wood table used for sale

spindle diameter: 125 mm x-travel: 3000 mm y-travel: 1500 mm control: Heidenhain TNC 355 taper ISO: 50 w-axis: 600 mm Table dimensions: 1200 x 1500 mm table load: 5 t spindle turning speed range: 12 - 2300 U/min voltage: 380 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 120 mm x-travel: 1800 mm y-travel: 1300 mm z-travel: 1500 mm taper ISO: 50 Table dimensions: 1120x1400 mm number of spindle speeds: 0-1.000 total power requirement: 13,2 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: . mm x-travel: . mm y-travel: . mm table length: 2000 mm table width: 2000 mm table load: 25 t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 100 mm x-travel: 1600 mm y-travel: 1120 mm z-travel: 1250 mm Table dimensions: 1250 x 1250 mm tool adaptor: MT 6 spindle turning speed range: 7,1 - 1120 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Outriggers Facing head D.R.O. Acurite ISO 50 adapter Spindle support The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1350 mm plate thickness: 5 mm cutting angle: 2,3 ° table width: 530 mm table height: 830 mm back stop - adjustable: 750 mm no. of strokes: 29 Hub/min total power requirement: 7,5 kW weight of the machine ca.: 1100 kg dimensions of the machine ca.: 1,93 x 2,2 x 1,28 m Basic equipment: - Engine. Behind stop with NC control and 750 mm adjustment - 1000 mm long measuring stop with T-slot and stopper - Foot pedal with emergency stop switch - Arm in front for material - Cutting line lighting - Hand and foot protection front and rear - piece counter Options: - Pneumatic lifting device - Optical safety bar - Miter device with adjustable - angle 0-180 ° All other sizes can be found on the RS-Sperling Website. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2050 mm plate thickness: 3 mm cutting angle: 1,5 ° table width: 510 mm table height: 820 mm back stop - adjustable: 600 mm no. of strokes: 35 Hub/min total power requirement: 3 kW weight of the machine ca.: 1900 kg dimensions of the machine ca.: 2,64 x 2,06 x 1,21 m Basic equipment: - manual backgauge with 600 mm travel - Measuring stop 800 mm - Foot pedal with emergency stop switch - Bracket arms in front for workpieces - Cutting line lighting - Protective demarcation OPTIONS: - Pneumatic sheet metal lifting device - Optical safety bar - Miter device with adjustable - angle 0-180 ° - engine. Backgauge with NC control and 750 mm travel - engine. Backgauge with NC control and 1000 mm travel - piece counter More sizes at info @ rs-sperling .de The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1550 mm plate thickness: 6 mm cutting angle: 2,5 ° table width: 510 mm table height: 830 mm back stop - adjustable: 750 mm no. of strokes: 29 Hub/min total power requirement: 7,5 kW weight of the machine ca.: 2,5 kg dimensions of the machine ca.: 2,1 x 1,2 x 1,28 mm Basic equipment: - Engine. Behind stop with NC control and 750 mm adjustment - 1000 mm long measuring stop with T-slot and stopper - Foot pedal with emergency stop switch - Arm in front for material - Cutting line lighting - Hand and foot protection front and rear - piece counter Options: - Pneumatic lifting device - Optical safety bar - Miter device with adjustable - angle 0-180 ° All other sizes can be found on the RS-Sperling Website. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1050 mm plate thickness: 6 mm cutting angle: 2,5 ° table width: 530 mm table height: 830 mm back stop - adjustable: 750 mm no. of strokes: 29 Hub/min total power requirement: 7,5 kW weight of the machine ca.: 1800 kg dimensions of the machine ca.: 1,35 x 2,20 x 1,28 m Basic equipment: - Engine. Behind stop with NC control and 750 mm adjustment - 1000 mm long measuring stop with T-slot and stopper - Foot pedal with emergency stop switch - Arm in front for material - Cutting line lighting - Hand and foot protection front and rear - piece counter Options: - Pneumatic lifting device - Optical safety bar - Miter device with adjustable - angle 0-180 ° All other sizes can be found on the RS-Sperling Website. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Clamping bloc 1100 x 300 x 400 mm

Clamping bloc 1100 x 300 x 400 mm

Clamping bracket 500 x 460 x 1450 mm

Clamping bracket 500 x 460 x 1450 mm

table diameter: 1525 mm table load: 5,0 t swivelling range: 135° deg. table rotating: 360° deg. table turning speeds: 0,05 - 1 U/min height adjustment: mm table drive: 1,5 kW total power requirement: kW weight of the machine ca.: 2,6 t dimensions of the machine ca.: 1,80 x 1,54 x 1,20 m Adjustable rotating speed Remote controller with 5 meter cable length Digital speed indicator on the controller panel for monitoring rotation Welding – chassis mechanism Mechanical angle indicator (for tilting movement) Motors with brake & forced fan cooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Clamping bracket 1000 x 1200 x 1800 mm

Clamping bracket 1000 x 1200 x 1800 mm

length: 1800 mm width: 640 mm height: 500 mm

length: 1800 mm width: 640 mm height: 500 mm

table length: 1800 mm table width: 2000 mm table load: 15 t total power requirement: 8 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 1000 mm width: 1000 mm height: 2000 mm

length: 1000 mm width: 1000 mm height: 2000 mm

spindle diameter: 100 mm travel -x axis: 2000 mm travel -y axis: 1200 mm travel -z axis: 1000 mm spindle stroke - max.: 500 mm table surface area: 1250 x 1250 mm table rotating: 360 ° max. table load: 8000 kg spindle taper ISO: 50 spindle turning speed range: 30 - 1300 U/min feeds: 2 - 1000 mm/min rapid traverse: 6 m/min drive capacity - spindle motor: 14 kW coolant: voltage: 380 V control: Bosch1-OSA One direction thrust bearing: total power requirement: 15,0 kW weight of the machine ca.: t dimensions of the machine ca.: 4,20 x 3,00 x 3,00 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 110 mm x-travel: 1950 mm y-travel: 1600 mm w-axis: 1000 mm spindle turning speed range: 5,6 - 1120 (27x) U/min table load: max. 5-8 t voltage: 380 V total power requirement: 25 kW weight of the machine ca.: . t dimensions of the machine ca.: 1400 x 1600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 100 mm x-travel: 1250 mm y-travel: 900 mm z-travel: 1000 mm w-axis: 630 mm table load: 3 t Table dimensions: 1000x1120 mm voltage: 380 V taper ISO: 50 P.D.B. control: Heidenhain TNC 135 total power requirement: 15 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mm x-travel: 2000 mm y-travel: 1400 mm z-travel: 1400 mm spindle taper ISO: 50 table surface area: 1000x800 mm table load: 12 t number of spindle speeds: 8-1650 U/min digital readout: total power requirement: 12 kW weight of the machine ca.: 9 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 115 mm x-travel: 2000 mm y-travel: 2000 mm z-travel: 2000 mm Table dimensions: 1600x1800 mm taper ISO: 50 total power requirement: 13/19 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 102 mm x-travel: 1600 mm y-travel: 1200 mm z-travel: 1500 mm w-axis: 700 mm Table dimensions: 1250x1400 mm number of spindle speeds: 8-1600 Control: Heidenhain TNC 131 total power requirement: 15 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 102 mm x-travel: 1600 mm y-travel: 1210 mm z-axis: 1475 mm spindle travel: 710 mm B-axis (table): 360 ° Table dimensions: 1250x1400 mm Table load: 3500 kg T-slots: 22H7 T-slot - distance: 125 mm spindle turning speed range: 4-1600 U/min spindle drive: 16,5 kW Control: total power requirement: 47 kW weight of the machine ca.: 9,25 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2000 mm y-travel: 1600 mm z-travel: 1000 mm module: Siemens 850M mm w-axis: 600 mm b-axis: 360 ° spindle taper ISO: 50 Torque: 2350 Nm output: 40 kw spindle turning speed range: 28-2800 U/min : max 7 bar Feed: 1-3000 mm/min b-axis: 2,7 U/min size of pallet: 1500x1500 mm table load: 8 t T-slots: 22H7x 22 mm Tief flute distance: 200 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 150 mm x-travel: 2005 mm y-travel: 1860 mm z-axis: 1620 mm w-axis: 706 mm control: Siemens 840 C SW5.1 turning speeds: 2500 U/min surface area: 2500 x 2000 mm spindle taper ISO: 50 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m SK50 tool holder The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 90 mm x-travel: 1250 mm y-travel: 1200 mm Table dimensions: 1000 x 1120 mm w-axis: 700 mm tool adaptor: ISO 40 spindle turning speed range: 28 - 1400(x18) U/min z-travel: 1600 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 90 mm x-travel: 1250 mm y-travel: 1120 mm z-travel: 1400 mm w-axis: 710 mm spindle turning speed range: 28 - 1400(x18) U/min tool adaptor: MT 5 Table dimensions: 1000 x 1120 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Facing head, 3 axis digital read out, spindle support and tailstock. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 125 mm x-travel: 2800 mm y-travel: 2000 mm z-travel: 2500 mm number of spindle speeds: 3,55 - 710 (27x) taper ISO: 50 voltage: 400 V total power requirement: 18,5 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 102 mm x-travel: 1600 mm y-travel: 1000 mm z-travel: 1600 mm Control: Heidenhain type: TNC 410 table surface area: 1000x1120 mm Table load: 3000 kg spindle stroke: 710 mm spindle turning speed range: 4-1600 U/min main drive motor: 13 kW total power requirement: kW weight of the machine ca.: 12 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 132 mm x-travel: 2000 mm y-travel: 1350 mm z-travel: 2340 mm table surface area: 2000x1500 mm spindle stroke: 1000 mm turning speeds: 3,5-1000 U/min Radial face slide: 600 mm Radial face slide: 3,5-100 U/min Feed: 2250 mm/min spindle taper ISO: 50 Table load: 15000 kg total power requirement: kW weight of the machine ca.: 24,5 t dimensions of the machine ca.: 6,3x5x3,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 150 mm x-travel: 2500 mm y-travel: 1600 mm z-travel: 1000 mm spindle taper ISO: 50 turning speeds: 4-1120 U/min Feed: 5-2000 mm/min bore spindle stroke: 580 mm main drive motor: 45 kW table surface area: 1600x2000 mm table load: 12,5 t Control: Heidenhain type: TNC 410 Angle head: chip conveyor: workpiece weight: 15000 kg total power requirement: 80 kW weight of the machine ca.: t dimensions of the machine ca.: 6,5x5x5x4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

scissor lift table work table lifting platform lift table lifting platform Type: HD1000 Load capacity: 1000 kg Platform dimensions: 1.3 x 0.82 m Lifting height: 1.78 m Height retracted: 0,305 m Motor power 1.5 KW 400 V with remote control Other versions and optional extras available (see list) For other data, finishes, optional extras; Please inquire about delivery times and availability. Subject to prior sale, all information is subject to change. The machines can be picked up by the buyer or shipped by a forwarding agent at the expense of the buyer. Loading or packaging can be organized by us. The shipping costs are a guideline, depending on the distance and unloading option, they may vary, please inquire.

sheet width: 3000 mm plate thickness: 10 mm distance between columns: 3300 mm total power requirement: kW weight of the machine ca.: 15 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 110 mm x-travel: 2000 mm y-travel: 1700 mm Control: Fanuc spindle taper ISO: 50 z-travel: 1400 mm Table area: 1250x1500 mm Table load: 5000 kg spindle turning speed range: 35-3000 U/min Tool changer: 60 chip conveyor: covers for slideway: total power requirement: 18,5 / 22 kW weight of the machine ca.: . t dimensions of the machine ca.: 1250 x 1500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mm x-travel: 1800 mm y-travel: 1500 mm z-travel: 1700 mm w-axis: 915 mm Table dimensions: 1219x1245 mm table load: 5 t/ 9 t t number of spindle speeds: 5-1500 Control: G+L 8000A clamping table: 2 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mm table width: 1800 mm table load: 12,5 t table adjustment - longitudinal: 1.250 mm table rotating: 360 Grad table positioning: 4 x 90 ° feeds - longitudinal: 0,63 - 2.000 mm/min total power requirement: 4 kW weight of the machine ca.: 7,6 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 700 mm table width: 700 mm table height: 630 mm power capacity: kW weight of the machine ca.: 0,65 t dimensions of the machine ca.: 0,9 x 0,8 x 0,7 m partial adjustable cube table - 30° in mint condition, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 400 mm workpiece weight: 315 kg table height: 360 mm max. height (90° position): 635 mm height of the swivelling axis: 240 mm distance table center - swivel center: 485 mm center bore: 40 mm rotation movement: 360 ° reading accuracy of turning index: +/-4 ° swivel movement: 90 ° power capacity: kW weight of the machine ca.: 0,31 t dimensions: 850x450x360 mm • new-valued, manual operated, swivelling rotary indexing table, • H4 = indicating system for circular movements 0 - 360 ø +/- 4 above optic, • S20 = indicating system for swivelling movements 0 - 90 ø +/- 20 above scale ring, • B = manual operation for 0 - 360 ø, • B = manual operation for 0 - 90 ø, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 80 mm x-travel: 1100 mm y-travel: 750 mm z-travel: 1350 mm surface area: 1000 x 1000 mm total power requirement: 6 kW weight of the machine ca.: 5 t dimensions of the machine ca.: 5x3x3 m • 3-axis-D.R.O. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 31 Positionen weight: 35 kg 6 pcs. Screw clamps 10 pcs. Quick-clamping bolt 2 pcs universal stop 100mm 4 pcs. Universal stop 150mm 2 pcs. Universal stop 225mm 2 pcs. Stop and clamping angle 175mm 2 pcs. Prisms 60mm 1 pc. Burner holder 2 pieces of separating lotion 500ml, on a natural, biological basis 2 pcs. Welding table cleaner 500ml, on a natural, biological basis The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 29 Positionen : 16 mm condition: neu weight: 11 kg Set 1 29 pieces, 16mm system, consisting of: Clamps: 4 x 160610 Bolt: 12 x 160511 Stop: 4 x 160420.N Angle: 4 x 160108.N Angle: 4 x 160110.N Accessory set. 1 x 163999 Price plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mm table width: 1000 mm table height: 850 mm Vertikal stroke: 40 mm weight of the machine ca.: 0,38 t dimensions: 2,0 x 1,0 x 0,9 m Welding table SIEGMUND Professional 750 + plasma nitrided is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 11.5 - 13.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, parallel hole arrangement in a 25 mm grid on the sides. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mm table width: 800 mm table height: 850 mm Vertikal stroke: 50 mm weight of the machine ca.: 0,35 t dimensions: 1,2 x 0,8 x 0,9 m Welding table SIGMUND Professional 750 + Plasma-nitrided is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm grid on the table top parallel hole arrangement in 50 mm grid on the sides. Incl. Foot basic equipment. Pictured accessories optional. Price indication plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 250 mm turning diameter over slide rest: 130 mm turning length: 700 mm turning speeds: 115 - 1620 U/min centre height: 125 mm spindle bore: 27 mm tailstock quill taper MT: 2 tailstock quill stroke: 40 mm metric threading: 0,2 - 3,5 mm thread - inch: 8 - 56 inch. thread - module: 0,2 - 12,5 mm swival range +/-: Oberschlitten 45 ° connected load frequency: 400 V total power requirement: 0,75 kW weight of the machine ca.: 0,15 t dimensions of the machine ca.: 1,41 x 0,61 x 0,41 m Equipped with - 2-axis digital measuring system with position indicator - manufactured according to DIN 8606 - 27 mm spindle passage - adjustable guideways by adjustable strips - Strong engine with 0.75 kW - High resolution of the axis spindles for exact positioning Delivery: 3-jaw chuck 100 mm, change gear set, splash guard 3-axis digital measuring system fully assembled. The data for ...

table length: 2000 mm table width: 1000 mm table height: 900 mm table load: 3000 Kg weight of the machine ca.: 0,45 t dimensions: 2,0 x 1,0 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 250 mm turning diameter over slide rest: 130 mm turning length: 700 mm turning speeds: 115 - 1620 U/min centre height: 125 mm spindle bore: 27 mm tailstock quill taper MT: 2 tailstock quill stroke: 40 mm metric threading: 0,2 - 3,5 mm thread - inch: 8 - 56 inch. thread - module: 0,2 - 12,5 mm swival range +/-: Oberschlitten 45 ° connected load frequency: 400 V total power requirement: 0,75 kW weight of the machine ca.: 0,15 t dimensions of the machine ca.: 1,41 x 0,61 x 0,41 m Equipped with - 2-axis digital measuring system with position indicator - manufactured according to DIN 8606 - 27 mm spindle passage - adjustable guideways by adjustable strips - Strong engine with 0.75 kW - High resolution of the axis spindles for exact positioning Delivery: 3-jaw chuck 100 mm, change gear set, splash guard 3-axis digital measuring system fully assembled. The data for ...