wood band saw used for sale

Wooden planks approx. 36 pieces, approx. 20x200 cm, partly cut, in stock on pallet

Office furniture wood décor grey light, 4 x desk plus mobile pedestal, 2 x office swivel chair, 2 x filing shelf FM transverse roller shutter light grey, approx. 120 x 42 x 95h cm, WITHOUT contents

Filing cabinet wood décor grey, approx. 80 x 45 x 200h cm, 2 pcs., lockable

Office furniture meeting table wood décor, approx. 90 x 250 x 76h cm, with 8 x cantilever metal seat fabric, color black

Office furniture wood décor grey light, 2 x desk semi-circular with mobile pedestal 4 drawers, 2 x office swivel chair, 2 x file shelf light grey, approx. 120 x 42 x 220h cm, sliding doors at the bottom, 2 x filing cabinet with 3 x drawer hanging file, approx. 100 x 42 x 200h cm, WITHOUT contents

This 4-axis HOMAG BAZ 211/40K was manufactured in 2010. It features a vacuum clamping system with multiple configurations, a powerful vacuum pump, and a Flex5+ sawing, milling, and drilling aggregate. The machine is equipped with three tool changers and an edge banding package for enhanced processing capabilities. If you are looking to get high-quality CNC wood machining capabilities, consider the HOMAG BAZ 211/40K machine we have for sale. Contact us for further details.

This 3-axis Weeke Venture 1M CNC Wood Machining Centre was manufactured in 2008. It features a horizontal drilling unit with 6 individually programmable spindles and a grooving saw aggregate for X-Y direction processing. The machine is equipped with an automatic tool change spindle and a rear automatic tool changer with 6 positions. If you are looking to get high-quality wood machining capabilities, consider the Weeke Venture 1M machine we have for sale. Contact us for further details.

New and unused in the packaging. 336 pieces Composite Fence Board Anthracite / Black 182.5x15.4x2 cm. Model: Wood grain structure Auction-ID: A1-40136-372

Vacuum drying chamber with a capacity of 5m long. Equipped with hydraulic clamp unit from top to bottom to keep the wood flat. including all accessories. Was delivered in 2018 and moved in 2019 to a location where unfortunately there was too little power so it has not run anymore. Has been standing still for several years, trolley stored outside, drying room and HF Unit dry inside. Is prepared outside when sold so that a loading crane can lift it. Can bring fresh wood such as maple or poplar to a moisture percentage below 10 percent in 1.5 weeks. European oak from fresh to kd in 3 weeks. Works with vacuum and a microwave signal through the wood, without air in the room. See Canadian Woodworks on Youtube for info. Spruce and larch can be kiln-dried within a week. Purchase price including import costs €67,000 excl. Equipped with drying chamber, control cabinet, external rails with electr ...

Batch of unused Giss wood drills 35x Weight: 6.5KG net Auction-ID: A1-46070-281

Sauna bench wood approx. 160b cm

Solid wood dining table approx. 200x105 cm, with metal sled base, powder-coated, without the chairs

\" Rathenow measuring microscope 30x – in a wooden box measuring microscope / thread counter of the brand Rathenow with 30x magnification and lateral micrometer screw for fine adjustment. Device in wooden case with accessories as shown. • Manufacturer: Rathenow • Magnification: 30x • Version: Measuring microscope with integrated micrometer screw • Fine adjustment via scale drum • Eyepiece with diopter/focus adjustment • Supplied in a wooden box \" Auction-ID: A7-46417-315

Work table with solid wooden top and screwed steel base. Wooden panel with signs of wear and scratches, but stable and without structural damage. Frame with typical wear from workshop use. Overall, solid and operational. Dimensions: approx. 100 × 70 × 85 cm (L × W × H) Table top: solid wood, glued Frame: steel, lacquered Construction: four-legged frame with cross struts Auction-ID: A7-46417-28

Workbench with wooden top, drawer cabinet and Sandvik holder Equipment / Scope of delivery: Workbench with wooden worktop Undermount drawer cabinet (ROUGH, 3 drawers) Back wall / perforated wall SANDVIK Coromant holder C8 (yellow tool holder as in the photos) Notes: Traces of use present No other accessories included, if visible in the pictures = sale without contents! Dimensions (L × W × H): approx. 150 × 90 × 84 cm (+45 cm back wall)Manufacturer of drawer cabinet: RAU Number of drawers: 3 pieces Material Worktop: Wood, used Condition: Used, functional Auction-ID: A7-46417-7

\" Length gauge 600 mm made of steel with wooden cassette (test equipment) Length gauge of steel with nominal dimension 600 mm for use as reference and adjustment dimension in metrology. • Nominal length: 600 mm • Design: one-piece final dimension • Material: steel • Application: reference and adjustment dimension • Standard / accuracy class: not specified \" Auction-ID: A7-46417-240

\" high-quality lot made of border gauges (GO / NO-GO), stored in original wooden boxes. The gauges cover a diameter range of approx. 1 mm to 25 mm. The teaching materials are mainly designed in pairs (good / reject), with scale or tolerance marking (e.g. H7, Cr). In some cases, inspection stickers are available. • Tool type: Limit gauges / limit gauges (GO / NO-GO) • Diameter range: approx. 1 mm – 25 mm • Tolerances: predominantly H7 (others possible) • Design: double-sided (good / reject) • Storage: wooden boxes • Condition: used \" Auction-ID: A7-46417-181

\" Locksmith/precision angle (90°), steel, in wooden boxes Marking (on the boxes): • Russian inscribed: \"Угольник слесарный\" • 100 mm, class 1 • GOST 3749-65 • \"Сделано в СССР\" (Made in USSR) Number of pieces: 7 pieces Condition: • several angles as good as new / very little used \" Auction-ID: A7-46417-253

CNC - processing center Brand: COMEC Type: MD TOP The ideal CNC solution to process narrow and complicated work pieces EASY with COMEC processing length up to 2.000 mm Head configuration individually customizable for: - saw with 360° - axis - milling unit for horizontal and vertical processing - drilling head with separate jumping spindles vertical and horizontal - multiple spindle drilling heads separate jumping even horizontal - horizontal milling unit with 360° C - axis Special developed clamping table, moves automatically program controlled in X direction Furthermore, optionally available: - Automatic raw work piece feed with finished work piece return to the operator TPA control unit: CNC control with graphical user interface Parametric software with 3D modeling Necessary processing macros customized to you pre-installed

wood chipper Engine: JCB-E460PE petrol engine Engine type: 4-stroke OHV, 1-cylinder Engine capacity: 457 cc Engine power: 15 hp Starting: Electric start and pull starter Drive: Belt Drive Chopping method: Flywheel system (disc system) Disc diameter: 600 mm Drive speed: 1800 rpm Blades: 2 chopping blades + 6 shredding blades Max. branch diameter: 120 mm Feed opening: 588 × 440 mm Input channel: 278 × 167 mm Ejection tube: 360° rotatable Safety: emergency stop Fuel: Petrol fuel tank: 6.5 litres engine oil: SAE 30 / 15W40 Oil capacity: 1100 ml chassis: mobile chassis Wheels: pneumatic tires Wheel diameter: 16 inches (400 mm) Towing device: ATV tie rod (not omitted) Noise level: 120 dB Dimensions (L × W × H): 2760 × 980 × 1730 mm Net weight: 260 kg Included: manual and tool kit Condition: unused, i ...

wood chipper Engine: JCB-E225P petrol engine Engine type: 4-stroke OHV, 1-cylinder Engine capacity: 224 cc Engine power: 7.5 hp Start: Pull Starter Drive: Belt Drive chopping method: drum system (drum) Disc diameter: 350 mm Disk speed: 2800 rpm Blades: Double reversible cleaver blades Max. branch diameter: 100 mm Feed opening: 450 × 378 mm Input channel: 148 × 223 mm Ejection tube: 360° rotatable Safety: emergency stop button and safety bar Fuel: Petrol Fuel tank: 3.6 litres engine oil: SAE 30 / 15W40 Oil capacity: 600 ml chassis: mobile chassis Wheels: pneumatic tires Wheel diameter: 14.5 inches (368 mm) Towing device: ATV tie rod (not omitted) Noise level: 118 dB Dimensions: 2279 × 651 × 860 mm Net weight: 120 kg Included: manual and tool kit Condition: unused, in wooden box Box dimensions:  ...

The lot contains 16 wooden closed storage bins. In good condition. Auction-ID: A3-43525-34005

This 5-axis MORBIDELLI Author X5 was manufactured in 2008. It features a working field of 3050 mm in the X direction, 1348 mm in the Y direction, and 400 mm in the Z direction. The machine is equipped with a powerful 11 kW spindle and a tool changer with 12 positions. If you are looking to get high-quality CNC wood machining capabilities, consider the MORBIDELLI Author X5 machine we have for sale. Contact us for further details.

Technical Highlights & Application Material: The polyamide remains elastic and follows the natural movements of the wood (in contrast to classic putty). Reworkability: After cooling (approx. 30–60 seconds with cooling block), the area can be sanded, planed, glazed or painted immediately. Temperature: It is important to process at approx. 180 °C to 190 °C in order to ensure an optimal connection with the wood fibres. Scope of delivery in the \"Large Set\" As a rule, everything is delivered in a sturdy plastic case: Gun BCD 360 (with temperature regulator). Cooling blocks (aluminum, for fast curing). Planer (for flush removal of the protrusion). Wide range of colours Auction-ID: A1-46501-1508

Auction-ID: A1-46501-2059

2 cupboards 44 cm deep, 1 cupboard 48 deep, with intermediate shelves see pictures, without key Auction-ID: A1-46501-714

around 6cm, 100cm long, unused comes as a package Auction-ID: A1-40418-450

Workshop stool wood approx. 30cm diameter Auction-ID: A1-46501-2108

round 8 cm, 180 cm long, unused delivered as a package Auction-ID: A1-40418-453

New and unused in the packaging. 336 pieces Composite Fence Board Anthracite / Black 182.5x15.4x2 cm. Model: Wood grain structure Auction-ID: A1-40111-372

Auction-ID: A1-46501-2088

Blum Pot Hinges + Mounting Plates Häfele Symo locks, cylinder cores, Biscuit Connector Minifix ,…. Auction-ID: A1-46501-2160

This beautiful wooden Kromhout Whaler sloop \"Curved Wood\" is available for an enthusiastic water sports club or water sports enthusiast. This sloop has a rich history of winning various prizes in the sloop rowing world. And is also a gem for the eye on the water! Features: • Classic high quality design, with handmade craftsmanship from 1997 build number 15 • length 7.90m • width 1.90m • height 0.97m • Weight 550kg • FSN number 173 This kromhout whaler sloop is suitable for sloop rowing, recreational boating or as a showpiece. It is also possible to convert this sloop into a motor sloop. The sloop offers enough seating for several people and can be manned up to a maximum of 8 rowers. Sloop is offered incl. • Trailer • Belts (stacking system) • Deck tent system The sloop has recently been provided with a new layer of antifouling and is therefore ready to be lau ...

round 8cm, 200cm long, unused will be delivered as a package Auction-ID: A1-40418-452

4 pieces spruce/fir glue wood panel 18mm thick 2.50 x 1.20 m Auction-ID: A1-46501-991

Auction-ID: A1-46501-2074

Steel and solid wood, with handle, compartment for routing slip Auction-ID: A1-46501-100

Assembly trestles/workshop trestles/multifunction, height-adjustable Width adjustable Various designs with roller conveyors Underlays and the like Auction-ID: A1-46501-2141

round 8cm, 100 cm long, unused will be delivered as a package Auction-ID: A1-40418-454

Auction-ID: A1-46501-2989

Stehle Profile Cutter Head 134x80x30mm Auction-ID: A1-46501-2040

Auction-ID: A1-46501-2144

Mixed Lot of Cleaning Equipment with Cleaning Agents Auction-ID: A1-46501-2099

Around 6cm, 250cm long, unused Comes as a package Auction-ID: A1-40418-451

Around 6cm, 180cm long, unused Comes as a package Auction-ID: A1-40418-449

- Total installed power 48.70 kW. - Composition: - Input table with 6 work fields for preparing packages. - Milling unit composed of 3 motorized mats for moving the packages of parts and a main carriage for cross-cutting and gluing. - Diameter of the cutters 250 mm. - Milling unit power 11 kW - 2880 rpm. - Cut-off saw diameter of 250 - 350 mm. - Scoring disc diameter 115 mm. - Pre-pressing and cutting unit. - Final pressing unit. - Minimum dimensions of wooden pieces 150 x 15 x 30 mm. - Maximum dimensions of wooden pieces 1400 x 80 x 150 mm. - Maximum board length 6000 mm. - IMPORTANT: The bag aspirations and suction pipes shown in the photographs are NOT included. - This machine is currently disassembled. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified a ...

Wood production line manufactured in 2020. This HYMMEN JUPITER JPT C 680/548 mit OFS 850 features a maximum printing width of 548 mm, with a system speed ranging from 8 to 65 m/min. It is designed for high-speed surface finishing of large panels, ideal for the flooring and furniture industries. If you are looking to get high-quality printing capabilities, consider the HYMMEN JUPITER JPT C 680/548 mit OFS 850 machine we have for sale. Contact us for further details.

2 pieces Slatted wall dimensions. 55x238 cm ; 3 pieces of modular wood composite fence parts 180x180 cm Auction-ID: A1-46266-499

Length 240 cm; planed with rounded corners; impregnated Auction-ID: A1-46266-490

Including decking boards hardwood and composite; façade cladding; frame profiles; Length up to 460 cm; partly B-choice; Pallet size 460x110x84 cm Auction-ID: A1-46266-505