wood boring machines used for sale

DÖRRIES CTE 300 -5100 V6 - CNC CAROUSEL LATHE Year of construction : 1980 Electrical and electronic overhaul : 2002 Chuck diameter : 3,000 mm Max. swivel range : 6,000 mm Max. turning height : 2,700 mm Max. table load : 50 T Travel: X-axis : 2,550 mm Z-axis : 1,250 mm Y-axis : 5,054 mm (table) With C-axis Column travel : 1,250 mm Control Siemens : Siemens 840C Angle milling head

MOWEG (NILES) DKZ 4000 -UNIVERSAL CAROUSEL LATHE Year of construction : 1977 Chuck diameter : 3,500 mm Max. swivel range : 4,000 mm Max. turning height : 2,000 mm Max. table load : 20 T Column travel : 1,250 mm With digital display

Sunnen 1804 Honing machine, manual under power The machine can be seen working in our warehouse in Gussago BS. Test run possible Mimu Machine Tools, Honing dia (min-max): 1.5-120, Honing length (max): 250

VISION WIDE SF-2116 CNC PORTAL MILLING MACHINE Year of construction 2016 Fanuc 31i ModelB Table : 2000 X 1500 mm X-axis travel 2000 mm Y-axis travel 1500 mm Z-axis travel 800 mm Engine power: 44 kW With tool changer Total weight : 20t approx. Horizontal Head 90 Degree

The VOGEL YS501X ECONOMIC carton sealing machine is our recommendation especially for rather large carton formats that are glued in series Carton formats: Length 150 – ∞ mm Width 150 – 500 mm Height: 140 – 560 mm Specifications: Operating voltage 220 V CE marking Accessories: In addition to our VOGEL carton seamer range, we offer rollers, feed and trailing tables, as well as roller conveyors. Our YS501X ECONOMIC carton sealer is a cost-effective solution when it comes to securely sealing cartons in rather large formats. Two side conveyor belts ensure that your cartons are safely transported through the carton sealer. The carton width is adjusted mechanically via a crank. The height adjustment is particularly easy and quick to solve on this machine, because the upper gluing unit only has to be unlocked and can then be easily brought to the respective height. Due  ...

PINNACLE DV - CNC PORTAL MILLING MACHINE Year of construction 2010 Mitsubishi M70 Table : 2200 X 1200 mm X-axis travel 2200 mm Y-axis travel 1200 mm Z-axis travel 1000 mm Motor power: 32 kW With tool changer Total weight : 19t approx. Horizontal Head 90 Degree

Key data: 8000 mm, 3 mm

Machine is in stabillier welded construction with 9 columns, 9 clamping cylinders and 36 coupling joints K38 mounted on a base frame The machine has the following equipment: CNC 8000 Control with Touch Screen TFT Color Display 17 Inch Attachment rail, brush table, upper beam with water seam groove Oil filling, fastening and levelling material, emergency stop rail via the Full length of the machine, integrated emergency stop operation in the foot pedal for upper and lower Bending beam, 2nd foot pedal for 2-man operation, upper bolster protection 2 short-part clamping fingers Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Working length: 8000 mm Sheet thickness max. steel: 3.0 mm Sheet thickness max. aluminium: 4.0 mm Sheet thickness max. VA: 2.0 mm Back gauge (max:.) 1150 mm Back gauge (min.): 150 mm Colo ...

YOU-JI YV600E - CNC CAROUSEL LATHE Year of construction : 2016 Chuck diameter : 600 mm Max. swivel range : 800 mm Max. turning height : 600 mm X: -50mm / +485mm Z: 800 mm Max. table load : 1 T Column travel : 1,250 mm Total power : 32 kW Machine weight : 15.5 T (approx.) Control: FANUC Oi-TD

Double-end profiler Schröder Double-sided tenon cutting and slitting machine For window production and frame woodworking Type T2701 Working width max. 4000 mm 3 motors per side: Shortcut saw 3 kW Milling machine 7.5 kW Milling machine 9.2 kW Shortcut saw swivel Saw blade diameter 400 mm Horizontally controlled against 8-fold turret head Milling units controlled horizontally and vertically for holding 2 tool sets each Diameter of the milling shafts 40 mm Clamping length 240 mm, tool diameter up to 400 mm Electric width adjustment Pneumatic clamping of workpieces Eject to the rear Automatic feed 15m/min. Return 30 m/min. Gentle cycle at cutting points 5m/min. Feed motor 0.09/0.85 kW Control cabinet with control With occupational safety barrier Dimensions 5800 mm x 2320 mm x H 2000 mm + Control cabinet 1200 mm x 800 mm H 1600 mm + Barrier depending on ...

TAKISAWA TW-46 - CNC LATHE Year of construction : 2008 Specifications:- Center spacing/turning length: 900 mm- Turning diameter : 450 mm -X:250 mm -Z:900 mm- Spindle passage diameter: 60 mm- Engine power: 20 kW - Total weight: 6500 kg

Demonstration machine as good as new! hydraulic tapping machine with parallel arm Model: RHR24 (M3-M24) Standard - Ball bearing wear-free parallel arm, radius: 1800mm - Hydraulic system 400 V / 3Ph (mounted in the lower box) - Digital speed display and digital depth control, duty cycle of your choice - Manual: Direction of rotation right/left by means of press studs - Automatic: digital input of depth, at the set depth the direction of rotation is automatically reversed - Wide speed range, working and return speed Separately electronically adjustable (by means of frequency converter) - Clamping table 800 x 600 mm with T-slots - Micro spray system for tool lubrication (integrated in the machine head) - Lower box - Quick-change mount for Bilz thread holders, among others

Width 72 cm Year of construction 1992 Pallet feeder with suction head 4 fold pockets in the parallel fold section 2 folding swords in the crossfold section 1 more fold pocket after the 1st cross break Noise Insulation Hood Downstream knife shaft Shed display Delivery date: immediately from stock Price on request. We supply and install worldwide.

Demonstration machines as good as new: Standard - Ball-bearing wear-free parallel arm, radius: 1270 mm or 1800 mm - Connection 230 V / 1Ph - Speed infinitely adjustable - Digital speed display and digital depth control, duty cycle of your choice • Manual: Direction of rotation right/left by means of press studs • Automatic: at the set depth, the direction of rotation is automatically reversed • Memory for 5 depth programs/edits, incl. piece counter (see page 2) - Lubrication system for tapping (only with 2 articulated arms(1800)) - Quick-change mount for Bilz thread holders, among others - M models are designed with a multi-position head All D+ models are equipped with digital depth control - Digital speed display - Manual work cycle: Direction of rotation right/left by means of push buttons - Automatic work cycle: • Digital input of slope and depth, at the s ...

Inv. Num. : 8658 Type: AF 221 Producer: Elumatec Created: 1997 Parameters: Max Speed: 2800 1/min

Thread rolling machine ORT RP18 B 2-roll, overhauled, See video The machine is in our warehouse in Gussago BS, under power Test run possible Mimu Machine Tools Italy, Power (Ton): 18, Number of rollers: 2

4 x Demag injection moulding machines Demag 80 to BJ 2005 Demag 420 to BJ 2003 Demag 420 to BJ 2005 Demag 420 to BJ 2008

Inv. Num. : 8662 Type: Rondamat 960 Producer: Weinig Generated: 2000 Parameters: Max. Speed: 1500-3000 1/min Grinding wheel diameter: 150/225 mm Grinding wheel drilling: 60 mm

Machine de mesure tridimensionnelle Marque Renault SEIV type portique CNC Dimensions : 2000 x 1500 mm Courses en X : 1480 mm Courses en Y : 1180. mm Courses en Z. : 890 mm Elle est composée d'une table n marbre , de 3 liaisons glissières , d'un pupitre de commande , d'une commande numérique et d'un palpeur .

Used Capping Machine AVE 6T up to 7000 bph The used capping machine AVE 6T up to 7000 bph delivers high efficiency and versatility for the bottling industry. Specifically, it handles medium to high-speed production lines, ensuring consistent and reliable results. Furthermore, the machine for Stelvin Lux uses six capping heads to provide precise and uniform operation throughout every bottling cycle. Moreover, its design maximizes production speed, enabling the handling of up to 7000 bottles per hour. This performance, in turn, supports businesses aiming to improve operational efficiency and maintain consistent product quality. The system supports aluminum screw caps of the Stelvin Lux type, measuring 30×60 mm. Consequently, this cap type creates an airtight seal, preserving product integrity and extending shelf life. Producers in the wine and beverage industry often choose this forma ...

Type: ES5000 Serial number: 176 Year of construction: 2008 Labels: 60.3 x 19.8 mm Printing range: 38 x 18 mm Printer: Kortho hotprinter Compressed air: 6 Bar, 0.2Nl/cycle Power: 230VAC, 50Hz, 2.2kW Dimensions: 550 x 600 x 1400 mm Weight: 80 kg In combination with FCA or ICA type clipper

Key data: 19 mm

Please ask for more details!

DOSITECNO MONOBLOC DZPN/DRC dosing and filling machine for cosmetic products (creams) for sale. Year 2005. Special for creams (cosmetic). INOX AISI 304 bench. Bucket tape for different formats. Gear pumps with double tank. Double shutter positioning. Plug table with pick & place. Capper with electromotor. Safety controls: presence of packaging, shutter and cap. Formats: 15, 25, 50, 75, 100, 275, 500 and 1000 ml. 2 filling nozzles, the second for 1000 ml. Max. speed: 25 units/minute. Tooling and different formats available. Power: 7.5 kW. Serial number: 210218. With CE Certificate and documentation available.

Used Autojet RAPID 3002 cartoning machine. New 2019. The Rapid 3002 is a semi-automatic machine for packing sachets into cartons. The maximum capacity of the machine is 180 pieces/min. The device consists of a main machine and feed conveyors. The main machine consists of a receiving and grouping chain, a scraper actuator with a tilting scraper, a lifting table with pressure actuators, a pusher, and a carton nozzle.

PET bottle blow moulder, with a production capacity of up to 4000 b/h (depending on the format). For formats between 0.25lts and 3lts. Composed of: -. Furnace for heating preforms composed of 6 heating modules of 8 infrared lamps each. -. Preform Transfer Wheel -. Two-stage compressed air blowing body, low-pressure pre-blowing and subsequent high-pressure blowing. -. Bottle Transfer Wheel Delivered with pallet turner. DOCUMENTATION AVAILABLE

1 of used high-seeed film-only shrinkwrapper / multipacker, make KHS/Kisters, type Innopack SP A-H, new 2013. Operating side: left. Used for beverage cans diameter 66 and 58 mm in various collations. Siemens S7 PLC with MI-servo controls. Gas-fired shrinktunnel (can be converted to electrical).

Manufacturer: Perfecta Schmid Model: DUPLOMAT 86 N ELTRON III Power Requirements: 3 x 380 V, 50 Hz Find more here - / Contact us at -

1 of used high-seeed film-only shrinkwrapper / multipacker, make KHS/Kisters, type Innopack SP A-H, new 2013. Operating side: right. Used for beverage cans diameter 66 and 58 mm in various collations. Siemens S7 PLC with MI-servo controls. Gas-fired shrinktunnel (can be converted to electrical).

740 x 1,050 mm max. / 330 x 480 min. Size MABEG Scale Layer Flatbed die-cutter Punching force 1.8 MN / approx. 182 t HFS Hot Foil System Feeder stack 115 cm Display stack 85 cm Total meter approx. 12 million

1 of used medium-speed film-only shrinkwrapper / multipacker, make KHS/Kisters, type Innopack SP A-M, new 2013. Operating side: left. Used for 500 ml PET bottles in various collations at a maximum speed of 70 cycles per minute (depending on format). Siemens S7 PLC with MI-servo controls. Electrically heated shrinktunnel.

Year: 2010 technically efficient, ready to work – after full service rotary table (3-sided profile machining) cooling and lubrication system copying template compressed air preparation station pneumatic clamps (4 vertical and 2 horizontal)

With tooling

2 x milling machines Kunzmann WF 650 BJ 2005

Injection moulding machine Engel e-motion 2440/380 T BJ 2008

2 x Husky HL500RS80 2016 injection moulding machines

4000w IPG / 3D Head / 8500mm bundle loader / 8500mm single bar loader / 6500mm unloader

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmMax. Turning Length1200 mmTurning diameter500 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle diametre on front bearing130 mmSpindle bore87 mmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 Spindle speed-12000 rpmDrive power (100% DC)19 kWDrive power (40% DC)22 kWTorque (100% DC)85 NmTorque (40% DC)120 Nmlocking moment8 ...

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmBar diameter max.65 mmMax. Turning Length1200 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperCapto C6 Spindle speed-12000 rpmDrive power (100% DC)19 kWDrive power (40% DC)22 kWTorque ...

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length1200 mmBar diameter max.75 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 ...

Zeiss UPMC 850 Carat measuring machine for sale • Travels: X = 750mm; Y = 850mm; Z = 600mm • Portal design • Pushbutton magazine with 8 slots • Measuring ball • Probe set • HP working station with monitor

Rafamet KCFB-320 Vertical Boring Mill 125.98” Table Diameter, 137.79” Max. Turning Diameter, (2) Swiveling Ram Heads, 39.4” Ram Stroke, +/- 30 Degrees Ram Swivel, 98.4” Height Under Rail, 0.8-40 RPM Table Speeds, 55,000 Lbs. Table Capacity, Pendant Controls, 2-Axis Quadra Check Digital Readouts, Side Head, Threading & Taper Turning, 75 HP Table Motor, S/N 126240

Rafamet KCFB-320 Vertical Boring Mill 125.98” Table Diameter, 137.79” Max. Turning Diameter, (2) Swiveling Ram Heads, 39.4” Ram Stroke, +/- 30 Degrees Ram Swivel, 98.4” Height Under Rail, 0.8-40 RPM Table Speeds, 55,000 Lbs. Table Capacity, Pendant Controls, 2-Axis Quadra Check Digital Readouts, Side Head, Threading & Taper Turning, 75 HP Table Motor, S/N 126240

Gurutzpe B1800/3 CNC Lathe Fanuc Oi-TD CNC Control, 52” Swing Over Bed, 372” Between Centers, 36” Cushman 4-Jaw Independent Chuck, 41” Swing Over Carraige, Spindle Speeds 1-300 RPM, 4.33” Spindle Bore, Sauter 4-Position Turret, 48,400 Lbs. Weight Capacity (Unsupported), 70,500 Lbs. Weight Capacity (2 Steadies), Hydraulic Tailstock, (3) Roller-Type Steady Rests, Full Length Scale on Z-Axis, Hennig Chip Conveyor [CNC Retrofit 2010]

G+H precision external cylindrical grinding machine RS 600 CNC / P for machining multiple diameters in a single setup, in plunge or oscillating mode. Grinding table driven by a digital servo axis, ball screw with a 10 mm pitch, axis speed 0.01 mm/min - 15 m/min, positioning via linear scale, resolution 0.001 mm, V-flat slide guide, guideways are Turcite-B coated. Disc feed support driven by a digital servo axis, ball screw with a 5 mm pitch, axis speed 0.01 mm/min - 10 m/min, positioning via linear scale, resolution 0.0005 mm, V-flat slide guide, guideways are Turcite-B coated. Workpiece headstock with digital servo spindle, positionable with initiator for detecting the reference mark, adjustable 0-1000 rpm; 2.7 kW power, MK5 taper bore, max. grinding diameter 260 mm. Tailstock with hydraulically operated quill, fine adjustment of cylindricity, max. center distance 600 mm. Center height  ...

G+H precision finishing machine FI 600 for machining multiple diameters in one setup., Feed table driven by digital servo axis, ball screw with 5 mm pitch, axis speed 0.01 mm/min – 15 m/min, positioning via internal encoder, resolution 0.001 mm, mechanical cylindricity adjustment +10° - 4°, V-flat slide guide, guideways are Turcite-B coated., Z-table movable for positioning a sword finisher, The Nagel finishing head is provided by the customer. Workhead with digital servo spindle, positionable with an initiator for detecting the reference mark, adjustable from 0-1000 rpm; 2.7 kW power, MK5 taper bore, max. grinding diameter 260 mm. Tailstock with hydraulically operated quill, fine adjustment of cylindricity, max. center distance 600 mm, center height 140 mm., Full-room machine enclosure, approximately 2.3 m high, open on the sides, with integrated loader. Front sliding door electrica ...

Injection moulding machine Krauss Maffei KM 50/90 C2 BJ 2001

AGEMA high-speed drilling machine AS 210 The machine is assembled and functional in the showroom. • Well-maintained machine. • Built in 2007 • Tank has been cleaned • Electrode diameter: 0.15 up to 3 mm • Maximum drilling depth: 100mm • Max workpiece weight: 20kg • X, Y, Z travels: 200 x 100 x 140 mm

RAMATIK - Automatic machine for the production of concrete products on a concrete surface (track). Manufacturer - JOSEF RADINGER – Klagenfurt - Austria Year 2007 The machine is of Austrian origin. Massive construction and very flexible. The wheelbase is 120 cm. It operates on 380 V. The minimum fuse rating is 35 A. The weight of the machine without the model is approximately 5 tons. The machine operates via Hawe hydraulics and electromagnetic valves. The machine was last generally renovated in 2021 It is set via a touch monitor. touch. The program on the screen can be programmed in any language. The machine can be converted into a stable machine because it has an internal table with high-frequency vibrators. The machine includes two sets of vibrators and up to 10 metal molds (models) for concrete blocks, concrete corner blocks and external chimney blocks. The machine ...

Column Drill FLOTT 32 STG Year of Make: 1992 Drilling capacity in steel 32 mm Clamping surface table 500 mm x 360 mm Drilling depth adjustment with digital display Drilling depth 150 mm Spindle mount MK 3 Spindle speeds 140 rpm – 1400 rpm infinitely variable with digital display Drill Table Lighting

SIMATIK - Automatic machine for the production of concrete products on a concrete surface (pista). The machine is of Austrian origin, about 30 years old. Massive construction and very flexible. The wheelbase is 120 cm. It operates on 380 V. The minimum fuse rating is 25 A. The weight of the machine without the model is approximately 4 tons. The machine operates via hydraulics and electromagnetic valves. The machine was last generally renovated in 2022. The complete electricity was replaced, so that the machine can now be operated automatically, semi-automatically or manually. It is set via a touch monitor. touch. The program on the screen can be programmed in any language. Some bearings and seals were also replaced, and the structure was also renovated. The machine includes two sets of Knauer vibrators and hydraulic tongs for palletizing or loading products. We also add fo ...

Waterjet machine Flow Incl. new maintenance kit pump incl. documentation Year of Make: 2006 Manufacturer: FLOW Europe GmbH Manufactured Date: 11/05 Working area: (L x W x H): 3600 x 2000 mm Continuous working pressure: 3,800 bar High Pressure Pump: FLOW – Hyplex Pump Model HyPlex 50 Hours: 4342 hours Maintenance intervals: Regular according to maintenance schedule Last service at: 4102 hours (major pump maintenance) Software: Flow-Master PC Software Flow PATH Module, Version 6.0 Flow CUT Module, Version 6.0 Flow Master 6.0 Professional (FlowNest) Hardware clamping and clamping device, Flow, set-up and positioning aids with laser pointer, Devices 1x Sand Silo 1x Sand mixer unit Flow 1x Water Softening (WTS) 1x collision sensor defective Documentation package, Various spare parts, all pre-pipes and cables