wood band saw used for sale

Demonstration machineExtra strong, solid, durable log band saw for a log diameter of up to 1000 mm. Soft starter is included, expandable with extension sections. Automatic feed with infinitely variable speed. Electric height adjustment can be controlled from the operator's desk. With telescopic lever log turner, log lifter, log jack with drive for horizontal log feed. Hydraulic angle stops.2 pieces of stem clamping tool. hydraulic saw blade tension. Electrically adjustable saw blade guide. CE approved.

Demonstration machineThe professional log band saw for a log diameter of up to 100 cm from Forestor Pilous is the further development of decades of sawmill tradition, specially designed for the sawing professional. With telescopic lever log turner, log lifter, log jack with drive for horizontal log feed. 5 hydraulic angle stops.2 pieces of stem clamping tool. The saw is standard for blocks up to 7.6 m and can be extended as desired. Automatic feed with infinitely variable speed. Electrical

Log band saw CTR710M, built in 2013, 12 m cutting length, incl. LG 100 and scoring machine, 6 kW, 550 kgPrices subject to change, errors, printing and typesetting errors excepted

Paul Double Edger KM2, good condition, 9.6 kW, 590 mm cutting length, 80 mm cutting heightPrices subject to change, errors, printing and typesetting errors excepted

Log band saw Pilous CTR750E, built in 2024, very good condition, electric feed infinitely variable, 5.5 kWPrice subject to change, errors, printing and typesetting errors excepted

Double edging Pilous DB700M, built in 2023, like new, incl. saw blades, 11 kW, approx. 700 kgPrices subject to change, errors, printing and typesetting errors excepted

Pilous CTR520 log band saw, good condition, cutting length 5.8 m, max. 550 mm trunk diameter, 4 kW S1, 3110 mm cutting length, 310 kgPrices subject to change, errors, printing and typesetting errors excepted

Solid band mill for materials up to the diameter of 130 cm. Soft starter is included, with extending sections expandable. Automtic feeder with variable speed. Electrically height adjustment adjustable from control panel. With hydraulic log taber, log turner and clamping tool. CE Technical details: main engine power 22 kW S1 cutting length 6,7 m max. trunk diameter 130 cm weight 2800 kg

Mobile sawmill Logosol B1001, year 2020, very good condition, 23 hp engine, hydr. Trunk compensation, XL trunk mount, trailer kitPrices subject to change, errors, printing and typesetting errors excepted

This sawing machine was manufactured in 2000 by KALTENBACH. The KBS 851 DGNC features a miter tilting capability of -60° left and -50° right, accommodating material dimensions at 90° up to 850 x 500 mm. It supports various saw blade types including M2, M42, and M51, with a cutting speed range of 20-120 m/min. Includes an integrated chip tray and Proficut control software. Ideal for steel profile cutting in construction and trade. For more information about this sawing machine, please reach out to us.

This Behringer HBP 420-723 G Metal Band Saw was manufactured in 2004. It features a Silberland B 660 / 15 m powered roller conveyor from 2010 and has operated for approximately 15,800 hours. The saw offers a cutting speed of 10-120 m/min and is powered by a 5.5 kW saw drive motor. Ideal for handling a variety of cutting sizes and angles. Contact us for more information about this machine.

This 3-axis MOSSNER Rekord SSF 630 Metal Band Saw was manufactured in 2019. It features an 11 kW reinforced motor, dual-speed manual transmission, and a complete roller guide. The saw includes a feed table with 4 T-slots, an emergency stop button, and an LED work light. Its mounted on a steel plate for stability, with spare saw blades included. Consider the opportunity to buy this MOSSNER Rekord SSF 630 Metal Band Saw. Contact us for more information.

Technical data: Cutting range: 90° round: 260 mm 90° flat: 300 x 260 mm 90° square: 260 x 260 mm +45° round: 200 mm +45° flat: 200 x 240 mm +45° square: 200 x 200 mm +60° round: 165 mm +60° flat: 160 x 120 mm +60° square: 150 x 150 mm -45° round: 200 mm -45° flat: 200 x 240 mm -45° square: 200 x 200 mm Shortest offcut length: 35 mm Total connected load: 2.0 kW Saw motor, power frequency controlled: 1.5 kW Cutting speed infinitely variable at frequency controlled: 20 - 110 m/min Saw blade dimensions: 2910 x 27 x 0.9 mm Dimensions and weight: Length, approx.: 1020 mm Width, approx.: 1830 mm Height, upper part lowered, approx.: 1460 mm Height, top in maximum position: 1900 mm Material support height: 950 mm Total weight, approx.: 510 kg Equipment: - Stepless cutting speed - Saw blade guides made of carbide, replaceable - Hydraulic cutting feed -  ...

Table dimensions X/Y: 2000mm/1750mm, cutting range: 0mm-305mm, max. blade guide height: 300mm, saw blade length: 4920mm. On-site inspection is possible.

Dimensions (L/W/H): 800x800x1350 mm weight: 35 kg total power requirement: 0 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 13000x1700x1700 mm Weight: 1950 kg Total power requirement: 13,5 / 17,5 kW kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 700x1000x1300 mm Weight: 115 kg Total power requirement: 0,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 13000x1700x1700 mm Weight: 1650 kg Total power requirement: 10 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This BOMAR Individual 520.360 GANC was manufactured in 2019. It features an automatic operating mode with a mitre cutting range of 0° – 60°. The saw band operates at speeds between 20 – 120 m/min, accommodating a maximum material weight of 2,500 kg. Ideal for those looking to enhance their metal cutting capabilities. Contact us for more information about this machine.

CNC Saw Brand: SOITAAB (FRIGGI) Model: SF300 CN Type: Automatic Structure: Double column cylinders Round cutting capacity: up to 300mm Saw blade speed variation Ethernet interface (Industry 4.0)

cutting diameter: max. 225 mm saw band length: 2.480 mm width of saw-band: 27 mm dimensions of saw-band: 2.480 x 27 x 0,9 mm cutting angle: 0 - 60 ° band speed: 20 - 90 m/min Cuttingrange 90°: max. 225 mm capacity 90 degrees: square: 190 mm capacity 90 degrees: flat: 150 x 245 mm capacity 60 degrees: round: 90 mm capacity 60 degrees: square: 90 mm capacity 60 degrees: flat: 120 x 90 mm capacity 45 degrees: round: 145 mm capacity 45 degrees: square: 150 mm capacity 45 degrees: flat: 190 x 150 mm total power requirement: 1,5 kW weight of the machine ca.: 185 kg dimensions of the machine ca.: 1,5 x 1,2 x 1,6 m Documents: Saw Bands: 1x Coolantsystem: Metal Bandsaw OPTIMUM - OPTIsaw S 275 PV The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 430 mm

Fully automatic band saw machine Manufacturer : Kasto Type: Twin A4 Bauahr: 2010 Condition: gebraucht / used Location : Warehouse Sweden Technical data Cutting range: Cutting range around 430 mm Cutting area square H x W 430 x 430 mm Cutting area flat H x W 430 x 430 mm Clamping range 0 – 430 mm Smallest dimension to be sawn: 10 x 10 mm Smallest section length 6 mm Shortest residual piece length in automatic mode (only possible for geometrically flawless surfaces) 35 mm Shortest offcut length in single cut 10 mm Dimensions and weights: Length approx. 2,140 mm Width incl. chip conveyor 4,610 mm Height (saw frame lowered) approx. 2,195 mm Height (saw frame in maximum position) approx. 2,410 mm Material support height 700 mm Coolant: Coolant tank volume 150 l, Pump capacity at 3 m head 25 l/min Paintwork: Machine light grey RAL 7035 textured paint Saw  ...

cutting diameter: 260 mm capacity 90 degrees: round: 260 mm capacity 90 degrees: square: 250 x 400 mm saw band length: mm table height: mm cutting speed: 20 - 80 m/min Control: konventionell total power requirement: 2,0 kW weight of the machine ca.: kg Dimensions (LxWxH): 2,0 x 1,4 x 1,2 m Horizontal band saw, semi-automatic The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Band Saw Bizerba FK 23, completely in stainless steel, with portioning stop, brake, year of construction 2004, including 3 new saw blades, new scrapers, Connection 400V, dimensions LxWxH approx. 50x57x86cm, weight approx. 75kg, used, good condition, fully functional

Band saw — horizontal Cutting diameter / cutting range (round) up to approx. 250 mm diameter Cutting range rectangular / square, typically also approx. 250 × 250 mm (depending on the material shape) Saw blade length ≈ 3660 mm Saw band width / thickness (band dimension) 25 mm belt width, approx. 0.9 mm thickness (e.g. 3660 × 25 × 0.9 mm) Cutting speed adjustable approx. 20 – 70 m/min, infinitely variable Weight of the machine approx. 700 – 850 kg

This JAESPA W 440 HA Metal Band Saw was manufactured in 2015. It features a saw band length of 4,900 mm and operates on 400 V / 25 A. Certified with CE standards, consider the opportunity to buy this JAESPA W 440 HA Metal Band Saw. Contact us for more information.

A fully automatic hydraulic horizontal band saw Amada in scissor design is available. Round cutting capacity: 254mm, rectangular cutting capacity: 254mm/279mm, saw band dimensions X/Y/Z: 3505mm/27mm/0.9mm, speed: 80m/min, feed: 390mm/stroke, max. cutting length: 3500mm, max. table load: 1000kg. Machine dimensions X/Y/Z: approx. 2250mm/2000mm/1500mm, weight: approx. 1250kg. An on-site inspection is possible.

cutting diameter: 325 mm saw band length: 4200 mm cutting width: 500 mm : 15 - 150 m/min. work height max.: 750 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 255 mm dimensions of saw-band: 2750 x 27 x 0,9 mm cutting width: 200 x 320 mm cutting speed: 20 bis 80 m/min : 125 mm : 125 x 125 mm : 195 mm Impact energy: 350 mm connected load frequency: 400 Volt total power requirement: 1,5 kW weight of the machine ca.: 290 Kg dimensions: 1,1 x 0,8 x 1,75 m Double miter band saw -Miter cuts up to 60° left and 45° right -Vice with quick clamping device -Band tension control -Electr. Automatic cooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 235 mm dimensions of saw-band: 2645 x 27 x 0,9 mm cutting width: 280 x 190 mm cutting speed: 45/90 m/min : 120 mm : 120 mm : 190 mm Impact energy: 170 mm connected load frequency: 400 Volt total power requirement: 1,1 kW weight of the machine ca.: 290 Kg dimensions: 1,2 x 0,8 x 1,2 m Double miter band saw -Miter cuts up to 60° left and 45° right -Vice with quick clamping device -Band tension control -Electr. Automatic cooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 26014 Technical data: - Automatic workflow cutting process, hydr. Lifting / lowering - of the saw frame, mitre adjustment with hydr. Clamping - Automatic material replenishment machine, mot. Mitre adjustment - Saw blade dimensions 4400 x 34 x 1.1 mm - Cutting speed infinitely adjustable 15 - 150 m/min - Cutting pressure regulation infinitely variable 10 - 15 bar - Lowering speed 0 - 300 m/min - Cutting range 30° - 90° - at 90° around 335 mm - Square flat 500 x 335 mm - at 45° around 330 mm - Square standing 320 x 335 mm - at 30° square standing 170 x 335 mm - Material replenishment machine - Discharge roller conveyor 4000 mm - Feed roller conveyor 4000 mm - Drive 400 V / 6.5 kW - Space requirement approx. W 2300 x H 1750 x D 2200 mm - Weight approx. 1800 kg

Miter range: 90°/30°, saw band inclination: 2°, max. cutting diameter: 260mm, max. cutting dimensions X/Y: 300mm/260mm, saw band dimensions X/Y/Z: 3350mm/27mm/0.9mm, machine dimensions X/Y/Z: approx. 2000mm/1650mm/1850mm, weight: approx. 650kg. An on-site inspection is possible.

cutting diameter: 450 mm saw band length: 6600 x 41 x 1,3 mm table height: 800 mm : 450 mm : 450 mm : 450 x 270 mm workpiece weight: 15 - 95 m/min : 7,5 kW work height max.: 3000 kg connected load: 3750 x 1400 x 2100 mm Control: NEW PRICE ~ 40.700 EURO very good condition Semi-automatic bandsaw, two-column guided Equipment: - hydraulic vice - infinitely variable cutting speed - chip conveyor - line laser - driven chip brush - coolant device - operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A metal band saw is sold. Suitable for someone who has little space available. Dismantling and removal by buyers Pallet truck and a 1.6t forklift on site. Price is 2500 Euro net plus VAT Machine can and should be inspected and tried out on site, as warranty or guarantee is excluded. Item location 90766 Fürth All information without guarantee

Cutting range round material: 220mm, cutting range flat material: 350mm/220mm, cutting range rectangular material: 220mm/220mm, saw band dimensions X/Y/Z: 3720mm/27mm/1mm, cutting speed: 120m/min, machine dimensions X/Y/Z: approx. 2400mm/1900mm/1500mm, weight: approx. 1350kg, operating hours: approx. 1450h. The drive cylinder must be sealed. Documentation available. An on-site inspection is possible.

2 Column Heavy Duty Band Saw Machine BERG & SCHMID SBS 300 VA-1/CNC Year of Make: 2019 Cutting diameter round: 300 mm Square cutting diameter: 300 mm Cutting diameter flat: 300 mm x 260 mm Belt speed: 20 – 100 m/min Modern SNC 20 control system Frequency-controlled saw drive Control buttons with pictograms Powered chip brush Belt Tension Hydraulic Clamping Pressure Regulation Work light Chip conveyor Taxiway 2 m

cutting diameter: 220 mm saw band length: - mm cutting width: - mm total power requirement: 0,7 kW weight of the machine ca.: 0,240 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: ~ 700 mm width: ~ 600 mm height: ~ 2.000 mm Vollmer Junior B automatic bandsaw sharpener for sharpening bandsaw blades. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Metal band saw, band saw machine, band saw, vertical band saw -Manufacturer: Mössner Rekord, vertical band saw type SM/420 with saw band welder -Cutting width: max. 400 mm -Cutting height: max. 230 mm -Motor power: 1.1/1.7 KW -Voltage: 380 volts, 50 Hz, 4.6/3.6 A -Band saw: length 3150 to 3260 mm -Band saw speed: adjustable -Work table: pivotable in 2 axes: -Band saw welder: Ideal BSO -Dimensions: 940/750/H1850 mm -Weight: 548kg

Metal band saw, fully automatic, band saw machine, band saw, vertical band saw, horizontal band saw, hydraulic horizontal band saw machine, automatic band saw, automatic metal band saw -Manufacturer: DoAll, Horizontal band saw, Automatic band saw type C-916A -Cutting dimensions (flat): approx. 410 x 230 mm -Cutting data round: approx. 230 mm -Cutting data square: approx. 230 mm -Saw blade speed: continuously adjustable, 15 - 120 m/min -Engine power: 3 kW -Saw blade: approx. 4014 mm -Coolant system: present -Dimensions: 2080/1400/H1390 mm -Weight: 670 kg

Metal band saw, band saw machine, band saw, vertical band saw -Manufacturer: Pehaka, Vertical band saw USF-5R -Drive: 3 kW -without brakes, removed -Cutting width: max. 500 mm -Cutting height: max. 400 mm -Saw blade: Length 3850 to 4050 mm -Saw blade speed: stepless -Work table: swiveling -Accessories: including additional band saw blades (see photos) -Dimensions: 1300/910/H2140 mm -Weight: 625 kg

Metal band saw, band saw machine, band saw, vertical band saw -Manufacturer: Pehaka, vertical band saw type USF 10R -Drive: 2.2 kW -Cutting width: max. 1020 mm -Cutting height: max. 275 mm -Saw band: length 4700 to 4800 mm -Saw band speed: continuously adjustable from 12-2000 rpm in 4 gear levels -Work table: pivoting 45°/15° -Dimensions: 2160/1000/H2000 mm -Weight: 1250 kg

Metal band saw blade, band saw blade, metal saw band -Manufacturer: Wikus, Bi-metal saw band M42 VPE with 10 pieces unused Ovp -Type: Biflex Kobali M42 3660 x 25 x 0.90 mm -Quantity: 2x box available -Price/Distribution: per box -Transport dimensions: 790/600/H35 mm -Weight: 8.2 kg/piece

Metal band saw, band saw machine, band saw, vertical band saw -Manufacturer: Mössner Rekord, vertical band saw type SM/400 with saw band welding device -Cutting width: max. 390 mm -Cutting height: max.215 mm -Engine power: 1.1 KW -Saw band: length 2780 to 2980 mm -Saw blade speed: adjustable -Work table: swiveling -Band saw welding machine: Ideal BSO -Dimensions: 1050/630/H1670 mm -Weight: 414 kg

capacity 90 degrees: round: 115 mm capacity 90 degrees: flat: 100 x 150 mm band saw dimensions: 1638 x 13 x 0,65 mm : 20/29/50 m/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 300 mm, 3920 mm, 34 mm

Extensive standard equipment: Double Column Structure Double Vice with Full Stroke Tension (Hydraulic) Floating Pendulum Vise Hydraulic Saw Band Tension Automatic feed in pendulum mode (500mm) Carbide saw blade guide system Stepless speed control by inverter Driven wire brush Work Light Automatic Chip Conveyor User-friendly NC control with touchscreen Display of belt speed on the touchscreen Flushing hose for machine cleaning

Used automatic band saw Sabi PBS250A with CNC Sabi and CE. CNC: Sabi. Cutting capacity round: 250mm. Cutting capacity square: 250x230mm. Cutting speed: 15 to 105m/min. Cutting tape: 3660x27x0,9mm. Power: 2,2Kw. Dimensions: 1980x1650x1430mm. Machine weight: 1250Kgs. CE: Yes.

Semiautomatic band saw Starret ST-4040 with CE. Cutting capacity round: 280mm. Cutting capacity square: 280x280mm. Cutting capacity rectangle: 280x400mm. Angle cut: Yes. Cutting speed: 15 to 120m/min. Cutting tape: 3550x27x0,9mm. Power: 1,5Kw. Dimensions: 1150x1900x1700mm. Machine weight: 735Kgs. CE: Yes.

cutting diameter: 440 mm saw band length: 5200 x 1,1 x 34 mm cutting width: 610 x 440 mm cutting speed: m/min total power requirement: 3,7 kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: 2,7 x 1,55 x 1,5 m Band saw horizontal - Coolant system - Emergency stop switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 230 mm

suitable for mitre cuts on one side Cutting area at 90° round 230 mm, flat 280x150 mm at 60° round 133 mm, flat 130x90 mm Cutting speed 40 + 80 m/min incl. Hydraulic material feed Chip clearing brush, coolant device, roller conveyor piece