wood shredder used for sale

XXL Large tire detwulster for OTR tires up to 1600 mm inner diameter! Mobile on rolling frame. Transport with unrolling tipper. Weight approx. 9500 kg, length approx. 6500 mm. Very good condition!

Two-shaft shredder Drive 37.50 kW

CATALOG NUMBER 6114 TECHNICAL DATA - 800x1000mm loading hopper inlet - rotor working width 800mm - pump motor 0.75kW - 15kW main engine - number of knives 21 pcs - dimensions of the knives 30x30mm - 0.8x10mm sieve - pressure drawer - electric reverse - 2 × 1.1kW discharge augers - dimensions length / width / height 2460x1800x2250mm - weight 1660 kg - German production - reverse - pressure drawer - unpainted - very good condition - used chipper Net price: 69 900 PLN Net price: 16069 euros depending on the price, 4.35 euros (Prices may vary for greater fluctuations)

Styrofoam shredder MAXI XL 1400 x 560mm MAXI 1400 x 600mm JUMBO 1800 x 800mm Insertion opening: L x W Polystyrene shredder MAXI XL: 1400mm x 560mm Polystyrene shredder MAXI: 1400mm x 600mm Polystyrene shredder JUMBO : 800mm x 800mm Dimensions: L x W x H (dimensions without blower) Polystyrene shredder MAXI XL: 2.4m x 0.9m x 1.6m Polystyrene shredder MAXI: 1.9m x 0.8m x 1.8m Polystyrene shredder JUMBO: 2.4m x 1.1m x 1.8m Motor power/connection/power conveying fan: Pre-shredder / conveyor blower Polystyrene shredder MAXI XL: 5.5 kW | Blower 2.2 kW Polystyrene shredder MAXI: 6.2 kW (with built-in screw under the pre-crusher) | Blower 2.2 kW Polystyrene shredder JUMBO 11.2 kW (with built-in screw under the pre-crusher) Conveyor blower 5.5 kW Throughput (EPS) Polystyrene shredder MAXI XL: 8-10 m3/h Polystyrene shredder MAXI: 25-30 m3/h Styrofoam  ...

Edge strip shredder for edge trimming plastic films.

Used shredder In good condition this shredder was used inside the dutch greenhouses for taking out the final plants of tomato's, peppers etc Available directly.

Used shredder In good condition this shredder was used inside the dutch greenhouses for taking out the final plants of tomato's, peppers etc Available directly.

Strand granulator type: ASG-4-63 without feed The GRANULATOR ASG 4-63 is only suitable for the cutting/granulating of semi-hard thermoplastics and is used in the regranulation /recycling of plastics on/on an extrusion line Up to 4 pieces of individual plastic strands with the Ø of 4 mm can be fed to the cutting rotor via a separate feeding unit, usually strip or roller puller. The part/granulate length is proportional to the feeding speed and can be adjusted by changing the rotor speed. Speed rotor max. 380 min-1 Ø Feed strands max. 4mm Cutting force : ~410 N EL connector: 400VDC 16A

Headquarters. Edge stiffener extraction

Specifications Cutting width: 5.8 x 50 mm Year of construction: 2003 Productivity: approx. 120 sheets (DIN A4, 70g/m²) Price: on request Cutting speed: approx. 354 mm/s the security level: 3 Power supply: 400 V/4 kW

Cutting width: 5.8 mm Year of construction: 1993 Productivity: approx. 100 sheets (DIN A4, 70g/m²) Price: on request Cutting speed: 354 mm/s the safety standard DIN 66399: P2 Power supply: 400 V / 4 kW Machine is fully functional, after technical inspection. Price also includes the paint renovation. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Specifications Cutting width: 3.8 x 50 mm Year of construction: 1997 Power supply: 400 V/ 4 kW Price: on request the safety step: DIN 66399 O-2/P-3/T-3/E-2/

Specifications Industrial shredders IDEAL 4104 Shredder Cutting width: 6 mm Power supply: 400 V/ 4 kW the safety step P2 DIN66399-1 Year of construction: 1993 Productivity: ok. 70 sheets (DIN A4, 70g/m²) Machine is fully functional, after technical inspection. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Specifications Cutting width: 12mm, 9mm, 6mm, 3mm Year of construction: 1988-1989 Productivity: approx. 70 sheets (DIN A4, 70g/m²) Price: on request Cutting speed: approx. 200 mm/s the security level: P1 - P2 Power supply: 380 V/2.2 kW Machine is fully functional, after technical inspection We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Specifications Cutting width: 3.8×48 mm Year of construction: 1993 Productivity: approx. 40 sheets (DIN A4, 70g/m²) Price: on request Cutting speed: - the safety step: P3 Power supply: 400 V / 2.2 kW We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

used shredder / shredder Manufacturer: ZENO Type: ZTLL 1600 x 1600 Year of construction: 2018 Operating hours: approx. 400 Specifications: Drive power: 2 x 55 kW Sieve: 35 mm hexagonal Screen design: solid screen basket, reinforced with ribs, including sieve quick-change device Counter knife: with cutting gap adjustment Hopper: 1,075 mm high, without lid with maintenance door and level sensor (Sonar Bero) Transmission: Compact gearbox with torque cut-off Filling opening: 1,600 x 1,600 mm Rotor speed: approx. 80 - 120 rpm Rotor aircraft: 600 mm Rotor design: 4 rows (76 pieces) positive inserts 60 x 60 mm on tool holders Rotor bearing: Standing bearing Machine floor and slide bottom: grooved Weight: approx. 13,400 kg Universally applicable shredder for a wide variety of materials The ZTLL shredder is the result of more than 35 years of kn ...

Specifications Shredder Cutting width: 5.8 x 40 mm Year of construction: 1992 Power supply: 400 V / 7.5 kW the safety level P4 DIN 66399-1 F2 DIN 66399-1 pts. 5.2 Baler Maximum pressure: 9 tons Year of construction: 1992 Pressing force: 36 tons/m² Channel cross-section: 500 x 500 mm Dimensions of the tailgate: 400 x 450 mm Power supply: 400 V/ 3.5 kW Bale binding: manual

Builder: GREEN TECHNIK Model: BS 750 PTO Engine: 66 kW (90 HP) Data: L. 5.700 mm x W. 1.920 mm x H. 2.900 mm Year: 2003 Hourly Production: 25 m³/h Shredding System: 64 HAMMER

Specifications Cutting width: 7.5x40-80 mm Year of construction: 1999 Productivity: approx. 300 sheets (DIN A4, 70g/m²) Price: on request Cutting speed: 250 mm/s the safety step: 2+1 wg DIN 32757 P-1,O-1,T-2 wg. DIN66399 Power supply: 400 V / 6 kW Maximum pressure: 9 tons Power supply: 400V/4kW Pressing force: 3.64 kg/cm² Year of construction: 1999 Bale size: 550x450x350 mm Productivity: - Bale weight: - Price: on request We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Specifications Cutting width: 3.8x50 mm Power supply: 400 V Year of construction: 1991 Price: on request the security level: P2

Wood shredders, plastic shredders, garbage shredders, two-shaft shredders, shredders, shredders used Manufacturer: I.S.V.E. Srl Type: 80-80 D Year of construction: 2003 Insertion approx. 1500 x 900 mm Insertion height approx. 1600 mm Drive 2x 9 kW 380 V Dimensions: approx. 2400 x 1800 x 2400 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

For sale renewd shredder made by HOMBACK with 250kw. Used for shredding wood in long till chipwood.

Untha RS40 Operating hours only 420 Motor 2x11KW Shaft length 750mm Knives are in top condition! For 25 years, we have specialized in the sale of woodworking machinery. Each of our machines is extensively tested before sale to ensure the highest quality and reliability. The satisfaction of our customers is our top priority. You are welcome to visit and test the machines in advance so that you can personally convince yourself of their flawless function and quality. In addition, delivery can be organized by us on request. For further information or questions, please do not hesitate to contact us at any time by phone or message. Net price

Untha LR 1400 Year of construction 2008 Motor 30KW Rotor length 140cm Weight 3t The machine is used for: Pallets Solid wood OSB / Particleboard / MDF Construction timber and waste wood Wood with nails or screws For 25 years, we have specialized in the sale of woodworking machinery. Each of our machines is extensively inspected before sale to ensure reliability. The satisfaction of our customers is our top priority. You are welcome to visit and test the machines in advance so that you can personally convince yourself of their function and quality. In addition, delivery can be organized by us on request. For further information or questions, please do not hesitate to contact us at any time by phone or message.

Catalog number 6726 TECHNICAL DATA - 280x300mm loading hopper inlet - outlet for shredded wood fi 310mm - rotor working width 340mm - 22kW main engine - number of knives 6 pcs - dimensions length / width / height 1300x1150x1680mm - weight 720 kg ADVANTAGES - very good condition - used chipper Net price: PLN 19900 Net price: EUR 4422 Net price, calculated at the rate of 4.50 PLN / EUR (with greater fluctuations in the rate, the price may change)

Hacker Zerbrik Motor 30KW Wavelength 1m Hydraulic Moving Floor Weight 3t Year of construction 2009 Dimensions: 1900x2600x1800 mm (LxWxH) Very suitable for pallets due to the long shaft, nails are no problem for the machine. For 25 years, we have specialized in the sale of woodworking machinery. Each of our machines is extensively tested before sale to ensure the highest quality and reliability. The satisfaction of our customers is our top priority. You are welcome to visit and test the machines in advance so that you can personally convince yourself of their flawless function and quality. In addition, delivery can be organized by us on request. For further information or questions, please do not hesitate to contact us at any time by phone or message.

Weima ZM 40 Motor 2x15KW Operating hours 1500 Cutting unit 750mm long Sieve 20mm New gearbox oil... Machine is immediately ready for use For 25 years, we have specialized in the sale of woodworking machinery. Each of our machines is extensively tested before sale to ensure the highest quality and reliability. The satisfaction of our customers is our top priority. You are welcome to visit and test the machines in advance so that you can personally convince yourself of their flawless function and quality. In addition, delivery can be organized by us on request. For further information or questions, please do not hesitate to contact us at any time by phone or message. Net price

SHREDDER KOMPTECH TERMINATOR 5000 E incl. control cabinet

Pre-shredder / shredder / chopper Fabr. Piranha for wood and plastic Motor 37 Kw Shaft length 600 mm with 3 x 5 Schneider knife with sieve 35 mm with control

We offer you a semi-mobile Maier crusher. This used to shred wood, paper, etc. The counter cutting edge was converted with gas pressure cylinders to rise in case of faulty parts (such as Büffel Doppstadt). The machine is mounted on a semi-mobile steel frame to be manoeuvred on the premises. Currently, 90 KW of electrical power are installed. However, the gearbox can absorb up to 250 KW of power.

Part number 7974 SPECIFICATIONS - inlet of the widened loading hopper 1500x1730mm - outlet for shredded wood fi 200mm - rotor working width 990mm - main motor 22kW - 0.75kW pump motor - number of knives 54pcs - knife size 40x40mm - 20mm sieve - pressure drawer - electric autoreverse - dimensions l/w/h 2500x2200x2350mm - weight about 2000kg ADVANTAGES – German production - pulse pusher - Pusher to half - Fast/forward pusher – automatic speed adjustment of the pressure drawer – original DTR + CE documentation year 2018 – pressure drawer – viper – screw conveyor, responsible for transporting wood chips – autorever – used chipper, very good condition Net price: 115900 PLN Net price: 27595 EUR depending on the price 4.20 EUR (Prices may change with higher fluctuations)

used single-shaft shredder Manufacturer: LINDNER Type: VEGA 1100 L Year of construction: 2013 specifications: Filling volume: 1.7 m³ Working opening: 1,100 x 1,800 mm Rotor length: 1,090 mm Rotor flight circle: 434 mm Rotor speed: 100 rpm. Drive power: 45 kW Pneumatic pusher: 6 bar Weight: approx. 6,000 kg

Twin-shaft shredder Drive 37.50 kW

Part number 7975 SPECIFICATIONS - Inlet width 450mm - Inlet height 250mm - shaft width 530mm - knife length 530mm - number of knives 2pcs - sieve dimensions 50x50mm - 2 gear pulling shafts from the bottom - lower shaft motor about 2.2kW - Pulling shaft geared from above - upper shaft motor about 2.2kW - conveyor belt - Conveyor belt length 6500mm - conveyor belt width 400mm - main motor 37kW - 0.37kW conveyor motor - autorever (adjustable) - overall dimensions of the machine l/w/h 2400x1300x1100mm - overall dimensions of the conveyor belt length/width/height 6600x610x550mm - weight about 2500kg – German production – autorever (adjustable) – protects the machine from blockage and damage in case of overload – with a 6500mm conveyor belt – used chipper, very good condition Net price: 115900 PLN Net price: 27595 EUR depending on the price 4.20 EUR  ...

used shredder Manufacturer: BOA Type: ALLIGATOR 550 - 100 Year of construction 2017 Specifications: Drive power: 55 kW Throughput: - 1,5 t/h for fine adjustment, and - up to 6.0 t/h with coarse setting Filler opening: 1,120 Rotor speed: 1,500 rpm Operating voltage: 400 V/50 Hz Insulation class: IP 55 Weight: approx. 5,200 kg

Part Number: 7973 SPECIFICATIONS - inlet width 410mm - Inlet height 210mm - shaft width 430mm - shaft diameter 330mm - knife length 430mm - number of knives 2pcs - sieve dimensions 50x50mm - Pulling shaft geared from below - 1.1kW lower shaft motor - Pulling shaft geared from above - 1.1kW upper shaft motor - vibroryn - vibroline length 4160mm - vibroline width 370mm - main motor 45kW - autorever (adjustable) - reverse gear - overall dimensions of the machine l/w/h 2150x1450x1050mm - Overall dimensions of the vibroline l/w/h 4160x650x880mm - weight about 2500kg ADVANTAGES – German production – autorever (adjustable) – protects the machine from blockage and damage in case of overload – reverse gear – DTR documentation – used chipper, very good condition Net price: 73900 PLN Net price: 17595 EUR depending on the price 4.20 EUR (Prices may cha ...

Builder: HAAS Model: 700/1500 HDWV-D Motor: CAT C9 300 HP Work Data: W. 6.850 mm x L. 2.530 mm x H. 2.700 mm Operative Data: W. 8.700 mm x L. 2.530 mm x H. 3.200 mm Year: 2011 Hourly Production: 30 t/h Rotor: 2 Pz (TWIN SHAFT) Rotor Data: L. 1.500 mm x D. 700 mm Rotor Tools: 7/6 TOOTH per ROTOR + 4 TOOLS Weight: 19.000 Kg

Numer katalogowy 7742 DANE TECHNICZNE - szerokość wlotu 350 mm - wysokość wlotu 140 mm - szerokość wału 345 mm - średnica wału 290 mm - ilość noży 2 szt - wymiar sita 55x55mm - wał ciągnący zębaty z góry i dołu - silnik wałów 2×1,5kW - elektryczne autorewers (z możliwością regulacji) - z wibrorynną - długość, szerokość wibrorynny 3750×355 mm - wymiar cała wibrorynny 3750x620x1210mm - odbiorczy z taśmociągiem 2970x340mm - wymiar całkowity taśmociągu 3000x630mmx750mm - silnik główny 22 kW - wymiary dł/szer/wys 3000x1100x1500mm - waga około 2500 kg ATUTY – produkcja niemiecka – wibrorynna – z odbiorczym podajnikiem taśmowym – autorewers – rębak używany, stan bardzo dobry Cena netto: 47900 PLN Cena netto: 11405 EUR w zależności od ceny 4,20 EUR (Ceny mogą się zmieniać wraz z wyższymi wahaniami)

PART NUMBER 8013 SPECIFICATIONS - Inlet width 450mm - Inlet height 210mm - Shaft width 450mm - shaft diameter 550mm - number of knives 2pcs - pulling shaft, geared from above and bottom 2×2.2kW - additionally, a geared pulling roller from the bottom in front of the pulling shaft - electric autorever (adjustable) - reverse gear - belt feeder - Feeder length 2260mm - Feed belt width 430mm - main motor 45kW - Total dimensions of the feeder L/W/H 4900x1700x1700mm - weight about 3000kg ADVANTAGES – with belt feeder – electric autorever – reverse gear – used chipper, very good condition Net price: 76900 PLN Net price: 18310 EUR depending on the price 4.20 EUR (Prices may change with higher fluctuations)

Doppstadt DW 3060K Biopower Type F - Year of construction 11/2017 - Hours 4839 - Engine MTU 490 hp - AD BLUE - Track chassis - Weight 30,000 kg -Remote control - Humidification system - Tail conveyor 7m - Overbelt magnet Machine is overhauled and immediately available

Cutting width: 4 x 60 mm Year of construction: 2015 Productivity: approx. 35-40 Sheets (DIN A4, 70g/m²) Price: on request Security level: P3 Power supply: 380 V/ 2.2 kW Machine is fully functional, after technical supervision.

PART NUMBER 8014 SPECIFICATIONS - inlet width 540mm - Inlet height 260mm - shaft width 560mm - shaft diameter 590mm - number of knives on the shaft 4pcs - Pulling, toothed feed rollers from above and below 2x4kW - Sieve 40x35mm - electric autorever (adjustable) - reverse gear - vibroline 2.2kW - vibroline length 6000mm - vibroline width 500mm - efficiency about 12-16mp/h (depending on the type of shredded material and sieve opening) - main motor 75kW - Automatic hydraulic lifting function of the upper feed roller - total dimension of vibrorine 6000x950x1600mm - total dimensions of the machine length/width/height 3400x1700x2000mm - total weight about 6000kg ADVANTAGES – vibrating feed table 6000mm – electric autorever (adjustable) – reverse gear – produced by the Polish brand OSKA – electrical diagram, DTR + CE documentation – unpainted – used ...

Doppstadt DW 3060 Biopower Type F - Built in 2017 - Hours 6118 - Engine MTU 490 hp - AD BLUE - Weight 25,000 kg - 42 teeth -Remote control - Humidification system - Rear conveyor 5.5m - Overbelt magnet Machine is overhauled and immediately available