wood band saw used for sale

Machine number: 4818 Operating voltage: 400 V Frequency: 50 Hz Rated current: 1.5 A Grinding wheel diameter: approx. 250 mm Auction-ID: A7-49089-377

Weinig OptiCut 260 optimisation cross-cut saw for cutting timber to length and removing sections with defects (marked with fluorescent chalk). The separate measuring station records the lengths and marked defects. Technical data: Cutting height: 260 mm Saw blade diameter: 500 mm Input length: 400 – 6,300 mm Input thickness: 12 – 80 mm Feed rate: max. 250 m/min Cycle time: approx. 1 sec Saw motor: 7.5 kW Marking station: 5,000 mm Outfeed conveyor: 7.5 m with 3 pneumatic ejectors Control system: OptiCom Pro Condition: Gebraucht Location: Tauberbischofsheim, Germany

Year: 2017 - technically efficient, ready to work – after full service - disc diameter: 420 mm - cooling installation - double-sided pneumatic clamp - hydraulic feed brake - pressure reducer

Kaltenbach KKS 450 U Metallkreissäge (2021) Hersteller: Kaltenbach Typ: KKS 450 U Baujahr: 2021 Zustand: gebraucht, sehr gut Spannen, Sägen, Rücklauf, Öffnen ? einfach per Knopfdruck Halbautomatische Gehrungskreissäge Arbeitsbereich 150 mm Sägeblatt Ø bis 450 mm Gehrungsverstellung 180° Einstellung der Schnitthöhe über Drucktaster Zwei Schnittgeschwindigkeiten Lieferumfang: ? Dokumentation ? 2m Zufuhrrollenbahn ? 2m Abfuhrrollenbahn mit digitalen Materialanschlag ? 2x Sägeblätter

Model FSK Dimension of sliding table- 3000x330mm Gross cut capacity- 2700mm Width of cut between saw blade and rip fence - 1650mm Saw blade diameter - 400mm Scoring saw blade diameter - 120mm Height of cut - 125mm Speed levels 3 Tilting saw blade - 0-45º Saws lifting, up and down, mechanical control. Main motor - 5,5 kW Scoring motor - 1,1 kW With clamp Weight: 780 kg Transport dimensions - 3100x1300x1200mm Price 1500 Eur (EXW Jonava, Lithuania)

Key data: 45 °, 2250 mm, 900 mm

400 V, 50 Hz, 5 Kw, 10 A, Sliding table 2250x270 mm, Boom table 950x600 mm, Cut-to-length stop 2650 mm, extendable, Cutting width 900 mm, Cutting height 90 mm, Saw blade 250-315 mm, Extraction connection 125 mm, Work table 1500x1000 mm, Weight 410 kg

Behringer Eisele VMS 350 Vertikalkreissäge / Metallkreissäge Hersteller: Behringer Eisele Typ: VMS 350 Zustand: NEU Bearbeitungsquerschnitt max. rund bei 90° 120 mm Bearbeitungsquerschnitt max. Rechteck bei 90° 170 x 100 mm Bearbeitungsquerschnitt max. rund bei 45° 120 mm Bearbeitungsquerschnitt max. Rechteck bei 45° 120 x 100 mm Sägeblattdurchmesser 350 mm Sägeblattbreite 3 mm Bohrungsdurchmesser 40 mm Einstellbare Sägeblattdrehzahl 17 U/min / 34 U/min Maschinenoberteil schwenkbar 45-90-45-30° Motorleistung gesamt 1.4/1.9 kW Breite 900 mm Länge x Breite x Höhe 1050 x 900 x 1900 mm

Year: 2009 - technically efficient, ready to work – after full service - disc diameter: 500 mm - max. cutting length: 3000 mm - hydropneumatic feed - vertical and horizontal pneumatic profile mounting

Circular sawing machine. Raw bitsun, unfortunately no technical data.

Number of motors: 1 Stück 0: 2500 mm Control: nein Hecht ES 350 single-sided glazing bead saw -------------------------------------- Pneumatic pivoting against fixed stops. 45º/ 90º/ 135º with pneumatic sawblade feed pneumatic tilting via manual tilt stop with machine base, pneumatic clamping HM sawblade 350 x 3.0/2.2/30 Z 100 Saw stand dimensions: length 700 mm, depth 1,600 mm, height 1,500 mm 1.5 m touch stop 1.5 m support with support 3 m touch stop Support extension from 1.5 m to 3 m with support Table inserts grooved for rebated glazing beads HECHT ASB manual length stop with digital display, 2,500 mm With dust extraction unit (Technical specifications according to the manufacturer - no guarantee!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 315 mm cutting diameter: 100 mm : mm cutting speed: 40 / 80 U/min total power requirement: 1,2 kW weight of the machine ca.: 0,3 t dimensions of the machine ca.: 0,8 x 0,6 x 1,65 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutting length: 4,300 mm Control: Power Control Scoring saw: 2.2 kW Cutting depth: 2,200 mm Software: CADmatic 4.0 Saw blade guard: 95 mm Collets: 7 pieces Main saw blade: 350 mm Scoring saw blade: 180 mm Air table: 4 Saw carriage speed forward: 1 - 150 m/min Saw carriage feed return: 150 m/min Program slider feed flow: 90 (EU max. 25) Program slide feed return: 90 m/min Main motor: 13.5 kW equipment: Central angle pressure device Label printer integrated into print bars Completely gloomy machine table Automatic pressure beam height control Automatic cutting height Adjustable contact pressure pressure beam (soft-touch package) Adjustable Contact Pressure Collets (Soft-Touch Package) 5 to. Lift table 1 Power-Concept collet (can be positioned independently of the program slider) Speed Package Groove program Label printer PICA 108 Auction-ID: A7-32339-3

Production number: 153 Saw blade diameter: approx. 300 mm Table dimensions: 940 x 830 mm incl. carriage Carriage length: 1300 mm Slide projection: 900 mm Saw blade swivel: from 45° to 90° Auction-ID: A7-49089-521

Sawblade tiltable: 0-46 ° Length of the rolling table: 3200 mm cutting width: 1000 mm Motor output: 5,5 kW Cutting height: 179 mm Cutting height at 45°: 123 mm Saw blade diameter: 500 mm Speed: 3/4/5000 U/min. weight of the machine ca.: 1300 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sliding table saw Eima Type 120 Max. Cutting Width: 2068 mm Min. cutting width: 300 mm Maximum blade diameter 400 mm Cutting height ~100mm Motor power 2×4.4kw Electronic Cutting Width Eats Technical documentation and CE certificate Year of manufacture 1999

Key data: 45 °, 3700 mm, 1000 mm

Experience precision and quality with the Altendorf sliding table saw type F45, an indispensable tool for any woodworking. Equipped with a robust 5.5 kW motor, this high-quality device enables clean and efficient cuts in a wide variety of wood species. The machine is characterized by its space-saving requirement of only 23002900910 mm and is easy to position with a weight of around 1000 kg. Made in Germany in 1992, the circular sawmill stands for durability and reliability. Its country of origin and year of manufacture guarantee excellent workmanship and technology that is specially tailored to the requirements of woodworking. Ideal for craftsmen and professionals who value precise results and solid workmanship. Various accessories according to photo Test run possible, only collection, help with loading possible. Prepayment or cash on pick-up No Guarantee or Warranty

- Cleaning and screening facility designed for the treatment of sawdust with separation of metals, plastics and aggregates. - Capacity approx. 750 kg/h. - Includes: • Elevator belt at the entrance to the tower. • PAL vibrating screen for initial particle size separation of sawdust. • PAL densimetric separator that performs density separation between woody material and light contaminants (plastics, papers, films, foams, etc.). • PAL RC 600.2 refiner: engine power 45 kW. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-49881-5

Multi-rip saw Manufacturer: Raimann Model No.: KS230 Year of Make: 1992 Saw Motor 22KW

Panel saw Type: F45 ElmoDrive Manufacturer: Altendorf Year: 2022 Basic equipment: Sliding table 3400 mm CNC-controlled parallel fence, electromotor-adjustable 0–1300 mm Mitre fence extendable up to 3200 mm Main motor power 5.5 kW / speeds 3000/4000/5000 rpm Max. blade diameter: 500 mm Max. cutting length: 3300 mm ELMO DRIVE control system 12” touch display with keyboard Up to 9,999 programs Automatic dimension correction when cutting at angles Extended tool management (up to 100 stored tools) Functions: grooving, angle cutting, geometric shape calculations, calculator, USB interface, machine diagnostics Automatic calculations for angled and bevel cuts Simple, intuitive interface with quick access to functions Machine equipment: Increased main motor power to 5.5 kW CNC parallel fence – cutting width 1300 mm Extension of the sliding table to 3400 mm DIGIT L an ...

Cutting length: 3100 mm Cutting height: 45 mm Motor output: 1,8 kW Dimensions (L/W/H): mm machine weight ab.: 500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of motors: 1 Stück 0: , mm Control: , 0 cutting width: 115 und 82 mm Cutting height: 55 mm Motor output: 2.0 kW machine weight ab.: 45 kg Graule KS crosscut saw for cutting (glass) beads with a rebated joint with manual and electronic length stop Suitable for wood, PVC, aluminum ----------------------------------------------- Brief manufacturers description: - Crosscut and miter saw for precise and user-friendly cutting to length in the strip area - Sturdy gray cast iron construction - A double ball-bearing axle acts as a pivot point below the material support table, facilitating material cutting. The cut is always made at the rear top. - Quick miter adjustment up to 45° - Readjustable fixed stops at 90° and 45° - Upper saw blade guard can be connected to extraction system ----------------------------------------------- Technical data: Motor: 400 V / 2.0 kW Speed: 2,800 rpm Ma ...

Technical data: Manufacturer: FomIndustrie Type: MIRAGE 600 Year of Make: 2019 Control: POWER R (electric) Possibility of using a saw blade Saw blade ⌀: 355 mm (iron) TCT saw blade ⌀: 400, 500 or 600 mm (aluminium/light alloy) Performance Minimum speed: 1,250 rpm Maximum speed: 1,800 rpm Fixed cut: 90° Three-phase motor M112: 7.5 kW Average operating pressure: 550 NL/cycle Operating pressure: 7 bar Working Range/Load Width of work surface left: 200 mm Width of work surface right: 150 mm Smallest bar passage: 105 mm max. load: approx. 500 kg Dimensions and weight Dimensions L/W/H: 3,000 mm, 1,950 mm, 2,050 mm Weight: 850 kg Condition Condition: Used Functional: tested and fully functional Other equipment and accessories included: Roller conveyor Pre-installation for chip and smoke removal Front hood with manual opening Integral protective h ...

Saw blade 350 mm Guide stop 60 mm high Maximum cutting size 90 x 170 mm Fixed corner locks left and right 10-15-22.5-30-45 degrees All degrees can be adjusted separately from 46-90-46 degrees. With base and aluminum stop with two lugs adjustable up to 3500 mm. Base is made of wood and is 4700 mm wide x 750 mm deep and 970 high. With spare protective cover and a sawdust trap. Auction-ID: A1-48994-30

Technical data Manufacturer: Striebig AG Type: Standard II Plus 6220 A Serial Number: 22823 Year of Make: 1992 Saw blade diameter: 300 mm Saw blade speed: 4750 rpm Motor power: 4.5 kW Engine speed: 2880 rpm Max. cutting width: 5300 mm Max. cutting height: 2100 mm Max. panel height: 2200 mm Max. machining thickness: 80 mm Dimensions: approx. 6500 × 1300 × 2880 mm Weight: approx. 900 kg Configuration Equipment: Vertical panel saw with small parts support and integrated extraction. Remarks Condition: Used, according to the present description good condition. Operating hours unknown. The EN 50699 measurement was not passed. Auction-ID: A1-50026-1

Digital adjustment and readout of the longitudinal conductor and digital adjustment and readout of the crosscut conductor slide. Aluminum saw carriage length 3400 mm. Maximum digital cutting width 1300 mm. Maximum digital cut-off size 2800 mm. With saw carriage lock for easy placement of larger plates and workpieces on the carriage. Digital readout of the height of the saw blade, and digital adjustment of the angle of the saw blade. Tipp-on variable servo drive control of the long saw carriage that can be controlled with a controllable joy-stick, it can also be used to regulate the speed of the saw carriage. With two vertical snaps for the saw trolley to press wood or plates. A plastic cover strip is not present on the digital crosscut guide. Equipped with an aluminum blade extension to the right of the saw of 93 cm and a length to the back of 135 cm. Blade extension behind the ...

2800 rpm, Saw blade 350 mm, Pull-out arm 620 mm, With lock for unintentional forward of the ball-bearing saw unit, wooden saw table of W= 4700 mm and D= 830 and H= 1000 mm including guide. With metal extraction tray behind the saw. Auction-ID: A1-48994-33

With saw blade 200 mm, thickness 2 mm The saw unit has been a rebate saw for the back of a circular saw, adjustable in height and depth. Auction-ID: A1-48994-51

Saw unit adjustable 45-90-45 degrees. Auction-ID: A1-48994-41

Automatic seaming system Approx. 5.30m cutting length Laser Measurement With or without separation Built in 2005 from small sawmill

Technical data Manufacturer: Altendorf Type: F 45 Machine No.: 90-3-121 Year of Make: 1990 Max. saw blade diameter: 350 mm Voltage: 380 V Main saw motor: 5.5 kW Scoring unit: available Saw blade speeds: 3,000 / 4,000 / 5,000 / 6,000 min⁻¹ (Source: Online research) Configuration Sliding table length: approx. 3,200 mm (source: online research) Cutting width: approx. 1,250 mm (Source: Online research) Max. cutting height: approx. 105 mm (Source: online research) Saw blade: swivels up to 45° (Source: online research) Suction: Extraction connection and extraction hood available. Note Some of the technical information has been supplemented on the basis of verified online sources and marked accordingly in each case. The information has been researched to the best of our knowledge and belief. No guarantee is assumed for completeness and accuracy. A viewin ...

Lg.Nr. 26301 Technical data: - Saw blade diameter up to 400 mm - Cutting range with saw blade diameter 400 mm - at 90° to around 130 mm - Square 120 mm -flat 305 x 40 mm - or 240 x 85 mm - Mitre adjustable left + right 0 - 90 ° - at 45° to around 130 mm - flat 245 x 30 mm - or 180 x 70 mm - Feed speed of the saw blade - Infinitely adjustable 0 - 10 m/min - Saw blade cutting speed 13 / 26 m/min - Saw drive 400 V / 1.7 / 2.6 kW - Hydraulic drive 400 V / 0.75 kW - hydr. Material vise with hand crank for fine adjustment - Infinitely adjustable clamping pressure - 2 pieces of hydraulic retainers - Micro spray coolant device - Original discharge - roller conveyor with dimension stop 4000 mm - Roller conveyor feeder 2000 mm - Space requirement approx. W 900 x H 1800 x D 1050 mm - Weight approx. 950 kg

Panel saw Type: CLASS SI 400 Manufacturer: SCM Year: 2023 panel sizing capacity: 3200 × 3200 mm sliding carriage length: 3200 mm cutting width with parallel fence: 1270 mm maximum main saw blade diameter: 400 mm maximum cutting height at 90°: 140 mm maximum cutting height at 45°: 97 mm blade tilting: up to 45° main saw blade speed: 3000 / 4000 / 5000 rpm scoring saw blade speed: 8500 rpm main motor power: 7 kW scoring motor power: 1.3 kW machine weight: approx. 1070 kg EQUIPMENT independent scoring unit professional 3200 mm SCM sliding carriage eccentric clamp extendable frame for angular cuts parallel fence with micrometric adjustment direct main motor start dust extraction from main unit and overhead guard CE safety equipment Machine in good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

cutting diameter: 300 mm capacity 90 degrees: flat: 330 x 250 mm capacity 90 degrees: square: 250 x 250 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: flat: 260 x 200 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: flat: 170 x 170 mm band speed: 15 - 100 m/min dimensions of saw-band: 3650 x 27 x 0.9 mm Control: MEP CNC total power requirement: 2.2 kW weight: 1190 kg Fully automatic electro-hydraulic band saw, featuring additional operating modes: semi-automatic semi-automatic dynamic manual Description: - Robust, fully automatic electro-hydraulic band saw (INDUSTRIAL grade) MEP Direct control technology User interface with intuitive 10 touchscreen display Mechanical buttons for saw operating functions Guarantees reliable, simple, and intuitive operation Real-time monitoring of all cutting parameters Pivoting arm allows for convenient and safe operation Di ...

Martin T72A sliding table saw Hydraulic saw tilting with digital display at eye-level Hydraulic saw elevation with digital display at eye-level NC-controlled parallel fence Cross-cut fence with 2-point stops Scoring saw Manufacturer: MARTIN Type: T72A Comfort M-Nr.: V403081 Year: 1999 Control panel: Eye-level integrated in dust extraction cover, LCD displays showing saw height, -saw tilting angle, width/parallel fence positioning; scoring saw positioning Saw blade elevation: Hydraulic footpedal elevation 0 – 170 mm – with LCD display Saw blade tilting: Hydraulic footpedal tilting 0 – 46° – with LCD display Parallel fence Positioning: Handwheel positioning (frontsidemachine) – digital reading on central control Dust cover top: Electrically controlled elevation Manual sideward positioning for large objects sawing Cross-cut table: Aluminium swivelling table suitable for mitre cut ...

Martin T71 sliding table saw Manufacturer: Martin Type: T71 M-Nr.: 1982 Year: V123342 Mainsaw: max. ø450 mm, max Sawheight: 170 mm, Saw tilting: 0° – 46° Scorer: No RPM: 2.800/4.000/5.500 tpm Motor: 5,5 KW Sliding table: 1.900 mm Width: 1.250 mm Cross cutfence: Length measuring fence 2.200 – 3.300 mm with 2 -point system Cross cut table: with fixed positions for most used angles Dustextraction: Top: ø80 mm, Bottom: ø140 mm Weight: 1.200 KG

Martin T17 with tilting saw Manufacturer: Martin Type: T17 M-Nr.: V070521 Table Size: 1030 x 1050 mm. Table Heigt: 800mm Sliding Table: Yes Main saw: kW Speed: 2800 – 4000 – 5500 tpm Saw Blade Arbor: ø30 mm Saw Blades: ø450 Cutting Heigt: 147mm Blade Width: 0 – 45° Cutting Width: 1.050 mm Condition: Volledig functioneel

Omga Radial 600P3S Manufacturer: OMGA Type: Radial 600P3S M.Nr: 163864 Max. saw height: 90mm Max. saw length: 505mm Saw diameter: ø300mm Saw spindle: Ø 30mm Motor: 3 kW Speed: 3000 tpm Dust extraction: 80mm Weight: 190 kG Condition: functional

OMGA T50 350 Manufacturer: OMGA Type: T50 350 Year: 1993 M. Nr.: 222415 Max. saw height: 110 mm Max. saw length: 170 mm Saw diameter: ø350mm Saw spindle: ø30mm Motor: 2,2 kW Dust extraction: 80mm Incl. Ventilator Condition: Functionel tested

OMGA T50 350 Manufacturer: OMGA Type: T50 350 Year: 1993 M. Nr.: 222420 Max. saw height: 110 mm Max. saw length: 170 mm Saw diameter: ø350mm Saw spindle: ø30mm Motor: 2,2 kW Dust extraction: 80mm Incl. Ventilator Condition: Functionel tested

Rema DMMC sliding table saw Manufacturer: Rema Type: DMMC40 Year M. Nr: 1995 Main saw: max. max. ø400 mm, max Sawheight: 130 mm, Saw tilting: 0° – 45° Scorer: Yes RPM: 2.800/4.000/5.500 RPM Motor: 5,5 KW Sliding Table: 3.000 mm Parallel fence Positioning: 1.250 mm Cross cut fence: 2.200-3.300 mm 2-point fence Sidetable: with fixed positions for most used angles Dust extraction: Top: ø80 mm, Bottom: ø140 mm Weight: 900 KG

Martin T72A sliding table saw with electric saw elevation, -tilting, NC-controlled parallel fence, cross-cut fence with 2-point stops and mitre cross cut table Manufacturer: MARTIN Type: T72A M-Nr.: V238101 Year: 1997 Control panel: Eye-level integrated in dust extraction cover, electric saw elevation, -saw tilting, NC-controlled parallel fence positioning; Saw blade elevation: Electric controlled – digital reading on central control Saw blade tilting: Electric controlled – digital reading on central control Parallel fence Positioning: NC-controlled with digital reading on central display Sidetable: Mitre cross cut table, Cross cut fence: Aluminium: 2.200 mm, extendable upto 3.300 mm, with Digital 2-point stops Main saw: max. ø450 mm, bookthickness; 0-170 mm, tilting 0° – 46° RPM: 2.800/4.000/5.500 RPM Motor: 5,5 KW Sliding Table: 3.300 mm Parallel fence Positioning: 1.250 mm Du ...

Altendorf TKR45 Manufacturer: Altendorf Type: TKR45 Mach. Nr: 89-1-221 Year: 1989 saw length: 1350mm Sidetable: JA Saw width: 850mm saw height: 155mm Saw diameter (max): ø450 Saw spindle: ø30 Saw blade tilting: 0-45° Motor: 5,5 kW Speed: 3000/4000/5000 omw/m Weight: 910KG

Manufacturer: Harwi Type: 625-U Year: 1998 Swivelling: 0-45° Tilting: 0-45° Cutting heigth: 135mm Cutting length: 625mm High adjustment: 50mm Saw: Ø 400mm Saw arbor: Ø 30mm Motor: 3 kW Toerental: 2800 tpm Dust extraction: 2x 100mm

SCM SI400 Vanguard sliding table saw, 3-ax Control, Swivelling cross-cut table Manufacturer: SCM Type: SI400 Vanguard M-Nr.: Year: 2004 Touchscreen: 12″full-colour touchscreen, start-stop function in sliding table Control: 3-ax control, with control panel at eye -level 999 programm positions, 6 cuts per programm, help function with graphics, collision control Sliding Table: 3.200mm Saw Blades: Ø 250 – 400 mm Main saw: 5,5 kW, 3.000-4.000-5.000 rpm Cutting Heigt: 130 mm (saw diam.. 400 mm-90°, 92 mm- 45°.) Tilting: 0 – 45° Scorer: ø120 mm, 2-ax control Motor: 0.75 KW, 8.500 rpm Cutting Width: 1.500 mm Rip fence: anodised aluminium Cross-cut table: Vanguard cross-cut table with swiveling -50° upto 50° Cross-cut fence: Aluminium 2 digital stops with angular length correction, max 3.2 m

SCM SI15 with tilting saw Manufacturer: SCM Type: SI15F Year: M-Nr.: AB20182 Table Size: 1150 x 800 mm. Table Heigt: 800mm Sliding Table: Ja Main saw: 5,5 kW RPM: 3200 – 4500 – 6000 tpm Saw Blade Arbor: ø30 mm Saw Blades: ø350 Cutting Heigt: 115mm Blade tilting: 0 – 45° Cutting width: 850 mm Weight: 560KG

Graule ZS170N 3D – with NC controlled tilting & swivelling Manufacturer: Graule – with Tigerstop NC-control Type: ZS170N – with Tigerdrive control (tilting & swivelling) M-Nr.: 2014/78/27 Year: 2014 Graule ZS170N Motor: 3 kW Saw: ø420 mm As zaagblad: ø40 mm Cutting height: 170mm Swivelling: 45° – 90° – 25° Tilting: 0° – 45° Stroke: 450 mm – 90° 310 mm – 45 ° Saw: ø420 40 48 WZ Neg. (used) Machine stand: Inclusive

DeWalt 1600S Manufacturer: Dewalt Type: 1600S M. Nr: nn Max. Saw heigth: 100 mm Max. Saw length: 610 mm Saw: ø350 mm Saw spindle: Ø30 mm Motor: 3 kW Toerental: 2.650 rpm Dust extraction: ø100 mm Weight: 115 KG

Maggi 640 Junior Manufacturer: Maggi Type: 640 Year: 1994 Thickness: 125mm Stroke/sawlength: 450mm arial: 90mm Saw blade-outside diameter: ø400mm Saw blade-inner diameter: ø30mm Motor: 3 kW RPM: 2800 tpm Dust extraction: 2x 100mm

AC 700 Manufacturer: AC Type: 700 Motor: 4 kW Table dimensions: 740640mm Wheel: 700mm Saw height: 405 mm Max saw widt: 680mm Saw band length: 5.020 / 5.140 mm Band width: max. 40mm Tilting/blade: 45° Working height: 960 Dust extraction: ø120 mm Machine dimensions: 1.3506702170 Noise: 82,3 dB(A)

Striebig vertical panelsaw Compact 5207 C – 2005 Manufacturer: Striebig Type: 5207 Compact TRK M-Nr.: 30215 Year: 2005 Motor: 3.0 kW – 3 400V 50Hz Diameter: 250mm (ID 30 mm) Bore: 30 mm RPM: 5.250 rpm Dimensions: Max. saw length: 4.600 mm Max. saw width: 2.070 mm Max. saw depth: 1.958 mm Saw dept: 60 mm Machine length: 5.826 mm m Machine height: 2.838 mm Machine dept: 1.428 mm Product support bottom: Rolls Product support small work pieces: Yes Length measuring system: analog Saw turning: manuel Saw movement: manuel Machine support: Self-supporting A-frame Dust extraction: ø100 mm Saw position fixation: manual Equipped with: Emergency stop Motor brake