wood machine used for sale

Gr. Swing diameter: 600 mm Top width: 2200 mm Gr. Grinding diameter on grinding wheel 800 mm Ø: 125 mm Wheels Ø use of put sticks: 20-125 mm Grinding wheel dimensions: 800 x 28-800 x 42 x 305 mm 2 wheel speeds 3 workpiece speed: 32, 55 and 96 RPM Table Shift manual coarse/fine: 10/2 mm Machine. Feed speed of the grinding wheel: 0,005 - 0,025 mm Table 6-speed: 120-1540 mm / min Grinding spindle stock drive: 8 kW Electr. Supply: 380/400 V, 10 kW Space requirements: 6100 x 2300 x 1600 mm Weight: 7T

Format (cm): A3 pockets: 4 Sword: 1

WEIBERT WJ-SAe-FR2 2.3 3-3.2 Formatschiebetisch: 2300 mm to 3200 mm) Cutting height: 103 mm Blade 90 °-45 ° swiveling. 315 mm Scoring unit: separate drive Milling spindle: swivel Blower RPM & #65279;: 1400/3500/6000 and 8000 min. Motor power: 5KW streaked 400V 50 Hz Saw: 4KW OPTIONS for an additional fee available! Integral safety rail 500 mm Left and right rotation Suction pipe with suction hose Degree grid system on the boom G & WJ-SAe-FR2 2.3/3.0/3, 2m SPECIAL PRICE PLEASE REQUESTS! OPTIONS for an additional fee available!

Bread cutting machine with cutting width adjustment of Wäbama type Circumat.The machine runs without oiling, with round knife and digital control.Suitable to cut breads up to 38cm wide.Right tray is inserted then the loaves are moved by means of sliders to the left Pushed. In the middle between left and right tray the knife rotates and cuts the bread in the desired thick. The cut discs are pushed into the left compartment where they are straightened medium disc holders. After cutting, mam can take out the slices and bag them on the icing rail. Easy operation and cleaning of the machine, little space requirement.Payment and shipping on request. Wabäma Circumat Bread Cutting Machine Circular knife machine Cutting width adjustable Current type three-phase current Operating voltage 400V Control voltage 24 volts Rated current of the machine 1.9 A Insurance in the supply line  ...

Koelle edge planing machine model FKF 51 is in good condition, ready to use. L x W x H = 3000 mm x 700 mm x 950 mm Weight approx. 200 kg Built in 1982 Engine No. 390 The rubber rings at the pressure rollers should be times replaced. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

used ilapak Delta G E horizontal bagging machine with running sealing jaws. The machine is mainly used for the production of sealing packages and protective fumigation to extend the durability of various products. The machine requires electricity, compressed air and, if necessary, water. The system can be seen in the photos without a transport table, but of course there is also the transport table. The total length of the machine is about 6400mm depth is 1160mm and height 1550mm plus labeler. The labeler is from Werner Hermann.The packaging machine is about 1600 kg heavy. Until recently, small cartons of Berliners were packed at the plant. The plant is complete and ready for loading in our warehouse in Bielefeld. Payment and shipping on request. 380 Volt Connection 50 Hz 6500 watts Weight approx. 1600 kg incl. labeler

We can offer: Windmoeller & Hoelscher Type : Triumph 1 Year: 1980 Bag width 50 - 120 mm. Tube length 120 - 340 mm. Bottom width 35 - 70 mm. 2 unwinds and glue units for 2 ply bags With : Photocell for pre-printed reels We also have available a suitable 2 and 4 colour tail end printer

Drum/screen for Doppstadt SM - model -Chain drive (24 B1) -sandblasted, newly painted Very good condition Available drums: 1. for Doppstadt SM518 / length: 4.7 m / diameter:. 1.8 m /. Price: 19900 PLN: 4800EUR -15 x 15 mm -20 x 20 mm -25 x 25 mm -30 x 30 mm -35 x 35 mm -Fi 80mm 2. for Doppstadt SM618 / length: 5,5 m / diameter: 1.8 m /. Price: 23000 PLN: 5500 EUR -12 x 12 mm -15 x 15 mm 3. for Doppstadt SM620 / length: 5,5 m / diameter: 2.0 m /. Price: 25000 PLN: 6000EUR -10 x 10 mm - 13 x 20 mm -Fi 45 4. for Doppstadt SM718 / length: 7.1 m / diameter: 1.8 m /. Price: 27000 PLN: 6450EUR -10 x 10 mm -70 x 70 mm -Fi 150 / 1 szt. 5. for Doppstadt SM720 / length: 7.1 m / diameter: 2.0 / m /. Price: 31000 PLN: 7400EUR -12 x 12 mm

We can offer: Fischer + Krecke Type : Combi 31bb Year: 1980 Bag width 90 - 260 mm. Tube length 250 - 470 mm. Bottom width 40 - 140 mm. 2 unwinds and glue units for 2 ply bags With : Photocell for pre-printed reels

The list of equipment for sale from molding line: 1. Moulding Machine HSP-2D (22kW, 70f / h) 2. Lifting table 3. Pressure plate 4. The dispensing sand tank

1 AUTIMAK folding and bagging machine type M-300, year 2011 (machine has never been intensively used and is like new), Compact machine for folding and bagging of textile garments like t-shirts, shirts, scarves, heads, carves, towels, cleaning cloths, etc... Size adjustable from children to adult sizes. It uses standard bags with flap for heat-sealing. Otherwise it can use standard bags with self-adhesive on the flap. Possibility to use cardboard supports. Adjustable folding dimensions and bag size. The bag is heat-sealed with a Teflon protected blade which can seal polypropylene. It has a temperature controller for the heat-sealing blade. Garment counter included. The production is 600 T-shirts per hour with only one worker. It can fold and bag 2 T-shirts at once, doubling production speed. Bag dimensions: 25–30 cm wide x 32-38 cm long.

Design of PRO 1000 concrete products machines put this machine beside most flexible in the world. The most versatile machines in their class, the PRO machine series offers the largest variety of handling and cubing systems available. By upgrade of handling the equipment on the wet and dry line side, the capacity of complete installation can be increased significantly. Double layer products are easily produced with and optional face mix device. Pallet size: 1400 x950 mm Useful area: 1350 x850 mm Paving stones 10x20x6 cm Production capacity in 8h 1355m2 Hollow block 20x20x40 cm Production capacity in 8h 17280 pieces

KRONES Canmatic Running direction: left Continuous linear/normal Performance about 40,000 bottles / HR Including format sets for 1.5 liter, 1.0 liter, 50cl. and 33cl PET bottle Spray system by ROBATEC The machine is in good condition and is available from November 2015.

Kramatorsk KJ 1910 10-meter boring depth - Heavy duty: 25-ton workpiece >>> NOTE: MACHINE IS IN OUR WAREHOUSE IN ITALY < < < Heavy duty: Max. work-piece weight 25 tons Spindle motor kW 85 Counter rotation motor 90kW Spindle hole diameter mm 700 Max. boring diameter, mm 600 Center height over the bed, mm 670 Max. work piece external diameter, mm 1300 Work piece length range on one-sided machining, mm 1000...10000 Work piece diameter range, mm: - in chuck of faceplate 200...1100 - in open rest 400...900 - in closed rest 200...630 - in round rest 250...550 Spindle speeds range, rpm 2...200 Machine overall dimensions, approx mtrs 31 x 3 x 2,3 Machine weight, kg 90000 (approx)

AUTOMATIC COPY SHAPER machine type BALESTRINI CP 4 second hand machine Technical Details : machine composed by 4 units : 2+2 shaper units max. working useful length mm.2500 max. working width mm. 500 max. working heigth mm. 180 speed rotation shaper units 8500 rpm speed rotation sanding units 3500 rpm hydraulic pump motor power Hp 5,5 net weigth kgs. 3300 Volt. 380/50

Uhlmann C2504 continuous motion cartoner, carton size range min. 30x15x65 mm (AxBxH), max. 80x90x155 mm (AxBxH) Blister/tray size range min. 30x3.5x60 mm (LxWxH), max. 75x12x150 mm (LxWxH), suitable for blister count from 1 - 12 blisters per carton, Leaflet/Booklet feeder (leaflets/booklets are automatically taken from their carton/trays and placed into the infeed system), the machine is also prepared to accept a GUK leaflet folder and feeder. Includes Wolke m600 advanced inkjet printer for variable data and codes, set up for reverse tuck cartons with Nordson PROblue 4 hot melt glue system for tamper evidence. The cartons discharge though a Pago Pagomat 6/2 labeller for top labelling (vignette/bollino) Electrics 400 V/230 V/50 Hz, 20 A, connected load 10kW Compressed air 6-10 bar Machine footprint ca. 7289 x 2041 mm (LxW) Height ca. 2254 mm Machine nett weight ca. 8000 kg Output u ...

Surface grinders - horizontal ELB-SCHLIFF perfect B-10 SPS Second-hand machine Grinding length: 1000 mm Grinding width: 400 mm Workpiece height: 450 mm Table size: 1000 x 400 mm Grinding wheel dimensions: 300 x 50 mm Grinding spindle motor: 3.5 kW Table speed: 2-30 m / min Grinding wheel speed: 1500 rpm Magnetic plate size: 1200 x 500 mm Total power: 15 kW Machine weight approx.: 4,5 t Space requirement approx.: 3.5 x 2.5 x 2.5 m General overhauled by 2015 with 12 month warranty Paper machine Magnetic clamping plate 1000 x 400 Automatic dressing device with compensation 1 flange Items put up

Used machine as good as new Grinding length: 600 mm Grinding width: 400 mm Workpiece height: 450 mm Table clamping area: 600 x 400 mm Grinding wheel dimensions: 300x50 mm Grinding spindle motor: 3.5 kW Table speed: 0 - 30 m/min Grinding wheel speed: 0 - 35 m/s Magnetic plate size: 600 x 400 mm Total power requirement: 15 kW Machine weight approx.: 4.5 t Room requirements approx.: 3.5 x 2.5 x 2.5 m 12 month warranty Paper filter machine Automatic table dressing with compensation 1 pc. flange Setting-up elements

Empty-tray (part of a line)

Producer: GRAEF Type: EURO 2560 S Power supply: 230V / 50 Hz Power: 0.3 kW Slicer cutting machine GRAEF type EURO 2560 S Ask for an offer iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

Multifunction X-ray machine Built in 2005 Generator Poydoros SX 65/80 Image storage LIH (last image hold) Image intensifier 23 cm Tube Optitop 150/30/50 Very good optical condition

hydraulic internal clearing machine in good operational condition Clearing stroke:1.500mm Tension: 16,000 KG â?¢ the drawing head shot in the drawbridge:85mm Through-hole in the clamping table: 120mm Workpiece diameter: max. 750mm (due to the machine body of the tool feeder) Cutting speed: hydraulically infinitely adjustable from 1 m/min to 6m/min Return speed: hydraulically infinitely adjustable from 5m/min to 30m/min Dimensions of the machine: (bx t x h) approx. 6,600 mm x 800 mm x 1,500mm (without working area) Power supply / connection power: 380Volt 50 HZ /8.0 KW Accessories / Optional equipment: â?¢ the machine has an electrical control for clearing lifting movement â?¢ the machine has an integrated cooling cutting system â?¢ the machine has a flanged machine bed with a manual tool feeder The machine is ideal for the produ ...

STAMA Mod. MC 2 1997-325S pallet (Pendeltisch Peiseler ATK 520) Aufspannflaeche Pallet: 2 x 550 mm x 330 mm Max Werkstueckgewicht: 2x180kgs X = Y = Z 500 300 = 350 mm Min/Max Distance Spindelnase-Tisch: 200-550 mm rapid traverse X, Y, Z = 40/40/45 36 40 36 Werkzeuge ISO-9000 RPM Spindle IKZ CNC SIEMENS 840 c # 2 LEHMANN doppel 4. Achsen IKZ Unter Strom in unserem Lager It machined \\input shafts\\ (car power steering component) Special price for quick removal

used mechanical vertical internal clearing machine in very good condition. Pulling force at 3m/min: 3000 KG Clearance speed: 3m/min Return speed: 3m/min maximum stroke: 800mm Ropcmo87 maximum tool length: 1000mm Table area: 350mm x 220mm Table break-in: 90mm Workpiece diameter: any Dimensions (h x w x t): 1260 x 500 x 720mm Engine power: 1.1 / 1.5KW Power supply: 380 volts 50 HZ Accessories / Optional equipment: - integrated coolant / cutting agent system - Machine documentation Comment: The double spindle drive ensures a quiet and central pulling point as well as a constant clearance speed. The machine is mainly designed for the production of spring springs up to 20mm. The machine has been partially overhauled, all bearings, shaft seals and seals of the trapezoidal spindles and gearbox have been renewed. The drawing head is re-ground and adjusted, the machine body is  ...

Table size: 460 x 800 mm stroke x: 485 mm traverse path y: 385 mm traverse path z: 380 mm Quill stroke: by hand approximately 70 mm spindle speeds: 50-3150 rpm stufenl feeds. adjustable: 2-1000 mm / min rapid traverse rate: 2 m / min. Port: 3.7/4,4 kW space: 2100 x 1650 x 1730 mm weight: 1850 kg

Bei Fragen: 01718367957

used vertical tool presetting device in very good condition, ready to use Recording: SK 50 max. tool length: 460mm max. tool diameter: 400mm Optics: 20x optical magnification Energy supply: Current: 220Volt 50 HZ luminous flux connection Pneumatics: 6 bar air pressure connection Machine space requirement: (w x t x h) approx. 1400 x 800 x 1700mm (without operator and service environment) Accessories / Optional equipment: â?¢ Machine cabinet with compartment â?¢ Calibration mandrel / reference mandrel â?¢ Adapter holder Iso 50 to Iso 40 for SK 40 tools Bdujvng8ha â?¢ Adapter holder Iso 50 to VDI 30 â?¢ Adapter holder Iso 50 to VDI 20 â?¢ Adapter holder Iso 50 on special tool holder â?¢ Additional measuring clock holder â?¢ Tool positioning device to 4 x 90° â?¢ Operatin ...

Handtmann VF 610, vacuum filling machine for filling, portioning, linking, compact monitor control, filling capacity up to 3.000 kg/h, pressure up to 35/50 bar, up to 450 port./min. The machine is immediately available and you are very welcome to test the machine in Koblenz, Germany

approx. 120 packages per minute Bag width: approx. 80 to 250 mm Bag length: approx. 400 mm max. infinitely adjustable Dimensions: approx. 1,260 x 2,500 x 1,700 mm Net weight: approx. 1,100 kg

TOP STATE - UEBERHOLT IN 2020 ! Built: 2006 Table size: 3000 x 1500 x 100mm Power: 4000W Control: Mazatrol Preview with LAN / USB incl. cooler incl. linear drives on all axes incl. programming software incl. training incl. commissioning incl. fast puncture incl. ball roller table incl. 4 fold head change magazine incl. 2 cutting heads incl. 10x automatic nozzle changer FE: up to 24mm VA: up to 15mm free of oxide designed for high-pressure cutting up to 20bar no foundation ! necessary Optional automatic loading and unloading by Mazak CELL510 can be offered with warranty / commissioning / training always regularly maintained

Fugenreiigungsmaschine for stone floors Working width 50 cm Powered electric 2.2 kW L x W x H: 120 x 60 x 80 cm Weight 130 kg Built approx. 2001 The machine is little used, in good condition, ready to use. Subject to changes, errors, prior sale! Service/Ersatzteile durch MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Maschinenbau Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

M. No.: 2277

For sale we offer a bending machine. It is a Demonstration machine used for prototypes in our production department. Therefore, a few operating hours of approx. 154.1 Bh technical data: Bending force: 40T Bending length: 1600mm Distance between columns: 1200mm Stroke (Y-axis): 150mm Open height: 390mm Table width: 120mm Working speed: 15mm/s Fast speed: 150mm/s Return speed (up): 100mm/s Control axis (8 + 1 axis): Z1,Z2, Z1, Z2, R1, R2+V Power: 5.5 kW Control - Delem-DA-66T (Multilingual) Operating Instructions: English Number of strokes: 10645 Price net: 35.000â?¬ Visit possible by prior arrangement. If you are interested, please contact us.

Vertical machining center Cincinnati Millacron Traverse path x 1270 mm Y: travel 660 mm Z: travel 660 mm CNC control: Acramatic 850SX Table size: 1,370 x 660 mm Table load: 910 kg Rapid traverse x/Y/Z: 15,000 mm / min. Spindle speeds: 60-8,000 rpm. Spindle recording: ISO 40 Distance from spindle - table min/max: 150/880 mm Tool changers: 21 items Equipped with:-cooling device -Hand Council operation -Complete instructions Country of origin: England Spindle motor: 9 kW Machine weight: 8.000 kg Machine WxDxH: 3,600 x 2.900 x 3.000 mm

Universal tool-feeding machine, used universal milling machine, used Type FU 250 x 1000/2 Fabr. WMW Auerbach Built: 1988 Table size/ table: 1130 x 255 mm Laengsmotion/ longit. move: X 690 mm Horizontal movement/ horiz. Move: Y 190 mm Vertical movement/ Vert. move : Z 360 mm Tool holder/taper: ISO 40 Spindle speeds R+L infinitely/ speeds of spindle ( left/right) 56 - 2800 rpm. Pre-shot stepless all axes X, Y and Z/ feeds all axis 10 - 630 mm/min / 250 mm/min Drive power/ load 3.8 kW Weight: 2 t Specification: Vertical head,shock head

New machines: Chocolate tank, dissolving agitators, Temperature control machines, chocolate pumps. Various sizes and services, stainless steel, very good quality. We are a sales and service partner for MASSA in German-speaking countries.

For sale rotary compression machine CCM032, produced in SACMI (Italy). Perfect condition with control video system.

Manufacturer: Pressta Eisele Type: 501 angle punch Overhaul year: 2020 Built in 2010 Saw blade carbide: 500 mm Drive power saw motor: 5.5 KW Speed Saw Motor: 2860 min-1 Cutting speed Saw blade: 4500 m/min Saw blade feed: infinitely adjustable 0-70 mm/s Tool area 90 max approx.: 20 x 250 mm Punching cylinder: 1 pcs vertical top diameter 100 mm ,1st st horizontal front diameter 100 mm Punching force power: 4.0 KW Pressure max. 280 bar Pressure in KN at 280 bar approx.: 210 KN Volume flow at 280 bar approx.: 6.8 L/ min Pressure in KN at 200 bar approx.: 150 KN Volume flow at 200 bar approx.: 9.5 L/ min Supply length pneumatic: single stroke max. 600 mm Servo controlled: single stroke max. 600 mm Multiple stroke max. 9999mm Replenishment. servo-controlled replenishment unit max. 500 mm/s Compressed air connection on the side: 6 bar Weight (s ...

Flute laminating machine CA1300 Side register heel. The bottom feed stack can be adjusted for suction intensity from the touch screen, including an automatic cleaning system. The input pile has a non-stop system Monitoring by PLC with alarm in case of power supply error. Automatic gluing system that regulates not only the flow but also the recirculation. Features: · Max sheet size: 1300 X 1250 mm · Min sheet size: 400 X 400 mm · Thickness of the upper sheet: 175-600gsm / 145 - 450gsm Kraft · Bottom sheet thickness: Four-ply corrugated paper: A/B/C/E/F - Grey cardboard · Max speed: 7000 sheets per hour · Gluing accuracy: ± 1 mm · Weight: 5000 kg · Dimensions: 11500 X 2000 X 2400 mm · Electric power: 10 Kw / 380V

2 - K machine

Edge Abkappen thrower HolzHer Built in 1978 Weight approx. 220 kg L x W x H: 80 x 60 x 150 cm The machine is in good condition, ready to use. Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Die Cutting Machine Unitec T1060 Die Cutting Machine Unitec T1060 The T1060 automatic machine with or whithout stripping is used to diecutting and creasing paper, cardboard and corrugated and operations for cardboard boxes, paper labels and especially for delicate printing jobs such as cigarette packages, wine, gifts and cosmetics, etc. This machine works automatically throughout its process, with a user-friendly interface to control the cutting speed, number of sheets cut, total operating hours and its working status, as well as to dynamically control the PLC inputs and outputs, and malfunctions to facilitate operation control and troubleshooting. In addition, the machine also features self-testing (e.g., double sheets, missing sheets, accumulated sheets, or fallen sheet detection) and continuous process sampling, while providing you with a solid cutting and accuracy registr ...

Vacuum filling machine Vemag Robby, filling, portioning, linking, pc control. The vacuum filler is currently in the refurbishment and you are very welcome to test the machine in Koblenz, Germany.

POLYGRAPH wire stitching machine Serial No. 0371054 good working condition | test possible in our warehouse ----------------------------- Test in our stock is possible. Purchase only available for commercial customers with proof We sell the machine "as is", no warrenty, no guaranty. We don't take the goods back. Price is LOT. Shipping is not included. An invoice with VAT is created. (Price incl. 19% VAT = EUR 1547.00) Export price: € 1300,00 + shipping

Uhlmann C 100 modified fully automatic blister Strip packaging and simultaneous feeding of leaflets 2016 - horizontal cartoning machine -Max power 100 FS / min Format: L = 70 x 150 mm B = 30 x 100 mm H = 15 x 85 mm New hardware and software PLC Mitsubishi control and 8 inch color touch panel Accessories: -GUK leaflet folding apparatus 4 Pocket fold -Cognex 1 d barcode and 2D matrix code reading system for prospectus leaflets and folding box code -Luminizenskontrolle, presence control for leaflet in folded box -Stamping station -Prospectus before insertion -Vacuum pump

X-ray unit Siemens Multix / Vertix with 3D III Deckensrativ and Polydorus LX X-ray Generator

Technibag B BOOSTER Bag in box filler Fully automatic filling machine for soft bags and / or POUCHS (stand-up bags) Carton format: 2 L to 20 L Description of the machine: Measures and weight: Length: 1880 mm Width: 1130 mm Height: 2100 mm Weight: 370 kg Liquid flow rate: 80 hl / h - Connection: diameter 40 Macon Compressed air supply: 7 to 10 b - flow: 7m3 / h. Connection Type Rectus 26 Nitrogen supply: 1 to 4 b-flow: 1m3 / h. Connection Type Rectus 26 Power supply: 400v - 3p + neutral (N) + earth (E) - power 0.7 Kw Pulse counter: Electromagnetic counters Noise emission:

Used cutting system Schmidler S4 Built: 2005r Condition: in operation, very good Technical data The machine has the following equipment: 1. Fully automatic wood conveying with feed roller conveyor and feed and feeding cross conveyor 2. Under-table swivel cross-cut saw with 4-axis control saw blade d=720mm, 3. Universal milling unit 4 -axis, combi cutter 350 diameter,100/20-,40-,60 he combi, finger cutter 40/140, swallowtail cutter 45mm 4. 1x drilling rig (2.2 kW) - drilling direction horizontally 5. 1x slotted unit, sword 10/50/400mm (3.0 kW) - direction of operation horizontal 6. 1x drilling rig (2.2 kW)– drilling direction vertically from below 7. 1x Profiel cutter, d=120mm, L=250mm with dovetail cutter working direction vertically from below 8. Marking device vertical 9. Control board unit, cutter thickness 20mm, 10. Fully automatic beam turning station 11. Tran ...

Veneer fuegemaschine Refil 31 P Length 300 cm Year of construction 1980 Weight approx. 580 kg L x W x H: 400 x 110 x 120 cm The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12