wood band saw used for sale

Rated power: up to 3000 kg/h Electrical connection: 3.5 kW 400V 50Hz (3 phases) Electrical fuse: 16 A traege Dimensions: Laenge: 3 720 mm Width: 1 730 mm Height: 2 110 mm output or drop-in height: 1 430 mm Width: 660 mm 220 - 440 mm Application shoehe (infinitely adjustable): 10 - 40 mm Weight: 2 200 kg Material: 1.4301 / AISI 304 Juice yield: up to 80% (depending on fruit type) Band speed: 1.2 - 4.5 m/min Contact time: 1.4 - 4.2 m inWater consumption for Cleaning: 10 l/min (in continuous operation cleaner) Connection: Connection for waste water: 75 mm Connection for juice drain: DN 25 High juice drain: 130 mm Hoehe sewage drain: 50 mm Hoehe Marce ejection: 810 mm usable for core and stone fruit Supplied: high-pressure cleaner, compressor Incl. New machine - best condition

Saw blade diameter: 350 mm cutting capacity at 90 ° round: 90 mm cutting capacity at 90 ° square: 160 x 70 mm section in MITRE at 45 ° rectangle: 120 x 60 / 60 x 80 mm cutting speed: 30 m / min drive motor: 1.1 kW space: 1000 x 1250 x 1380 mm weight: 795 kg

Band dimensions: 150 x 2000 mm speed: 14.5 / 29 m / sec. Contact plate: 200 mm / 155 mm plan grinding table diameter: 460 x 150 mm Extractor connection: 100 mm in diameter engine power: 4 kW

Type AKV 88 F Without glue tank Max. edge thickness 3 mm Max workpiece height 50 mm Feed speed : 0-7 m/min (0,25kW) Power consumption 3,2 kW Work table height 890 mm Made in Germany 1996 y. Transport dimensions 1360x680x1220 mm Weight 150 kg

Cutting capacity round 90°: 170 mm cutting capacity flat 90°: 140 x 210 mm cutting capacity around 45°: 125 mm section flat 45°: 100 x 125 mm working height: 890 mm band saw blade dimensions: 2080 x 20 x 0,9 mm cutting speed: 20-90 m / min coolant pump S1 100%: 100 W power: 0.75 of kW machine dimensions (L x D x H): 1250 x 540 x 1600 mm weight approx.: 157 kg

Band dimensions: 75 x 2,000 mm speed: 14.5 / 29 m / sec. Contact plate ø x B: 200 / 80 mm plan grinding table: 460 x 75 mm suction connection Ø: 100 mm motor power output S1 100%: 2.4 / 3.0 kW absorbed motor power S6 40%: 3.0 / 4.0 of kW voltage: 400V dimensions (L x W x H): 1080 x 440 x 1000 mm weight about: 67 kg

Saw blade diameter: 370 mm cutting capacity at 90°: 115 mm cutting capacity at 45°: 115 mm drive motor: 380 V, 4.5 kW space: 1000 x 1200/2200 x 1500 mm weight: approx. 900 kg

Pester Straff-banding machine type Pewo mat 450SN Bundle Packers pester PEWO-Pack 450 SN Stretchwrapper -Modified in 2016. -Memorized (max. mm): - Insert length 300, - rack width 540, - rack 250, - seal width 450, - power: 24 cycles/min. -With shrink tunnel PEWO-therm II, passage height 130 mm, machine is with new hardware and software Mitsubishi operation via touch panel and new paint in silver offers. Infeed conveyor with Stacker in the direction of the production flow with 90 ° high thrust

Trenbandsäge Primultini 1100 with mechanization before and after the saw: -Task roller conveyor -Tilt table -Cross conveyor -Feed belt conveyor -Auszugsföderer -Drop link right -Repatriation -Board cross conveyor

High-quality construction Drive roller is crowned (thus the sanding belt centered automatically centered on the role) and fully Vulcanized for longest life and best smoothness Tool-less and allow fast, easy change of the sanding belt Stepless height adjustment for optimal setup of the belt sander on the user Free adjustable metal fence to the optimal and safe guide workpieces during use of the large plan grinding area Speed design optimized for burning of the workpiece during the machining can be excluded as far as possible Models with fume control system equipped with robust and flexible suction hose Motor protection switch with CEE collar Steckvorrichtung incl. phase inverter 5 year warranty on the motor 1 year warranty on the belt sander Strap length: 2000 mm Band width 75 mm Plan grinding range 600 mm Speed 15/30 m/s RAL 9007 colour Motor three-phase 400 V 3.0/3,75 kW Suction capa ...

Vertical band aege KOeLLE ST105, table 950/900 mm, v= 15 - 2300 m/min - table must be overhauled - see pictures

Special price for stock goods! Only while stocks last! Belt dimensions: 75 x 2000 mm Belt speed: 29 m/sec. Contact disc Ø x W: 200 / 80 mm Face grinding table: 460 x 75 mm Suction connection Ø: 100 mm Motor output power S1 100%: 3.0 kW Motor input power S6 40%: 4.0 kW Voltage: 400 V Length: 1080 mm Width: 440 mm Height: 1000 mm Weight approx.: 66 kg Characteristics: - Good grinding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous face grinding surface for optimal grinding of long workpieces - Constant belt tension due to spring-loaded clamping device - Universally applicable for grinding edges, surfaces and cylindrical grinding - Including quick clamping system for fast belt changes - Easy adjustment of the parallel belt run by means of adjustment screw - Graphite coating on the face grinding surface increa ...

Sollas SB250 stretchbander for cartons with 1000mm x 150mm (L x W) exit conveyor, output up to 25 packs per minute. Carton size range min. 60 x 35 x 10 mm (LxWxH), max. 400 x 450 x 200 mm Foil width 100 to 250mm Foil roll diameter max. 280mm Compressed air 4-6 bar

Manufacturer _ BONGIOANNI Model_ 1300 Features_ ARTIGLIO Carriage with 5 hydraulic clamping; Hydraulic Advancing; Chain Loading at 4 ways with hydraulic arms; Unloading Rollers System; Reverse Feeding Chain; Grinder manufactured by Vollmer.

Skinetta ASK 450 Penalty Banding Machine Machine Purpose The tightening banding machines of the SKINETTA series serve the purpose of tightening individual products or several individual products with polyethylene film. banding (wrapping). In contrast to shrinking machines, the wrapping film is pulled tightly around the container before sealing. This streamlining is the main advantage of the procedure. The result is up to 20% less film consumption. A special advantage of the patented SKINETTA tightening system is the infinitely variable, fine dosing. The sealing (welding) of the film takes place in the smallest of spaces and a clean sealing seam with very small protrusions is created. By connecting a SKINETTAther or SKINETTAshrink heat cover and using a correspondingly wide film, the film protrusion protruding beyond the container can be shrunk laterally. This pre-singing m ...

Technical description: -Trimming unit -Milling unit -Fine trimming unit -Scraper -Buffing unit

Cutting speed:-3 gearbox stages + Variogetriebe 15-940 m / min -Overdrive 2350 m / min Plate B x T CA 700 x 600 mm RADIUS approx. 480 mm Cutting height Max approx. 360 mm Space requirements, B x T x H approx. 1.1 x 0.8 m estimated approx. weight 1 to Equipment:-rubber of the two rollers is in good condition -IDEAL band sealer - table Tiltable

Edgebander Symbel Coronel; good condition; cleaned and checked, installed new bearings; Working width 60 mm; 2-roll; suitable for cold glue; Glue tank height-adjustable. Edge gluing machine Symbel Coronel; good condition; cleaned and checked; New bearings; working width 60mm; two rollers; used for cold glue; Glue reservoir adjustable in hight.

Transit Ultrasonic Banderolier ATS US 2000 AB TR; good condition; maintained and checked by ATS Customer Service in Heidelberg; Frame 360x260mm; Bandwidth 15mm. Transit ultra sonic banding machine ATS US 2000 AB TR; good condition; cleaned and checked by the support of ATS Heidelberg; frame 360x260mm; band width 15mm.

Conveyor belt BVM; cleaned and tested; Width 1000mm; Length 2850mm; Self-management; Speed adjustable. Tape conveyor BVM 1000x2850; cleaned and checked; width 1000mm; lenght 2850mm; speed control; automatic control.

Dough pre-portioner 3 rolls dough strip former from Rijkaart with 45cm tape and roll width with large hopper.Machine is mobile on rollers, 400 volt connection.Machine is immediately available in the warehouse. 1x Roller 45cm wide large funnel on large rolls with a set-up completely made of stainless steel

Z-band, stainless steel frame height 2.80m length 3.20 m

IMA BFB MS300A collator and stretch bander for cartons Carton Size range: minimum 65 x 20 x 12 mm, max. 160 x 95 x 95 mm Bundle size range: minimum 65 x 80 x 30 mm, max. 180 x 320 x 160-210 mm (push-in width x depth x height) Maximum reel diameter 300mm, reel core diameter 70-76mm Includes discharge rake to remove bundles from the machine (prevents heating the product) Siemens S7-300 PLC with UniOP HMI Capacity up to 40 bundles per minute 6 bar compressed air Footprint 2865 x 1265mm approx. x 1945mm high Weight approx 1500kg.

Used Vertical band saw, make MÖSSNER, good, electrically connected Model SSF/500 Masch.-No. 11502 Built in 1963 Technical data: Cut: - 3 gear stages + Vario gearbox 15 - 940 m/min - Fast response 2350 m/min Support table B x T approx. 700 x 600 mm Discharge approx. 480 mm Cutting height max. approx. 360 mm Space requirement , W x T x H approx. 1.1 x 0.8 m Weight estimated approx. 1 to Facilities: Rubbering of both rollers is in good condition IDEAL Tape Welding Machine Table tilted

The PEWOPACK 450 is an electronically/pneumatically controlled tightening barrier insulating machine for the production of single and multi-piece containers. It pops up the products in boxes and welds them into a thermal foil. Power max:60 boxes/min Slide type: PE Ptsegq Film width 50 - 450 mm Film thickness 0.025-0.100 mm Roll diameter max. 300 mm

bundle sizes from 30 x 12 x 50mm up to 350 x 200 x 200mm (minimum individual carton size 15 x 12 x 50mm), output up to 50 bundles per minute. Includes infeed and outfeed conveyors.

Technical data: - Edge grinding machine for edge processing on - welded boxes, cabinets, safes, etc. - Control SIEMENS for clocks + oscillation - max. grinding height approx. 1200 mm - Grinding belt dimension 100 x 2240 mm - Grinding belt speed 12 + 24 m/s - Grinding unit swivelling - 2 magnetic clamping plates - Mot. Grinding dust extraction - Pneumatic connection 6 bar - Drive 400 V - Space requirement approx. W 2500 x H 2000 x D 2000 mm - Weight approx. 1500 kg

Technical data: - Cutting range at 90° around 260 mm - flat 450 x 240 mm - Cutting range at 45° around 230 mm - flat 240 x 200 mm - Machine is mounted on original turnstile - Saw band dimension 3660 x 25 x 0.9 mm - Cutting speeds 20 / 35 / 50 / 70 m/min - Hydr. lifting + lowering the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 0.8 kW - Coolant device - Space requirement approx. W 2100 x H 1200 x D 1000 mm - Weight approx. 500 kg

IMA FILLING MACHINE FOR CAPSULES, MODEL HERMETICA 100 Year of construction: 2015 (revision in 2022) Automatic machine for sealing filled capsules. Ideal for the production of liquid or moisture-sensitive products (e.g. probiotics, oils, CBD, collagen, vitamins). Provides tamper-evident protection, improves capsule integrity, and allows the use of liquid, semi-solid, or moisture-sensitive products. Compliant with FDA/GMP, IQ/OQ available. CHARACTERISTICS • Structure: Stainless steel, GMP design • Control system: Touch screen HMI + PLC PRODUCTION • Output: up to 100,000 capsules/h • Capsule material: hard gelatin, HPMC • Capsule sizes: from 4 to 00 (optionally 000)

gebr. As good as new precision band saw HEMA UH 800 Year 2018 Motor power 4 kW Stepless drive (frequency-controlled) Cutting speed: 400 – 2,000 m/min. (infinitely adjustable) Roller diameter: 800 mm max. cutting width: 780 mm Max. cutting height: 480 mm Saw blade length: 5,600 mm HEMA top + bottom roller guide Precision table swivel device with handwheel and rack Miter Gate Valve Digital blade clamping display Hour meter Engine brake EMERGENCY STOP Limit switch secured doors Extraction connection: D 100 + 120 mm Dimensions: approx. 149 x 90 x 246 cm (W x D x H) Weight: approx. 800 kg Current new price: approx. 30,000 EUR net! Few operating hours Therefore, absolutely mint condition!