wood boring machines used for sale

Cutting range: M3-M10 in Steel M3-M16 in cast iron M3-M18 in light metal and brass Spindle speeds: 120-240-180-360-300-600 rpm incl. 1 piece of new tap chuck Everything works smoothly and well

process, chiller, chiller, air-cooled, Type: TAEevo Tech 502 P3- 105 kW Refrigeration Machines, MTA S.p.A. TAEevo Tech 502P3 are air-cooled compact water chillers suitable for outdoor installation (-5°C to +46°C). Cold water temperatures adjustable from -10°C to +30°C. Including crank pan heating, phase monitoring, buffer tank 500 ltr. and built-in P3 circulation pump. chiller, chiller; Radiator Cooling capacity kW 105 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 17.9 Available pump pressure (bar) 3.42 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 55.09 Max. current (A) 93.06 Starting Current Circuit (A) 191.65 Protection class: IP54 Dimensions: Length (mm) 3298, Width (mm) 1255, Height (mm) 2119, Weight (kg) 1748 Connection Rp 2 1/2" Serial No ...

Key data: 350 mm, 700 mm

DMG Mori NLX2500SY/700 Manufactured on 2013 and put into operation on 2014. ZAchse: 700mm, Y-axis 100mm, turning diameter approx. 350mm. Spindle passage 70mm. Operation hours 5353 hours only as new C Axis Y axis B axis 3 Powered Wkz Collets feeder extra included Measuring arm Fully equipped See pictures Immediately available

CNC lathe DMG MORI NLX 2000 SY/500 With DMG MORI M730 UM MAPPS CELOS CONTROLLER Year of Make: 2016 Max. workpiece diameter: 366 mm Max. workpiece length: 510 mm Travel in X: 260 mm Travel in Z: 590 mm Travel in Y: +- 50 mm Spindle bore: 65 mm Main spindle speed range: 4000 rpm Speed range sub-spindle: 6000 rpm Speed range of driven tools : 10000 rpm With the following accessories: Workroom door with interior lighting 20-fold turret with 20 driven stations C Axis , Y Axis Touch Probe ( Marposs ) Sub-spindle, parts catcher Tool presetter manual ( HS ) Collet Chuck Hydraulic with Foot Pedal (HS) Collet Chuck Hydraulic with Foot Pedal (GS) Bar Feeder LNS Move S2 30 tool holders Various powered tools Direct displacement measuring system X, Y, Z axis Signal lamp 4 colours Chip conveyor Coolant Setup Operating Instructions

Grindable diameter from 2 - 40 mm. Smallest and largest point angle: 40 – 180 °. For right- and left-hand cutting tools, 1-12 cutting edges. For sharpening twist drills, step drills, taps. Accessories and an instruction manual are provided.

CNC Swiss Automatic Lathe TRAUB TNL 32 9P With control TX 8 i - p Year of Make: 2016 Spindle bore: 32 mm MAIN SPINDLE Speed range: Max. 6400 rpm C Axis SUB-SPINDLE Speed range: Max. 6000 rpm C Axis TOOL TURRET TOP: Speed range: Max. 12000 rpm 10 speed turret ( All driven ) TOOL TURRET ABOVE: Speed range: Max. 12000 rpm 9 speed turret ( All driven ) REAR UNIT Number of stations: 8 Of which powered: 3 ( T 12 , 13 and 14 ) Speed T12 + T 14 ( 12000 rpm ) Speed T 13 : ( 4000 rpm ) With the following accessories: Full protection cab with interior lighting Various powered tools Various tool holders IEMCA Boss 338 Bar Feeder - HD KSS Pump 20 bar Chip conveyor Operating Instructions

HECKERT ZFWVG 250 x 1250 Thread Milling and Spline Hobbing Machine Max. workpiece diameter 250 mm Workpiece diameter over bed 500 mm Center height over bed 260 mm Threading/hobbing length 1250 mm Min/Max. module 2/18 Workpiece spindle bore 102 mm Bore of the collets 100 mm Tailstock quill stroke 100 mm Speed 45 – 560 rpm Lead of leadscrew 1,2 '' links / left mm Workpiece turning speeds 0,0032-2,65 U/min Rolling feed 0,027-5,66 mm/WU Longitudinal hob feeds 0,3-198 mm/min Main drive 4 kW Feed motor 25 NM Coolant pump 0,09 kW Lubrication pump 0,37 kW Total power requirement 9,5 kW Weight of the machine ca. 3,40 t Accessories; -heavy duty head -standard head -steady rest -change gears set -centers and arbors -spindle spare -counter weight Will be re-paint in original brown colour.

B&A REF: 9269 TON: 60 SCREW DIAMETER: 25MM SHOT WEIGHT: 45 STROKE VOLUME: 49CM3 INJECTION PRESSURE: 2240AR PLATEN SIZES: 446 X 446MM DBTB: 320 X 320MM MIN MOULD HEIGHT: 200MM MOULD OPENING STROKE: 350MM MAX DAYLIGHT: 550MM EJECTOR STROKE: 125MM AIR VALVES: 1 MOTOR: 11 HEATING CAPACITY: 4.9KW SCREW DRIVE: HYDRAULIC

CNC Universal – Milling & Drilling Machine DECKEL MAHO DMU 40 eVo linear With Siemens 840 D sl Operate path control Year of Make: 2016 Travel: X 400 Y 400 Z 375 Speed range: 20 – 20,000 rpm infinitely variable With the following accessories: NC swivel rotary table 450 mm x 400 mm incl. table cooling 60-fold tool changer with double gripper ( HSK 63 ) 3 D Probe Heidenhain Electronic handwheel IKZ 40 bar with paper belt filter Scraper Chip Conveyor Bed Wash Active cooler for control cabinet Spindle Cooling: Water Circulation Cooling Rotoclear Direct displacement measuring system Blowing air d.d. spindle center 3-Piece Height Adjustable Machine Shoes Operating Instructions

GERNEP Labetta labeling system. Built in 2013 with 11 bottle positions, 3 self-adhesive label dispensers and 2 wet glue label dispensers. Output 6K bottles per hour. Servo plate (also for cans). Self-adhesive formats available: 200ml/ 330ml/500ml/750ml. Wet glue format available: 200 ml other formats can be retrofitted. Incl. treadmill and turntable. For more details, please contact us.

B&A REF: 9271 TON:800 SCREW DIAMETER: 110MM SHOT WEIGHT: 4720 STROKE VOLUME: 5160CM3 INJECTION PRESSURE: 1620AR PLATEN SIZES: 1550 X 1400MM DBTB: 1100 X 950MM MIN MOULD HEIGHT: 400MM MAX MOULD HEIGHT: 1100MM MOULD OPENING STROKE: 1080MM MAX DAYLIGHT: 2180MM EJECTOR STROKE: 350MM CONTROLS: TACTUS CORE PULLING: 3 AIR VALVES: 4 MOTOR: 37 + 37 HEATING CAPACITY:37 KW ROBOT : STYRAM S10-L SERVO SCREW DRIVE: ELECTRIC

Suitable for the automatic processing of PCD-tipped milling cutters, shank tools, disc-shaped tools such as saws, milling cutters etc. using the wire-electro-erosion process., Accessories:, Total enclosure,, Adaptation to A-axis on HSK63-A,E incl. test mandrel Ø 25 mm System HSK63 A,E, Integrated loading system and workpiece magazine for automated processing of up to 12 workpieces., Probe,, Automatic central lubrication,, Coolant system for dielectric fluid,, Automatic fire extinguishing system,, Mist extractor,, Machine lamp., Cutter outside diameter: Max. 320 mm, Shank tool diameter: 10-320 mm, Outside diameter disc-shaped tools: Max. 320 mm, Cutting length: max. 480 mm, Tool weight: max. 20 kg, X axis travel: 500 mm, Y-axis travel: 300 mm, W-axis travel: 200 mm, A-axis rotation range: 360 °, E-axis swivel range: 180 °, Required space for the machine: 2535 x 2200 x 2280 mm, Weight a ...

Manufacturer: SEAL Model: 80 Pro D Technical Specifications - Maximum processing width: 2,030 mm - Maximum speed: 6 m/min - Maximum material thickness: 38 mm - Maximum roller pressure: 2.5 N/mm - Maximum roller temperature: 140 degrees C - Roller heating: both sides (top and bottom) Machine Dimensions - Width: 2,667 mm - Height: 1,654 mm - Depth: 634 mm - Net weight: 780 kg Transport Dimensions - Width: 2,710 mm - Height: 1,690 mm - Depth: 900 mm - Transport weight: 840 kg Electrical Data - Power supply: 3N/PE 230 VAC +/- 10%, 50/60 Hz, 25A Key Features - Variable temperature, speed and pressure settings - Ergonomic touchscreen control panel on swivel arm (operable from front and rear) - Feed table with tension rollers and fold-down print guide for smooth and even media feed - Longitudinal cutting device for trimming finished products during processing - Foldable pull rollers  ...

FCS SD-600 M injection moulding machine was built in 2009 in Taiwan by FU CHUN SHIN MACHINERY MANUFACTURE CO., LTD. The machine, distinguished by its high efficiency and reliability, is an excellent choice for the economic production of plastic parts. These parts are produced using the reliable injection moulding method, which involves feeding plasticised plastic into a mould and then clamping it with high press force. A precision mould clamping system operating at a maximum force of 600 tonnes guarantees the high repeatability and quality of the parts produced. In order to fully automate the entire process, a robot works together with the machine. It collects the finished moulded parts from the workspace onto a conveyor belt at the end of the process. The FCS SD 600 M injection moulding machine weighs 24 tonnes. Technical specifications of the FCS SD-600 M injection moulding machine  ...

FCS SD-600MSV injection moulding machine was built in 2015 in Taiwan by FU CHUN SHIN MACHINERY MANUFACTURE CO., LTD. The machine is designed for the economic production of plastic parts of various shapes, sizes and colours. These parts are produced by a reliable injection moulding method. It involves feeding plasticised plastic into a mould and then clamping it with high press force. A precision mould clamping system operating at a maximum force of 600 tonnes guarantees high repeatability and quality of the parts produced. The offer also includes equipment, consisting of, among others, an APEX robot and a conveyor belt. The FCS SD 600 MSV injection moulding machine weighs 40 tonnes. Technical specifications of the FCS SD-600MSV injection moulding machine - control system: FCS-3000 - maximum clamping force: 600 t - mould clamping stroke: 900 mm - screw diameter: 95 mm - injection  ...

FCS SD-600MSV injection moulding machine was built in 2016 in Taiwan by FU CHUN SHIN MACHINERY MANUFACTURE CO., LTD. Technical specifications of the FCS SD-600MSV injection moulding machine - control system: FCS-3000 - maximum clamping force: 600 t - mould clamping stroke: 900 mm - screw diameter: 110 mm - injection volume: 4274 cm3 - maximum injection weight PS: 3890 g - maximum injection pressure: 1307 kgf/cm2 - injection rate: 899 cm3/s - injection speed: 95 mm/s - injection stroke: 450 mm - minimum mould dimensions: 560 x 560 mm - mould thickness: 300-1100 mm - mould mounting platen dimensions: 1290 x 1290 mm - distance between tie-bars: 860 x 860 mm - ejector stroke: 220 mm - ejector force: 11 t - robot: SHINI ST1 - conveyor belt - cooling device (chiller): RIOU RO-30A - temperature controller in the range 0-400°C (8 pcs.) - heating power: 47.2 kW - pump po ...

Heidelberg Stahlfolder KD78.1/4 KTL-PD, Year 2002 Palletfeeder 4 pockets 2 knives Delivery SB-66/MP. D Stream delivery Gate-fold unit Etc. Available: immediately

BPR BA 35 Asymmetrical CNC tube and profile bending machine with 3 driven rolls Factory REMANUFACTURED, RETROFITTED and UPGRADED in 2020. AS-NEW CONDITION MACHINE ! Contact: info@roce.hr / roce.strojevi@gmail.com Reason for Sale: Very low operating hours. Stored for years as a properly packed backup machine. In 2020, it was sent to the original manufacturer for full factory refurbishment and modernization (although fully functional at the time). After refurbishment, it was again kept in storage as a reserve unit. Now sold only because it is no longer needed as backup capacity. Excellent condition. Ready for immediate use. Description: This CNC-controlled profile bending machine is designed for complex bending operations with continuous radius variation. It allows choice between automatic and manual operating cycles, providing flexibility for different produc ...

Stephan UM44-3 Universal Machine Double coat Temperature sensor Timer Vacuum Pump and Setup Dome on the lid for mounting a feed device or pressure relief valve 3 speeds Knife insert + mixed insert Oil for vacuum pump and instruction manual

Key data: 3500 mm, 12 mm

Schäfer SVRM 3500/12 - CNC 4-roll bending machine - Siemens CNC control with joystick for roller positioning and digital display (renewed in 2006) - Hydraulic tilting of the upper roller by control panel - Rollers made of quenched and tempered material with a strength of 900 N/mm² - Year of construction 1989 Technical data - Max. sheet width: 3500 mm - Bale length of rollers: 3550 mm - Max. sheet thickness bending: 12 mm - Max. sheet thickness bending 4xS/3xS: 8 / 6 mm - Max. insertion limit of the sheets at 20% work hardening: 380 N/mm² - Upper and lower roller diameter: 360 mm - Side roller diameter: 290 mm - Smallest radius to be achieved: 220 mm - Feed speed lower roller: 200 mm/min - Feed speed side rollers: 700 mm/min - Total installed capacity: 22 kW - electr. Control: 380 V / 50 Hz / 3 Ph - Machine weight: 21100 kg

Filling machine Frey Heinrich 20, Piston filler with a capacity of 20 litres, machine mounted on a mobile base, Connection 400V, dimensions LxWxH approx. 60x55x120cm, very good used condition, fully functional

WE SELL AN NICE CONDITION HERMLE C40U FULLY EQUIPED WITH COMPLETE FULL TOLS ACCESSORIESS MACHINE IS WORKING IN PRODUCTION DAILY ORDERS. THIS IS AN VERY NICE OPORTUNETEY MACHINE WILL BE AWAILIBLE IN NEXT WEEKS FOR PICKING UP TECHNICAL DATA: x-travel 850 mm y-travel 700 mm z-travel 500 mm Control HEIDENHAIN iTNC 530 rotary table 800 mm c-axis 0.001º ( ±360º) 0 B-axis (table) º mm number of spindle speeds 18.000 U/min/rpm tool taper SK 40 DIN 69871 spindle drive 15 kW max. torque on the spindle 130 Nm Tools changer 38 fach/tools handwheel HR- 410 total power requirement 41 kVA weight of the machine ca. 10,5 t EQUIPMENT: MACHINE WILL COME EQUIPED WITH COMPLETE WORKING PLACE , WITH ALL COMPLETE TOOLS AND ACCESSORIESS. COMPLETE TOOLINGS COMPLETE CUTTING TOOLS COM ...

GeneralVertical Machining Centres; Control: DMG MORI SLIMline® Multi-Touch control CharacteristicsTable surface900 x 560 mmDimensions (L x W x H)3,03 x 3,49 x 2,94 (5,8 x 5,5 x2,94) mMovement X / Y / Z600/560/510 mmRapid feed X / Y / Z30/30/30 m/minSpindle taperSK 40 DIN 69871 Tool Magazine with60 PositionsMax. torque82 NmTorque (100% DC)54 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmMaximum load (table centre)600 KgWeight approx.5300 KgDirect measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable data exchange between the IoTconnector and CELOS APPs such as the NETservice. The integrated firewall with automatic updates ensures the hProduction Package 40 barProduction Package 40 bar Optio ...

Key data: 510 mm, 3000 mm, 4 St.

HOFMANN AHW 500 YOC 1991 Motor power: 4.0 kW Rated current: 9.5 A Max. planing width: 510 mm TERSA knife shaft (4-knife shaft) Integrated auxiliary stop SUVAMATIC knife shaft protection Joining strip with fastening rail Table length: 300 cm Table height: 84 cm Suction nozzle: 140 mm 4 pcs new knives Drive belt renewed The electrical system was renewed by the previous owner The machine does not have an engine brake. Transport dimensions (approx. dimensions): L: 312 cm W: 140 cm H: 115 cm Weight approx. 900 kg

Ungerer 1800 x 5 mm Max sheetwide: 1800 mm Max sheetthickness: 0,7 > 5 mm Max speed: 16 m/min Number of flattingcoils: 9+8 rolls (dia 55 mm) Power : 28 HP Weight: 9,7 ton

Manufacturer: Hexagon Model: Global 071007 Year of Manufacture: 2014 Find more here - / Contact us at -

Dowel vending machine Koch with a very good condition Incl. window tools IV 68- IV 72- IV-86 as good as new 13,000 EURO Furniture processing is possible: minimum size 30 mm The system is available for immediate delivery PS.: Technical data on request!

Manufacturer: Keyence Model: IM 8020 Year of Manufacture: 2023 Find more here - / Contact us at -

EDM machine Charmilles Robofil 100

Milling machine Deckel FP 4 BJ 1985

Injection moulding machine Arburg 420C 1000-290 BJ 2007

Spiral bevel gear machine ZFTKK 500/3V. Some of the change gears missing

Wood Her Auriga 1308 XL Compact design - edge thickness 0.4 - 8 mm Motorized bridge adjustment PLC Screen Control Edge Control, PPC 319W, 18.5" touchscreen monitor iTronic Adaptive Pressure and Adhesive Quantity Control and Rinsing Routine Pre-milling unit for attaching in front of the glued part Fully automatic edge magazine for roll and strip goods Glue application station GLU JET cartridges + PU gluing, with probing nozzle Workpiece height 8-60 mm Glossy package Printing unit pneumatic Pneumatic cross-cut unit for roll and strip goods up to 8 mm edge thickness with pneumatic adjustment of 0-10° bevel of the cross-cut saws Multifunction milling unit 1827 MOT4 flush milling 8 mm, radius milling – chamfer milling 15° over NC axes Shape milling unit - rounding of corners up to edge thickness 3mm, working height 12 – 60 mm, postforming possible Scraper unit 1929 MOT4, f ...

Key data: 1350 mm, 3 , 150 mm

HESEMANN Multi-purpose surface sanding machine MFA 10 Grinding width 1,350mm TRANSVERSE / LONGITUDINAL / LONGITUDINAL DLB Feed speed 5-25m/min frequency controlled Conveyor belt cleaning device Working height constant 880 mm Workpiece thickness 3-150 mm Motorized adjustable Pressure roller diameter 50 mm in the infeed of the machine Industrial PC 12 inch Operating System Windows XP, E Touch screen Program Memory for 100 programs 1 transverse grinding unit Sanding belt dimensions 5,400 × 150 mm Belt speed 2-20 m/s frequency-controlled Drive power 15 KW Pressure fin system Blasting device, controlled depending on the workpiece 1 longitudinal grinding unit Abrasive belt dimensions 2,620 × 1,400 mm Belt speed 1.8-18 m/s Drive power, 15 KW frequency controlled, Belt blasting device, controlled depending on the workpiece Synchronous and counter-rotatio ...

Key data: 1350 mm, 2 , 150 mm

BÜTFERING AUTOMATIC GRINDING MACHINE SKO 213 RC

Maho MH-C 700 All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)

Code: 0270 Brand: EMME ELLE Model: G.L.C. 1200 - CE Standard Longitudinal glue jointing machine for veneer - CE Standard The longitudinal jointing machine allows a perfect jointing of two veneer sheets in one operation by using a patentedsystem for the glue application. The machine is equipped with two tanks for the mass glue application. This innovation grants high quality and high jointing finishing since the glue is simultaneously applied on both edges to be jointed. The advantages of this type of glue processing are the following: 1_higher working speed (the machine can reach a speed of 35/40 mt/min with some wood types.) 2_In case, for any reason, no glue is applied on one of the two edges, the jointing is anyway granted since the glue is applied on the other edge as well. 3_A high resistant jointing is granted by applying the glue on both edges, since the two sheets  ...

OMEGON Freesbank LxWxH = +/- 1500x 1500 x 2350 mm Table = 1150 x 260 mm All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)

JUNG D22 / Internal Cylindrical Grinding Machine -Machine suitable for inner round + surface grinding -Smallest grindable bore 14mm -Largest grindable bore 150mm -Grinding length without face grinding device 250mm -Grinding length with face grinding device -6x workpiece speeds 46-270 rpm -Spindle box right/left swivel 30 degrees -Distance of the spindle axis over the center of the table 250mm -Largest workpiece spindle/grinding support distance 935mm -Spindle box / inclined position 30 degrees each -Work table / tilt forward/backward 5 degrees each -Hand/automatic operation -Taper grinding device -Bezel -Three-jaw chuck -Replacement grinding spindles

ELB - SWN 5 VA II Surface Grinding Machine -Grinding range X/Y/Z 525x375x255mm -Magnetic plate 700x300mm -Table clamping surface 900x250mm -Table longitudinal stroke 10-625mm -Table load max. 280Kg -Table feed 1-30 m/min -Pendulum grinding 3-30 m/min -Distance - table to spindle center 525mm -Vertical feed speed 2-180 mm/min - Feed size - adjustable 0.001-2mm -Grinding wheel speed 3000 rpm -Coolant device -Machine feet -Documentation -COMPLETE TECHNICAL DATA SEE PHOTOS Dimensions: LxWxH 2.7x2.2x2 meters / Weight 3500Kg

Surface Grinding Machine ELB SWB06-VAII -Grinding length 600mm -Grinding width 500mm -Spindle speed 1400/2800 rpm -Z - Delivery / Automatic / Manual -Y - Delivery / Automatic / Manual -Grinding Movement / Automatic / Manual - Magnet size 600x500mm -Automatic delivery -Grinding wheels - Pulling device -Grinding wheel diameter max. 300mm -Coolant device -Drive cable approx. 6 KW Dimensions: LxWxH 2.6x2.2x2.5 meters / Weight 3500Kg

Tool Milling Machine Deckel FP2E -Extremely smooth running + fully functional -Automatic feeds + rapid traverse in X + Z axis -Machine with sliding head means larger Y-travel -Travel X/Y/Z 400x200x400mm -Speed range 40-2000 rpm -Tool holder ISO 40 -Vertical horizontal milling device -Vertical head swivel with drilling quill -Angle table -Various tool holders -Documentation Dimensions: LxWxH 1.5x1.7x1.8 meters / Weight 1500Kg

Gillardon GB16 Column Drill -Drilling capacity 22mm -Tool holder adapted to MK 3 -Quill stroke 120mm -Stand projection 250mm -Distance from spindle table (min./max.) 30/380mm -Spindle speeds 400-2500 rpm -Power 0.37 kW Dimensions: LxWxH 0.7x0.7x1.8 meters / Weight 400Kg

General SKUR0331 MakeBüter Hebetechnik GmbH (D) LocationBarneveld TypeH 11-06 Main Features MaterialMild steel Motor1.5 KW Height600 mm Specified Features - Lifting/tilting machine MaterialMild steel Lifting machinecheck Max. weight1100 Kg Lifting height0,6 M Hydraulic drivecheck With hydraulic unitcheck Motor1,5 kW 400 Volt Information No.A 11 11720 Year of construction2012 Floorspace2,5x1,6 M Total height0,7 M Weight750 KgLifting/tilting machinesBüter Hebetechnik GmbHConveying systems > Lifting/tilting machinesBrand > Büter Hebetechnik GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Mass finishing machine / WALTHER CC315 incl. control system -Model CC315 -Speed range 945-1445 rpm -Separate control/on/off/timer etc. -Soundproof cover -Waste water cover Dimensions: LxWxH 2x1.6x1.6 meters / Weight 850Kg

General SKUR0330 MakeBüter Hebetechnik GmbH (D) LocationBarneveld TypeH 11-06 Main Features MaterialMild steel Motor1.5 KW Height600 mm Specified Features - Lifting/tilting machine MaterialMild steel Lifting machinecheck Max. weight1100 Kg Lifting height0,6 M Hydraulic drivecheck With hydraulic unitcheck Motor1,5 kW 400 Volt Information No.A 11 11720 Year of construction2012 Floorspace2,5x1,6 M Total height0,7 M Weight750 KgLifting/tilting machinesBüter Hebetechnik GmbHConveying systems > Lifting/tilting machinesBrand > Büter Hebetechnik GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU331S605 LocationBarneveld MakeBrabender (D) Specified Features - Viscosity test machine Variable speedcheck Speed5-120 rpm With computerDell With extruder(1x) With double screw extruder(1x) TypeDSK 42/7 Screw dia.42mm L/D7 Number of heating zones:3 Information TypePLasti-Corder 814400 / PL 2000 No.911021 / 901455 Floorspace1,7x0,7 M Total height1,6 M Weight500 Kg Extra Specificationsworking condition tested Viscosity test machinesBrabenderPlastic machinery > Viscosity test machinesBrand > Brabender What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKUR0333 MakeBüter Hebetechnik GmbH (D) LocationBarneveld TypeH 11-06 Main Features MaterialMild steel Motor1.5 KW Height600 mm Specified Features - Lifting/tilting machine MaterialMild steel Lifting machinecheck Max. weight1100 Kg Lifting height0,6 M Hydraulic drivecheck With hydraulic unitcheck Motor1,5 kW 400 Volt Information No.A 11 11720 Year of construction2012 Floorspace2,5x1,6 M Total height0,7 M Weight750 KgLifting/tilting machinesBüter Hebetechnik GmbHConveying systems > Lifting/tilting machinesBrand > Büter Hebetechnik GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU207P139 LocationBarneveld MakePESTER VERPACKUNGSMACHINEN TypePEWO-PACK 450 SN No.4047 Main Features Width450 mm Specified Features - Transwrap machine Transwrap machinecheck Contact parts stainless steelcheck Suitable for film material:0,02mm - 1,0mm (PE) Sealing width30 - 300mm Electric capacity16,0 KW /33A Information Year of construction1997 With switchcheck Floorspace5.0X1.5 M Total height2.2 M Weight2320 KGTranswrap machinesPesterPackaging machines > Transwrap machinesBrand > Pester What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Hagen & Göbel HG22EB Tapping Machine -Type HG22EB -Brand Hagen & Göbel -Speed range 180-1120 rpm -Table dimensions approx. 600x500mm Dimensions: LxWxH 1.1x0.7x2.0 meters / Weight 1000Kg