wood machine scm used for sale

Frame loose without packaging Auction-ID: A1-45889-2663

White plastic chair with upholstery Wooden feet dismantled Auction-ID: A1-45889-2666

Stainless steel railing with six posts Ground mounting screws As good as new 6 stainless steel struts plus handrail A total of two modules of 2 m each Height approx. 1.10m Auction-ID: A1-45889-764

Trade fair construction system Frame wall substructure wood-based material // Thickness 120mm // Height 2000mm Various dimensions Width 37 x 1000mm width 10 pcs 1000 x 500 7 pcs. 500 wide + different widths Auction-ID: A1-45889-2981

+4 modules sloping roof Auction-ID: A1-45889-359

Frame loose without packaging Auction-ID: A1-45889-2674

2 pieces bulk material container white, wooden lid and tension ring 113cm high 67cm diameter Auction-ID: A1-45889-2842

Spruce log trunk / 3.00m long / diameter approx. 50 cm / sawn in 50 mm / 6 planks Auction-ID: A1-45889-2850

2 pieces bulk material container white, wooden lid and tension ring 113cm high 67cm diameter Auction-ID: A1-45889-2848

Trade fair construction system Frame wall substructure wood-based material // Thickness 100mm // Height 2300mm Various dimensions Width 23 x 1000mm + different widths Auction-ID: A1-45889-820

2 pieces bulk material container white, wooden lid and tension ring 113cm high 67cm diameter Auction-ID: A1-45889-2837

Frame loose without packaging Auction-ID: A1-45889-2651

Auction-ID: A1-45889-2994

COMPLETE WASTE WOOD DISPOSAL LINE RUDNICK & ENNERS – built in 2011 For sale is a complete waste wood disposal plant of the Rudnick & Enners brand, built in 2011. The line consists of 20 positions and was used for the automatic removal, sorting and processing of rinds, chips and waste wood in a sawmill. The plant has a modular design, dismantled, in very good condition and immediately available. Technical Overview – Items 1 to 20 01 – TKF offset by reducer, W 600 mm 02 – Viborinne 1 trimming line, L 13.0 m, W 650 mm 03 – Viborinne 2-trimming line, L 15.0 m, W 650 mm 04 – Viborinne creel line, L 8.50 m, W 500 mm 05 – Viborinne 1-gang line, L 10.0 m, W 500 mm 06 – Viborinne 2-creel line, L 9.0 m, W 500 mm 07 – Viborinne creel roller table, L 7.50 m, W 500 mm 08 – Viborinne resawing line, L 11.0 m, W 650 mm 09 – Viborinne recut li ...

Chipping Capacity 100mm ; Blade Speed 2530rpm; Engine Type OHV 4-stroke; Starting System E-start; Displacement 420cc ; MAX Engine Speed 3600rpm; Fuel Type Unleaded Gasoline; Fuel volume 6.5L; Oil Volume 1.1L; DUCAR engine; 6780 Auction-ID: A1-45901-186

Chipping Capacity 50mm ; Blade Speed 3600rpm; Engine Type OHV 4-stroke; Starting System Recoil; Displacement 212cc ; MAX Engine Speed 3600rpm; Fuel Type Unleaded Gasoline; collect bag volume 40L; DUCAR engine; kit; 6779 Auction-ID: A1-45901-183

Chipping Capacity 100mm ; Blade Speed 2530rpm; Engine Type OHV 4-stroke; Starting System E-start; Displacement 420cc ; MAX Engine Speed 3600rpm; Fuel Type Unleaded Gasoline; Fuel volume 6.5L; Oil Volume 1.1L; DUCAR engine; 6780 Auction-ID: A1-45901-185

Chipping Capacity 50mm ; Blade Speed 3600rpm; Engine Type OHV 4-stroke; Starting System Recoil; Displacement 212cc ; MAX Engine Speed 3600rpm; Fuel Type Unleaded Gasoline; collect bag volume 40L; DUCAR engine; kit; 6779 Auction-ID: A1-45901-184

Chipping capacity 100mm; 224cc; EURO5; kit; New in the box. Auction-ID: A1-45901-20

Chipping Capacity 89mm ; Blade Speed 2400rpm; Engine Type OHV 4-stroke; Starting System recoil; Displacement 420cc ; MAX Engine Speed 3600rpm; Fuel Type Unleaded Gasoline; DUCAR engine; 6778 Auction-ID: A1-45901-181

Chipping Capacity 89mm ; Blade Speed 2400rpm; Engine Type OHV 4-stroke; Starting System recoil; Displacement 420cc ; MAX Engine Speed 3600rpm; Fuel Type Unleaded Gasoline; DUCAR engine; 6778 Auction-ID: A1-45901-182

• GROWI wood splitting plant • Type: GAS 850 • Year of construction 2025 • Serial number: 2025048 • Stationary firewood processing plant • Hydraulic splitting drive • Integrated chainsaw unit • Longitudinal conveyor belt / discharge belt • Robust steel construction • Control station with hydraulic control • Emergency stop available • CE version • Suitable for professional firewood operation • High work performance • Stable feet • Well-maintained condition • Ready to use • Ideal for forestry and firewood operations Auction-ID: 04C-FSE-3

Weima WL 6

Well preserved complete width frame - creel system LINCK type BV. Right-wing machine. Frame width 760 mm, stroke 600 mm, passage height max. 710 mm. Complete with log feeder, creel car with auxiliary car. Splitting wedge with roller conveyor, transverse take-off and model return. Creel with new saw clamps. Countershaft and frame including 132 kW motor with belt drive 310 1/min. Various spare parts can be purchased in a package. Dismantling on your own. Dismantling can be offered completely truck loaded.

Works perfectly The frame is supplied with the hardware Set of gouges supplied with the lathe Auction-ID: A3-43519-36014

Drive Type: Power Take-Off (PTO) Power requirements: 18 to 30 hp (13 to 22 kW) Hitch: 3 points (category 1) PTO: 540 rpm Max branch diameter: 10 cm ⸻ Grinding system • Cutting Disc System • Steering wheel: ± 45 cm (≈ 49 kg) • 2 adjustable blades • No Stress System (automatic power regulation) • Pilot System (machine control computer) ⸻ Power & Operation • Hydraulic feed rollers • Roll width: 200 mm • Roll diameter: 140 mm • Hydraulically adjustable speed • Electric forward/reverse controls ⸻ Dimensions / transport • Working dimensions: 1800 x 800 x 1930 mm • Transport dimensions: 1800 x 800 x 1930 mm • Folding hopper • Feed hopper: 1510 x 700 mm • Hopper inlet height: 950 mm • Discharge height: 1780 mm ⸻ Equipment • 270° swivel fireplace • Independent hydraulic pump with reservoir • Swivel service hood • Safety b ...

These include: gouges and chisels Auction-ID: A1-45979-213

The vacuum cleaner is in good condition. Functional. • Motorvermogen: 3 HP (~2.2 kW) • Toerental (rpm): 2800 ° 200L • Spanning: 220/380 V Dit betekent dat de motor zowel 230 V als 400 V compatibel is via ster/driehoek-schakeling (driefasig). • Attendance: 50 H Auction-ID: A3-43519-34057

Works perfectly Coach Long trolley Cutting length 127cm Presser Leitz tools Auction-ID: A3-43519-36011

The vacuum cleaner is in good condition. Functional. • Motor power: 2200 W (3 HP) • Power supply: 230 V – 50 Hz • Rotational speed: 2950 rpm • Propeller diameter: 300 mm • Number of connections: 3 x 100 mm • Air flow: 2864 m³/h • Capacity: 2 x 150 liters Auction-ID: A3-43519-34056

CNC - processing center Brand: COMEC Type: MD TOP The ideal CNC solution to process narrow and complicated work pieces EASY with COMEC processing length up to 2.000 mm Head configuration individually customizable for: - saw with 360° - axis - milling unit for horizontal and vertical processing - drilling head with separate jumping spindles vertical and horizontal - multiple spindle drilling heads separate jumping even horizontal - horizontal milling unit with 360° C - axis Special developed clamping table, moves automatically program controlled in X direction Furthermore, optionally available: - Automatic raw work piece feed with finished work piece return to the operator TPA control unit: CNC control with graphical user interface Parametric software with 3D modeling Necessary processing macros customized to you pre-installed

TIG Welding Machine, Electric Welding Machine KESTRA Type TIG 350 AC/DCE Welding MachineFabr. No. 09720693 Year of construction approx. 1985Power 350 Amp. = 60 % EDExsetting range 3 steps and fine adjustmentCurrent type AC / DCNet connection 400 volts, 50 Hz, 32 Amp. Plug- 4 meter hose package with TIG torch- 2 stroke / 4 stroke welding device- Water-cooled- Gas pressure reducing valveSpace requirement L x W x H 1050 x 560 x 900 mmWeight 250 kgThe welding test gives good results when welding stainless steel with

TIG welding machine, electric welding machine DALEX type TGKW 55 (AC-DC)Series No. 532521 year of construction approx. 1975Power 225 Amp. = 60 % ED 125 Amp. = 100 % EDEsetting range 2.8 to 225 ampereCurrent type direct current and alternating current (AC-DC)Mains connection 380 volts, 50 Hz- Power setting via 5 coarse steps and fine adjustment via rotary potentiometer infinitely variable- 2-stroke and 4-stroke welding device- Remote controller with rotary potentiometer for fine adjustment- Digital display for ampere- TIG hose package 4 meters- Welding gas pressure reducing valve-

PADE model 1000/N trimming-milling-drilling machine: – automatic sliding worktop – blade for header D=400mm, 3 hp motor – milling machine with shaft D=30mm, 5 hp motor – 5-spindle drilling machine, 360° adjustable, 3 HP motor Machine not CE compliant, for export

Specifications / Technical Data S-1000 CNC-Fraese and Engraving Machine The almost largest CNC machine in the High-Z series. With an external dimension of approx. 1350 x 800mm still handy enough and extremely powerful. With the High-Z CNC unit, they acquire an all-round talent in TUeV-certified quality (EMC). Whether you want to clamp complex parts on a groove table or, or to clamp factory tins into a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All CNC portal fraes machines are supplied with coloured energy chains on all axes due to the improved cable guid ...

Carrier bag machine / SOS block bottom bag machine with flat inside handle unit Bag width: 14-32cm Tube length: 35-70cm Bottom width: 6-20cm Reel width: 107cm max Hot Melt unit for handles Web guide system for handles Foto cell unit for preprinted paper Aprox 7 former plates Option: 4 colour tail end printer (ref. S294)

Motor power: 1,5 kW. Max. mortise width: 180 mm. Max. mortise depth: 180 mm. Chain width: 2x10 mm. Machine dimensions: 600x950x1900 mm. Weight: ~200 kg.

A good sample preparation in metallography (materialography) starts at the correct separation with a wett cutting machine. Good and proper separation prevents the burning and destruction of the material change in its structure and is the best way to save time and consumables. The separation is performed incorrectly is this very elaborate grinding and polishing extremely high overhead "punished"! Wet cutting machine cutting. Wet abrasive cutting | Separating SCHNEIDER METACUT 251 The head of the cutting grinding machine with built-in blade is lowered by a hand lever on the sample. METACUT 251 separating cutters are available exclusively in manual versions. This is usually not a disadvantage: the specimen geometry changes / separation task all the time, so can hinder the establishment of an automatic cut-off grinder. The workpiece is clamped at METACUT 251 - cut-off machines and the de ...

FORCIPOL - the quality grinding machine / polishing machine for metalography that is cheap on the market - from the simple grinding machine for manual preparation to the semi-automatic machine - The FORCIPOL series is modular and can be assembled as required FORCIPOL 102: Basic grinding machine / polishing machine with a grinding wheel 250 mm and basic control FORCIPOL 202: as before, but 2 grinding wheels 250 mm For rationalization and reproducible cuts (can be combined with FORCIPOL 102 or 202): FORCIMAT 52: Sample wineer head with simple control FORCIMAT 102: Sample winer head with programmable control For the supply of lubricants and suspensions (only IN the case of FORCIMAT 52 / 102) DOSIMAT 12 - Lubricant Dosing Device DOSIMAT 52 - Lubricant and suspension dispenser (adjust integrated internal control on the device) DOSIMAT 102 - Lubricant and suspension dispenser  ...

Copying fraes machine Kuhlmann Type GM 1-2 Machine in very good condition. Optional: very extensive access at an additional cost Zubehoer s/he/sheers, milling spindles, sub-machines for circular copying, written fonts, fraesstichel with quick-change device, copy spin, Radient template for radii in 0.5mm rising, clamping devices, Stencils and much more! Special price Tool cabinets milling spindle spindle grasses engraving fonts brass copper table

Kettenstemmer GF L x W x H: 120 x 70 x 270 cm Weight 570 kg Baeqvhtqms Year of construction 1983 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Pot discs - diameter:175 mm spindle extension:180 mm operating voltage:400 V Machine weight approx.:300 kg room requirements approx.:0.90 x 0.60 x 1.80 m

La San Marco NEW 105 MULTIBOILER 2G portafilter machine Original price 8.800 ,- € In the NEW 105 Multiboiler series, the latest technology from La San Marco has been applied. Multiboiler technology allows precise temperature control for each boiler of each individual group. The temperature is set in a simple and intuitive way on the keyboard of each group. The boiler for steam and hot water has an electronic automatic temperature adjustment, which can be easily adjusted using the touchscreen keyboard. The innovative keyboard with touchscreen technology is complemented by a graphic RGB display. Setup and program advice is simple and intuitive, and the display also provides a range of information that is of great benefit to the operator. The illumination of the workstation with customizable multicolor LED makes the machine even more ergonomic with an eye on aesthetics. Grou ...

Carrier bag machine, SOS block bottom bag machine with flat inside handle unit Photo cell 4 colour tail end printer Bottom patch Bag with handles: Bag width: 20-32 cm Tube length: 33-66 cm Bottom width: 7-18 cm Bag without handles: Bag width: 16-32 cm Tube length: 24-90 cm Bottom width: 7-18 cm

Combi with 11.1.073 Novopac Shrink tunnel Remaining: 3 parts Chassis number: 4395905 Weight: 1,0 tons Power: 4 kW Air pressure: 7 bar L x w x h first part: 2600 x 1700 x 2000 L x w x h second part: 3200 x 2400 x 1700 L x w x h third part: 1775 x 3300 x 1500 Working height: 85 cm. Transport size L x W x H: 2,6 x 1,7 x 2,0 + 3,2 x 2,4 x 1,7 + 1,775 x 3,3 x 1,5 Min.-max. glass thickness: Max 300 mm Min.-max glass size: Max 1460 mm width Condition machine : Repaired after malfunction Control type: Automatic Electric. Connection: 400V Documentation: Available Instructions: Available Electric diagram: Available Parts list: No Remaining: Combi with no. 23073 Photos/film available: Photo's available

The servoCUT 402 / 502 / 602 cutting machines is designed as a wet cutting grinding machine for cutting large / small / regularly / irregularly shaped workpieces made of metal ceramic or material compositions. Thanks to the modern joystick control, the separation process can start after just a few seconds: position the test piece clamping, the cutting disc with joystick in a hurry, press START and leave the machines (unmanned). Depending on the version available as a fully automatic version (X-Y-Z axes motorized) or manual axle delivery. The ideal equipment for all applications - enormously flexible, ergonomic operation with quick start, suitable for the smallest workpieces but also for long test pieces (driving cut) - the ideal solution for the professional (service provider in material testing, contract hardening, ...) and for difficult materials (pulse cutting, etc.) The SERV ...

The SERVOCUT 602 cutting machine is designed as a wet cutting grinder for cutting large / small / regularly / irregularly shaped workpieces made of metal ceramics or material compositions. Thanks to the modern joystick control, the separation process can start after just a few seconds: position the test piece clamping, the cutting disc with joystick in a hurry, press START and leave the machines (unmanned). Depending on the version available as a fully automatic version (X-Y-Z axes motorized) or manual axle delivery. The ideal equipment for all applications - enormously flexible, ergonomic operation with quick start, suitable for the smallest workpieces but also for long test pieces (driving cut) - the ideal solution for the professional (service provider in material testing, contract hardening, ...) and for difficult materials (pulse cutting, etc.) The SERVOCUT cutting machines ...

Attention: Before purchasing a used universal tester / tractor, consider the old, used machine (all?) need new electronics for WIN 10. No manufacturer / Microsoft provides support for WIN XP / 7 – an expensive impasse! Purchase, pickup, software update (if possible?), commissioning, modernization are more expensive than a new galDABINI machine Quasar 600 kN incl. load cell 600 kN, Latest technology (BECKHOFF Elektronik) with first-class software LabTest. Suitable for tensile tests, pressure tests, bending tests and cyclic tests stable, using finite elements FEM, 2-line universal test era Optional load cells N: 10 | 20 | 50 | 100 | 250 | 500 or kN 1 | 2.5 | 5 | 10 | 25 | 50 | 100 | 200 | 250 for tests on steel, reinforced steel, plastic, rubber, foils, textiles, wire, sheet metal, components, assemblies and many more. Very well Made in Italy | Europe, German + European Q ...

TECHNICAL DATA: Max oscillation length mm: 100 Max depth of slots mm: 80 Spindle center distance min mm: 84 / max 1170 Spindle rotation rpm: 6.000 / 12.000 Processing: double sided Weight Kg: 2250