wood machine scm used for sale

3D CNC Router T-Rex 1215 / Technical Data : Equipment / product data CNC-milling machine type High-Z/TRex series: Drive: 3 brushless brand stepping engines with 4,5 ampere. Possibility of sliding through long and up to 120mm high materials, no belt drive at the ende of the X axis! Linear guide on all exis by HIWIN / THK ! Multiple ball-bearing ball-screw spindle on all axes, proprietary brand! Rapid traverse max. ca. 12.000 mm/min Operating speed max. ca. 8.000 mm/min Technical definition X/Y : 0,005mm (1/10 Schritt); Z: 0,0025mm Backlash maximal ca. +/- 10µm (0,010 mm) Repeat accuracy: ca. 0,01 mm Clampin surface of grooven panel / T-slot table 1860 x 1340 mm Travels: X=1500mm; Y=1200mm; Z= 130 mm Non-contact reed sensors / reference switches / limit switches on all axes Double secured emergency-stop button Energy chains for a clean cable routing Total dimensions wi ...

Important and outstanding design features of the RaptorX-SL with steel substructure / RaptorX-SL2200/S20 The application variety of a RaptorX-SL CNC Fraes machine is variable due to the adjustable working area (read-through shoe under bridge: 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (at no extra charge) extremely large. special groesmes up to 17,500 mm (at one scale ) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-plates. Use the system as a plasma cutting system or waterjet cutting system, corresponding extensions are available. In the middle range of the machine (between the footpipes ) you can even process parts up to a height of 850mm (beam shroughl, etc. ) or 3D body up to about 400mm height (at 400mm ...

Specifications / Technical data S-1000/T Portalfraesmaschine / Engraving machine With the T-variant of the High-Z CNC-Fraese you acquire old-fashioned technology with the certain i-tuepfelchen in TUeV-certified quality (Emc). The High-Z/T Fraese is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. Through the ball-circuit spindles used, the High-Z/T achieves fantastic accuracy and an almost unmeasurable reverse play of about 0.01mm. At the same time, high travel speeds of up to approx. 108mm / second ( 6500 mm / minute ) can be achieved. This is how engraving and fraes speeds of up to approx. 4500mm/min can be realized and urgent journeys up to approx. 7000mm/min. Here you can see a video about empty runs with the new high-Z/T 3D CNC machine. This makes this machine series in the industrial sector just as applicable for work ...

Specifications / Technical Data S-1000/T CNC-Router / CNC-Engraver With the purchase of the T-variation of High-Z CNC-router you get a proven technology with a certain icing of the cake in TÜV-certified quality. High-Z/T was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T CNC-engraver achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machine you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This cnc-router series is usable in the industrial field as well as for works like engraving, milling, dr ...

Specifications / Technical Data S-720/T CNC-Engraving-Machine / Milling machine / CNC-Router With the purchase of the T-variation of High-Z CNC-router you get a proven technology with a certain icing of the cake in TÜV-certified quality. High-Z/T 3D-cnc-engraver was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T cnc milling machines achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machines you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This cnc-machine series is usable in the industrial ...

Slow runner with sliding floor 800 mm wide rotor 22 kw engine

Equipment / Product data of the CNC-Fraesen Type High-Z/TRex series / Type 1215 Drive: 3 busiest brand stepper motors with 4.5 amperes. Pushing through long and up to 120mm high materials possible, as no belt drive is in the way at the end of the X axis! linear guides on all axes of HIWIN / THK ! Multiple ball-bearing ball thread spindles on all axes, brand edging! speed speed max. 12,000 mm/min Working speed max. approx. 8,000 mm/min Technical platform X/Y: 0.005mm (1/10 step); Z: 0.0025mm reverse play maximum approx. +/- 10 microns (0.010 mm) Point repeatability: approx. 0.01 mm clamping area 1860 x 1340 mm travel distances: X=1500mm; Y=1200mm; Z= 130 mm contact contactno-point sensors / reference switches / limit switches on all axes Double-secured emergency trigger energy chains for clean cable Total mass with motors : LxWxH approx. 2180 x 1800 x 1420 mm Fra- Sc ...

Slow runner with sliding floor 800 mm rotor width 11 kw motor

TECHNICAL DATA: Capacity Kg/h: 1.800/2.500 Dimension mm: 8300 x 2900 x 2200 Opening width mm: 800 02 Milling Units Ø mm: 250 Total power installed kW: 103 Weight kg: 10.500

TECHNICAL DATA: Size of the table mm: 1200 x 700 Sanding belt width mm: 90

CATALOG NUMBER 6114 TECHNICAL DATA - 800x1000mm loading hopper inlet - rotor working width 800mm - pump motor 0.75kW - 15kW main engine - number of knives 21 pcs - dimensions of the knives 30x30mm - 0.8x10mm sieve - pressure drawer - electric reverse - 2 × 1.1kW discharge augers - dimensions length / width / height 2460x1800x2250mm - weight 1660 kg - German production - reverse - pressure drawer - unpainted - very good condition - used chipper Net price: 69 900 PLN Net price: 16,069 euros depending on the price, 4.35 euros (Prices may vary for greater fluctuations)

Usable for the: Milling and engraving labeling, marking Drilling, cutting Dosing and much more. (Applications require optional accessories) inclusive: Design software ConstruCAM 3D Control software KinetiC-NC incl. CAM software Estlcam Multi-zone vacuum table with recessed T-nuts sliding Control panel including step control manual central lubrication The offer here is a CNC milling machine with the above-mentioned accessories (without further ado possibly shown on the photos accessories). For operation, a milling motor is also required, which can optionally be purchased from us. echnische data: External dimensions LxWxH: 1650x1440x1950 mm Weight: approx. 650 kg Clamping surface XxY: 930x630 mm Travel XxYxZ: 900x600x200 mm (optional 300/400 mm in Z-axis) Width linear guides X,Y,Z: 20 mm Repeatability: 0.01 mm Reverse play: appr ...

Work facilitation through basic equipment The basic equipment includes, for example, an ergonomic control panel, which contains the stepper motor control and an industrial PC with touch function. Software (CAD/CAM, control software, operating system Win 10 Pro) are already pre-installed. Thus, the CNC milling machine can be operated conveniently and conveniently. A multi-zone vacuum table ensures a comfortable, fast clamping of workpieces and a strong hold during milling. Furthermore, the machine is equipped with a manual central lubrication, which makes it easier for you to grease and increases the service life of the CNC milling machine. Various applications The most diverse materials can be processed on our T-Rex, whether plastic, wood, metal or stone, nothing is impossible. Whether engraving, milling, cutting, drilling, dosing, gluing, etc., no wishes remain unfulfille ...

For sale Dusseldorf pallet straightening and riveting machine, almost new, working in all its parts.

Shredding Machine Hacker Shredder Manufacturer: WEIMA-Maschinenbau Type: WL.4. Drive:18.5Kw. Feed opening:600x1050.mm. Rotor width:600.mm. double knife row (28.pcs.) Sieve size: still selectable

- German production - autorewers - for the production of technological wood chips - powerful shaft with a diameter of 650 mm TECHNICAL PARAMETERS: - slot width 550 mm - inlet height 260 mm - two knives - engine power 110 kW - conveyor length 5000 mm - sieve 50 x 50 mm - three upper shafts pulling toothed - four lower shafts pulling toothed - rotor width 650 mm - rotor diameter 650 mm - hydraulic lifting of feed shafts - feeder height from the base 1100 mm Transport dimensions 1100x245x240 cm weight about 10 t

– German production –DTR TECHNICAL PARAMETERS: width 400 mm height 120 mm rotor diameter 430 mm rotor length 430 mm engine power 37 kW motor power 2 x 2.2 kW number of knives 2 pieces sieve 60 x 60 mm two lower toothed shafts upper toothed shaft tray length 4900 mm wood chip chute with sieve transport dimensions (L/W/H) 850 / 245 / 220 cm weight ~ 2500 kg

– after technical inspection – German production – year of production 1999 TECHNICAL PARAMETERS: inlet hole 600 x 800 mm rotor diameter 175 mm rotor length 600 mm total power 18,5 kW number of knives 14 pieces rotatable cutting knives 30 mm x 30 mm sieve fi 15 and 12 mm AUTOREWERS HYDRAULIC DRAWER pressure drawer height 180 mm rotor rotations 80 -120 rpm extraction connection diameter fi 200 mm dimensions (L/W/H) 200 x 120 x 120 cm weight 1200 kg

– after technical inspection – very good condition – Austrian production TECHNICAL PARAMETERS: hopper dimensions 120 cm x 100 cm power 2 x 11 kW four shafts rotor length 400 mm rotor diameter 300 mm sieve fi 30 mm autorewers dimensions (L/W/H) 140 / 130 / 200 cm weight 600 kg

– after technical inspection – very good condition –documentation TECHNICAL PARAMETERS: infeed size 800 x 1000 mm rotor diameter 175 mm rotor length 800 mm rotor rotation 90 rpm V-rotor main engine 18,5 kW number of knives 18 pieces rotatable cutting knives 40 mm x 40 mm sieve fi 20 mm and 15 mm AUTOREWERS HYDRAULIC DRAWER pressure drawer height 175 mm connection diameter fi 200 mm dimensions (L/W/H) 230 / 140 / 160 cm weight 1400 kg

CATALOG NO. 6875 TECHNICAL DATA - inlet width 720mm - inlet height 160mm - thickness of the shredded material 160mm - roller width 720mm - shaft diameter 600mm - knife length 80mm - number of knives 4×12pcs - 25mm sieve dimensions - pressing roller at the input 0.75 kW - toothed shaft pulling from the bottom 1.8 kW - toothed shaft pulling from above 1.8 kW - length of the vibrochute 4470mm - width of vibrochute 710mm - 2.2 kW vibrating motor - main engine 55kW - autoreverse - diameter of the extraction spigot 260mm - dimensions of the vibro-chute length/width/height 4470/950/930mm - machine dimensions length/width/height 3100/1500/1170mm - total weight about 5500 kg – German production - very low mileage – original documentation – used chipper, very good / perfect condition Net price: PLN 169900 Net price: 36538EUR Net price calculated according t ...

vibratory feeder diameter range 1-4 mm total screw length 30-40 mm output - pieces/min 63

Vecoplan VTH/55/15/2 edging chipper – German production – autoreverse – for the production of technological chips – year of manufacture 1995 TECHNICAL PARAMETERS: inlet width 550 mm inlet height 130 mm two knives engine power 55 kW conveyor belt length 4300 mm sieve 50 x 50 mm toothed upper pulling shaft toothed lower pulling shaft rotor width 560 mm rotor diameter 560 mm hydraulic lifting of the feed shaft transport dimensions (length / width / height) 550 / 230 / 120 cm weight ~ 3000 kg

Chipper / Shredder WEISS CR40/324MM CATALOG NO. 6907 TECHNICAL DATA - inlet of the loading hopper at the top 1980x1050mm - inlet of the loading hopper at the bottom 980x1050mm - outlet for chipped wood fi 210mm - working width of the rotor 980mm - main engine 30kW - pump motor 1.1 kW - number of knives 36 pcs - knife size 40x40mm - 18mm sieve - pressure drawer - electric autoreverse - dimensions length/width/height 2100x2030x2070mm - weight about 3500 kg - French production – like WEIMA WL 10 - New knives installed – autoreverse – pressure drawer - very good condition – used chipper Net price: PLN 108900 Net price: 23419EUR Net price calculated according to the exchange rate of 4.65 PLN/EUR (with larger exchange rate fluctuations, the price may change)

CATALOGUE NO. 6943 TECHNICAL SPECIFICATIONS - loading hopper inlet 1600x1500mm - rotor working width 1500mm - main engine 45kW - pump motor 5,5kW - number of knives 44pcs - knife size 50x50mm - sieve 59mm - pressure drawer - autorewers - dimensions length / width / height 3430x2800x2850mm - weight about 9000kg ADVANTAGES – French production - new knives put on – autorewers – pressure drawer – very good condition – used chipper Net price: 189900 PLN Net price: 42200 EUR Net price calculated according to the exchange rate of 4,5 PLN/EUR (with larger fluctuations in the exchange rate, the price may change)

CATALOG NO. 6926 TECHNICAL SPECIFICATIONS - loading hopper inlet 1200x1000mm - outlet for shredded wood + viper fi 200mm - rotor working width 980mm - main motor 30kW - pump motor 0,75kW - viper motor 0,55kW - number of knives 24pcs - knife size 30x30mm - sieve 10mm, 12mm - pressure drawer - electric autorewers - dimensions length / width / height 2470x2130x1720mm - weight about 3000kg ADVANTAGES C0fhenux8o – German production – autorewers – pressure drawer – viper – very good condition – used chipper Net price: 122900 PLN Net price: 27311EUR Net price calculated according to the exchange rate of 4,5 PLN/EUR (with larger fluctuations in the exchange rate, the price may change)

CATALOG NO. 6928 TECHNICAL SPECIFICATIONS - loading hopper inlet 1560x1300mm - rotor working width 1300mm - main engine 36kW - pump motor 2x3kW - number of knives 36pcs - knife size 40x40mm - sieve 30mm, 28mm - pressure drawer - electric autorewers - dimensions of the machine length / width / height 3400x2420x2820mm - control cabinet dimension L/W/H 1000x450x1900mm - dimensions of pumps length / width / height 800x700x850mm - weight about 5000kg ADVANTAGES – German production – for Weima WL 15 – autorewers – pressure drawer – hydraulic pressure drawer from above – improves machine efficiency – very good condition – used chipper Net price: 169900 PLN Net price: 37756EUR Net price calculated according to the exchange rate of 4,5 PLN/EUR (with larger fluctuations in the exchange rate, the price may change)

Wood chipper Mario Ferrari L4T2N 400x120 - Italian production - Year of production 1992 TECHNICAL PARAMETERS: - inlet width 400 mm - inlet height 120 mm - engine power 45 kW - autoreverse - upper pulling toothed shaft - two lower pulling toothed shafts - conveyor belt 2500 mm - two knives - rotor diameter 400 mm - rotor width 400 mm - power of feed motors 2 x 1.1 kW Transport dimensions 250x170x150 cm weight ~ 1500 kg

Laiotz A500/250 chipper - Italian production - autoreverse - Additional Top Roller TECHNICAL PARAMETERS: - material width max 500 mm - material height max 250 mm - engine power 90 kW - two knives - sieve 60x60 mm - rotor diameter 750 mm - rotor length 670 mm - three upper pulling rollers - three lower pulling rollers - conveyor belt 8000 mm - autoreverse - hydraulic shaft lifting - total power 100 kW Transport dimensions - 1200x200x170 cm - weight 7 t

Holz-Schleifmaschine VENJAKOB VBS 1300 x 2500 B.: 1989 Sanding width: 1300 mm Sanding height: max 150 Table width: 1550 mm Working length: 2500 mm Table height: 1000 mm infinitely variable feed Two grinding units 2 x 4,8 kW An aggregate does not have a brush. used, checked ! Dimensions: 2900 x 2200 x 2800 mm It is a brush grinder: Brush wear: 100 mm Brush diameter: 270 mm Flextrim brush set Brush speed: 960 1/min shaft diameter: 80 mm

Tip Length: Tip Width: Copying facility: Power: Speed: sufenless; Lots of accessories available!

Hacker RUDNICK & ENNERS Type: RE-TH 130/400/3 Year of construction: 1998 Connected loads: 400 V, with feeder vibrating chute with control box Drive power: 22 kW

mobile chipping machine incl. timber loading crane (Epsilon Q 170 Z 96) - Built on 3-axle semi-trailers with road approval - Fifth-wheel coupling - two-line air brake with ABS, hyd lowerable jockey wheel for independent transfer on paved surfaces further detailed data in the exposé

Hackeranlage Rudnick Enners 650/200 Motor 37kw vibrorinen Metaldetector kratzforder Containerbefillen

STEMAS LEV PA9050 grinding machine - serial number 9050R 35599, - consists of: 1 aggregate, 1 grinding group with 2 aggregates, 1 ball Ø250 mm, 1 table with balls - width 550 x 5000 mm, - belt width 80 mm - dimensions in mm: approx. 5100 x 2100 x 2000, - weight in kg: approx. 1500, - year of construction: 1999

HERMES, SAIT, MIRKA, VSM Machines for the packaging of abrasive materials. 1. Press for wide belts 2. Press for narrow belts 3. Paper cutter (wide belts) 4. Canvas cutter (wide belts) 5. Guillotine for cutting wide strips to length 6. Guillotine for cutting narrow strips to length 7. Machine for cutting jumbo rolls into narrower rolls 8. Machine for cutting already glued wide strips into narrower ones (eg: 600 mm  4 x 150 mm) 9. Press for crushing waste 10. Dust extractor 11. Compressor 12. Machine for applying glue to the tape for joining canvases 13. Machine for gluing endless belts for power tools (blue). Cutting, milling, gluing, cutting papers and abrasive cloths from Jumborola. 1. Paper (jumbo) - 13,105 m (approx. 18,000 m2) 2. Canvas (jumbo) - 5,000 m (approx. 7,000 m2) 3. Canvas and paper rolls 150-300 mm - approx. 18,000 m2 and approx. 7,000 m2

ORDER NO. 7188 TECHNICAL DATA - inlet width 600mm - inlet height 250mm - shaft width 600mm - shaft diameter 300mm - number of knives 32pcs - knife size 40x40mm - sieve dimensions 10mm, 12mm - toothed pulling shaft from above - shaft motor about 1.1kW - Electric autorewers - outlet for shredded wood fi 200mm, fi 300mm vibrogutter WRR 600 - vibrogutter motor power 1.8kW - vibrogutter length 3050mm - vibrogutter width 550mm - main motor 30kW - chipper dimensions length/width/height 2000x1600x1100mm - total dimensions of the vibrogutter: length/width/height 3050x700x750mm - weight 2280kg – made in Germany – used chipper, very good condition Net price: 146900 PLN Ex Tax: 33386EUR Net price calculated according to the exchange rate of 4,4 PLN/EUR (in case of major fluctuations in the exchange rate, the price may change)

vibratory feeder diameter range 2-6 mm total screw length 40 mm output - pieces/min 47

COMAFER grinder model DINAMIC MAC 500 for wood waste: - hourly production from 100 to 200 kg/h - rotor motor HP10 / kw 7.5 , volt 380 - rotor diameter D=160mm, with knives - Pneumatically operated feed drawer - Hopper dimensions 965 x 500 mm - Overall dimensions approx. 1.7 x 0.95 x h=1.5 m - weight about 800 kg - machine according to CE standards, year 2000 AVAILABILITY FROM APRIL 2024

WEIMA WL 6 I chipper Crusher from the German company WEIMA – documentation – year of production 1998 TECHNICAL PARAMETERS: filling dimension 800 x 1000 mm rotor diameter 175 mm rotor length 800 mm rotor speed 90 rpm V-rotor main engine 22 kW number of knives 21 pieces rotatable cutting knives 35 mm x 35 mm sieve diameter 20 mm and 15 mm AUTHOR-VERSE HYDRAULIC DRAWER pressure drawer height 175 mm connector diameter 200 mm dimensions (length/width/height) 230 / 140 / 160 cm weight 1400 kg

Sell mobile crusher of large pieces of wood. Turbodiesel engine, hydraulic drive, discharge conveyor

ATLAS scissor lift table, lifting capacity 4 t German production table size 3000 x 1200 mm lifting capacity 4000 kg height of the unfolded table 1195 mm height of the folded table 450 mm pump motor power 4 kW table weight 1500 kg

Approx. Onsite Dimension. (l x w x h): 200 x 200 x 200 mm, weight approx.: 10 kg

Approx. Onsite Dimension. (l x w x h): 370 x 280 x 50 mm, weight approx.: 5 kg

Approx. Onsite Dimension. (l x w x h): 370 x 280 x 50 mm, weight approx.: 5 kg

Approx. Onsite Dimension. (l x w x h): 370 x 280 x 100 mm, weight approx.: 5 kg

: Breite/Länge mm Motor output: 4,5 kW : m³ Diameter of the motor: mm Dimensions (L/W/H): mm Weight: 258 kg : mm Heating capacity: kW Number of ventilators: St. Year: 2022 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Without further data.

May not be complete! Already disassembled into 7 parts.