wood shredder used for sale

Condition: New (traces of storage available) Part Number: 8256016 Serial Number: 19293766 Type: 1724 Suitable for: Mitsubishi S12R

TO WHOM IT MAY CONCERN ; WE VE RECON GOVERNOR WOODWARD UG - 8D AT OUR STOCK. PLS FIND DETAILS ON BELOW. REF NO : 8525 - 620EG GOVERNOR SPEED. : 600 - 1560 SERIAL NO : 2384814 EX STOCK AT IZMIR TURKEY . IT IS READY TO SHIPMENT IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E-mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 aliagamarine.com TURKEY

Woodward LinkNet 9905-972 Ref J Overhauled Wärtsila Tuning Centre LinkNet 6 CH 4-20mA

Woodward LinkNet 9905-969 6 CH 4-20mA Overhauled Wärtsilä Tuning Centre

Manufacturer: Wood EYE, Year: 2002, Brettbreite min-max mm: 30-90, Brettstärke min-max mm: 20-55, Brettlänge min-max mm: 500-5000, Year :2002

HAVE A GDY SIR; WE VE 3 PCS USED WOODWARD 733 CONTROL UNITS. AT OUR STOCK PART NO 8237-1177 REVISION B 3PCS WE 1 PC USED WOODWARD LS-5 CONTROL UNIT PART NO 8440 - 2077 A IF YOU VE ANY QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E-mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

Turbine Control Woodward 505 Turbine control, built in 2007 of 2600 KW Condensation turbine with 0 operating hours 1 available. 3.3 KV / 100 V, 50 Hz, 626 A Price: 6,900 €, plus VAT, FCA-free. Turbine Control Woodward 505 Manufacturer: Woodward Type: Turbine Control Rated power [KVA]: 3,575 Voltage [V]: 3.3 KV / 100 V Frequency [Hz]: 50 Operating voltage [V]: 24 Rated voltage [A]: 626 Year of Make: 2007 Dimensions [m]: 1.60 x 0.60 x 2.00 Weight [kg]: 500

We have a new TECJET 110 for sale. DN100 QTY 1 pc Part Number 369910 Email for special price and photos. Available for immediate delivery

Type F-2 Thickness of panel 10-55 mm Edging thickness 0,4-2 mm Feeding speed 13 m/min Air pressure 0,8 MPa Total install power 10 kW Panel width ≥ 80mm With pre-milling Transport dimensions 3700x600x1250 mm Weight 960 kg

Full overhauled valve TEC JET 50 PLUS with no use after maintenance. Ready to send.

Woodward 9905-969 Input Module 6 Channel Mint

Woodmizer EG100 double edger, built in 2019, standard equipment, 8 kW, 2 saw blades, 512 kgPrices subject to change, errors, printing and typesetting errors excepted

Woodmizer log band saw, built in 2022, incl. pre-cutter, electric height adjustment, electr. Feed, 900 mm max. log diameter, 11 kW, 10 m cutting length, 1000 kgPrices subject to change, errors, printing and typesetting errors excepted

Double edger Woodmizer EG250, as good as new, max. 80 operating hours, 15 KW, saw blades, infinitely variable feedPrice subject to change, errors, printing and typesetting errors excepted

Double edger Woodmizer EG300, built in 2019, good conditionTechnical data:Passage width 550 mmCutting height 60 mmMinimum cutting width 60 mmMaximum cutting width 410 mmWidth adjustment ElectricMinimum board length 700 mmSaw blade diameter 2 x 350mmMotor 15 kWFeed speed Infinitely variable 0 to 25 m/minMachine length with tables 4900 mmMachine width 1630 mmMachine height 1250 mmWorking height 900 mmWeight 988kgPrices subject to change, errors,

Double edger EG100, built in 2022, very good condition, max. board thickness 50 mm, max. trimming width 300 mm, 7.5 kW, 2 knivesPrices subject to change, errors, printing and typesetting errors excepted

Woodward ESC for Mitsubishi S6R 04251-22001

New Woodward EM35MR1 actuators. Ser.nr. 13327615. Made in USA.

Biete Woodward Stellgerät mit der Teilnr. 340597 for sale.

Type DTL-20A modified Brush roll height 200 mm Pneumatic Grinding Head Height 200 mm Brush roll diameter 300 mm Pneumatic Grinding Head Diameter 100mm Diameter of spindle 25/30 mm Roller speed: frequency control Electric up and down Power 0.75 kW Transport dimensions 860x750x1100 mm Weight 140 kg Price 2050 Eur (EXW Jonava, Lithuania)

Brush sander WOODLAND MACHINERY with metal brush (new) Type 1000-2S metal Working width 1000 mm Min.working length 400 mm Working thickness 2-80mm Grinding roller speed - Frequency control Feeding speed 5-20 m/min Metal shaft 7.5KW Grinding motor 2.2KW Feed motor 1.5 kW Lifting motor 0.37KW Total motor power 11.57 kW Transport dimensions 1600x1650x1450mm Weight 750 kg Price 6700 Eur (EXW Jonava, Lithuania)

Fan, fan, electric motor, blower, electric motor, blower, centrifugal fan, emergency exhaust fan, flue gas fan, axial fan, axial fan, axial fan, axial fan -Manufacturer: Ziehl-Abegg, axial fan axial fan -Type: HE823412 FTXR 184259/56K -Power: 0.473/0.210 kW / 1350/1030 rpm -Fan: Ø 500 mm -Dimensions: Ø 660 / 240 mm -Weight: 11 kg

Fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial fan, axial fan -Case: made of stainless steel -Condition: Fans are unused (stock items) -Manufacturer: Fläkt Woods, axial fan axial fan -Type: 112JM/31/4/6/223S D160L -Power: 15 kW 1465 rpm -Number: 3x fan available -Price: per piece -Dimensions: 1350/1350/H830 mm -Weight: 300 kg/piece

Fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial fan, axial fan -Housing: galvanized steel -Condition: Fans are unused (stock items) -Manufacturer: Fläkt Woods, axial fan axial fan -Type: 90JM/25/4/9/24 3S M3AA132MA INT BMLESS -Power: 7.5 kW 1462 rpm -Fan wheel: Ø 900 mm -Number: 3x fan available -Price: per piece -Dimensions: 1140/1140/H610 mm -Weight: 140 kg/piece

Fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial fan, axial fan -Housing: galvanized steel -Condition: Fans are unused (stock items) -Manufacturer: Fläkt Woods, axial fan axial fan -Type: 100JM31/04/09/22 50Hz 2L D160 -Power: 11 kW 1465 rpm -Fan wheel: Ø 1000 mm -Number: 1x fan available -Dimensions: Ø 1245 x 800 mm -Weight: 237 kg

Drive Type: Power Take-Off (PTO) Power requirements: 18 to 30 hp (13 to 22 kW) Hitch: 3 points (category 1) PTO: 540 rpm Max branch diameter: 10 cm ⸻ Grinding system • Cutting Disc System • Steering wheel: ± 45 cm (≈ 49 kg) • 2 adjustable blades • No Stress System (automatic power regulation) • Pilot System (machine control computer) ⸻ Power & Operation • Hydraulic feed rollers • Roll width: 200 mm • Roll diameter: 140 mm • Hydraulically adjustable speed • Electric forward/reverse controls ⸻ Dimensions / transport • Working dimensions: 1800 x 800 x 1930 mm • Transport dimensions: 1800 x 800 x 1930 mm • Folding hopper • Feed hopper: 1510 x 700 mm • Hopper inlet height: 950 mm • Discharge height: 1780 mm ⸻ Equipment • 270° swivel fireplace • Independent hydraulic pump with reservoir • Swivel service hood • Safety b ...

Drive Type: Power Take-Off (PTO) Power requirements: 18 to 30 hp (13 to 22 kW) Hitch: 3 points (category 1) PTO: 540 rpm Max branch diameter: 10 cm ⸻ Grinding system • Cutting Disc System • Steering wheel: ± 45 cm (≈ 49 kg) • 2 adjustable blades • No Stress System (automatic power regulation) • Pilot System (machine control computer) ⸻ Power & Operation • Hydraulic feed rollers • Roll width: 200 mm • Roll diameter: 140 mm • Hydraulically adjustable speed • Electric forward/reverse controls ⸻ Dimensions / transport • Working dimensions: 1800 x 800 x 1930 mm • Transport dimensions: 1800 x 800 x 1930 mm • Folding hopper • Feed hopper: 1510 x 700 mm • Hopper inlet height: 950 mm • Discharge height: 1780 mm ⸻ Equipment • 270° swivel fireplace • Independent hydraulic pump with reservoir • Swivel service hood • Safety b ...

HAMA Professional M8CD Shredder, for documents and CDs

HAMA Professional M8CD Shredder, for documents and CDs

HAMA Professional M8CD Shredder, for documents and CDs

HAMA Professional M8CD Shredder, for documents and CDs

Document Shredder HAMA Professional M12CD Shredder

Document shredder HAMA Professional M12CD Shredder, large stand-alone device

HAMA Professional M8CD Shredder, for documents and CDs

Stephan Shredding Machine Type: MCH-D 60A or MCH-D 30 Machine almost complete Nirosta Product-contact parts 100% Nirosta Power: Approx. 45 KW Product output approx. 2000 Kg hour MCH-D 30 Product output approx. 4000 Kg hour MCH-D 60

intake opening: 2,500 x 2,000 mm rotor flight circle: 580 mm each rotor execution: special teeth motor power: 2 x 90 kW with planet gears weight: approx. 18,500 kg

Inlet cross-section: 1200 x 1600 mm Drive: 110 kW, without gearbox Rotor flight circuit: 380 mm Rotor speed: approx. 470 rpm Rotor design: 66 cutting plates on tool holders Screen version: solid screen basket, reinforced with ribs Sieblochung: 15 mm Counter knife: with cutting gap adjustment Machine weight: approx. 5,900 kg Intake opening: 1,200 x 1,600 mm Engine power: 110 kW, without gearbox Rotor flight circle: 380 mm Rotor speed: approx. 470 rpm Cutting system: 66 cutting inserts on toolholder Screen: reinforced screencage, 15 mm perforation Counter knife: with mechanical adjustment device Machine weight: approx. 5,900 kg

intake cross section: 2500 x 1,700 mm motor power: 160 kW rotor flight circle: 670 mm rotor execution: cutting inserts on tool holders counterknife: with cut gap adjustment machine weight: approx. 24,000 kg

for crushing fruit and vegetable tins made of plastic and cardboard, Packing material dimensions max W 450 x max H 450 mm L unlimited with 1 discharge conveyor belt, B=500 mm with 1 big-bag holding device with extractor belt

intake cross section: 5,000 x 3,500 mm motor power: 2 x 110 kW motor power hydraulic unit: 22 kW rotor flight circle: 635 mm rotor execution: 244 pcs. cutting tools on tool holders screen: hydraulically tiltable hopper volume: approx. 40 m³ machine weight: approx. 55 tons

Inlet cross-section: 1200 x 2300 mm Drive: 30 kW Rotor flight circle: 450 mm Rotor speed: approx. 80-140 RPM Rotor version: 24 single tooth Screen design: reinforced solid basket, with ribs Hopper: 1,000 mm in height, without lid Machine weight: approx. 6,000 kg Machine number: G-1-66

Intake opening: 420 x 750 mm Motor: 7,5 kW Rotor flight circle: 250 mm Rotor speed: approx. 140 RPM Rotor version: 10 single teeth Screen design: reinforced, with ribs Hopper: 1,050 mm high, without lid Exhaust pipe 200 mm diameter Machine weight: approx. 900 kg

Stephan Feinstzerzerer Type: MCH-D 60 Drive: 49 KW performance in the hour depending on the desired fineness of the starting product. From 2000 to 3500 Kg/hour This machine is ready for operation, as from the customer. With used but outdated cutting sets

Inlet cross section: 2500 x 1900 mm drive: 2 x 110 kW rotor flight circle: Ø 745 mm rotor speed: approx. 93 RPM rotor design: 185 PCs. cutting plates 50 x 50 x 25 mm screen perforation: Ø 70 mm counter knives: with cutting gap adjustment machine weight: approx. 29,000 kg

Working width_ 600 mm Working height_ 300 mm N of knives_ 3 OTHERS AVAILABLE FROM STOCK

Ready exhibition machine built in 2016 Mercodor ZM 44 Cutting Chamber 500 x 380 mm knife 14 3 mm hook drive 7,5 kw

Ready exhibition machine MERCODOR ZM 52 Year 2015 Mercodor Shredder ZM 52 Cutting area 650 x 540 mm or 1050 x 540 mm with 22 kw

the two shaft shredder with knives 14 mm 3 hooks and 7.5 kw

Twin Shaft shredder mod. ITS850x550E- 22 kW. Heavy duty construction. Shredding chamber dimensions 8500x550 mm with n°2 counter-rotating hexagonal shafts fitted with n°28 blades with a thickness of 30 mm, 1 hook double spaced to 60mm. Including n°1 main gearbox with straight spur gears for fast and slow shaft. Driven by n°1 x 22 kW motor The shredder is supplied complete with supporting stand, feeding hopper. The electric control panel of this shredder will be fitted with a Siemens PLC to control the working logic of the shredder including the automatic shafts reversal system in overloading conditions, a display will show the working parameters and operating conditions. The total weight of the shredder is around 3.000 Kg.

This is a second hand machine with 22 kw. Knife 24 3 mm hook complete with Hopper, base and switchgear.