wood chipper used for sale

Filing cabinets wood grey approx. 250x50x225cm (WxDxH), former item 408

Electric Grill + Smoker + Airfryer NINJA Woodfire, new product from 2026

Shaft : Diameter: Ø 50 mm Working length above table: 150 mm Vertical shaft stroke: 205 mm Rotational speeds: 3,000 / 4,500 / 6,000 / 7,000 rpm Attachment: Machine with drive Dimensions (estimate): approx. 1,800 × 1,300 × 1,350 mm (to be confirmed) Weight (estimate): approx. 780 kg (to be confirmed) Auction-ID: A1-45443-76

ZENO Zerkleinerungsmaschinenbau Norken GmbH ZTLL 1000x1200 Waste shredder in use until 03/2026 in good used condition Masch. No. 98A-4689 Standard version, screen hole 20mm Low-speed with moving floor Main drive 18.5 kW, hydraulics 0.75 kW 400/690 V, total rated current 36A Fuse 63A Conductor cross-section 4x16 square Weight 1950 kg, 20 cutting edges Rotor speed 140 rpm Rotor diameter 300 mm Extraction diameter 250 mm Exhaust air speed 30 m/s Inlet cross-section L 1000mm W 800mm External magnetic separator Spare blade

Drive Type: Power Take-Off (PTO) Power requirements: 18 to 30 hp (13 to 22 kW) Hitch: 3 points (category 1) PTO: 540 rpm Max branch diameter: 10 cm ⸻ Grinding system • Cutting Disc System • Steering wheel: ± 45 cm (≈ 49 kg) • 2 adjustable blades • No Stress System (automatic power regulation) • Pilot System (machine control computer) ⸻ Power & Operation • Hydraulic feed rollers • Roll width: 200 mm • Roll diameter: 140 mm • Hydraulically adjustable speed • Electric forward/reverse controls ⸻ Dimensions / transport • Working dimensions: 1800 x 800 x 1930 mm • Transport dimensions: 1800 x 800 x 1930 mm • Folding hopper • Feed hopper: 1510 x 700 mm • Hopper inlet height: 950 mm • Discharge height: 1780 mm ⸻ Equipment • 270° swivel fireplace • Independent hydraulic pump with reservoir • Swivel service hood • Safety b ...

Table: Dimensions: 1200 x 800 mm Worktop height: 890 mm Geometry: Shaft / front of table face: 390 mm Shaft / front extension distance output: 860 mm Shaft : Rotational speeds: 3000 / 4500 / 6000 / 9000 rpm Diameter: Ø 50 mm Interchangeable fixed shaft – Morse taper n°5 Standard shaft stroke: 185 mm Tools: Maximum tool diameter: Ø 50 / 40 / 30 mm Motorization: Motor power: 5.5 kW Standard TS50 router: 5.5 – 7.5 kW / 400 V Weight: Approx. 720 to 900 kg Auction-ID: A1-45443-75

Usable working area: X: 3248 mm Y: 1390 mm Z: 110 mm Configuration: 16-core drill head 8 kW electro-chuck – ISO30 8 kW frequency inverter Saw for longitudinal incisions Horizontal milling unit with 1 output – 2.2 kW 10-position tool magazine – ISO30 carriage edge Adapter support plate for index heads Table: Work table with bars and suction cups 2 stops per bar 6 × suction cups 114 × 140 mm – H 100 (to be confirmed) 6 × suction cups 125 × 75 mm – H 100 longitudinal (to be confirmed) Equipment: Vacuum pump 100 m³/h CN on external PC (PC included) 17\"PC TFT display and instructions in English Power supply: 400 V – 50 Hz Compliance: CE safety standards STANDARD version Dimensions (estimated): Length approx. 6,500 mm × Width approx. 4,100 mm × Height approx. 2,400 mm (to be confirmed) Weight (estimate): approx. 5,000 kg (to be confirmed) Auction-ID: A1-45443-70

Usable working area: X: 4970 mm Y: 1390 mm Z: 110 mm Configuration: 16-core drill head Electro-chuck 8 kW – ISO30 Frequency inverter 8 kW Saw for longitudinal incisions Horizontal milling unit with 1 output – 2.2 kW 8-position tool magazine – ISO30 carriage edge Adapter support plate for index heads Table: Work table with bars and suction cups Pneumatic locking table 2 stops per bar 8 × suction cups 114 × 140 mm – H 100 (to be confirmed) 8 × suction cups 125 × 75 mm – H 100 longitudinal (to be confirmed) 8 × suction cups 120 × 50 mm – H 100 longitudinal (to be confirmed) 8 front stops + 2 additional side stops Equipment: Vacuum pump 250 m³/h CN on external PC (PC included) 17\" PC TFT displayMastercabinet Level 1 Power supply: 400 V – 50 Hz Compliance: CE safety standards version L Dimensions: Estimated height: approx. 2400 mm (to be confirmed) Auction-ID: A1 ...

WEINIG UNICONTROL 10 3-spindle machining centre , cut-off saw and glazing saw. Width 30–220 mm, height 30–100 mm, length 330–2600 mm. Outputs 7.5–12 kW, speeds 2800–7000 rpm. Spindles Ø40 mm, transverse clamping 240 mm, longitudinal 160–240 mm. Estimated weight 2500 kg. Auction-ID: A1-45443-63

Capacities : Thickness × width: 120 × 230 mm Minimum / maximum width: 20 – 230 mm Minimum / maximum height: 8 – 120 mm Minimum length single piece: 750 mm Speeds: Variable feed: 5 to 24 m/min Spindle rotation speed: 6,000 rpm Composition and equipment: 2,500 mm Input table 2,500 mm Motorised adjustment of machining width and height Adjustments accessible on the front panel with the hood closed SIKO digital meters on each setting Wrap-around and sound-absorbing enclosure with panoramic bay Tool shafts Ø 40 mm Shaft configuration (7 shafts): Lower horizontal shaft: 5.5 kW (7.5 hp) Right rotor: 11 kW (15 hp) Left rotor: 11 kW (15 hp) Vertical shaft: 5.5 kW (7.5 hp) Upper horizontal shaft: 7.5 kW (10 hp) Lower horizontal shaft: 7.5 kW (10 hp) Universal shaft: 5.5 kW (7.5 hp) Dimensions (estimated)Approx . 5,800 × 2,100 × 1,900 mm (to be confirmed) Weight (estimate): Approx. 4 ...

Capacity: 230 × 120 mm Configuration : 5 shafts Jointer: 5 kW Right rotor: 7.5 kW Left rotor: 7.5 kW Planer: 7.5 kW Universal shaft: 5.5 kW Drive: 1.1 kW Speeds per inverter Digital up, down and planer shaft Digital left rotor SIKO mechanical digital counters on each axis movement + digital display on the board Helical tool holders with carbide inserts Tables: Inlet table 2,500 mm Suction: 4 × Ø 120 mm 1 × Ø 150 mm Machine dimensions: 3,900 × 1,450 × 1,540 mm Compliance: CE standard Special data: Integrated table lubrication insert Front drive roller jointer with manual retracting Motorized polyurethane roller at the outlet Safety: Protector: yes Auction-ID: A1-45443-72

Capacity: 180 × 100 mm Configuration: 4 shafts Bottom with reference: 4 kW Right: 3 kW Left: 3 kW Top: 4 kW Electric raising and lowering 4 tool holders included Chain drive Jointing table 1.70 m Dimensions (estimate): approx. 2,900 × 1,600 × 1,600 mm (to be confirmed) Weight (estimate): approx. 1,750 kg (to be confirmed) Auction-ID: A1-45443-71

Packing table metal wood white worktop grey approx. 180x60x85/150cm (WxDxH), paper roll holder, 3 drops for waste separation system

The Robland X31 is a wood-fired combination machine made in Belgium. It combines several machines into one, which saves space in a workshop. It generally combines 5 to 7 functions: - Circular saw - Spinning top - Jointer - Planer (planer-jointer) - Mortising machine The idea: to replace several separate machines with a single one. ⚙️ Technical data (approx.) Jointing width: ~310 mm Planing height: ~230 mm Saw blade: ~250 mm (tiltable up to 45°) Motors: often 3 motors of about 2.2 kW Weight: ~600 to 700 kg Benefits Significant space saving Versatility: allows you to do almost everything in carpentry Robust construction (cast iron, Belgian manufacture) Ideal for small workshops or garages Sold as is - see photos Auction-ID: A3-43506-32007

- Travel speed 666 mm/sec. - Vacuum turbine with 7.50 KW power. - Power chuck 6 KW, rotation speed 18000 rpm. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-51

Construction: One-piece cast iron frame Table: Width: 1,200 mm Depth: 800 mm Shaft : Diameter: 50 mm Rotational speeds: 3,000 / 4,500 / 6,000 / 9,000 rpm Equipment: Swivel micrometric guide Shaft clearance under the table Foot brake Shaft locking at the foot Dimensions (estimate): approx. 1,900 × 1,250 × 1,250 mm (to be confirmed) Weight (estimate): approx. 820 kg (to be confirmed) Auction-ID: A1-45443-74

Scrap wood chippers, wood shredders, wood shredders, chippers, slow-speed moving floor chippers overhauled WEIMA Type: WL10 Year of Make: 1993 Rotor diameter 250 mm Motor power 22 KW Rotor length 98 cm Filling funnel approx. 120 x 100 cm Number of blades: 24 pcs. Knife size 30 x 30 mm Sieve 30 mm incl. 2nd sieve 40 mm Dimensions approx. 2.5 x 1.7 x 1.85 m Weight approx. 2500 Kg Machine has been overhauled - Rotor shaft remounted. - Paintwork renewed - Sliding rails moving floor renewed - Oils changed - Rotor shaft overhauled (partly new blades and holders) Condition see pictures, or follow the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. The items can be picked up by yourself or shipped at the e ...

Drive Type: Power Take-Off (PTO) Power requirements: 18 to 30 hp (13 to 22 kW) Hitch: 3 points (category 1) PTO: 540 rpm Max branch diameter: 10 cm ⸻ Grinding system • Cutting Disc System • Steering wheel: ± 45 cm (≈ 49 kg) • 2 adjustable blades • No Stress System (automatic power regulation) • Pilot System (machine control computer) ⸻ Power & Operation • Hydraulic feed rollers • Roll width: 200 mm • Roll diameter: 140 mm • Hydraulically adjustable speed • Electric forward/reverse controls ⸻ Dimensions / transport • Working dimensions: 1800 x 800 x 1930 mm • Transport dimensions: 1800 x 800 x 1930 mm • Folding hopper • Feed hopper: 1510 x 700 mm • Hopper inlet height: 950 mm • Discharge height: 1780 mm ⸻ Equipment • 270° swivel fireplace • Independent hydraulic pump with reservoir • Swivel service hood • Safety b ...

Mitre saw OMS INVINCIBLE OK 330 CE Maximum cutting length 3000mm Maximum cutting width 140mm Units adjustable at an angle of 45/-45° Motor power 2×1.8kw 330mm saws Pneumatic Vertical Material Clamping Net price

3-piece - with keys Auction-ID: A1-44654-96

Good condition Auction-ID: A7-45427-91

Mitre saw OMS INVINCIBLE OK 330 CE Maximum cutting length 3000mm Maximum cutting width 140mm Units adjustable at an angle of 45/-45° Motor power 2×1.8kw 330mm saws Pneumatic Vertical Material Clamping Net price

3-piece - with keys Auction-ID: A1-44654-93

Dim. per table approx. height 47 and Ø76 cm. - height 39 cm. and Ø56 cm. - height 35 cm. and Ø41 cm. Auction-ID: A1-44654-136

• GROWI wood splitting plant • Type: GAS 850 • Year of construction 2025 • Serial number: 2025048 • Stationary firewood processing plant • Hydraulic splitting drive • Integrated chainsaw unit • Longitudinal conveyor belt / discharge belt • Robust steel construction • Control station with hydraulic control • Emergency stop available • CE version • Suitable for professional firewood operation • High work performance • Stable feet • Well-maintained condition • Ready to use • Ideal for forestry and firewood operations Auction-ID: 04C-FSE-2

2-piece - with keys Auction-ID: A1-44654-99

- Total installed power approx. 20 KW. - Dimensions of the work table 5200 x 1200 mm. - Passage height on panel 320 mm. - X-axis travel: 5330 mm, y-axis travel: 1300 mm, z-axis travel: 300 mm. - Maximum travel speed in x-y-z directions: 45-45-25m/min. - Tool magazine with 10 positions. - Electrospindle: motor power 7.50 KW-max. 18000 rpm, automatic tool change, for ISO 30 tool holders. - Horizontal milling unit with 2 outputs to work in front of and behind the workpiece: motor power 5.50 KW-max. 18000 rpm. - Vertical holes in the x-axis direction: 6. - Vertical holes in the y-axis direction: 4. - Horizontal holes in the x-axis direction: 2+ 2. - Horizontal holes in the y-axis direction: 1 + 1. - NUM 1060 numerical control. - Remote control panel. - 25 suction cups. - BECKER VTLF 250 vacuum pump with a capacity of 250 m³/h. - Tools featured in photos are included. - Op ...

FABBRI hot air generator model F120: - for the indicative surface to be heated about 500-600 square meters (or about 3000 cubic meters) - Nominal firebox power 150,000 kcal/h - Thermal power output 120,000 kcal/h - air flow rate 8900 mc/h - Air fan HP 3 - Fume fan HP 0.75 - air hose diameter 3 x D=250mm - chimney diameter D=200mm - overall dimensions about 1.7 x 1 m, h=2 - weight about 615 kg Year 2018, to CE regulations Availability from June 2026

3-piece - with keys Auction-ID: A1-44654-94

3-piece - with keys Auction-ID: A1-44654-98

3-piece - with keys Auction-ID: A1-44654-95

3-piece - with keys Auction-ID: A1-44654-97

metal workbench Dimensions: 1950 x 540 x 950 mm Loading: 6 drawers Drawer dimensions: 395 x 490 x 250 mm capacity per drawer: 40 kg Doors: 2 doors Dimensions doors: 440 x 810 mm Handles: Integrated handles Worktop: 30 mm thick wooden worktop Worktop capacity: 750 kg Frame: Powder-coated frame Fronts: lacquered fronts Including: 4 swivel wheels Weight: 162 kg Condition: Unused Auction-ID: A3-43511-477

ID3765 Pallmann PHPH 16-18 (Grizzly) year/Bauahr 1992 Impact hammer mill, 400 kW electric motor, rotor diameter 1600 mm, rotor length 1800 mm, number of hammers: 52 Impact hammer mill, electric motor 400 KW, rotor diameter 1600 mm, rotor length 1800 mm, number of hammers: 52 pieces

Features: HEY Extraction system type SAU 300 1000x3200x2900 VERBOOM Planer type VE-400 2510x1200x1100 SCM Thickened bench type S52 1800x1000x1100 SCM Table saw type S116F including connecting custom-made workbench 1820x3750x1550 VERBOOM Miter saw type Radial600P3S including custom-made metal guide 1260x4500x1450 SCM milling cutter type T120/C 1050x950x1640 CORAL Extraction 1400x600x2200 CENTAURO Bandsaw type SP60 440x1100x2060 SAMCO Long hole drill type AS16 700x900x1200 Including fully functioning extraction with coupling and various separate pipes and power box Needs to be disassembled by the buyer, lifting equipment available. Auction-ID: A1-41992-145

New and unused in the packaging. 294 pieces Composite Fence Board Teak / Brown 182.5x15.4x2 cm (294x) Model: Teak Auction-ID: A1-40104-165

Equipped with water tank, spare wheel, air hose reel and extra lighting. Tiltable. Auction-ID: A1-42013-5

- Total installed power 2.50 KW. - Portable, with wheels. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-732

- Total installed power 2.50 KW. - Portable, with wheels. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-720

250x pieces of one-way pallet , content 100x disposable pallets 120x80cm & 150x half pallets, new condition Auction-ID: A1-45187-402

4 x steel fabricated wooden topped worktop benches, complete with built-in pedestal and vices, each bench 2000mm x 800mm, ANR 21 Auction-ID: A1-45187-229

CNC - processing center Brand: COMEC Type: MD TOP The ideal CNC solution to process narrow and complicated work pieces EASY with COMEC processing length up to 2.000 mm Head configuration individually customizable for: - saw with 360° - axis - milling unit for horizontal and vertical processing - drilling head with separate jumping spindles vertical and horizontal - multiple spindle drilling heads separate jumping even horizontal - horizontal milling unit with 360° C - axis Special developed clamping table, moves automatically program controlled in X direction Furthermore, optionally available: - Automatic raw work piece feed with finished work piece return to the operator TPA control unit: CNC control with graphical user interface Parametric software with 3D modeling Necessary processing macros customized to you pre-installed