wood chip used for sale

We have 2 complete controllers (built in 2006) with all cards for Cathild drying chambers. Sale is possible in a package or individually.

Weight: 3 t x-travel: 1000 mm : 110 milling-head swivable +/-: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Reichenbacher CNC multi-spindle woodworking center with automatic support table and vacuum pins is available. Traverse path X1/X2: 8540mm, traverse path Y1: 2500mm, traverse path Z1: 480mm, swivel B: 180°, swivel C: 360°, X3 axis: underfloor drilling unit, U2-U10: carrier movement 1-9 (gantry), axis speed X/Y/Z: 60m/60m/20m/min, turning speed B/C: 90°/s, table dimensions X/Y: approx. 8500mm/2600mm, max. workpiece weight: 150kg, max. workpiece dimensions X/Y: 8500mm/2600mm, number of carriers: 9. Workpiece dimensions X/Y: 8500mm/2600mm, number of carriers: 9, suction plates per carrier: 8, suction plate diameter: 100mm, carrier positioning: +/-1000mm, min. carrier distance: 300mm, total vacuum pump number: 72, vacuum pump stroke: 100mm, vacuum pump useful stroke: 25mm, tool positions: 24, max. tool weight: 6kg, max. tool length: 240mm, max. tool diameter: 300mm. Total system dimensio ...

Hundegger K2i 625 well-maintained year of manufacture end of 2008 fully automatic carpentry machine, feed and loading cross conveyor, under-table swivel cross-cut saw 11 kw, universal milling unit - 5 axis, combined support for vertically working tools, drilling rig 2.2 kw, drilling rig swivel 2.2 kw, marking device, fully automatic beam turning station hydraulic design, transport and position setup two-hand system, electronic control, 6-arm storage table, AQF strand with shaft extension, Extension bracket with puller, zero stop for pre-elongated components, scrap wood holder on the K2 i in front of the sawing unit, splinter wood for horizontal drilling unit, vertical finger cutter 5.5 kw, longitudinal and transverse groove cutter, slitting device on both sides guide 900mm, marking device at the rear, marking and labeling device at the bottom, refined wood support surfaces, additional sc ...

We are happy to offer: NEW – CHIPPER for all wood surfaces For the production of chopped wooden surfaces A wide variety of hoeing patterns can be applied Type. HMC 600 Working width max. 600 mm Working height max. 400 mm Subsequently installed in the machine: 2 strong brush rollers at the top 2 conveying systems for wood chips Automatic surface adjustment for slightly curved woods With protective rollers for tongue and groove boards Delivery time approx. 5 to 7 months from the day of receipt of the deposit Sale with 1 year warranty Payment 90% upon order – final payment 6 weeks before delivery date.

Lathe Hempel Semi-automatic stencil lathe Hempel Type: CH 4 Turning length 400 mm max. turning diameter 100 mm Spindle motor 4 kW, 2800 rpm. Hydraulic pump motor 0.85 kW Infinitely adjustable hydraulic feed Automatic workflow – clamping the scantlings, forwarding and rewinding the front support with the turning steels, finishing turning through the forming steels on the rear supports and clamping the finished turned part Weight approx. 725 kg

Vertical Wood Band Saw PROMAC SW-430 Throat depth: 400 mm Table size: Depth 600 mm x Width 430 mm Tilting table from 0 to 40° Blades dimensions: Length 3330 x 15 mm x thickness 0,6 mm Maxi cutting height: 200 mm Steering wheels diameter: Ø 430 mm Voltage: 380 V Motor: 1,5 kW Width: 800 mm Depth: 900 mm Height: 1900 mm Weight: approx 150 KG Year of construction: 2011 (machine in very good condition) Supplied with 2 spare blades

Hacker Weima WL 4 Single Shaft Shredder NEW MACHINE The WL 4 single-shaft shredder is a proven classic for shredding waste and residues of all kinds. For example, it is used thousands of times in woodworking companies worldwide. The high number of these shredders, which are in high demand, ensures proven and reliable technology at the best price-performance ratio. The machines are characterized by their very robust design, which ensures an extremely high durability (even outdoors). Weima Single Shaft Shredder NEW Hopper opening with logspacer 600x1050mm Hopper capacity 0.6m/3 Working width of rotor 600mm Diameter of rotor 252mm Drive power 18.5 kW Rotor speed 80-120 rpm Number of knives 28 pieces Type and size of the knives concave / 40 x 40 mm Screen perforation 10 - 100 mm Paintwork WEIMA Standard RAL 2002 / 7016 Connected load 400 V +/- 5 % / 50 Hz Weight approx. 1, ...

Weibert DB 1050 Pro Vario Lathe Turning diameter 794 mm Tip height 397 mm Center width 1016 mm Speeds: 20- 3850 min-1 Konuse MK 2 Spindle Head Thread M33 2.2 KW 50 HZ 230 V Right - Counterclockwise Length 1700mm Height 1300 Weight 250kg Scope of delivery: Tool support 300 mm Increase in tool support Face Plate 80 mm Four-pronged drivers Grain Punches long ejection rod Short ejection rod 2 x tension wrenches 46mm / 38mm Tension wrench 8mm / 10mm Tension wrench 17mm / 19mm Allen key (2.5mm, 3mm, 4mm, 5mm. 8mm, 10mm)

Rental: Wooden crate for transport EOS M270/M280

minimax si x 32A3 UPx Sliding table saw Trimming length 1200mm Sliding carriage 3200 x 360 mm Format cuts 3200 mm Cutting width with rip fence 1270 mm Max. cutting height +90°: 136 mm Max. cutting height +46°/-46°: 97/60 mm Motor 400V 50Hz 7kW Speed main saw blade: 4000 rpm Suction Nozzle Diameter: 120mm & 80mm Weight: 936kg G&STÜ-5508783

SPECIFICATIONS Distance between tool tips: 900 mm Tool tip height: 155 mm Installed power: 0.37 kW Spindle speed min/max: 500/2000 rpm Voltage: 230V EQUIPMENT: Miscellaneous accessories and tools

2-SHAFT SHREDDER - HEAVY DUTY, The machine is constructed in sturdy carbon steel and is complete with a supporting structure (1.400 mm heigh) and a loading hopper prepared to receive material from a spider or a belt, size 2.500 x 1.500 x 1.200, Shredding chamber mm.1500 x 900, independent shafts 1.500 mm long, shafts are driven by independent electromechanical motors., 2 x 75 kW motors, The maximum installed power is used to absorb load peaks. Normally, absorption will settle at values around 50% of the installed power., Shafts speed 13-15 rpm, N.15 knives 100 mm thick with 4 hooks, Automatic inversion on overload, Automatic lubrication pump, Tolerance : iron rods with a maximum thickness of 4 mm (up to 3%-4% of the total material), Electrical panel with PLC, Cabinet dimensions: L 1800 mm, H 2000 mm, D 500 mm., installed power - used power in work: about 60-65% : 150 kW, availability: ab ...

NEW - year of construction 2020, PTO-drive, 2/4 fold splitting wedge, 4 m conveyor belt, with log lifter, 10 t splitting force, max. cutting diameter 36 cm, adjustable cutting length 20 - 55 cm, 2 splitting speeds, own weight 675 kg, Hp / kw: 18 hp / 14 kW, Year of construction: 2020

Calibrating sanding machine SCM SANDYA 20 mod. 20 M3 135 used Year of manufacture 2003 Nr. AE/024903 series maximum workable width mm. 1350 Forward speed 3.5-18 mt/m with inverter workable height 4-170 mm vacuum hob KW 7.5 Composition: I° group: calibrating roller in grooved steel D. 250 - KW 22 motor II° group : sanding roller d. 250 hardness 45 SH - motor 2 speed KW 9/11 rpm 1400/2800 III° group: combined roller d. 170 hardness 30 SH + 46-sector sectioned elastic buffer - motor KW 11 with inverter I° group : scotch brite satin roller Flat positioner with workpiece tape development mm. 2620 x 1370 II° and III° belt blowers Automatic belt centering Electronic intervention I° roller / II° roller / III° roller / buffer

We offer OSB boards in second choice here. (The plates are only handed in by parcel. Single plates cannot be purchased) Currently available in stock: approx. 10 packages The scope of delivery includes: OSB boards, second choice Item number: OSB10 Overall length: 2,440 mm Total width: 590 mm Thickness: 12 mm Panel size in m²: approx. 1.44 m² Total m² / package: approx. 216 m² Design: tongue and groove Number of pieces in the package: 150 pieces Base price m²: 9,03 € incl. 19% VAT Hint: It is a special item in the second choice, there may be damage to the OSB boards. Your contact persons in our company: Mr. Falk German Mr. Mario Klöver Mr. Andre Evering General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which will be charged separately  ...

We offer OSB boards in second choice here. (The plates are only handed in by parcel. Single plates cannot be purchased) The scope of delivery includes: OSB boards, second choice Overall length: 2,440 mm Total width: 590 mm Thickness: 18 mm Panel size in m²: approx. 1.44 m² Total m² / package: approx. 144 m² Design: tongue and groove Number of pieces in the package: 100 pieces Base price m²: 7,56 € Hints: It is a special item in the second choice, there may be damage to the OSB boards. Your contact persons in our company: Mr. Falk German Mr. Mario Klöver Mr. Andre Evering General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

We offer OSB boards in second choice here. (The plates are only handed in by parcel. Single plates cannot be purchased) The scope of delivery includes: OSB boards, second choice Overall length: 2,500 mm Total width: 625 mm Thickness: 22 mm Panel size in m²: approx. 1.56 m² Total m² / package: approx. 50 m² Design: tongue and groove Number of units in the package: 32 pieces Base price m²: 9,24 € Hint: It is a special item in the second choice, there may be damage to the OSB boards. Your contact persons in our company: Mr. Falk German Mr. Mario Klöver Mr. Andre Evering General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

reus: 8000 min-1 U/min Weight: 5500 kg Year: 2007 Control: Siemens 840D Dimensions (L/W/H): 3600 x 2800 x 2400 mm travel -x axis: 1035 mm travel -y axis: 560 mm travel -z axis: 510 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Distance between centres: 1200 mm Speed: A) 70 - 380 U/min. turning speeds: B) 380 - 2000 U/min weight: 2,2 t Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2150x480x1330 mm Weight: 230 kg Total power requirement: 1,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1230x490x2120 mm Weight: 200 kg Total power requirement: 1,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1600x330x420 mm Weight: 130 kg Total power requirement: 1,1 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2150x480x1330 mm Weight: 230 kg Total power requirement: 1,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2150x480x1330 mm Weight: 220 kg Total power requirement: 1,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2150x480x1330 mm Weight: 220 kg Total power requirement: 1,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 600 x 800 mm Motor output: 15 kW 0: 0,6 m³ Diameter of the motor: 260 mm Dimensions (L/W/H): 1.805 x 1.118 x 1.646 mm Weight: ca. 1.100 kg Hoku single-shaft shredder H 600 Compact, robust, high throughput ------------------------------------ Technical manufacturer description: The H600 high-performance shredder with its flexible application options can shred all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer scraps, etc.) and achieves a high and, in the case of bulky materials, achieves an enormous reduction in the volume reduction of the material. The hydraulically controlled pusher feeds the wood waste to be shredded to the cutting area of the rotor and is controlled automatically and automatically and load-dependent. The high-performance electric rotor made of has a diameter of 252 mm and operates with a rotor speed of rotor speed of 8 ...

Manufacturer: Trockenkammer Lauber /Mühlböck Model: OLSF-2x1,20-3x1,20-13,00 Year of Manufacture: 2004 Type of Machine : Wood Drying System TECHNICAL DATA PER UNIT HOT WATER HEATING - Heating capacity: 283,800 kcal/h = 330 kW - Flow temperature: 95 °C - Water volume: 11 m³/h - Pressure loss: 3 mWS = 0.3 bar - Connections (supply/return): DN 50 / DN 50, PN10 SPRAY SYSTEM - Water consumption: 68 l/h - Temperature: T = +4 °C - Pressure: p = 3.0 bar - Connection: R 1/2" - Spray nozzles: 5 pcs FANS - Quantity: 10 pcs - Power per fan: 1.1 kW - Voltage: 400 V STACKING DIMENSIONS - Length (L): 2 × 6.0 m + 1.00 m - Width (W): 2 × 1.2 m + 1 × 0.2 m - Height (H): 3 × 1.2 m + 3 × 0.1 m GROSS STACKING VOLUME - 103.7 m³ TECHNICAL DATA PER CHAMBER HOT WATER HEATING - Heating capacity: 410 kW - Flow temperature: 95.0 °C - Water flow rate: 24 m³/h - Pressure loss: 3.0 mWS =  ...

TECHNICAL DATA: Power consumption: 1 kW Working temperature: 470 °C Ideal for use on wood

TECHNICAL DATA: Power consumption: 2.5 kW Working temperature: 470 °C Operating pressure: 5 bar Ideal for use on wood

x-travel: 1200 mm weight: 2 t : ja milling-head swivable +/-: ja : ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Häwa milling head debarking system is made of: Trunk diameter 0.30 to 1.30, Trunk length 22.0 - 6.50 m Drive motor 55 kW Log feeding station Log wagons Milling head Round timber sorting system li/right after milling Residual wood scraper with discharge Electrical control cabinet, control panel

Band saw Hammer 4400, very good condition, 1.5 kW, approx. 110 kgPrices subject to change, errors, printing and typesetting errors excepted

Band saw Felder FB510, year 2019, very good condition, standard equipmentPrices subject to change, errors, printing and typesetting errors excepted

Band saw Metabo BS260 Swift, year 2006, very good condition, 260 watts, 230 V, 1712 mm belt length, 40 kgPrices subject to change, errors, printing and typesetting errors excepted

The new professional turning lathe by Holzprofi Maker stands out due to its precise workmanship, stepless speed and left/right-turning. Cast iron drive unit and bed. Motor is splashprooved for wet wood turning. The tailstock has quick adjustment, the headstock has a hollow spindle with Mk 2 mount also in the tailstock. 36 pitch with latching. Standard equipment: quick adjustable tailstock rest grab chuck face plate live center Technical data: Distance between centers 1000 mm Center height 254 mm Tail stock thread M33 Din 800 Motor power 2,25 kW, S1 Speeds variable 100-1350 100-3550 rpm Voltage 230 V Weight 240 kg Optional: Outturning extension (increases the center height by approx. 220 mm or lengthens the center distance by approx. 460 mm)

The new small professional turning lathe by Holzprofi Maker stands out due to its precise workmanship, stepless speed and left/right-turning. Cast iron drive unit and bed. Motor is splashprooved for wet wood turning. Standard equipment: quick adjustable tailstock rest grab chuck face plate live center Technical data: Distance between centers 640 mm Dist between centers with opt. extension 1120 mm Center height 204 mm Tail stock thread M33 Din 800 Motor power 2,2 kW, S6 Speeds variable 100-1200 100-3200 rpm Voltage 230 V Weight 135 kg

Orbital sander CAMAM mod. LEC200/AV - With feeding units - Min/max diam. 10/100mm - Motor 5.5hp - Volt. 380v/50hz

Exhibition machineThe Holzprofi dehumidifier HT-100 is ideal for drying wood, but the dehumidifier can also be used for drying basements, construction sites, etc. Advantages and features:- High drying performance even at low temperatures, thanks to hot gas defrosting- Good dehumidification even at low humidity- High efficiency for energy-saving operation- High-quality machine from the industrial sector, durable and suitable for many applications.- The practical control system switches the

Copyng lathe with 4 spindles BACCI mod. T4MO - Max turning diameter 170 mm - Max working length 1000 mm - Longitudinal sanding unit - Nr. 4 spindle - Year 1994

This 3-axis VITAP K3 CNC Wood Machining Centre was manufactured in 2023. Consider the opportunity to buy this VITAP K3 CNC Wood Machining Centre. Contact us for more information.

This MACO VK370 AR ALU Circular Wood Saw was manufactured in 2013. It features a head motor of 5.5 kW, a trim roller motor of 0.75 kW, and a lubrication pump of 0.1 kW. The blade speed ranges from 20–120 rev/min with a maximum blade diameter of 370 mm. It operates at a working air pressure of 5–7 bar. Consider the opportunity to buy this MACO VK370 AR ALU Circular Wood Saw. Contact us for more information.

This 3-axis COMEC MD JAM CNC Wood Machining Centre was manufactured in 2024. Consider the opportunity to buy this COMEC MD JAM CNC Wood Machining Centre. Contact us for more information.

This 3-axis SCM Record 125 N CNC Wood Machining Centre was manufactured in 2007. It features a robust 7.5 kW electrospindle reaching up to 18,000 rpm, and an automatic tool changer with 8 positions. The working area extends to 3400 x 1720 x 400 mm, supported by a vacuum pump of 90 m³/h. If you are looking to get high-quality milling capabilities, consider the SCM Record 125 N machine we have for sale. Contact us for more information.

This IMA BIMA 300 was manufactured in 2008. A CNC Wood Machining Centre ideal for diverse woodworking applications. Contact us for more information.

This 5-axis INTOREX TKC-1500 CNC Wood Machining Centre was manufactured in 2025. It features a high-performance electrospindle with a 7.5 kW motor, achieving speeds up to 22,000 rpm. The machine includes a rotary tool magazine with 8 slots and an automatic feed unit for workpieces up to 1500 mm in length. Fully enclosed safety guards ensure compliance with EU standards. If you are looking to get high-quality woodworking capabilities, consider the INTOREX TKC-1500 machine we have for sale. Contact us for more information.

This 3-axis Weeke CE OPTIMAT BHC VENTURE 3 was manufactured in 2002. It features a powerful 17 kW main motor and a maximum spindle speed of 24,000 rpm. The working field measures 3250 × 1250 × 1215 mm, with a rapid traverse speed of 100/50/20 m/min. Ideal for diverse CNC woodworking tasks, it also requires 7 bar of compressed air and has a dust extraction capacity of 3170 m³/h. Contact us for more information about this machine.

This IMA BIMA P480V 180/480 was manufactured in 2001. A CNC Wood Machining Centre ideal for diverse woodworking applications. Contact us for more information.

This 3-axis COMEC MD TOP XL CNC Wood Machining Centre was manufactured in 2020. It features a robust mono-block structure, high-speed axes positioning up to 70 m/min, and versatile electro-spindles for drilling, milling, and cutting. The machine includes a CAD-CAM control unit with a 17 touchscreen and full safety enclosures. If you are looking to get high-quality woodworking capabilities, consider the COMEC MD TOP XL machine we have for sale. Contact us for more information.