450 x 155 mm
Universal clamping table, tilting and swivel table, height adjustable, T-slot plate PAGUS clamping surface: 570 x 460 mm 3 grooves groove width: 14 x 24 mm swivel 45° used, tested ! Dimensions: 660 x 460 x 280 mm
Rail guide table, linear unit STAR (REXROTH) 1460-305-00 ID-Nr 75268/1 working area approx. 0...670 mm Table: 225 x 220 mm Drive shaft: Ø 14 mm used, tested ! Dimensions: 890 x 225 x 75 mm
Cast iron control/tracing marble Length: 1700 mm Width: 700 mm Thickness: 230 mm Height on feet: 940 mm Weight: 0,8 T
Rail guide table, linear unit with drive, limit switch and rotary encoder STAR (REXROTH) 1460-305-00 stroke approx. 140 mm table: 220 x 220 mm Drive:: SIEMENS 1FT5046-1AF71-3EB0 345 V base plate & table stainless steel ! used, tested !' Dimensions: 1020 x 320 x 90 mm
used
GeneralUniversal Milling Machine; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal650 mmCross520 mmVertical475 mmTechnical DataType of main driveAC Drive power (100% DC)16 kWDrive power (40% DC)21 kWSpeed range20 - 15000 rpmSpindle taperHSK-A 63 Clamping SystemHSK-A 63 Feed rate longitudinal/transverse/vertical-42000/-42000/-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minFloor space/WeightDimensions (L x W x H)2,85 x 2,35 x 2,75 mWeight approx.7500 KgDirect measuring systemDirect path measuring system Spindle speed 15,000 rpmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 15,000 min-1 Output 21 kW / 16 kW (28 hp / 21.5 hp) Torque 111 Nm / 85 Nm (82 ft lbs / 63 ft lbs) (40 / 100 % duty cycle) NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 630 x 500mm / 24.8 x 19.6 in swivel range -35 to +110 ...
used
GeneralUniversal Milling Machine; Control: CELOS with Heidenhain TNC 640 Working area 1Longitudinal650 mmCross520 mmVertical475 mmTechnical DataType of main driveAC Drive power (100% DC)25 kWDrive power (40% DC)35 kWSpeed range20 - 20000 rpmSpindle taperSK40 Tool holder DIN ISO 7388-1-A Clamping SystemDIN ISO 7388-3-A, AD Feed rate longitudinal/transverse/vertical-42000/-42000/-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minFloor space/WeightDimensions (L x W x H)2,85 x 2,35 x 2,75 mWeight approx.7500 KgDirect measuring systemDirect path measuring system Spindle speed 20,000 rpmMotor spindle speedMASTER® SK 40 Spindle speed 20 - 20,000 min-1 At speed 18.000-20.000 min-1 SK40 – BIG-PLUS® stipulated Output 35 kW / 25 kW (47 hp / 33.5 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63.5 ft lbs) (40 / 100 % duty cycle) NC swivel rotary tableSwivel Rotary Table for simult ...
Stainless steel plastic work table PAGUS table surface: 1270 x 590 mm with perforated grid ! stainless steel frame ! replaceable shelf cable duct at the back Dimensions: 1300 x 700 x 790 mm
Light table, 2x 18W. Adjustable positions. In very good and clean condition.
table length: 1200 mm table width: 700 mm table height: 900 mm table load capacity: 250 Kg weight of the machine ca.: 36 Kg dimensions: 1,2 x 0,8 x 0,85 m Siegmund workbench incl. accessories - consisting of screw clamps, manual clamping bolts, surface clamping bolts and angle bracket - Frame made of aluminum profiles - Working height 900 mm - Surface made of aluminum table profiles - Drill hole Ø 16 mm - Hole spacing 50 mm - Hexagon groove HX8 - Hexagon groove distance 50 mm - When clamping aluminum parts, the bolts may only be tightened hand-tight. - For clamping: Manual clamping bolt 160514 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
GeneralUniversal Machining Centre in monoBLOCK construction; Control: CELOS X with Siemens SINUMERIK ONE Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minWorking area 1Longitudinal735 mmCross650 mmVertical560 mmTool changerTool changer planevertical Type of gripperDouble gripper Number of tools60 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmFloor space/WeightWeight approx.14500 KgNC swivel rotary tableTable surface Ø650 mmCentre bore 32 mmMaximum load (table centre) 600 KgSlot width 14 mmNumber of Slots 9 Distance between T-Slots 63 mmRotation speed max.4. Axis 40 rpm4. Axes (swivelling range) 360 x 0,001 degree5. Axes (swivelling range) +/- 120 degreeRotation Speed 5. Axis 20 rpmIntegrated motor spindle speedMASTER ...
used
GeneralHorizontal universal machining center; Control: CELOS X with Siemens SINUMERIK ONE Working area 1Longitudinal650 mmCross700 mmVertical950 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minCabineFull protection cabin Taper cleaning brushesTaper cleaning unit with rotating brushes for spindle taper HSK Stop block + 3-point-supportStop block + 3-point-support Design according to DECKEL MAHO Standard Package Mill / Turn HSK-A 63Package Milling / Turning: Upgrade NC-swivel rotary table to Milling - Turning / direct drive Table plate C-axis d 680 mm / 26.8 in Speed C-axis max. 1.200 min-1 Integrated balancing sensor Motor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 m Kinematics axis A / C for swivel rotary tableAxis kinematics A/C for swivel rotary table Axis designation swivel axis: ...
Rail guide table, linear unit STAR (REXROTH) 1460-405-00 ID no. 73449 Working area approx. 0...600 mm table: 450 x 320 mm Drive shaft: Ø 16 mm used, tested ! Dimensions: 1480 x 360 x 90 mm
heavy 40s Gillardon with cross table
table diameter: 160 mm table load: - table height: - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
GeneralCNC Turning Centre; Control: Control M730UM with CELOS CharacteristicsMax machining diameter356 mmMax. Turning Length705 mmSpindle bore111 mmBar diameter max.80 mmSpeed max.4000 rpmNumber of tool stations12 Rotary tool spindle speed10000 rpmMovements X / Z260/795 mmRapid feed X / Z30/30 m/minDrive power main spindle18,5/15 kWDimensions (L x W x H)3,35 x 2,11 x 2,2 (3,99 x 2,11 x 2,2) mWeight approx.6360 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 " ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and p (Spindle 1) Standard spindle 18.5/18.5/15 kW, 4,000min-1(Spindle 1) Standard Spindle 18.5/18.5/15 kW, 4,000 min-1 Max. spindle speed: 4,000 min-1 Chuck size: 10 inch., 12 inch. (8 inch. also for the 2-a ...
used
GeneralCTX beta 1250 4A Two spindle turning centre with - partial hollow clamping device for main spindle and counter spindle internal diameter of draw tube Ø67 mm (2.63 in) x 700 mm (27.55 in) deep - 2 C-axes and spindle brakes (hydr.) - 2 12 fold Sauter star turrets reception VDI 40, DIN 69880-40 with precision interface (Trifix) and tool drive connection/drive acc. DIN 5480 - Y-axis, slide I - counter spindle slide; Control: CELOS X with Siemens 840D SL Operate Headstock, leftClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWTorque (100% DC)280 NmSpeed range0-5000 rpmC-Axis Speed2000 rpmHeadstock, rightClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWTorque (100% DC)280 NmC-Axis Speed2000 rpmSlide 1Longitudina ...
Rail guide table, linear unit STAR (REXROTH) 1460-405-00 ID no. 99357 Working area approx. 0...1300 mm table: 320 x 320 mm Drive shaft: Ø 19 mm used, tested ! Dimensions: 2050 x 375 x 90 mm
turning diameter over bed: 250 mm turning diameter over slide rest: 145 mm turning length: 550 mm turning speeds: 50 - 2000 U/min centre height: 125 mm spindle bore: 26 mm tailstock quill taper MT: 2 MK connected load frequency: 230 V total power requirement: 0,75 kW weight of the machine ca.: 0,12 t dimensions of the machine ca.: 1,3 x 0,65 x 0,6 m longitudinal feed. 3-jaw chuck 125 mm. 4-way steel holder. chip tray, bulkhead Hardened bed tracks. Emergency stop switch. lining protection Tool box, instruction manual. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 290 mm turning diameter over slide rest: 170 mm turning length: 750 mm turning speeds: 75 - 2000 U/min centre height: 145 mm spindle bore: 38 mm tailstock quill taper MT: 3 MK tailstock quill stroke: 80 mm connected load frequency: 230 V total power requirement: 1,5 kW weight of the machine ca.: 0,34 t dimensions of the machine ca.: 1,3 x 0,75 x 0,7 m Longitudinal and transverse feed. 3-jaw chuck 160 mm. 4-jaw chuck 160 mm. faceplate 4-way steel holder with 4 pcs tool holders 2 pcs. bezels Machine light Drip tray Hardened bed tracks. Emergency stop switch. Feed protection Set of wheels. Machine tools. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
General- partial hollow clamping device (hydraulic), - C-axis and spindle brake (hydr.) - upper compound slide with turning-/ milling spindle, with hydraulic locking reception HSK-A63, DIN 69893 - Y-axis ±210 mm - B-axis ±120º interpolating, Torque motor - tool magazine 36-fold disc magazine, ergonomic front load - absolute, direct measuring systems in X-, Y-, Z1-axis - cooling pump 6 bar;20 l/min, - USB-interface, Ethernet-interface; Control: CELOS X with Siemens 840D SL Operate Working areaSwing diameter over guide ways700 mmTurning diameter700 mmDistance between spindles3360 mmClamping chuck diameter max.630 mmBar diameter max.125 mmMain drive 1Drive power (100% DC)40 kWDrive power (40% DC)52 kWSpeed range- 2500 rpmTorque (100% DC)1700 NmMax. torque (40% DC)2200 NmC-Axis Speed2500 rpmTorque of C-Axis (holding torque)1700 NmTurning-milling spindleSpindle taperHSK-A 63 DIN 698 ...
Rail guide table, linear unit STAR (REXROTH) 1460-305-00 ID no. 60221 working area approx. 0...380 mm table: 320 x 225 mm drive shaft: Ø 14 mm with limit switch and position sensors ! used, tested ! Dimensions: 830 x 410 x 95 mm
Inv. Num. : 8239 Type: WHN 13 CNC Producer: TOS Created: GO 2004 Parameters: Control system: MEFI X-axis travel: 3500 mm Y-axis travel: 2000 mm Travel distances Z-axis: 1200 mm
Welding Table, Straightening Table, Straightening Plate, Work Table, Clamping Table Work Table, Clamping Table, Welding Table, Machine Table GEORG 5400 mm Box profile: 160 x 90 mm Height: 760 mm Center groove over 8 profiles 40 x 25 mm Dimensions: 6350 x 1000 x 760 mm Weight approx. 4 ton
Angle table with adjustable attachment, clamping bracket, T-slot plate WMW - Consists of 2 parts. Clamping surface: 1600 x 850 x 680 / 760 mm Number of grooves: 6 Groove width: 20 / 38 mm Hole spacing at the base: 130 mm Dimensions: 1600 x 850 x 680 / 760 mm
Heating- and service table for gluing units Make: Wehrmann Type: VHT for IMA or Homag gluing units - pre-heating of gluing units for fast change - easy cleaning of the glue roll while rotating - better possibility for adjustments when fixing the gluing unit - only 1 x 400 Volt connection needed - rotating of the gluing roll is controlled by the temperature - option for 2 gluing units working parallel - different feeding systems possible - different plug systems on request possible - safety stable because of heavy construction an adjustable feets - very flexible and easy operation - small space need - safe drive by spur gear - swivel-function 7° for emptying of glueing unit prices for glue pots with bayonet adapter: for one gluing unit: EUR 7,770.00 for two gluing units: EUR Price on request Delivery time: approx. 4 weeks
used
GeneralUniversal milling and turning machining centre with duoBLOCK construction; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal800 mmCross1050 mmVertical850 mmTool changerApplicationUniversal Type of magazineWheel Tool changer planehorizontal Type of gripperDouble gripper Number of tools123 Uni milling head with controlled B axis HSK-A 63Universal milling head with controlled B axis HSK-A 63 Continuously positioning universal milling head (B axis) with integrated motor spindle for 5 axes positioning and simultaneous machining NC mill-turn table with palletNC mill-turn table with pallet number of T-slots: - 1x cross slot 14 H7 / 0.55 H7 - 12x star slots 14 H11 / 0.55 H11 / 22.5° max. table speed milling operation: 30 rpm turning ...
Universal clamping table, swivel, tilt and swivel table, T-slot plate PAGUS clamping surface: 630 x 270 mm 5 grooves groove width: 12 mm table can be tilted back and forth from 90°, tilted back and forth by 30° table can be tilted left and right by 15° and swivelled to the left and right by 45° New !' Dimensions: 650 x 290 x 290 mm
Magnetic clamping table, electric PAGUS Ø 500 mm outer diameter: Ø 500 mm Operating voltage: 24 V DC current consumption: 6,00 mm 2 A Insulating surface: Ø 55 mm Contact diameter: Ø 16 mm Contact spacing: 28 mm Flange diameter: Ø 235 mm Bolt circle diameter: Ø 270 mm 4x Threaded hole: M16 x 2.0, depth: 28 mm used, tested ! Dimensions: 500 x 500 x 90 mm
description: The rejection table can be used after any kind of bottle control (filling height control, empty bottle inspector). The defect bottles will be rejected with a pusher. The station was connected to a Heuft filling height control. Puscher or Inspector are not included in this position. availability: in stock width: ca. 1000 mm length: ca. 3800 mm Installation dimension: ca. 3800 mm x 1600 mm transport size: ca. 3800 x 1600 mm Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy ma ...
Auction-ID: A7-50677-1009
2022 Diebels RMH Con Sort III Wet cutting table Technical data: Drive power [kW]: 2.6/32 CEE plug Separating area LxW [mm]: 1270 x 710 Lightweight discharge area [mm]: 1270 x 710 Number of water pipes [pcs]: 5 Number of water nozzles [pcs.]: 18 Water tank volume [litres]: 400 Electrical connection [V/A]: 400 / 32 CEE plug Weight [kg]: 750 Dimensions (without tank) LxWxH [mm]: 2500x1010x1120 Speed control in 3 stages via potentiometer on the control cabinet VA water tank with waste water pump Automatic water level control via Quick stop Operational hours: 100 hours. The separate water tank with filter was adapted by us to this system and would also be included in the sale if desired. This also applies to the table frame. Find more here - .ucymachines/ Contact us at - sales@ucymachines
Coordinate table - rotatable BAZUS Table size 700 x 400 mm Clamping area 330 x 580 mm 3 T-slots 12 mm Travel distance approx. 400 mm Scaling 0.05 mm 1 spindle rotation = 4 mm swivel 360° with locking mechanism Overall height 195 mm Max. table load approx. 100 kg max. working pressure approx. 500 kg Dimensions L - 850 x W - 400 x H - 195 mm Weight approx. 172 kg original packaging - year of construction estimated - New - unused - - 1 piece in stock -
used
Offer 24518 Specifications: - Load capacity 150 kg - Pick-up crosses + mounting bolts - Height of mounting bolt in horizontal position 1350 mm - Diameter of mounting bolt 55 mm - Rotary movement infinitely variable - Right.- Counterclockwise rotation - Drive 400 V / 3.0 kW - Height of mounting bolt in horizontal position 1350 mm - Space requirement approx. W 600 x D 1200 x H 1350 mm - Weight approx. 150 kg
used
Offer 24508 Specifications: - Load capacity 100 kg - Face plate diameter 500 mm - Passage opening 155 mm - Manual face plate infinitely variable left + right tilt - Rotational movement infinitely variable mot. Adjustable - Right + Left Rotation - E.- Footswitch for start - stop - Table height in horizontal position approx. 940 mm - 3 cheek chuck - Drive 220 V - Space requirement approx. W 750 x H 940 x D 750 mm - Weight approx. 100 kg
Specifications: Clamping plate dimensions: 2050 x 1000 mm Panel thickness: 170 mm T-slots: 15 / 25 mm Dimensions (length x width x height): approx. 2050 x 1000 x 170 mm The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.
maximum number of results exceeded
please refine your search
50 € 
