wood shredder used for sale

Opening: 700 x 345mm. - Shaft distance: 132mm. - With 15KW E.Motor.

used shredder Manufacturer: JENZ Type: AZ 660-168-EL-200kW Year of Make: 2009 Specifications: Insertion opening: approx. 4,500 (3,500 + 1,000) x 1,500 mm Drive power: 200 kW Capacity: approx. 200 m³/h Passage: approx. 660 mm Machine dimensions: approx. 11,250 x 8,000 length x width Machine weight: 18.2 t incl. frame, leak belt and overbelt magnet with bracket More information will follow. Machine will be available around February 2026.

With overhauled rotors. Included hydraulic-unit and control panel build in container. With conveyor for outlet.

Included hydraulic-unit and control panel build in container. With conveyor for outlet.

- With tape - 470 x 150 high entrance - With material collection drawer - Printed picture - Documentation with certificate

System includes a Vecoplan shredder, a scraper chain conveyor, and a lifting-tilting device with safety guard, the system was used for recycling plastic, 1) Vecoplan shredder VIZ 1300 S, with hood-type feed hopper, base frame, discharge electrode, scraper chain conveyor, lifting-tilting device, feed length: 1250mm, feed width: 1300mm, type: electric motor with V-belt drive, rated motor power: 90kW, rated motor current: 169A, motor speed: 750/min, protection class: IP55, rotor diameter: 495mm, number of cutting crowns: 87 pcs., dimensions of cutting crowns: 40x40mm, rated rotor speed: 185/min, rotor speed range: 95-265/min, screen hole diameter: 40mm, drive side: right (standard), overall length: approx. 2850mm, overall width: 2515mm, overall height: approx. 1350mm, weight: approx. 7200kg, 2) Scraper chain conveyor, trough width: 500mm, section length: 2700mm, screw diameter: 315mm, screw ...

Manufacturer: ERDWICH Model: M600/1-400 Year of Manufacture: :2022 Condition: As new / barely used Operating Hours: 5 hours Complete machine as shown in the pictures and drawings (including control unit/switch cabinet, feed area, and access platform) Find more here - / Contact us at -

Lindner Jupiter 3200 low-speed single-shaft pre-shredder incl. hydraulic unit and control cabinet Mileage: 54,000 BH Year of Make: 2008 Machine was regularly serviced and repaired Application: Fragmentation of commercial and. industrial waste,

Manufacturer: KOMPTECH Model: Crambo 5200 Year of Manufacture: 2015 Type of Machine : slow-speed shredder Operating hours: Approx. 14,000 hours Condition: - Used, good condition consistent with operating hours - Commercially operated - Regularly serviced and maintained (checkbook service) Chassis: - Trailer / 3-axle chassis, transportable - Road approved - TÜV valid until 03/2026 Engine and drive: - 328 kW / 460 hp diesel engine - CAT engine with mechanical drive - Machine weight approx. 27 t Applications: Suitable for roots, green waste, waste wood, stem wood, organic waste Equipment and features: - Overbelt magnet - Remote control - Armored shredding rollers - Rollers in very good condition with low wear - Fixed tools - Roller speed: 22 rpm / 34 rpm - Screen baskets: 220 mm x 140 mm - Standard paint finish - Throughput up to approx. 80 t/h - 3-axle running gear - Mechani ...

Corrugated cardboard shredders (mats) Type: 55422118 Year of manufacture: 2018

A large-format single-shaft shredder Vecoplan is available. Rotor diameter: 370mm, effective rotor length: 1300mm, speed: 120rpm, knife rows: 37, knife dimensions X/Y: 40mm/40mm, feed opening X/Y: 1400mm/1300mm, hopper volume: approx. 3m³. Machine dimensions X/Y/Z: 3200mm/2400mm/1500mm, weight: approx. 5500kg. An on-site inspection is possible.

Manufacturer: Lindemann Model: Lubre 400t Year of Manufacture: 1990 Condition: good They have already done all service of the machine : - New hydraulic joystick controls for machine operation - New hydraulic oil - New hydraulic hoses and pipes - Hydraulic cylinders for rams - New cutting knives - Remote control for machine movements - New metal electrical enclosures - Find more here - / Contact us at -

Manufacturer: Hammel Model: NZS 1000 Year of Manufacture: 2012 Operating hours: approximately 3,000 hours Undercarriage: crawler chassis (tracked mobile) It has two built-in magnets Find more here - / Contact us at -

A Burghardt cardboard shredding machine is available. Cutting width: 320mm, max. cardboard thickness: 12mm, throughput capacity: approx. 2m³/h, operating speed: 10m/min, motor power: 0.75kW, machine dimensions X/Y/Z: approx. 500mm/600mm/650mm, weight: approx. 100kg. Documentation vorhanden. An on-site inspection is possible.

Very good condition four-shaft shredder UNTHA RS-30 The machine is located in a container with a discharge belt/articulated belt as a chain belt conveyor. Easy to transport, can be moved with a hook dispenser. Easy access to the container, wide inspection door. A very nice facility in a well-kept condition First Hand Machine! Operating hours only: 4,307 h Year of manufacture: 07.2019 Power: 2 x 11 kW Cutting opening L x W 420 x 560 mm Knife width: 18 mm Built-in strainer: Ø mm Electrical cabinet : complete with control Funnel Discharge belt Containers

GT-5290 Ripper - Brand: SCOINER - Model: 150/1300/100 - With horizontal hydraulic pusher and vertical hydraulic pusher - Rotor length: 1450 - Diameter: 500 - Engine: 100 hp (75 kw) - Dice: 30x30 - With hopper - With electric control - Year: 2000

Manufacturer: Lindemann Model: LU800 / 8P A60 Year of Manufacture: 1994 Hours: 46,900 (currently still running) - Blade width 80x80 - Box length - Bed dimensions: 5.80 meters long / 2 meters wide - Drive power: 4 motors from Schoch GmbH No. 9140231/9, year 1994, 90 kW each - Lindemann Scissors Find more here - / Contact us at -

A single-shaft shredder Erdwich for contaminant-free red brass and brass chips is available. Cutting unit dimensions X/Y: 600mm/500mm, height: 300mm, knife width: 25mm, screen hole diameter range: 25mm-35mm, machine dimensions X/Y/Z: approx. 1600mm/650mm/800mm, weight: approx. 600kg. Documentation available. An on-site inspection is possible.

Shredder of the leading company LINDNER model: KOMET 1800 single shaft number of knives 50pcs. Ideal for SRF/RDF (paper, plastic, fabric, wood), accompanied by the electrical panel and the control panel. Drive motor: 200Kw ABB 400V/50Hz Hydraulic unit: Dorninger-Heavy Duty 1:65lt/min ,Drive Capacity:11Kw The machine is in excellent condition, being sold due to replacement with a new more advanced model.

Main Machine - ZERMA ZPS 2000 - Type: single shaft shredder (Einwellenshredder) - Drive power: 2 x 55 kW - Frequency converter: included (1 unit) Conveying Equipment Included - Discharge Belt Conveyor - Type: WF 4000 x 2500 x 580 - Drive: 1.5 kW - Inclined Belt Conveyor (mounted at shredder) - Belt width: 980 mm - Centre distance: 5000 mm - Belt type: PVC with cleats - Safety features: emergency stop rope and safety stop - Drive (right-hand): 1.5 kW Spiral Conveyor - Type: HS 450 NW 560 - Manufacturer: BULCOTECH - Drives: 0.75 kW / 11 kW / 5.5 kW / 11 kW Magnetic Separation - Drum Magnet (1 unit) - Overhead belt magnet: DM01.60 - Design: ferrite - Drive: 1.5 kW - For belt width: 600 mm Find more here - / Contact us at -

Manufacturer: HAAS Model: TYRON 1500 E Year of Manufacture: 2014 Machine Type : stationary electric twin shaft primary shredder Tool configuration: special reinforced tooling, 4-part with 7/6 discs per shaft Shaft speed: infinitely variable, approx. 0 to 32 rpm Counter-comb bar: included Raised tipping hopper: included Drive Unit - Drive power: 2 x 90 kW - Central lubrication: for all 4 main bearings Electrics / Control - Display: IFM display - Remote control: radio remote control included - Shredding programmes: 4 pre-set programmes (wood, waste, special, green waste) Discharge Conveyor - Discharge conveyor: included Find more here - / Contact us at -

We are selling a shredding and processing system for printer toner cartridges. The system is also suitable for processing small and medium-sized waste electrical and electronic equipment (WEEE).It was only in operation for five years and has already been professionally dismantled. This shredding and processing plant for toner cartridges was developed to efficiently separate valuable materials and reuse them in the recycling process. Through the use of high-performance machinery and intelligent separation technologies, this line enables the sustainable and economical recovery of metals and plastics from toner cartridges.The process consists of several stages: First, the modules are shredded, then sorted and finally separated in order to optimally process the different material fractions. Machines and processes of the plant. 1. Feed dispenser with big bag unloading station – length 5  ...

Goose neck shaped conveyor belt, Dimensions : 3,5 m. on floor mm. 2,2 m. horizontal + 1,18 m.inclined Angle 45° 1.166 mm discharging point, machine as new, used for test only Approx.450 mm working width Complete with transport paddles 1,5 kw gear motor Fitted with a 250 mm diam.magnetic drum at the end. Separate discharging outlet for extracted ferrous material, This machine was mounted under a 1500 WLK shredder, conditions: as new, type: extraction belt

COMAFER grinder model MAC 500: – hourly production from 100 to 200 kg/h – 10 HP, 380 volt motor – 965x500 mm inlet – overall dimensions 1.7 m x 1 x h=1.5 m – weight 800 kg – year 1997, in accordance with CE standards

Code: 0307 Brand: COMAFER Model: MAC 300 - CE Standard Grinding machine for wood waste, plastic materials, cardboard, packaging, and other materials - CE Standard Technical data: Grinding inlet mm 680 x 500 Knife roller diameter mm 130 Knife roller lenght mm 450 N° 30 reversible sharpened knives Motor power Hp 5,5 Suction system diameter mm 150 Overall dimensions: mm 1300 x 900 x 1400 h Weight kg 600

Twin-shaft shredder, 380 volt power supply, ideal for plastic, wood, iron chips, paper. Loading mouth 620 x 570 mm, working area 350 x 300 mm, never used 0 hours Overall dimensions: 1500 x 1000 x 1500 mm Weight: 1000 kg Auction-ID: A7-44803-138

Twin-shaft shredder, 380 volt power supply, ideal for plastic, wood, iron chips, paper. Loading mouth 620 x 570 mm, working area 350 x 300 mm, never used 0 hours Overall dimensions: 1500 x 1000 x 1500 mm Weight: 1000 kg MACHINERY WITHOUT CE MARKING, NOT COMPLIANT WITH EU DIRECTIVES, INTENDED EXCLUSIVELY FOR NON-EU MARKETS Auction-ID: A7-44803-56

AGICOM recycling machines: Used single-shaft shredder MR2260 The used single-shaft shredder MR2260 is a powerful and energy-efficient shredder for the pre-shredding of cables, electronic waste, waste plastics, wood and much more... It has two stator knives for better product quality and higher hourly output. The shredder is equipped with an electronic control system. This monitors the hydraulic feed and the cutting shaft. As a result, the single-shaft shredder rarely has to reverse and retains its high throughput. Cooling is included. Year of manufacture: 2019, Machine in good condition. Ready for immediate use! Number of blades: 23 + 2 (rotor + stator) Rotor length: 600 mm Electric motor: Siemens 19.0 kW + 2.2 kW, 400 V Control: Siemens Dimensions: approx. 1750 x 1300 x 1800 mm Capacity: max. 200 – 400 kg/hour Safety: retraction of the feed in the event of overload, re ...

Chopper / universal / mill NAGEMA-FeumaProduct descriptionManufacturer: Nagema VEB Feuma GössnitzType: HU-1Year of construction: 1981Condition: used, baker's conditionOn wheels, mobileDetails see pictures.

Food processor / universal - food processor NAGEMA HU-1 Product description Manufacturer: Nagema VEB Feuma Gössnitz Type: HU-1 Year of construction: 1982 Condition: used, bakery condition On castors, mobile Details see pictures.

ID3749 Doppstadt Inventhor 9 year/Baujahr 2019 approx. 4.180 hours/hours 32 t Pre-shredder, roller length 3,000 mm Pre-shredder, roller length 3,000 mm

FELLOWES 225Ci document shredder, large stand-alone unit

Cutting sieve, shredder sieve, sieve basket, sieve for chopper, shredder system, single-shaft shredder, shredder, granulator, shredding machine -Perforation: 65 x 65 mm -Recording holes: Ø 75/30 mm -with supporting ribs -Drawing with the pictures -Dimensions: 1600/1844/H620 mm -Weight: 696 kg

agicom recycling machine trade: The used single-shaft shredder from Tecnoecology is extremely powerful and is ideal for shredding cables, but also for composites and plastics. Equipment: hydraulic pusher. Number of blades: 7+8 (rotor + stator) Rotor speed: 130 rpm Cutting rotor: Ø 180 mm - 500 mm Electric motor: 17.0 kW, 380 V Weight: approx. 1,200 kg Dimensions: approx. 1540 x 1150 x 1700 mm Throughput: max. 200 - 400 kg/hour Safety: retraction of the feed in the event of overload, reverse rotation of the rotor in the event of blockage

Shredder for waste wood and biomass, 2-stage ( stage 1 = Doppstadt DW 3060 buffalo ---- level 2 = AK 630 ), 2 large magnets INCLUDED, air classifier on the discharge belt included. Completely ready for use. Engine (Volvo approx. 700 hp / 515 KW

Bio shredders/ mixers Seko Constellation 6000/200ME Electrically powered stationary organic shredder/mixer for processing garden waste, cellulosic waste, organic waste, market waste, green waste, etc. for composting Power: 180 KW Total weight: 11,100 KG Basic equipment: • Branch gearboxes with planetary gearboxes and electric motors • With control console to start the machine at full load • Automatic gearbox control and reversal of the chopping unit • Hopper made of wear-resistant steel • Spiral chopping shafts made of wear-resistant steel • Chopping blade made of high-strength steel • Replaceable, adjustable counter blades made of wear-resistant steel • Retractable discharge belt, discharge height up to 3m Condition of the machine The machine is in good technical and visual condition. Warranty: The machine will be sold in the condition existing ...

The Komptech Crambo 5000 shredder is in working condition and was overhauled in 2009, with a new Mercedes-Benz engine fitted. The Mercedes-Benz V8 engine delivers 435 hp / 320 kW and has 2 turbochargers, making the machine more economical and powerful. The shredder is classified as mobile because it has a sled that can be easily moved or transported with a towing arm system. The number of operating hours of the engine is 3700 hours. The machine comes with documentation about the inspections and the history of the shredder. In addition, the schematics of all parts in the shredder and the manual of the motor are included. The shredder is equipped with a remote control. Auction-ID: A1-40133-7

TECHNICAL DATA: Hopper opening: 700 x 360 mm Installed power: 15 kW Rotor: 600 x Ø 252 mm

BANO UNIMAC 180/70CP Mod.S, reinforced structure Hopper: 1.830 x 1.300 mm, Hopper capacity: 2.340 lt. 132 KW a.c. drive Rotor: 1.700 mm wide Rotor diam.: 660 mm. Rpm: 80-140 Outer diameter: 700 mm. Outer length 1800 m. Rotor knives: 60×60 mm. Screen: 30 mm. (or bespoke) Ram stroke on 600 mm. Side ram + upper ram Hydraulic pack Dimensions LxWxH: 2400x3600x2450 Construction year 2005 The machine is offered totally and professionally reconditioned (images show the machine once reconditioned) User manual + drawings + CE, installed power - used power in work: about 60-65% : 132 kW, conditions: Reconditioned, availability: 40 days ca from confirmation , type: Single shaft

MUTTON 750 E Drive 2 x 110 kW electric with long discharge conveyor belt The following work was carried out: 2 pieces of hydraulic motors overhauled 2 pieces of hydraulic pumps overhauled new fan new belt on the conveyor belt New drive roller for the conveyor belt Service carried out incl. oil change COMPLETELY OVERHAULED READY TO USE

GOOD CONDITION SHREDDER type TEREX Ecotec TDS 820, good condition Year of construction 2020 Only 2700 hours Weight 27500 kg

- Shredder Lindner Komet 1750 - Motor 160 kW - Without control cabinet and hydraulics. - With complete documentation (wiring diagrams, hydraulic diagrams)

- Shredder EUREC S 20.00 D - Year of construction 2008 - Ready for operation - with spare parts

Spare and repairs as main motor/engine is missing. Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-69

Equipped with, among other things: feed chain, pressure roller, rotor, cage, discharge belt, drive wheel, jockey wheel, central lubrication, power band, hydraulic bonnet, remote control, work lighting, complete documentation. Auction-ID: A1-42370-8

This is a slow-running shredder, Cat C18 diesel engine, readable hours reading 738 Hr, equipped with 2 HD rollers with 67 teeth each, interchangeable sieve racks, track undercarriage, track width 500 mm, magnetic tape, foldable unloading belt, capacity up to approximately 100 T/Hr, radio remote control, fold-out receiving hopper, automatic grease lubrication, automatic extinguishing system, engine number WJH07393, Auction-ID: A1-42370-9

hour position 1322 Hr, bunker inside dimension (LxW) 2600x1500 mm, equipped with Volvo Penta diesel engine, adblue, interchangeable rollers, sieve cage, 2x set concrete rollers, 1x set biomass rollers, receiving hopper, 129 Kw, TrackOne track chassis, track width 400 mm, magnetic tape, foldable discharge belt (LxW) 7200x700 mm, dump height hydraulically adjustable, hook lift sled/hook, sled length approximately 6000 mm, sieve belt with sieve deck, radio remote control, Auction-ID: A1-42370-7

Equipped with spare rotor, hydraulically operated hopper valve, machine is V-belt driven (V-belts available), detachable hopper, Interchangeable basket. Auction-ID: A1-42370-21

Stack dimensions (LxWxH) - 16m x 1,4 m x 1,6 m automatic drying by means of computer Heating power - 90 kW Top Condition

Motor logs gripper with electro-hydraulic drive. Diameter: 1,000 mm Weight: 1,260 kg Drive parts: 1) Electric motor 5.5, kW - 100% ED, protection class IP 54, rotary 1,450 rpm, operating voltage 380 V, 50 Hz 2) Constant pump - axial piston - inclined axis design, type A2FM. Flow capacity 23.2 l/min 3) Hydraulic cylinder (2 pcs.) Type 80/55, MAKE MRS double-acting, piston rods hard chrome-plated 4) Tax block NG 10, make Of Herion Turning ranges, change of direction of rotation changing from right to left and left to right, for all drive parts of Pos. 1) - 4) Fittings: made at Ermeto Electrical control: Installation according to electric circuit diagram No. 26.0.144.4 In very good condition!