wood band saw used for sale

Speed Finishing Device Processing of rollers, including for the paper, printing and steel industries. Machine Type: Speed Finisher Machine No.: 721615 Technical data Workpiece diameter 80 – 500 mm Condition: Technical – very good / Optical – as good as new (Pictures partly similar)

Edge banding machine Type: G 480 Manufacturer: Felder Year: 2023 Counter: 34491 pre-milling unit pressure unit gluing unit trimming unit milling unit profile sanders surface sanders polishing unit separation solution injection Machine in good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: SCM Model: SCM Olimpic K560 — Composition T-ER2 (40) Year of Manufacture: 2019 Type of Machine: ABS Edgebanding Machine / Single-Sided Edgebander Technical Data: - Feed chain speed: 12–18 m/min - Panel thickness: 8–60 mm - Edge thickness in strips: 0.4–6 mm - Edge thickness in rolls: 0.4–3 mm - Maximum roll diameter: 800 mm - Spacing between panels: 600 mm - Minimum panel length (with minimum width 100 mm): 140 mm - Minimum panel width (with minimum length 210 mm): 95 mm - Working table height: 900 mm - Installed power: 23 + 28.5 kVA - Compressed air consumption: 450 NL/min - Dust extraction air consumption: 4,500 m3/h - Extraction outlet diameter: 250 mm Control System — Touch 7: - 7-inch colour touchscreen, 16:9 wide format; graphic representation of all operating groups; 60 modifiable work programmes; complete machine automation via PLC and encoder; gl ...

Sanding belt width: 200 mm Sanding belt length: 1800 mm Table support surface: 230 x 600 mm 5 grinding speeds by V-belt step pulley drive electr. Connection: 400 V, 0.55 kW

Additional title: Roboband / Logomatic, Capacity: 150 paletts / h, Power: 5,5 kW, Current: 10 A, Voltage: 400 Volt, Frequency: 50 Hz, Weight: 1700 kg

Table support or sanding length: 200 x 400 mm Sanding belt dimensions: 200 x approx. 1500 mm 2 belt speeds due to pole-switchable motor: 8/16 m/s Drive motor: 380 V, 1.8/2.2 kW Weight: 145 kg Space requirement: 1000 x 750 x 1100 mm

Edge banding machine Type: F 5 Manufacturer: Hebrock Year: 2024 Counter: 18 km pre-milling glue unit drip unit upper and lower milling corner cutter profile and surface cidlina polishing unit touch control Machine in very good condition,fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

Tightening banding machine with shrink tunnel Manufacturer: Kiener Type ASK 450 Kiener Tightening Banding Machine Auto Skinetta 450 with hinge chain belt and shrink tunnel with bar chain belt and hot air gun on the side and from above. Siemens Control Film width 40-450 mm single lane Foil thickness 25-60 My Thickness tolerance +/- 10 % Roll diameter up to film width 200 mm Outer diameter approx. 300 mm Up to film width 600 mm Outer diameter approx. 250 mm

HEMA UH 800 Year 1998 CE marking available Motor power 4 kW Continuously variable drive (Variomatic) Cutting speed: 370 - 1,850 m/min. (infinitely adjustable) Roller diameter: 800 mm max. cutting width: 780 mm Max. cutting height: 500 mm Saw blade length: 5,840 mm Saw blade width: 6 - 50 mm new APA roller guide (Panhans) top + bottom Blade tension indicator Driving device with parking brake Limit switch secured doors Engine brake Extraction connection: D 100 + 120 mm Dimensions: approx. 150 x 120 x 260 cm (W x D x H) Weight: approx. 800 kg Manufacturer information

Manufacturer: SCM Model: Minimax E10 Year of Manufacture: 2019 Type of Machine: Manual ABS Edge-Banding Machine for Curved Surfaces Version: CE Technical Data: - Thickness of pre-cut strip edging: 0.4–3 mm - Edging thickness with guillotine (edge height 80 mm): 0.4–1.5 mm - Edging thickness with guillotine (edge height 50 mm): 0.4–2.5 mm - Edging thickness with guillotine (edge height 45 mm): 0.4–3 mm - Edge height: 10–84 mm - Panel thickness: 8–80 mm - Minimum panel width: 50 mm - Minimum applicable edging length: 210 mm - Minimum internal radius with 0.4 mm edging, concave surface: 25 mm - Minimum internal radius with 0.4 mm edging, convex surface: 5 mm - Feed speeds: 4 / 8 m/min - Working temperature: 140–220 degrees C - Installed power: 3.5 kW / 380 V / 50 Hz - Machine body dimensions: 1,000 x 740 x 1,100 mm (height) - Roll-holder plate diameter: 520 mm - Compress ...

A single-sided IMA edge processing machine for sizing, edge bonding and post-processing of wood panels is available. Min. workpiece dimensions X/Y/Z: 150mm/130mm/16mm, max. workpiece dimensions X/Y/Z: 2350mm/800mm/40mm, max. workpiece weight: 50kg, workpiece angle: 90°, material: particleboard/MDF, working height: 960mm. This is a complete system with conveying and peripheral units. Documentation available. An on-site inspection is possible.

cutting diameter: 360 mm saw band length: 6.300 mm cutting width: 700 mm table height: 800 mm total power requirement: 14 kW weight of the machine ca.: 5,8 t dimensions of the machine ca.: m Automatic Horizontal Band Saw Cutting Capacity at 90° (Round): Ø 360 mm Cutting Capacity at 90° (Rectangular): 700 x 340 mm Cutting Capacity at 75° Mitre (Left & Right): Ø 340 mm / 650 x 340 mm Cutting Capacity at 60° Mitre (Left & Right): Ø 340 mm / 600 x 340 mm Cutting Capacity at 45° Mitre (Left & Right): Ø 340 mm / 400 x 340 mm Maximum Cutting Diameter: 360 mm Maximum Cutting Width: 700 mm Maximum Cutting Height: 340 mm Minimum Cut-Off Length: 35 mm Minimum Workpiece Size: 10 x 10 x 10 mm Remnant Length (Manual): from 10 mm Remnant Length (Automatic): from 160 mm Blade Tension: 85 bar Coolant Tank Capacity: 150 l Blade Speed: 19 – 130 m/min Main Drive Motor: 5.5 kW Hydraulic Pump Motor ...

Table size: 3000 x 1000 mm Drive power: 4.0 kW Sanding belt speed: 8 – 25 m/s Table height adjustment: 0 – 630 mm Sanding belt lengths: 9000 mm Space requirement: 4750 x 2300 mm Machine height: approx. 2500 mm Compressed air: 6 bar Features: -Two sanding belts for pre-sanding and finishing sanding -Triangle guide of the straps for a clear view and freedom of movement -Pneumatic abrasive belt clamping with ball guides -Adjustable belt speed -Tilting of the sanding belts up to 90° -Self-centering abrasive belt -Pneumatically opening belt channels -Manual workpiece movement in 3-axis -Each axle with brake or lock -Vacuum tension for the workpieces

MACHINE 1 - Panel saw - Manufacturer/Type: Homag HPV 11 - Model: HPV11/X/43/22 - Year of manufacture: 1999 - Made in Germany - Equipment: 3 stockyards with 25 panels each, panel dimension max 2,100 x 4,100 mm, up to 6 panels can be cut simultaneously, automatically height-adjustable clearing table - Special features: cut layout optimisation for optimal utilisation of panel material, low waste - Electrical: 400 V, 50 Hz, 3 phase + N, 80 A, 80 A fuse, 24 V control voltage - Length: 26 m - Width: 8.5 m - Height: 2.5 m - Equipped with lifting tables and Liftomat MACHINE 2 - Edge banding machine - Manufacturer/Type: Homag Optimat KL 78/A20 - Model: KL 78/A20/S2 - Year of manufacture: 1999 - Made in Germany - Equipment: panel formatting milling cutter, bevel and rounding milling cutter, groove saw, edge draw blade - Function: edge banding, one-sided - Work piece dimensions - length: min 120 ...

-Band length 272cm -Band width: 85cm -Table width 92cm -380 volts

Manufacturer: FORMAT 4 Model: Tempora 60.06 GlueBox X-motion Year: 2023 Condition: Used Stock number: 9353 Binding height: 10-60 mm Edge thickness: 0.4-3 mm Feed speed: 10 m/min Minimum. Material length: 140 mm

width of the strips: 75 mm band length: 2000 mm band speed: ~ 1800 m/min total power requirement: 3 kW weight of the machine ca.: 150 kg dimensions of the machine ca.: 0,511 m No. 4904: Belt grinding machine PRIMAT, mod. BSM 75 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 320 mm saw band length: 3400 x 27 x 0.9 mm capacity 90 degrees: flat: 320 x 400 mm capacity 45 degrees: flat: LI 320 x 280 mm capacity 45 degrees: flat: RE 320 x 260 mm capacity 60 degrees: flat: RE 320 x 140 mm band speed: 35 + 70 m/min work height max.: 930 mm voltage: 400 V total power requirement: 2.67 kW weight: 950 + 250 kg range L-W-H: - mm well-maintained condition () current new price incl. accessories ~ 40.000 Euro special price on request - in checked conditions - machinevideo - https://www.youtube.com/watch?v=AHgMDxAcpgE Equipment: - electro-hydraulic vertical mitre bandsaw - with large cutting range and small footprint - Robust material support table - miter cuts are carried out fully automatically electro-hydraulic miter adjustment left right - Up to 99 cutting programs - Central operation of all machine functions from the front - Loading also possible ...

roll diameter: 420 mm throat: 405 mm workpiece height: 380 mm cutting speed: 16 - 2200 m/min table surface area: 615 x 615 mm saw band length: 3450/3650x6-20x0,9 mm work height max.: 955 mm voltage: 380 V total power requirement: 3.0 kW weight of the machine ca.: 470 kg dimensions of the machine ca.: 1250 x 1000 x 2100 mm From a training workshop Good condition () Features: - Robust, vertical band saw machine - Frequency-controlled, infinitely variable belt drive - Belt guide height adjustment with hand wheel - IDEAL belt welding system, with shears and grinding motor - Swivel table 15°/45° - Machine base - Swiveling machine lamp The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 420 mm throat: 400 mm workpiece height: 285 mm cutting speed: 15 - 1400 m/min table surface area: 500 x 500 mm saw band length: 3200-3400x6-20x0,9 mm work height max.: 955 mm voltage: 380 V total power requirement: 1.5 kW weight of the machine ca.: 470 kg dimensions of the machine ca.: 950 x 750 x 1820 mm Furnishing: - robust, vertical - band saw machine - Frequency-controlled, infinitely variable belt drive - Belt guide height adjustment with hand wheel - IDEAL strip welding machine model BSO, with shears and grinding motor - swiveling table 15°/45° - Machine base The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 150 mm band length: 2280 mm band speed: 22 m/sec table-size: 700 x 350 mm roll diameter: 140 / 80 mm motor speeds:: 2880 1/min range L-W-H: 1300 x 800 x 1500 mm total power requirement: 3,0 kW weight of the machine ca.: 250 kg Horizontal belt grinder - Small, flexible all-rounder - Solid gray cast iron unit - long-lasting, good grinding results - Motorized tape oscillation approx. 10mm - Pneumatic belt tension - Small table on the pulley for grinding radii and shapes - The entire sanding belt can be used thanks to the height-adjustable work table - Including angle and miter fence Special equipment: - swiveling grinding unit 90 - 135 degrees - Support table on the pulley The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 150 mm band length: 2.000 mm band speed: U/min motor: 400 V loading area: 450 x 160 mm total power requirement: 4,0 kW dimensions of the machine ca.: 1,10 x 0,70 x 1,15 m - Serial-No.: 200.184 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 320 mm throat: 310 mm workpiece height: 230 mm table-size: 505 x 505 mm cutting speed: 12 - 375 m/min turning speeds: 39 - 1230 U/min saw band length: 2460 - 2620 mm voltage: 400 V total power requirement: 1,3 kW weight of the machine ca.: 420 kg dimensions of the machine ca.: 0,80 x 0,80 x 1,65 m welding equipment: IDEAL air blow equipment: - serial-no.: 22600-77/14 - with stepless feed - welding equipment IDEAL - grinding wheel - machine lamp The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

rotary table dia.: . mm max. dia. of grinding wheel: 300 mm with manual ongoing: . 0 manually feed: . 0 1,5 KW The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

rotary table dia.: . mm max. dia. of grinding wheel: 260 mm with manual ongoing: . 0 manually feed: . 0 1,5 KW The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

rotary table dia.: . mm max. dia. of grinding wheel: 300 mm with manual ongoing: . 0 manually feed: . 0 1,5 KW The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

rotary table dia.: . mm max. dia. of grinding wheel: . mm with manual ongoing: . 0 manually feed: . 0 0.4 KW The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. saw length: 6,000 mm Max. saw blade diameter: 550 mm Windows-based control system E 555 with touch display Swivel inside and outside 22.5° - 90° - 140° Tilt the angles between 45 and 90 degrees Digital Angle Displays Moving roller conveyor Chip extraction on both units Minimum quantity spraying device Label Printers Machine is loaded freely

Offer 25416 Technical data: - Cutting range at 90° around 260 mm - flat 410 x 200 mm - Mitre adjustable left + right 90 to 30 ° - Schnittb. at 45° Re + Li round 220 mm - flat 230 x 300 mm - Material support height approx. 620 mm - Saw blade dimensions 3660 x 27 x 0.9 mm - Cutting speed 17 - 106 m/min - hydr. Lifting – lowering the saw frame - Upper stroke limit of the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - hydr. Material vise - Saw blade cleaning brush - Micro spray coolant device - Total drive power 400 V / 1.9 kW - Roller conveyor 3300 mm - Space requirement with base frame W 5200 x H 1600 x D 2000 mm - Weight with base 1900 kg

Pre-milling unit: yes; Pre-milling unit material removal: 0 - 2 mm; plastic edges: 0,4 - 3 mm; solid wood edges: 0,5 - 5 mm; Workpiece thickness: 8 - 50 mm; Minimum length of workpiece: 120 mm; Min. work piece width: 110 mm; Anti-adhesive spraying unit: yes; Edge preheating device: yes / with ceramic infrared lamp; Bonding unit: granulat / Glue container quick-change kit; Jack knife: yes; Flush trimming unit: yes; Corner copy unit: yes; Flush radius milling unit: yes; Radius scraper unit: yes; Area scraper unit: yes; Buffing unit: yes; Cleaning spray unit: yes; motor power: 5 kW; machine length: 3774mm; machine width: 1546 mm; machine height: 1337mm; weight: 842 kg; Top equipment for high productivity with low space requirements! Intuitive operation with the eye-S control and 10 large touchscreen: - HMI Maestro Active Edge - Graphic display of all processing units ...

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 11100 € : 213.12 € : Schwenkrahmen : 3660x27x0,9 mm : 20-100 m/min : 320 mm : 300 mm : 320x300 mm : 640 mm : 0.37 kW : 2.2 kW : 0.12 kW : 1900 mm : 850 mm : 1300 mm : 770 kg Roller material feed with manual adjustable length stop with limit switch blade brush control panel height adjustment bar with limit switch hydromechanical blade tension inverter hydraulic vice coolant pump saw blade security switch 1,2 meter roller table users manual in GERMAN or ENGLISCH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 29800 € : 569.18 € : Doppelsäulenführung : 5400x41x1,3 mm : 20-100 m/min : 450 mm : 425 mm : 695 x 425 mm : rund 430 mm, quadrat 425 : rund 320 mm, quadrat 290 : 690 mm : 0.55 kW : 4 kW : 0.12 kW : 3090 mm : 1200 mm : 1940 mm : 1630 kg double linear guides hydraulic-mechanical bandtension saw bandbrush infinitely variable cutting speed sensitive cut regulation bi-metal saw band 41 coolant device thermal overload protection heavy duty gear optical height adjustment 3 ° inclined band hydraulic clamping of the vice user manual in GERMAN or ENGLISH OPTIONS: hydraulic vertical clamping micro cooling unit chip conveyer laser cutting line The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 18184 Technical data: - Saw blade diameter up to approx. 400 mm - Saw blade speed 2800 rpm - Cutting range approx. - at 90° around 140 mm - or flat 170 x 140 mm - Mitre adjustable left + right 45 - 90 - 30 ° - Pneum. Saw blade feed - Pneum. Quick-release vise - Pneumatic connection - Original machine base - Feed roller conveyor 3000 mm - Discharge roller conveyor with dimension stop 6000 mm - Drive 400 V / 2.2 kW - Space requirement approx. W 650 x H 1550 x D 1000 mm - Weight machine approx. 150 kg

: neu : 2024 : 6254 : prompt, Zwischenverkauf v : Italien : 15040 € : 288.77 € : 1 : Doppelsäulenführung : 3270x27x0,9 mm : 40/80 m/min : 300 mm : 300 mm : 350x260 mm : rund 210 mm, quadrat 210 : rund 110 mm, quadrat 110 : 830 mm : 1.5 kW : 1500 mm : 1600 mm : 1900 mm : 590 kg hydraulicvice INCL. ADJUSTABLE CLAMPING PRESSURE saw beam moves up and down by hydraulic cylinder fast descent automatic fast up/down conrolled by feeler pin adjustable pressure according to section and type of material double safety buton for cycle start 2 speeds coolant equipment _CUTTING CYCLE_ Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up, Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid, Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected. Manufacturer warranty until 31.12.2026 ...

Banderolierer Akebono OB 301 N; cleaned and tested; Large roll magazine; Bandwidth 29mm; Product size 380x200mm; Foot switch. Banding machine Akebono OB 301 N; cleaned and checked; Big Roll Magazine; band width 29mm; package size 380x200; foot switch.

roll diameter: - mm throat: 1000 mm workpiece height: 350 mm total power requirement: 3 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2 x 1 x 2 m No. 4428 Horizontal band saw SAMUR S-1000 V Cutting height 350 mm Cutting speed 20-800 mm Blade length : 4,550 mm. Blade width : 4 to 15 mm. Infinitely variable cutting speed : 23-711 m / min Elektromot r380 V Table dimensions: 610 x 610 mm Table extension left Welding device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: ? mm throat: 280 mm workpiece height: ? mm total power requirement: ? kW weight of the machine ca.: t dimensions of the machine ca.: m No. 3849 Vertical bandsaw THIEL Thiel 17 Table 500 x 590 Clearance approx. 280 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 75 mm band length: 2000 mm band speed: 36 m/min total power requirement: 4 kW weight of the machine ca.: 82 kg dimensions of the machine ca.: 1000 x 500 x 1150 mm Belt sander Metallkraft MBSM 75-240-1, article no.: 3923272 For sanding surfaces, edges and rounding off Description: - Powerful motors and vibration-free operation for the best sanding results - Quick sanding belt change in seconds thanks to quick-release system - Large surface sanding area thanks to fold-away upper sanding belt cover - Continuous sanding surface after removal of attachments enables sanding of long workpieces too - Can be used with and without extraction - One extraction nozzle on the spark box and one on the rear belt roller - Simple adjustment of the belt run via adjusting screw - Automatic retensioning of the sanding belt thanks to spring-loaded belt tensioning system - Infinitely tilta ...

width of the strips: 75 mm band length: 2000 mm band speed: 30 m/s total power requirement: 3,0 kW weight of the machine ca.: 70 kg dimensions of the machine ca.: 610 x 944 x 1419 mm Mobile belt sander PASOVEC 75 RUNNER Pasovec 75 RUNNER - the special belt grinder developed for Surface grinding applications, especially for grinding weld seams in the material surface. Pasovec 75 Runner removes unwanted layers that occur when Sheet metal rolling or after sheet metal cutting with plasma or oxygen arise. Innovative, multifunctional machine Stepless adjustment of the grinding depth Equipped with a dead mans switch Station for flat grinding small workpieces Low running costs The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 150 mm band length: 2280 mm revolutions per minute: 2880 U/min roll diameter: 140 / 80 mm table-size: 700 x 350 mm engine output: 3.0 kW weight: 250 kg range L-W-H: 1300 x 800 x 1500 mm MADE IN GERMANY - Machinevideo - https://www.youtube.com/watch?v=l-XFPai2BAA Furnishing : - Horizontal belt grinder - Small, flexible all-rounder - Solid gray cast iron unit - long-lasting, good grinding results - Motorized belt oscillation approx. 10 mm - Pneumatic belt tension - Small table on the pulley for grinding radii and shapes - The entire sanding belt can be used thanks to the height-adjustable work table - Including angle and miter fence Special equipment included: - swiveling grinding unit 90 - 135 degrees - Support table on the pulley The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 100 mm band length: 2000 mm band speed: 15/30 m/s total power requirement: 3,0 kW weight of the machine ca.: 159 kg dimensions of the machine ca.: 768 x 1185 x 1417 mm Mobile belt sander PASOVEC 75 RUNNER Pasovec 75 RUNNER - the special belt grinder developed for Surface grinding applications, especially for grinding weld seams in the material surface. Pasovec 75 Runner removes unwanted layers that occur when Sheet metal rolling or after sheet metal cutting with plasma or oxygen arise. Innovative, multifunctional machine Stepless adjustment of the grinding depth Equipped with a dead mans switch Station for flat grinding small workpieces Low running costs The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 75.0 mm band length: 2000 mm band speed: 29.0 m/sek grinding width: 460 x 75 Plantisch mm Dust suction hood: 100 mm total power requirement: 3.0 kW 100% ED weight of the machine ca.: 66.0 kg range L-W-H: 1080 x 440 x 1000 mm Description : - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Sanding belt K 80 - Hinged protective screen - Sanding ...

: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 2160 € : 75 mm : 75 x 2000 mm : 200 x 75 mm : 530 mm : 3 kW : 35 m/s : 475 - 1240 mm : 1100 mm : 550 mm : 1035 mm : 100 kg Industrial-belt grinding machine Powerful motor Enclosed grinding head ensure a very effective extraction system Thermal overload protection Emergency stop Electronic motor brake Adjustable support Eye protection Stepless adjustable working height Self adjusting belt tensioner Operating manual in German or English ALTERNATIVE Version TAS 75X/2 with 2 speeds € 2.530,00 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 14200 € : 272.64 € : Schwenkrahmen : 4160x34x1,1 mm : 20-100 m/min : 320 mm : 320 mm : 610x320 mm : rund 260 mm, quadrat 225 : rund 320 mm, quadrat 320 : rund 320 mm, quadrat 320 : 740 mm : 0.37 kW : 2.2 kW : 0.12 kW : 2100 mm : 1200 mm : 1350 mm : 1150 kg : rund 320 mm, quadrat 320 blade brush control panel height adjustment by switch hydromechanical belt tension inverter material limitation shaft cooling equipment saw blade security switch gearbox adjustable graduation scale for miter cuts 1,2 meter roller conveyor hydraulic lifting of the saw frame user manualin GERMAN or ENGLISH OPTION: hydraulic top clamping The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 33700 € : 643.67 € : Doppelsäulenführung : 6300 x 41 x 1,3 mm : 15 - 120 m/min : 440 mm : 440 mm : 640 x 440 mm : rund 440 mm, rechteck 400 : rund 250 mm, rechteck 250 : rund 390 mm, rechteck 390 : 860 mm : 1.1 kW : 4 kW : 0.12 kW : 3150 mm : 1850 mm : 2115 mm : 2050 kg 3° inclined sawing band blade brush control panel hydraulic vice hydromechanical blade tension inverter linear way height adjustment pressure adjustment coolant pump saw blade security switch gearbox syncronized movement of sawing arm/clamping jaw hydraulic uplift of sawing frame user manual in GERMAN or ENGLISH ALTERNATIV: Version BMSY 440 CDGH NC with automatic mitre adjustment by NC control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 104600 € : 1976.94 € : Doppelsäulenführung : 10430x54x1,6 mm : 20-100 m/min : 750 mm : 1300x700 mm : rechteck 850 x 750 mm : rechteck 570 x 750 mm : rechteck 850 x 750 mm : 930 mm : 4 kW : 11 kW : 0.12 kW : 5500 mm : 2280 mm : 3400 mm : 8500 kg Hydraulic vice Digital display for angle indication Hydraulic saw arm clamping Manual saw arm rotation Continuously adjustable saw arm lowering speed Automatic saw frame lifting after cutting Sensitive cutting pressure regulation depending on material properties Hydromechanical blade tension readable via pressure gauge Mobile control panel Heavy-duty, helical-toothed conical gear Driven chip brush Blade guidance via carbide plates and rollers Automatic blade breakage protection Coolant system Hydraulic saw frame lifting Operating instructions in GERMAN or ENGLISH OPTIONS: Roller tables and band s ...

: neu : ca. 4 Monate ab Auftragse : Türkei : 82900 € : 1566.81 € : Doppelsäulenführung : 8400x54x1,6 mm : 20-100 m/min : 650 mm : 1000 x 600 mm : rechteck 660 x 600 mm : rechteck 440 x 600 mm : rechteck 660 x 600 mm : 880 mm : 4 kW : 7.5 kW : 0.12 kW : 4400 mm : 2270 mm : 2660 mm : 6520 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH The data for this ad was crea ...

: neu : ca. 4 Monate ab Auftragse : Türkei : 27700 € : 529.07 € : Doppelsäulenführung : 6000x41x1,3 mm : 20-100 m/min : 560 mm : 560 mm : 750x560 mm : rund 410 mm, quadrat 410 : 590 mm : 1.1 kW : 4 kW : 0.12 kW : 3400 mm : 1000 mm : 2050 mm : 2045 kg 2° inclined band linear guides control panel material limit shaft coolant pump 1200 mm roller table hydraulic vice hydromechanic band tensioning inverter presser adjustment band brush optical height adjustment security switch operating manual in Englisch OPTION: turn table for mitre cuts hydraulic top clamping from above micro cooling unit laser cutting line The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2000 : 6253 : prompt, Zwischenverkauf v : 1900 € : 1 : Schwenkrahmen : 2480 x 0,9 x 27 mm : 45 / 90 m/min : 225 mm : 180 x 245 mm : rund 100 mm, 100 x 100 mm : rund 160 mm, 160 x 160 mm : 935 mm : 1.1 kW : 1500 mm : 700 mm : 1400 mm : 225 kg Downfeed with damper cylinder and manual valve Coolant equipment Vice with fast clamping lever Roller table 2000 mm with manual gauge 3 pcs. spare bands Operating manual with EC conformity declaration OPTIONS: Further roller tables and band saw blades on request BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day  ...

: neu : ca. 4 Monate ab Auftragse : Türkei : 32000 € : 611.2 € : Doppelsäulenführung : 5000 x 34 x 1,1 mm mm : 20 - 120 m/min : 330 mm : 330 mm : 350 x 330 mm : 845 mm : 1.1 kW : 3 kW : 0.12 kW : 2815 mm : 1935 mm : 1855 mm : 2560 kg Servo feed with 700 mm stroke Cutting length up to 9,999 mm (multiple feeds) Omron touchscreen, 50 different cutting lengths and 30 programs can be saved Linear guide 41 mm saw blade Control panel Hydraulic vice Hydromechanical blade tension Heavy duty gearbox Coolant device Sensitive pressure Inverter for stepless blade speed Chip brush Optical height adjustment Chip conveyor Operating instructions in GERMAN or ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.