127,185 used machines on RESALE, but how to find them? Machine Search
An automatic Kasto horizontal band saw is available. Cutting diameter: 330mm, Cutting capacity X/Y: 330mm/350mm, Material feed length: 500mm, Min. cut-off length: 10mm, Min. cutting diameter: 10mm, Min. remnant length (automatic mode): 60mm, Cutting speed: 150m/min, Saw blade dimensions X/Y/Z: 5090mm/41mm/1.3mm, Material support height: 700mm. Machine dimensions X/Y/Z: approx. 1350mm/2400mm/1850mm, Weight: approx. 2200kg. Documentation available. An on-site inspection is possible. Expected to be available starting August, 2026.
Height=1.33 m, Overall length= 1.63 m, Overall width= 0.71 m, Net weight= 168 kg,
Producer: KASTO Type: HBA 420U Year of Make: 1985 Dimensions (width x height x depth): approx. 400x200x300 cm Fully automatic NC horizontal band saw 1 chip conveyor, 1 external chip conveyor, 1 person. Driven Roller Conveyor approx. 450 cm. Auction-ID: A1-48483-12
Producer: KASTO, Type: HBA 420 AU, C93I8EN Year of production: 1995 Fully automatic NC horizontal band saw with hydraulic clamping device up to 400 mm, 1 chip conveyor, 1 external Chip conveyor, 1 roller conveyor, 1 roller conveyor, hydraulic drive, motor switched off, Dimensions (width x height x depth): approx. 400x200x350 cm Auction-ID: A1-48483-9
A very well-maintained Forte horizontal band saw is available. Round cutting capacity: 320mm, max. square cutting capacity: 300mm/300mm, saw blade dimensions X/Y/Z: 3660mm/25mm/0.9mm, band speed: 100m/min, max. material feed: 400mm, max. feed length: 4000mm. Machine dimensions X/Y/Z: approx. 1950mm/1500mm/1250mm, weight: approx. 1000kg. Including roller conveyor. The machine was used in a training workshop and is in good condition. Including five bandsaws. Documentation vorhanden. An on-site inspection is possible.
cutting range: 300 mm capacity 90 degrees: flat: 330 x 260 mm capacity 90 degrees: square: 260 x 260 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: flat: 270 x 200 mm capacity 45 degrees: square: 250 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: flat: 170 x 170 mm capacity 60 degrees: square: 180 mm automatic feeds: 9999,9 mm feed: minimum 2.0 mm cutting diameter: minimum 5.0 mm band speed: 15 - 100 m/min vice: 340 mm Öffnung dimensions of saw-band: 3650 x 27 x 0,9 mm Control: MEP CNC total power requirement: 2.2 kW weight: 1240 kg range L-W-H: 1800 x 1900 x 1750 mm actual NEW price about 23.000 Euro special price on request Equipment: - robust electro-hydraulic fully automatic band saw (INDUSTRY) - with additional semi-automatic function, for cuts from 0° to 60° left - WINDOWS CE” based MEP 50 – control and 7” touch screen display simple and quick se ...
IMET KS 620 semi-automatic band saw • Cutting capacity at 0°: Ø500 mm / 620×305 mm rectangular • At +45°: Ø445 mm / 390×440 mm • At +60°: Ø245 mm / 240×310 mm • Blade: 5320 × 34 × 1.1 mm • Cutting speed: 15–100 m/min • Motor: 3 kW • Motorised input table: 12,000 × 600 mm • Motorised output table with digital display: 12,000 × 600 mm • Hydraulic vices• Integrated micro-spray• Dimensions: 2500 × 1705 × 2500 mm • Weight: 1450 kg • Condition: used, good overall visual condition Auction-ID: A1-48608-15
Additional information: CCS controlled descent device. Technical data: Blade: 2950 x 27 x 0.9 mm Power: 1.5 / 1.8 kW Cutting speed: 36 / 72 m/min Vise: 285 mm Cutting capacity at 0°: 250 / 220 / 280 x 220 mm Cutting capacity at +45°: 230 / 200 / 220 x 200 mm Cutting capacity at +60°: 120 / 80 / 140 x 100 mm Cutting capacity at -45°: 200 / 170 / 200 x 140 mm Power supply: 3 Ph Year: 2008 Dimensions: 700 x 1730 x 1810 mm Weight: 370 kg Remarks: Serial No.: 209578/26/M. Auction-ID: A1-48608-9
Working parameters: horizontal band saw with controlled descent; 2455 × 27 × 0.9 mm band; cutting speed 35/70 m/min; vise 230 mm Workpiece capacity: at 0° round 220 mm, square 210 mm, rectangle 230 × 185 mm; at +45° round 150 mm, square 150 mm, rectangle 150 × 210 mm; at +60° round 90 mm, square 90 mm, rectangle 90 × 100 mm Power supply: 3 phases; power 3 kW Year & Manufacturer: 2020, IMET Dimensions (mm): 1500 × 900 × 1250 Weight (kg): 900 Notes: GBS-218 Eco AutoCut model; serial no. A20005021. Auction-ID: A1-48608-5
MAC SPECIAL 400S Controlled Descent Band Saw • Motor: 1.5 / 1.8 kW – 3 Ph 380 V • Cutting speed: 36 / 72 m/min • Blade dimensions: 3727 × 27 × 0.9 mm • Cutting capacity: 280 × 220 mm at 0°, 220 × 200 mm at +45°, 140 × 100 mm at +60° • Max. opening vice: 285 mm • Adjustable hydraulic lowering • Dimensions: 700 × 1730 × 1810 mm • Weight: 370 kg • Serial number: 60987 • Year: 2003 Auction-ID: A1-48608-22
Power: 2.8 kW Working parameters: Capacity at 0° Ø 320 mm – 320 × 320 mm – 320 × 500 mm – Capacity at 45° Ø 260 mm – 260 × 260 mm – 260 × 340 mm – Capacity at 60° Ø 200 mm – 130 × 130 mm – 130 × 230 mm Power supply: 400 V – 50 Hz – Three-phase Year & Manufacturer: FMB – Made in Italy Weight (kg): 850 Remarks: Pegasus model. Auction-ID: A1-48608-19
work piece width: 1.200 mm workpiece height: 500 mm bore diameter: 8 - 40 mm Number of drilling agregates: 3 Stk. spindle speed:: 150 - 1.100 U / min tool changer: 15 Stk saw blade diameter: 1.430 mm cutting speed: 8 - 30 m/min total power requirement: 43 kW weight of the machine ca.: 20 t dimensions of the machine ca.: m Working Capacity Angle sections: 80 × 65 × 10 mm to 250 × 250 × 28 mm Channel sections: 80 × 45 mm to 400 × 110 mm I-beams: 80 × 46 mm to 600 × 220 mm Wide flange beams (HE): 100 × 100 mm to 1,008 × 302 mm Special wide flange and welded T-beams: up to 1,200 × 500 mm Workpiece Data Max. workpiece width: 1,200 mm Max. workpiece height: 500 mm Drilling Unit Number of drilling spindles: 3 (1 vertical, 2 horizontal) Drilling diameter: 8 – 40 mm Spindle speed: 150 – 1,100 rpm Drilling feed: 0 – 500 mm/min Rapid approach: 3,850 mm/min Rapid return: 8,000 mm/mi ...
Machine number: 701764 Saw blade length: 3200 - 3370 mm Table dimensions: 500 x 500 mm incl. welding device Auction-ID: A7-48624-2
600 mm band saw, with solid flywheels, three-phase power supply and tilting table. Operating conditions of this machine: unchecked. This item is delivered loaded on a truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-48463-42
cutting diameter: 235 mm dimensions of saw-band: 2645 x 27 x 0,9 mm cutting width: 280 x 190 mm cutting speed: 0 - 90 m/min : 120 mm : 120 mm : 190 mm Impact energy: 170 mm connected load frequency: 230 Volt total power requirement: 1,5 kW weight of the machine ca.: 290 Kg dimensions: 1,2 x 0,8 x 1,2 m Double-miter band saw - Variable speed control - Miter cuts up to 60° left and 45° right - Vise with quick-clamping mechanism - Blade tension monitoring - Automatic electric cooling system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
With 6x band saw, 12 pieces feed roller included Auction-ID: A1-48414-193
- Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-48426-715
- Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-48426-724
Danobat CR260 AFM fully automatic horizontal band saw, year of construction 1999, suitable for the accurate and efficient cross-cutting of pipes, bar material and solid material. The machine is equipped with a 4.4 kW drive, hydraulic clamp, automatic material feed and a PLC-controlled control panel with digital settings. The sawing machine has an integrated cooling system, chip collection and adjustable cutting parameters, making it suitable for serial sawing in workshops and production environments. According to the model designation, the maximum cutting capacity is approximately Ø260 mm. Features: Brand: Danobat Model: CR260 AFM Year of construction: 1999 Serial Number: 04984505 Power: 4.4 kW Fully automatic horizontal band saw Hydraulic Material Clamp Automatic material feeding Digital control panel Refrigeration installation CE marked The machine is in used condition with normal ...
Key data: 1500 mm, 15050 mm
Description FRIGGI 2MF GANTRY 1500 x 2000 x 9000 Details Serial number 3610 Year of construction 2009 Cutting diameter 1,500 mm Saw blade length 15,050 mm Cutting width 2,000 mm Total power requirement 45 kW Cutting force rectangular profile 1,500 x 2,000 mm Cutting force round profile Ø 1,500 mm Portal stroke 9,600 mm Strap dimension 80 x 1.6 mm Belt speed 10 - 120 m/min. Dimensions approx. 3,862 x 2,110 mm incl. documentation
- Infeed roller conveyor: 495x43xH99cm. - Including stainless steel pipes. Auction-ID: A1-46485-9
Video available Auction-ID: A1-40979-12
Equipped with roller bench 230x38cm Auction-ID: A1-47356-83
roll diameter:420 mm throat:400 mm workpiece height:325 mm table surface area:615 x 615 mm table swivelabel +/-:10/45 ° table - inclinable:+/- 20 ° cutting speed:20 - 2500 m/min total power requirement:2 kW weight of the machine ca.:0,5 t dimensions of the machine ca.:0,95 x 0,65 x 1,83 m
cutting diameter: 335 mm capacity 90 degrees: flat: 500 x 335 mm saw band length: 4400 x 34 x 1.1 mm speed: 15.0 - 150 m/min work height max.: 750 mm workpiece weight: 250 kg/m coolant tank capacity: 80.0 ltr. oil volume: 30.0 ltr. power capacity: 5.5 kW weight of the machine ca.: 1800 kg range L-W-H: 2000 x 2200 x 1900 mm current list price: approx. 45.000 euros Special price available upon request Features: - MEBA - Fully automatic two-column linear guide system Fully automatic machine for 90° cuts only - Automatic material feed - Continuously variable lowering speed 0â300 mm/min - Band saw speed controlled by frequency-regulated AC drive (15â150 m/min) - Automatic cutting pressure and feed monitoring - Hydraulic full-stroke material clamping - Automatic movement of the clamping blocks - Operatorâs manual The data for this ad was created with ModulMWS - the software solution ...
Mössner band saw machine type SSF 630 Year of construction 2019 Serial number 31387 400V/50Hz, 24V DC control voltage Rated power 20.2 kVA, rated current 29.2 A, fuse 32 A (max. 63 A) 2-speed manual transmission and SEW Eurodrive frequency converter Cutting speeds 27–142 m/min and 410–2200 m/min Possible saw blade dimensions for manual transmission: 6 x 0.65 mm to 20 x 0.9 mm Impeller diameter 630 mm Max. cutting width 605 mm, max. cutting height 460 mm With feed table / table enclosure For the feed table with 4 T-slots, Mössner mentions a table inclination of approx. 8° to the right and 14° to the left Documentation / operating instructions available CE marking available Auction-ID: A1-48285-89999
Power 250 W - 220V, never used Overall dimensions: 500 x 500 x 800 mm Weight: 20 kg Auction-ID: A7-48621-121
Power 250 W - 220V, never used Overall dimensions: 500 x 500 x 800 mm Weight: 20 kg Auction-ID: A7-48622-121
Power 250 W - 220V, never used Overall dimensions: 500 x 500 x 800 mm Weight: 20 kg Auction-ID: A7-48621-216
Power 250 W - 220V, never used Overall dimensions: 500 x 500 x 800 mm Weight: 20 kg Auction-ID: A7-48622-216
capacity 90 degrees: round: 150 mm capacity 90 degrees: square: 140x140 mm capacity 90 degrees: flat: 150x140 mm : 100 mm : 90x90 mm : 100x90 mm capacity 60 degrees: round: 70 mm capacity 60 degrees: square: 65x65 mm capacity 60 degrees: flat: 65x70 mm dimensions of saw-band: 1735x13x0,65 mm cutting speed: 30-80 m/min engine output: 1,5 kW : 150 mm weight of the machine ca.: 37 kg dimensions of the machine ca.: 900x460x500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
dimensions of saw-band: 4200 x 34 x 1,1 mm capacity 90 degrees: round: 320 mm capacity 90 degrees: flat: 500 x 300 mm : 320 mm : 310 x 310 mm : 200 mm : 200 x180 mm : 280 mm : 300 x 230 mm cutting speed: 18 - 115 m/min total power requirement: 4,5 kW weight of the machine ca.: 1.100 kg dimensions of the machine ca.: 14850 x 2250 x 1300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw band length: 4400 x 34 x 1,1 mm band speed: 15 - 150 m/min capacity 90 degrees: square: 500 x 335 mm capacity 90 degrees: round: 335 mm : 330 mm : 320 x 335 mm : 305 mm : 305 x 335 mm : 180 mm : 170 x 335 mm work height max.: 750 mm machine weight ab.: 1320 kg Motor Capacity: 3 kW dimensions: 1450 x 2350 x 1950 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacity 90 degrees: round: 260 mm capacity 90 degrees: square: 260 x 260 mm capacity 90 degrees: flat: 400 x 260 mm : 250 mm : 240 x 240 mm : 240 x 260 mm : 250 mm : 250 x 250 mm : 290 x 250 mm capacity 60 degrees: round: 160 mm capacity 60 degrees: square: 160 x 160 mm capacity 60 degrees: flat: 110 x 260 mm : 190 mm : 190 x 190 mm : 210 x 190 mm dimensions of the machine ca.: 1700x2000x1600 mm weight of the machine ca.: 960 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
dimensions of saw-band: 4200 x 34 x 1,1 mm capacity 90 degrees: round: 325 mm capacity 90 degrees: flat: 500x300 mm : 300 mm : 300x300 mm : 200 mm : 200x200 mm weight of the machine ca.: 1250 kg dimensions of the machine ca.: 2250 x 2100 x 1280 mm Control: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacity 90 degrees: round: 300 mm capacity 90 degrees: square: 250 mm capacity 90 degrees: flat: 380x250 mm : 260 mm : 250 mm : 300x200 mm : 180 mm : 170 mm : 200x170 mm : 240 mm : 210 mm : 280x160 mm dimensions of saw-band: 3770x27x0,9 mm : 385 mm speed: 40/80 m/min total power requirement: 1,5/1,8 kW weight: 695 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacity 90 degrees: round: 325 mm capacity 90 degrees: flat: 500 x 300 mm capacity 45 degrees: round: 300 mm capacity 45 degrees: flat: 300 x 300 mm : 200 mm : 200 x 200 mm : 60 mm dimensions of saw-band: 4200 x 34 x 1,1 mm : 165 mm min. dia.: 5 mm work height max.: 750 mm total power requirement: 3 kW : 15-150 m/min weight: 910 kg dimensions: 1300 x 2050 x 1400 mm Standard equipment: - Fast miter adjustment from 90° to 30° stepless to 0.5° accuracy according to scale. The miter turning point is the point of intersection between saw band and Material system, thereby no change in the length dimension - At each angular position of the saw frame, the material is parallel in 90° tightened - Complete coolant device with electric submersible pump - Machine stand with chip collecting tray - Precise saw band carbide roller guide, saw blade brush - 1 saw blade on machine 4-6 ZpZ - MEBA high ...
dimensions of saw-band: 2085x20x0,9 mm capacity 90 degrees: round: 185 mm capacity 90 degrees: square: 150x150 mm capacity 90 degrees: flat: 220x150 mm : 110 mm : 100x100 mm : 110x90 mm capacity 60 degrees: round: 70 mm capacity 60 degrees: square: 70x70 mm capacity 60 degrees: flat: 70x70 mm voltage: 400 V sawband speed: 35 + 70 m/min. : 230 mm total power requirement: 0,75 kW weight of the machine ca.: 195 kg dimensions of the machine ca.: 1280x550x1480 mm Domestic equipments: - stepless, electronic speed control - Optional hydraulically controlled or manual belt arm lowering - Saw arm can be swiveled up to 60 ° right - quick release vice - Band guide with 8 ball bearings - Hydraulic saw blade clamping with clamping pressure display and strip break-off - Including coolant device - incl. machine cabinet The data for this ad was created with ModulMWS - the software solution of LogoTec ...
: 400 x 32 mm capacity 90 degrees: round: 145 mm capacity 90 degrees: square: 130 x130 mm capacity 90 degrees: flat: 300 x 80 mm capacity 45 degrees: round: 105 mm capacity 45 degrees: square: 115 x 115 mm capacity 45 degrees: flat: 250 x 60 mm total power requirement: 1,8 kW weight of the machine ca.: 240 kg dimensions of the machine ca.: 800 x 1100 x 1400 mm Domestic equipments: - stepless, electronic speed control - Optional hydraulically controlled or manual belt arm lowering - Saw arm can be swiveled up to 60 ° right - quick release vice - Band guide with 8 ball bearings - Hydraulic saw blade clamping with clamping pressure display and strip break-off - Including coolant device - incl. machine cabinet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
dimensions of saw-band: 2910 x 27 x 0,9 mm capacity 90 degrees: round: 240 mm capacity 90 degrees: flat: 310 x 240 mm : 200 mm : 200 x 200 mm : 200 mm : 200 x 200 mm : 140 mm : 200 x 140 mm rest piece length: 60 mm work height max.: 900 mm dimensions: 800 x 1750 x 1500 mm weight of the machine ca.: 470 kg Control: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacity 90 degrees: round: 350 mm capacity 90 degrees: square: 350 mm dimensions of saw-band: 4640x34,1,1 mm : 355 mm sawband speed: 15-115 m/min weight of the machine ca.: 2800 kg dimensions of the machine ca.: 3050x2190x2200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacity 90 degrees: round: 220 mm capacity 90 degrees: square: 210x210 mm capacity 90 degrees: flat: 230x185 mm Cutting area at 45 degrees left: round: 150 mm Cutting range at 45 degrees: square: 150x150 mm Cutting range at 45 degrees : flat: 150x210 mm Cutting area at 60 degrees left: round: 90 mm Cutting range at 60 degrees left: square: 90x90 mm Cutting area at 60 degrees left: flat: 90x100 mm dimensions of saw-band: 2450x27x0,9 mm cutting speed: 35/70 m/min work height max.: 915 mm Vice opening: 265 mm total power requirement: 1,2 kW weight of the machine ca.: 240 kg dimensions of the machine ca.: 1550x870x1740 mm Zimmer Z241 / R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After cutting, the machine stops by a safety limit switch. The lowering is infinitely adjustable via a hydraulic system. Lifting the saw arm after cutting can be done in any position. The saw arm ...
capacity 90 degrees: round: 240 mm capacity 90 degrees: square: 240 x 240 mm capacity 90 degrees: flat: 165 x 210 mm : 195 mm : 185 x 185 mm : 130 x 190 mm capacity 60 degrees: round: 120 mm capacity 60 degrees: square: 85 x 85 mm capacity 60 degrees: flat: 85 x 120 mm : 170 mm : 145 x 145 mm : 60 x 195 mm cutting speed: 20 - 85 m/min dimensions of saw-band: 2725 x 27 x 0,9 mm : 315 mm work height max.: 900 mm Motor output: 1,2 kW Weight: 330 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacity 90 degrees: round: 240 mm capacity 90 degrees: square: 240 x 240 mm capacity 90 degrees: flat: 165 x 210 mm : 195 mm : 185 x 185 mm : 130 x 190 mm capacity 60 degrees: round: 120 mm capacity 60 degrees: square: 85 x 85 mm capacity 60 degrees: flat: 85 x 120 mm Motor output: 1,2 kW : 170 mm : 145 x 145 mm : 60 x 195 mm cutting speed: 36 + 72 m/min dimensions of saw-band: 2725 x 27 x 0,9 mm : 315 mm work height max.: 900 mm Weight: 330 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 410 mm saw band length: 5800 x 41 x 1,3 mm table height: 750 mm capacity 90 degrees: flat: 700 x 410 mm capacity 45 degrees: round: 410 mm capacity 45 degrees: flat: 500 x 410 mm capacity 45 degrees: round: links 410 mm capacity 45 degrees: flat: links 430 x 410 mm capacity 30 degrees: round: 320 capacity 30 degrees: flat: 320 x 410 : 15 - 150 m/min workpiece weight: max. 250 kg/m kg : 5,5 kW : 3200 kg : 4500 x 2800 x 2000 mm - The ergonomic panel control can be networked and offers various options Option packages Teleservice for remote maintenance Setting sawing programs in the AV Import of sawing programs from CAD with DSTV interface and data export - Automatic material feed: - In a compact design for shorter sections or with flexible insertion tongs Available in almost all lengths - Exact positioning of the material using servo positioning technology - Pioneering ...
maximum number of results exceeded
please refine your search
3.600 € 
