128,234 used machines on RESALE, but how to find them? Machine Search
spindle diameter: 102 mm x-travel: 1600 mm y-travel: 1000 mm z-travel: 1600 mm Control: Heidenhain type: TNC 410 table surface area: 1000x1120 mm Table load: 3000 kg spindle stroke: 710 mm spindle turning speed range: 4-1600 U/min main drive motor: 13 kW total power requirement: kW weight of the machine ca.: 12 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 150 mm x-travel: 16000 mm y-travel: 3000 mm taper ISO: 50 w-axis: 1200 mm total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 102 mm x-travel: 1600 mm y-travel: 1210 mm z-axis: 1475 mm spindle travel: 710 mm B-axis (table): 360 ° Table dimensions: 1250x1400 mm Table load: 3500 kg T-slots: 22H7 T-slot - distance: 125 mm spindle turning speed range: 4-1600 U/min spindle drive: 16,5 kW Control: total power requirement: 47 kW weight of the machine ca.: 9,25 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 100 mm travel -x axis: 2000 mm travel -y axis: 1200 mm travel -z axis: 1000 mm spindle stroke - max.: 500 mm table surface area: 1250 x 1250 mm table rotating: 360 ° max. table load: 8000 kg spindle taper ISO: 50 spindle turning speed range: 30 - 1300 U/min feeds: 2 - 1000 mm/min rapid traverse: 6 m/min drive capacity - spindle motor: 14 kW coolant: voltage: 380 V control: Bosch1-OSA One direction thrust bearing: total power requirement: 15,0 kW weight of the machine ca.: t dimensions of the machine ca.: 4,20 x 3,00 x 3,00 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 125 mm x-travel: 2500 mm y-travel: 1900 mm w-axis: 1100 mm radial face slide travel: mm table adjustable: 1000 mm digital readout: Pfillips workpiece: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 125 mm x-travel: 2500 mm y-travel: 2100 mm spindle taper ISO: 50 spindle turning speed range: 5-1000 U/min spindle travel: 900 mm Radial face slide: 650 mm radial face slide travel: 250 mm angular milling head: rotary table:: table surface area: 2000x2500 mm table height: 800 mm table travel: 1700 mm total power requirement: kW weight of the machine ca.: 25 t dimensions of the machine ca.: m Table, Floorplate, tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 80 mm x-travel: 1200 mm y-travel: 1000 mm z-travel: 815 mm Spindle travel: 450 mm spindle taper ISO: 40 Radial face slide diameter: 498 mm table surface area: 1000x800 mm digital readout: coolant: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
diameter: . mm tool adaptor: . length: . mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m Post boring bars and turning toolsThe techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 100 mm x-travel: 2000 mm y-travel: 1200 mm z-travel: 1000 mm w-axis: 500 mm control: Heidenhain type: TNC 155 turning speeds: 20-2000 U/min spindle taper ISO: 50 table surface area: 1100x1300 mm angular milling head: Feed: 0-5000 mm/min Rapid movement: 8000 mm/min workpiece weight: 3000 kg spindle motor: 15 kW total power requirement: 27 kW weight of the machine ca.: 14 t dimensions of the machine ca.: 5,3x2,9x3,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Precision face and boring chuck WMW A 100 - 4 ( A100-4 ) TGL 32680 ( TGL32680 ) Dimensions: 210 x 100 x 85 mm
Boring tool, optional accessories WMW TGL 30-1201 ( TGL30-1201 ) Dimensions: 185 x 120 x 55 mm
Boring tool, optional accessories WMW TGL 32680 ( TGL32680 ) shank: Ø 20 mm Adapter: Ø 8, 10, 12 mm Dimensions: 185 x 120 x 55 mm
Boring tool, plan and boring head PAGUS MK4 Diameter boring rod holder: 25 mm in wooden box used, tested ! Dimensions: 390 x 210 x 230 mm
Face and boring head NAREX Vhu 80 ( Vhu80 ) holder: SK50 in wooden case used, tested ! Dimensions: 420 x 410 x 155 mm
Boring tool, special accessory WMW TGL 32680 ( TGL32680 ) TGL 30-1201 shank: Ø 20 mm adapter: Ø 8, 10, 12 mm in wooden box used, tested ! Dimensions: 185 x 120 x 60 mm
: : tool taper: SK50 0 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
D'Andrea TA120 Plan Boring Head SK40 S20x2 Cover Fp1 Fp2 Boring Tool Total weight 16.6 kg Lots of accessories, see pictures. Very good used condition. In original wooden crate
spindle diameter: 102 mm x-travel: 1600 mm y-travel: 1250 mm z-travel: 1600 mm spindle taper ISO: 50 bore spindle stroke: 710 mm main drive motor: 11 kW turning speeds: 1600 U/min Feed: 4000 mm/min Control: Heidenhain type: TNC 135 T-slot - width: 22 mm T-slot - distance: 140 mm table surface area: 1250x1400 mm Table load: 2500 kg total power requirement: 23 kW weight of the machine ca.: 9,3 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 130 mm x-travel: 2750 mm y-travel: 2000 mm z-travel: 2330 mm spindle taper ISO: 50 bore spindle stroke: 1000 mm turning speeds: 900 U/min Feed: 2500 mm/min Control: Heidenhain type: TNC 131 T-slot - width: 28 mm table surface area: mm Table load: 8000 kg total power requirement: kW weight of the machine ca.: 37,8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
SKODA WD160B floor type boring mill X Axis 3150 mm Y Axis 2500 mm Z Axis 1600 mm Table 2000x2000 mm Piece weight 20000 kg Spindle diameter 160 mm Max. spindle speed 800 rpm Spindle motor power 75 kW Length x width x height 10000.0 × 5250.0 × 6365.0 Weight 50000 kg New control.
1 x CNC bench boring machine in cross-bed design Manufacturer: TOS Type WH13 CNC Year of manufacture 1997 Control: TNC 426 Heidenhain 5-axis X-3500 mm Y-2000 mm Z-1250 mm B-800 mm B-360 Degree Table clamping surface: 1600 x 1800 mm Table load: 12 t Spindle diameter: 130 mm Spindle mount: ISO 50 Spindle speed: max. 1500 rpm Condition: Very good. The machine was only used for repair purposes; no contract manufacturing. Spindle hours: 22,054 Program runtime: 15.661
TOS ,W 100 , YEAR 1976, SPINDEL MORSEA
Year of manufacture: 1992 / G: 2025 Spindle diameter ... 100mm Axis X ... 1500mm Axis Y ... 1250mm Spindle speed ... 7-1120 rpm Axis W Axis Z ... 1800mm ISO 50 Turntable diameter ... 1200x1200mm The machine is in good condition, possible to test under power.
CONTROLS CNC controls SIEMENS 840 D WORKING RANGE -CUBIC- number of processing axes (excl parallel axes): 5 X-axis travel: 800 mm Y-axis travel: 600 mm Z-axis travel: 800 mm W-axis travel: 1250 mm rotating range B-axis from: 0 ° rotating range B-axis up to: 360 ° WORKING RANGE -BORING- drilling depth (max): 800 mm drilling capacity full bore (steel): 25 mm SPINDLE / HEAD tool fixture: HSK A50 drive power: 15 kW AXIS DRIVES feed velocity (max): 15000 mm/min TOOL MAGAZINE number of positions: 20 ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 5600 mm space requirements -front/back-: 4910 mm total height: 2700 mm total weight approx.: 10800 kg 20 toolstations with rotating table 800x600 approx 46300h Including chip conveyor and vari ...
Key data: 4 , 14 mm
Multiple drill head from Romai, Sigloch & Schrieder up to diameter 14 mm in steel 4 stations, automatic and manual switching 2 speed ratios choiceable (direct and reduced) incl. adapter MK 4 and flange
x-travel: 1600 mm : ja weight of the machine ca.: 13,7 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Make: Tos Machine No: F641 Type SPEEDtec CNC brand Siemens CNC type Sinumerik 840D Year of construction 2009 X 1,250 mm Y 1,000 mm Z 600 mm Mounting HSK 100 Motor power 25 kW Speed 12000 RPM Tool Changer Number of pallets 4 Outgoing Aries Including manuals Maximum speed 12,000 RPM Maximum pallet load 4,000 kg Chip transport Magazine slots: 2x 40 , HSK 100 4 tables, 1x 1,000 x 1,250mm / 3x 1,000 x 1,000mm
diameter: 190 mm weight: 120 kg Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 110 mm x-travel: 900 mm y-travel: 600 mm z-axis: 200 mm table length: 1020 mm table width: 860 mm taper MK: 40 Table size, approx. 1,020 x 860 mm Max. weight of workpiece 800 kg Table travel, longitudinal, max. (X) 900 mm Boring head travel, cross, max. (Y) 600 mm Boring spindle stroke (Z) 200 mm Vertical travel of cross beam (W) 635 mm Vertical distance between table and boring spindle 15 - 850 mm Distance between columns 950 mm Spindle Ø 110 mm Spindle taper internal/external ISO 40 18 spindle speeds 10 - 2,500 rpm Milling feeds of table, infinitely variable 1 - 6,000 mm/min 4 milling feeds of boring head 30 - 180 mm/min 6 boring feeds 0.01 - 0.39 rpm Accuracy of all 3 axes when the machine was new 0.003 mm Quick feeds for table, boring head slide, and boring spindle, max. 6,000 mm/min Spindle drive 6.2 kW Weight, approx. 9,000 kg Total electrical load ...
cycle time: 0 sec total power requirement: 2,5 kW weight of the machine ca.: 1 t dimensions of the machine ca.: m P O S A L U X (Switzerland) Horizontal 3-Spindle Fine Boring Machines Model MICROFOR PNC 3 Year 1984 Serial Nos. 6.8230/9 Boring Æ 0.15 - 2 mm Spindle stroke 0 - 18 mm Working stroke, max. 0 - 12 mm Quick feed 60 mm/sec Boring feed 0 - 5 mm/sec Spindle speeds 3,500 - 11,500 rpm Distance between spindles, vertical, approx. 80 mm Table speeds (for deburring) approx. 100 rpm Table Æ, approx. 100 mm Table bore, approx. 70 mm Table slide swivelling device, approx. 60 °/sec Swivelling range 0 - 100 ° Total drive, approx. 2.5 kW Weight 1,000 kg Accessories / Special Features Serial No. 6.8230/9 Machine is equipped with a modern POSALUX SELECTRON Control with keyboard and LED for direct programming on the machine (in principle the same as with a punchboard control). With s ...
cycle time: 0 sec total power requirement: 2,5 kW weight of the machine ca.: 1 t dimensions of the machine ca.: m : : : : : : : Horizontal 3-Spindle Fine Boring Machines Boring Æ 0.15 - 2 mm Spindle stroke 0 - 18 mm Working stroke, max. 0 - 12 mm Quick feed 60 mm/sec Boring feed 0 - 5 mm/sec Spindle speeds 3,500 - 11,500 rpm Distance between spindles, vertical, approx. 80 mm Table speeds (for deburring) approx. 100 rpm Table Æ, approx. 100 mm Table bore, approx. 70 mm Table slide swivelling device, approx. 60 °/sec Swivelling range 0 - 100 ° Total drive, approx. 2.5 kW Weight 1,000 kg Accessories / Special Features Serial No. 6.8230/9 Machine is equipped with a modern POSALUX SELECTRON Control with keyboard and LED for direct programming on the machine (in principle the same as with a punchboard control). With setting microscope and machine lamp. The data for this ad was ...
spindle diameter: 130 mm x-travel: 3000 mm y-travel: 2000 mm total power requirement: 4,5 kW weight of the machine ca.: 30 t Spindle Ø 130 mm Spindle taper SK 50 Working range: X = column, longitudinal 3,000 mm Y = headstock, vertical 2,000 mm Z = spindle stroke 1,000 mm Lower table 3,300 x 2.400 mm Max. weight on table 10 tons/m² Min./ max position of work spindle above table 770 / 2,770 mm Feeds 0.9 - 2,000 mm/min Quick feed for headstock and column 5,000 mm/min Quill feed 0.5 - 1,200 mm/min Speed range, partially infinitely variable 4.5 - 1,250 rpm Weight, approx. 30,000 kg Accessories / Special Features HEIDENHAIN Digital Display for 3 axes. Hardened guideways. Ball screw spindles. Infinitely variable spindle speeds and feeds. Feeds can be individually driven with motor. Moving operating platform. Hanging control panel. Manual operati ...
spindle diameter: 0 mm x-travel: 700 mm y-travel: 600 mm table length: 800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Double Column Design Jig Borer Tablesize: 800 x 600mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 105 mm x-travel: 1250 mm y-travel: 1000 mm z-travel: 600 mm table length: 1100 mm table width: 900 mm tool adaptor: 50 ISO / MK total power requirement: kW weight of the machine ca.: t CNC Table Borer, Reconditioned 2002, BOSCH CC 300 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
workpiece diameter: 125 mm grinding depth: 50 mm clamping length: 2000 mm total power requirement: 0,5 kW weight of the machine ca.: 1000 kg dimensions of the machine ca.: m T E C H N I C A (Switzerland) Centre Hole Grinding Machine Model ZSM 5100 – 2.000 Year approx.. 1975 S/N 66 32 7872 – J 3278 _______________________________________________________ Distance between centres 50 – 2.000 mm Height of centres approx. 125 mm Workpiece Ø in clamping Vice 8 – 125 mm Swing of workpiece over tailstockguide 290 mm Swing of Workpiece max. over grinding head pillar 300 mm Max.weight of workpiece 250 kg Max. centre hole taper Ø 2 – 50 mm Max. centre hole taper angle 60 ° Clamping range of vice approx. 5 – 160 mm Grinding head ...
table length: 2000 mm table width: 1800 mm table load: 12,5 t total power requirement: 10 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: m Table size approx. 2,000 x 1,800 mm Max. weight of workpiece, approx. 12,500 kg Table travel, longitudinal 1,250 mm Table height above floor 920 mm Longitudinal feed 0.63 - 2,000 mm/min Turning feed, with Ø 1,000 mm 1 - 3,150 mm/min Longitudinal quick feed 2,000 mm/min Turning quick feed, with Ø 1,000 mm 3,150 mm/min Weight of machine 7,500 kg External dimensions of machine 3,700 x 2,100 x 920 mm Total electrical load 10 KW - 180 V - 50 Hz Accessories / Special Features Telescopic covers for the guides. Infinitely variable table feed. Optical display for setting and reading the longitudinal adjustment. Optical display for setting and reading the angle. Condition : Satisfactory to good. Machine can be inspected under power ...
x-travel: 520 mm y-travel: 400 mm z-travel: 450 mm spindle taper ISO: 40 control: TNC 360 coolant tank: l total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 2450x2300x3300 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: SK50 - 130 mm x-travel: 800 mm y-travel: 710 mm z-travel: 1000 mm table surface area: 750x750 mm digital readout: Fagor spindle stroke: 450 mm turning speeds: 15-895 U/min Radial face slide: 500 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 130 mm x-travel: 3500 mm y-travel: 2050 mm z-travel: 1050 mm spindle taper ISO: 50 turning speeds: 4-1120 U/min Feed: 5-2000 mm/min bore spindle stroke: 850 mm main drive motor: 45 kW table surface area: 1600x2000 mm Control: Heidenhain type: TNC 426 workpiece weight: 12500 kg : 720 mm radial face slide travel: 240 mm : total power requirement: 90 kW weight of the machine ca.: 31,1 t dimensions of the machine ca.: 6,5x5x5x4 m Turntable with digital display The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, pleas ...
spindle diameter: 125 mm x-travel: 2360 mm y-travel: 1570 mm z-travel: 780 mm w-axis: 410 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 100 mm x-travel: 1250 mm y-travel: 1100 mm z-travel: 950 mm Table load: 3000 kg table surface area: 1000x1120 mm turning speeds: 16-1250 U/min spindle taper ISO: 50 Control: Heidenhain total power requirement: kW weight of the machine ca.: 13,4 t dimensions of the machine ca.: m No. 2022 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad w ...
spindle diameter: 130 mm x-travel: 2000 mm y-travel: 1600 mm z-travel: 1000 mm spindle taper ISO: 50 turning speeds: 4-1120 U/min Feed: 5-2000 mm/min bore spindle stroke: 850 mm main drive motor: 45 kW table surface area: 1250x1600 mm Control: Heidenhain type: TNC 426 workpiece weight: 12500 kg : 720 radial face slide travel: 240 mm total power requirement: 90 kW weight of the machine ca.: 26,3 t dimensions of the machine ca.: 6,5x5x5x4 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further of ...
throat: - mm tool adaptor: siehe Fotos power requirement: 0 kW internal diameter: ca. 240 mm max. pitch circle: ca. 200 mm total power requirement: 0 kW Shipping weight: 230 kg Packing: ca. 800 x 500 x 400 mm Multi-spindle drill head Drilling bell incl. a total of 34 drilling plates The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 25 mm x-travel: 500 mm y-travel: 260 mm cross-moving table: 880x320mm spindle turning speed - stepless: 100-9000 U/min control: HEIDENHAIN TNC310 vertical movement: 480 mm quill stroke: 160 mm weight of the machine ca.: 2.2 t Misc accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 400 mm slide adjustment: 62 mm tool adaptor: MK 4 tool taper: Ø 18 mm weight: 8,0 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
T-Type Boring Machine SAN ROCCO - FMC 110 CNC - Spindle Ø 110 mm, capacity 2100x1600x1600+600 mm - CNC HEIDENHAIN TNC 426, , Information about technical data are not binding., Machine available subject to prior sale., Rotary table dimension: 1300x1100 mm, Maximum table load: 3.000 Kg, Cross travel x axis: 2100 mm, Vertical travel y axis: 1600 mm, Longitudinal travel z axis: 1600 mm, Longitudinal spindle travel w axis: 550 mm, Working feed x-y-w axes: 2 - 10.000 mm/1, Rapid feed x-y-w axes: 10.000 mm/1, Spindle taper: 50-DIN2080 ISO, Spindle speed: 5 - 3000 rpm, Number of spindle speeds: 2, Spindle motor power: 25 Kw, Cnc: HEIDENHAIN TNC 426 CA, Weight: 17.000 Kg, Accessories: Coolant thrugh spindle, external perimeter guard, CE Mark
Radial drilling machine WEBO type R4bRFabr. No. 15 / E195 Year of construction approx. 1965Drilling capacity 40 mmThroat: approx. 1250 mmSpindle holder: MK 4Spindle speed: 30 - 1325 rpm. 9 stepsFeed from 0.12 - 2 mm/rev. 9 steps; used
maximum number of results exceeded
please refine your search
