wood heat used for sale

HOT AIR GENERATOR by wood . NEW machines in prompt delivery model F28 , F55CV , F85CV , F120CV Availability : ready in stock ( unless sold ) CE mark : Yes Declaration CE : Yes Instruction Manual ( Yes )

Jusan shear for cutting uncoiled wood. Includes drive belt for the sheet and two 80% blades. It works perfectly and can be viewed at any time.

I sell the wood dryers NARDI for 30m3 wood. Control panel Nardi, a savings computer. Volume net wood 25-30 m3. 4 fans side by side Chamber 9x4x h.3m Door on each side, flow system. Without rails. Condition very good, worked very little Car, electrics and fans without any problems. Available same. Already dismantled.

Stencil lathe Manufacturer: Hempel Model: HH 9 Heavy-duty version with oil-hydraulic control Max.: Workpiece length: 900mm Hydraulic sliding supports: 5 pcs.

Wemhöner Wood Press Size : 250 cm x 120 cm Double table Machine is in a good working condition

This Busellato Jet Optima T5 Wood working machine was manufactured in the year 2018. It is equipped with a TPA control unit and has 5 axis.

- German production - autorewers - for the production of technological wood chips - powerful shaft with a diameter of 650 mm TECHNICAL PARAMETERS: - slot width 550 mm - inlet height 260 mm - two knives - engine power 110 kW - conveyor length 5000 mm - sieve 50 x 50 mm - three upper shafts pulling toothed - four lower shafts pulling toothed - rotor width 650 mm - rotor diameter 650 mm - hydraulic lifting of feed shafts - feeder height from the base 1100 mm Transport dimensions 1100x245x240 cm weight about 10 t

This HOMAG BAZ20/50/16/K Wood working machine was manufactured in the year 1998. It is equipped with a PC 85 mit SPS control unit. The machine has a spindle speed of 17500 rpm.

– German production –DTR TECHNICAL PARAMETERS: width 400 mm height 120 mm rotor diameter 430 mm rotor length 430 mm engine power 37 kW motor power 2 x 2.2 kW number of knives 2 pieces sieve 60 x 60 mm two lower toothed shafts upper toothed shaft tray length 4900 mm wood chip chute with sieve transport dimensions (L/W/H) 850 / 245 / 220 cm weight ~ 2500 kg

This Biesse Rover 321R Machining Wood Working machine was manufactured in the year 1995 in Italy. It is equipped with a CNI NC 481 control unit. The machine has a spindle speed of 15000 rpm.

This BIESSE Rover 321 R Wood machine was manufactured in the year 1998 in Italy.

This HOLZHER PRO MASTER 7018 Wood Working was manufactured in the year 2020 in Austria. Has never been used.

This PANHANS EURO 5 Wood working machine was manufactured in the year 2009 in Austria.

– after technical inspection – German production – year of production 1999 TECHNICAL PARAMETERS: inlet hole 600 x 800 mm rotor diameter 175 mm rotor length 600 mm total power 18,5 kW number of knives 14 pieces rotatable cutting knives 30 mm x 30 mm sieve fi 15 and 12 mm AUTOREWERS HYDRAULIC DRAWER pressure drawer height 180 mm rotor rotations 80 -120 rpm extraction connection diameter fi 200 mm dimensions (L/W/H) 200 x 120 x 120 cm weight 1200 kg

4 axes machining dimension max Y1650 mm - X4600 mm Machining in height Z180 mm 14 position tool magazine 8 SCHMALZ brackets the machine is plugged in, testing is possible

– after technical inspection – very good condition – Austrian production TECHNICAL PARAMETERS: hopper dimensions 120 cm x 100 cm power 2 x 11 kW four shafts rotor length 400 mm rotor diameter 300 mm sieve fi 30 mm autorewers dimensions (L/W/H) 140 / 130 / 200 cm weight 600 kg

– after technical inspection – very good condition –documentation TECHNICAL PARAMETERS: infeed size 800 x 1000 mm rotor diameter 175 mm rotor length 800 mm rotor rotation 90 rpm V-rotor main engine 18,5 kW number of knives 18 pieces rotatable cutting knives 40 mm x 40 mm sieve fi 20 mm and 15 mm AUTOREWERS HYDRAULIC DRAWER pressure drawer height 175 mm connection diameter fi 200 mm dimensions (L/W/H) 230 / 140 / 160 cm weight 1400 kg

Copy lathe Brand: Röhrsdorfer model: 83 199 Year of construction: 1987 Workpiece length 100 - 460 mm Kantel dimensions: 20 x 60 mm Equipment: Workpiece magazine Turning knives Template-controlled rotary blade knife, 3x

Description: Wood Troley Table 840 x 350 mm Approx. Onsite Dimension. (l x w x h): 2,000 x 550 x 1,150 mm, weight approx.: 75 kg

Very little used CNC machining center for wood and plastics. In addition, a chip extraction unit with 3 capacitive filters of 10 kw has been added.

Approx. Onsite Dimension. (l x w x h): 200 x 200 x 200 mm, weight approx.: 10 kg

Approx. Onsite Dimension. (l x w x h): 370 x 280 x 50 mm, weight approx.: 5 kg

Approx. Onsite Dimension. (l x w x h): 370 x 280 x 50 mm, weight approx.: 5 kg

Approx. Onsite Dimension. (l x w x h): 370 x 280 x 100 mm, weight approx.: 5 kg

Wood Heated

Without further data.

Height adjustable

May not be complete! Already disassembled into 7 parts.

Press-wire with HDTV automatic assembly for doors model Door Assembler 2800 (MH9328) Quantity: 1 Location: Kaliningrad Release year: 2020 Country of origin: China Optional: Press-wire with HDTV assembly automatic door model Door Assembler 2800 (MH9328) Min. door leaf size: 1000x450mm, Max. door leaf size: 2800x1400mm, Max. workpiece section: 150x60mm, total power: 8.9 kW.

The Colombo AM 60, crafted in 2006, is a specialized woodworking machine built for precision and versatility. With a 4kW cutting unit, it accommodates 400/500mm blades, achieving speeds of 3000 rpm. The cutting heights reach 100mm with a 400mm blade and 155mm with a 500mm blade. An 11kW pinning shaft, with a diameter of Ø50mm and a length of 600mm, supports tools up to 300mm. Its advanced feeding system, rated from 5.5kW to 15kW, adjusts electronically. Contact us for further details.

Working area: 2890mm x 900mm x 80mm, axis working paths: X/Y/Z: 3270mm/1200mm/115mm, max. vector axis speed: 75mm/min. Spindle speed: 1200-18000rpm, max. panel thickness: 80mm, control: TRIA 7500. Dimensions X/Y/Z: 4400mm x 2865mm x 2350 mm, weight: 3000 kg. Defects: Screen, ball bearing of the Z-axis.

SECOND-HAND HOT PRESS ORMA MOD. NPC-6/100 - New PLC with TOUCH SCREEN - Platens dimensions 2500X1300 mm - Additional plate - N. 6 cylinders - CE rules - Year 2001 - Kw 2.2 - Complete with manual and CE certificate

CATALOG NO. 6875 TECHNICAL DATA - inlet width 720mm - inlet height 160mm - thickness of the shredded material 160mm - roller width 720mm - shaft diameter 600mm - knife length 80mm - number of knives 4×12pcs - 25mm sieve dimensions - pressing roller at the input 0.75 kW - toothed shaft pulling from the bottom 1.8 kW - toothed shaft pulling from above 1.8 kW - length of the vibrochute 4470mm - width of vibrochute 710mm - 2.2 kW vibrating motor - main engine 55kW - autoreverse - diameter of the extraction spigot 260mm - dimensions of the vibro-chute length/width/height 4470/950/930mm - machine dimensions length/width/height 3100/1500/1170mm - total weight about 5500 kg – German production - very low mileage – original documentation – used chipper, very good / perfect condition Net price: PLN 169900 Net price: 36538EUR Net price calculated according t ...

vibratory feeder diameter range 1-4 mm total screw length 30-40 mm output - pieces/min 63

Vecoplan VTH/55/15/2 edging chipper – German production – autoreverse – for the production of technological chips – year of manufacture 1995 TECHNICAL PARAMETERS: inlet width 550 mm inlet height 130 mm two knives engine power 55 kW conveyor belt length 4300 mm sieve 50 x 50 mm toothed upper pulling shaft toothed lower pulling shaft rotor width 560 mm rotor diameter 560 mm hydraulic lifting of the feed shaft transport dimensions (length / width / height) 550 / 230 / 120 cm weight ~ 3000 kg

Capacity (x): 16 Process Application: 180   Other Info: 1 Number of T slots:       8 Jump from T to T:        200mm T size:                  22mm Number of matching pieces:2 units Length:                  850mm Width:                   800mm Height:                  1640mm Weight:                  1800kg

Capacity (x): 170 Process Application: 3   Other Info: 1 Number of T slots:       14 Jump from T to T:        170mm T size:                  22mm Number of matching pieces:3 Length:                  1200mm Width:                   1000mm Height:                  2500mm Weight:                  2600kg

Chipper / Shredder WEISS CR40/324MM CATALOG NO. 6907 TECHNICAL DATA - inlet of the loading hopper at the top 1980x1050mm - inlet of the loading hopper at the bottom 980x1050mm - outlet for chipped wood fi 210mm - working width of the rotor 980mm - main engine 30kW - pump motor 1.1 kW - number of knives 36 pcs - knife size 40x40mm - 18mm sieve - pressure drawer - electric autoreverse - dimensions length/width/height 2100x2030x2070mm - weight about 3500 kg - French production – like WEIMA WL 10 - New knives installed – autoreverse – pressure drawer - very good condition – used chipper Net price: PLN 108900 Net price: 23419EUR Net price calculated according to the exchange rate of 4.65 PLN/EUR (with larger exchange rate fluctuations, the price may change)

ACM slitting saw Cutting length 3000mm Height 120mm CE Certificate Machine already in May in my warehouse

For sheets, plates, etc. With horizontal feeder Working width 1050 mm, max. inlet height 50 mm Open rotor 600 mm diameter with 4 blades 2 stator knives Main engine 75 kW

Inlet opening: approx. 1000 x 1700 mm Rotor width: approx. 700 mm Rotor diameter: approx. 1000 mm Stator knives: 2 Rotor blades: 10 Propulsion: 110 kW

Feeder opening: 760mm x 570mm; Funnel Contents: Throughput : Material and screen dependent; Rotor diameter: 240 mm ; Rotor length: 350 mm; Blades: 12 knives on the rotor + 2x knives on the side; Knife size: 30mm x 30mm; sieve blockage: 25mm; hydraulic moving floor: Yes; Suction nozzle: 160mm; Power consumption: 6 kW; Noise level: 90 dB (A); Dimensions: 1,250 mm x 900 mm x 1450mm (L x W x H); Weight: 600 kg; Engine kW 5.5 IE2 (High Efficiency); Hydraulic power kW 0.5; Total installed power kW 6. Dimensions: H 1.450 mm x 1.250 mm x 900 mm. Kg 600. loading opening: 760 mm x 570 mm; rotor: à ̃ 240 mm x 350 mm; working width: 350 mm. N 12x knives (central) + 2x knives (side); knife 30 mm x 30 mm with hollow side, screwed with conical screw for better fastening; N 1x grid supplied, sieve to choose between à ̃ 12mm and à ̃ 25 mm. With ABB inverter to control worker mo ...

CATALOG NO. 6926 TECHNICAL SPECIFICATIONS - loading hopper inlet 1200x1000mm - outlet for shredded wood + viper fi 200mm - rotor working width 980mm - main motor 30kW - pump motor 0,75kW - viper motor 0,55kW - number of knives 24pcs - knife size 30x30mm - sieve 10mm, 12mm - pressure drawer - electric autorewers - dimensions length / width / height 2470x2130x1720mm - weight about 3000kg ADVANTAGES C0fhenux8o – German production – autorewers – pressure drawer – viper – very good condition – used chipper Net price: 122900 PLN Net price: 27311EUR Net price calculated according to the exchange rate of 4,5 PLN/EUR (with larger fluctuations in the exchange rate, the price may change)

ORDER NO. 6955 TECHNICAL SPECIFICATIONS - loading hopper inlet L x W 1070x710mm - outlet for shredded wood fi 200mm - rotor working width 700mm - main engine 18,5kW - pump motor 1,5kW - number of knives 21pcs - knife size 35x35mm - sieve 50mm - pressure drawer - electric autorewers - dimensions length / width / height 1700x1300x1640mm - weight 1780kg ADVANTAGES – German production – autorewers – pressure drawer – very good condition – used chipper Net price: 67900 PLN Net price: 15089 EUR Net price calculated according to the exchange rate of 4,5 PLN/EUR (with larger fluctuations in the exchange rate, the price may change)

CATALOGUE NO. 6943 TECHNICAL SPECIFICATIONS - loading hopper inlet 1600x1500mm - rotor working width 1500mm - main engine 45kW - pump motor 5,5kW - number of knives 44pcs - knife size 50x50mm - sieve 59mm - pressure drawer - autorewers - dimensions length / width / height 3430x2800x2850mm - weight about 9000kg ADVANTAGES – French production - new knives put on – autorewers – pressure drawer – very good condition – used chipper Net price: 189900 PLN Net price: 42200 EUR Net price calculated according to the exchange rate of 4,5 PLN/EUR (with larger fluctuations in the exchange rate, the price may change)

CATALOG NO. 6928 TECHNICAL SPECIFICATIONS - loading hopper inlet 1560x1300mm - rotor working width 1300mm - main engine 36kW - pump motor 2x3kW - number of knives 36pcs - knife size 40x40mm - sieve 30mm, 28mm - pressure drawer - electric autorewers - dimensions of the machine length / width / height 3400x2420x2820mm - control cabinet dimension L/W/H 1000x450x1900mm - dimensions of pumps length / width / height 800x700x850mm - weight about 5000kg ADVANTAGES – German production – for Weima WL 15 – autorewers – pressure drawer – hydraulic pressure drawer from above – improves machine efficiency – very good condition – used chipper Net price: 169900 PLN Net price: 37756EUR Net price calculated according to the exchange rate of 4,5 PLN/EUR (with larger fluctuations in the exchange rate, the price may change)

We offer: Chipboard, used 1 plate, approx. 2,080 x 1,180 x 38 mm 5 piece(s) in stock 21698 Harsefeld Per piece € 37.00 net plus 19 % VAT from stock 21698 Harsefeld. Price only valid while stocks last. Errors and omissions excepted. We are a commercial provider – VAT invoice. Price only valid while stocks last. Errors and omissions excepted. We are a commercial provider – VAT invoice.

Disc lathe Lathe for plates, bowls, rings, wheels, etc. Manufacturer: Hempel Model: ERSP / ER/Sp 4 Workpiece diameter: max. 400 mm Workpiece thickness: max. 80 mm

Wood chipper Mario Ferrari L4T2N 400x120 - Italian production - Year of production 1992 TECHNICAL PARAMETERS: - inlet width 400 mm - inlet height 120 mm - engine power 45 kW - autoreverse - upper pulling toothed shaft - two lower pulling toothed shafts - conveyor belt 2500 mm - two knives - rotor diameter 400 mm - rotor width 400 mm - power of feed motors 2 x 1.1 kW Transport dimensions 250x170x150 cm weight ~ 1500 kg