wood band saw used for sale

Lot contains: 1x Aluminium door in aluminium frame (183 x 90 cm) 1x Hinges and locks Note: Delivered WITHOUT poles. Auction-ID: A1-45099-2304

Set of 2 pallets of grating compatible with pallet racks. Quantity: 50 pieces per pallet Total quantity: 100 pieces Suitable for pallet racks. Auction-ID: A1-49935-80

Set of 2 pallets of grating compatible with pallet racks. Quantity: 50 pieces per pallet Total quantity: 100 pieces Suitable for pallet racks. Auction-ID: A1-49935-91

Set of 2 pallets of grating compatible with pallet racks. Quantity: 50 pieces per pallet Total quantity: 100 pieces Suitable for pallet racks. Auction-ID: A1-49935-89

Assortment of wood screws TORX 10520 pieces multiple types of sizes Auction-ID: A1-40897-315

Specifications: Model: JCB-CH150120PE Engine: JCB-E460PE 4-stroke OHV, 1 cylinder Engine capacity: 457 cc Power: 15 hp Starting method: Electric and pull start Drive: Belt Shredding capacity: 120 mm Infeed hopper (mm): 588 × 440 Feed opening (mm): 278 × 167 Disc diameter: 600 mm Blades: 2 slicing blades + 6 shredding blades Disc speed: 1800 rpm Fuel tank capacity: 6.5 litres Auction-ID: A1-40897-240

Assortment of wood screws TORX 10520 pieces multiple types of sizes Auction-ID: A1-40897-314

Assortment of wood screws TORX 21240 pieces multiple types of sizes Auction-ID: A1-40897-316

Assortment of wood screws TORX 21240 pieces multiple types of sizes Auction-ID: A1-40897-317

PARCO® Chipboard screws 4.0 x 30mm Span-Fast blue galvanized - TX20 PARCO® Chipboard screws 4.0 x 40mm Span-Fast blue galvanized - TX20 PARCO® Chipboard screws 4.0 x 50mm Span-Fast blue galvanized partial thread - TX20 PARCO® Chipboard screws 4.0 x 60 Span-Fast blue galvanized partial thread - TX20 PARCO® Chipboard screws 4.0 x 70mm Span-Fast blue galvanized partial thread - TX20 PARCO® Chipboard screws 5.0 x 80 Span-Fast blue galvanized partial thread - TX25 PARCO® Chipboard screws 5.0 x 90 Span-Fast blue galvanized partial thread - TX25 PARCO® Chipboard screws 5.0 x 100 Span-Fast blue galvanized partial thread - TX25 PARCO® Chipboard screws 6.0 x 120 Span-Fast blue galvanized partial thread - TX30 Auction-ID: A1-40897-94

Assortment of wood screws TORX 10520 pieces multiple types of sizes Auction-ID: A1-40897-313

Our JCB-CH75100P petrol wood chipper is built with high-quality robust materials to shred logs up to 100mm in diameter. With an ATV tow bar, this is ideal for anyone who manages forest or brush on estates, farms, construction sites, roads, trails, or general large gardens. (Please note, it cannot be pulled over the road). Auction-ID: A1-40897-104

Specifications: Model: JCB-CH150120PE Engine: JCB-E460PE 4-stroke OHV, 1 cylinder Engine capacity: 457 cc Power: 15 hp Starting method: Electric and pull start Drive: Belt Shredding capacity: 120 mm Infeed hopper (mm): 588 × 440 Feed opening (mm): 278 × 167 Disc diameter: 600 mm Blades: 2 slicing blades + 6 shredding blades Disc speed: 1800 rpm Fuel tank capacity: 6.5 litres Auction-ID: A1-40897-220

Assortment of wood screws TORX 10520 pieces multiple types of sizes Auction-ID: A1-40897-312

Are you done with those branches and piles of garden waste lying around? Meet the Caravaggi Bio 50 petrol shredder, a compact powerhouse that effortlessly processes pruning waste, branches and leaves into fine, usable wood chips or compost. Thanks to the legendary Honda petrol engine, this machine always starts immediately and delivers consistent, reliable top performance. No hassle with extension cords, but ultimate freedom everywhere in the garden! Runs like a charm and has a very long lifespan. Professional Shredding System: Equipped with a razor-sharp blade system that makes short work of hard branches and soft green waste. Large feed hopper: Wide opening so you can work efficiently and quickly without having to prune all side branches beforehand. Mobile & Compact: Thanks to the sturdy transport wheels and the ergonomic handle, you can effortlessly move the machine over lawn or pavem ...

Wood drill bit set for precise drilling in different wood materials Ideal for hard and soft wood, chipboard, veneered furniture or plywood. Suitable for drilling holes with small to medium diameters. Auction-ID: A1-40897-1016

You use this set for milling wooden parts and workpieces in a professional manner. The set is complete and we deliver it in a sturdy aluminum storage case. In addition, each milling head has its own compartment. This ensures that the cutters always stay in place, even in the event of a shock, impact or transport over uneven ground. About the HBM 35 Piece Wood Router Set With 35 different attachments, this set is complete. Despite the different profiles, all leaders still have a standard recording. So you can attach them to most milling machines without any problems. The pieces are also finished with a sleek, blue coating, giving them a professional look. Finally, on the inside of the case, at the top, there is a soft padding. This protects the metal headpieces from impacts, damage or wear. Auction-ID: A1-40897-145

Vertical band saw MÖSSNER REKORD type SM 420Masch. No. 17010 Year of construction 1968Roller diameter 420 mmRadius in width 415 mmRadius in height 265 mmTable size 605 x 600 mmBelt speed 18 - 562 m/min. 8 stepsSaw blade length min/max. 3150 / 3260 mmDrive power 1.1 / 1.7 kWNet connection 380 V 50 Hz- Saw blade speed over 4 gear stages and 2 motor speeds- Saw blade butt welder IDEAL BS 0-16 with scissors and grindstone- swivelling work table in 2

Vertical band saw HESKA type ESA 4Fabr. No. 681174 year of construction approx. 1985Roller diameter 420 mmThroat depth 400 mmTable size 500 x 500 mmCutting height 285 mmSaw blade length min. 3200 - max. 3400 mmSaw blade speed Gear stage (1) 15-140 m/min. Saw blade speed gear stage (2) 150-1400 m/min. Motor power 1.5 kWNet connection 380 volts, 50 Hz - stepless saw blade speed via PIV gearbox with handwheel adjustment and 2 gear steps - saw table swivel in 2 axes -

Vertical band saw JAESPA type MSU 4Fabr. No. 724749 year of construction approx. 1980Roller diameter 420 mmProjection 400 mmTable size 610 x 610 mmCutting height 260 mmSaw blade length min. 3200 - max. 3400 mmSaw blade speed 10-1500 m/min. infinitely variableMains connection 400 volts, 50 Hz- infinitely variable saw blade speed via 2 gear stages and infinitely variable via belt drive- Saw table swivel- Saw blade butt welding machine IDEAL BS0-16- Saw blade shear- Sharpening stone for grinding the weld seamSpace requirement L x W

This is a Pedrazzoli metal band saw machine (band saw), a semi-automatic crosscut saw for metal on a steel base/table with coolant collection. Machine Brand: Pedrazzoli Type: band saw machine / band saw machine for metal (radial arm saw) Version: on its own base with collection tray, electric operation with emergency stop and on/off buttons on the control panel Saw blade (nameplate 1) Saw blade size: SV. 2450 x 27 x 0.9 mm Material: Bimetal Cobalt M42 Tooth pitch (Z): varying according to material thickness, from 8/12 (thin material) to 3/4 (thick cross-sections >100 mm) Lubrication advice drive: oil ISO 460, e.g. Agip Blasia 460 Lubrication advice hydraulics: oil ISO/L/HV type SA-A, e.g. Agip H Lift 46 Cutting speed and tension tables present on the plate (for adjustment per material) Drive motor (nameplate 2 — Siemens) Brand: Siemens Made in: Czech Republic Thermal  ...

Technical data Type: BS 40 Design: vertical metal band saw machine Saw blade length: 3,140–3,360 mm Strip welding device: IDEAL BSO/16 Strip welding device connection voltage: 220-235 V Line frequency of the strip welding device: 50-60 Hz Strip welding device power: 2 kVA Configuration With metallic work table, manually height-adjustable saw blade guide, integrated IDEAL saw blade welding device and grinding device for saw blades. Remarks The machine comes from a plant closure, was actively used in production until the end and was electrified. Auction-ID: A7-49302-17

Optimum OPTI S 275 G Professional Metal Band Saw, Year 2006, Heavy Duty Frame Mounted. Machine equipped with an adjustable clamping vice, a swivelling bow for straight and angled cuts, a hydraulic lowering system, a control panel with emergency stop and an integrated lubrication/cooling system. Two cutting speeds: 45 and 90 m/min. Blade of 2480 × 27 × 0.9 mm. Maximum capacity at 90°: 180 × 245 mm for rectangular profiles and Ø 225 mm for round parts. Power supply 400 V – 50 Hz, motor power 1.1 kW. Weight indicated by the manufacturer: 200 kg. Auction-ID: A3-46152-37202

Includes 2 banding rolls in packaging. Auction-ID: A1-49846-323

Mitre Cold Circular Saw EISELE Type VMS-III-S-PVTyp No. 430 Fabr. No. 2371 Year of construction 1991Saw range at 90 (round) 120 mmSaw range at 90 (flat) 150 x 110 mmSaw range at 45 (round) 100 mmSaw range at 45 (flat) 120 x 100 mmSaw blade diameter 350 mmSaw blade speed 17 + 34 rpm. Mitre cut 45 to the left, 90 and up to 30(60) to the right, infinitely variableMotor power 2 and 2.6 kWNerg connection 380 volts, 50 Hz- two cutting speed levels over 2 motor speeds-

Technical data: Machine stand, Type 539 Band saw roll diameter 1400 mm Band saw roll width 180 mm Saw blade width max. 200 mm Saw blade length max. 9300 mm Saw blade thickness 1.3 mm Saw blade speed approx. 42 m/sec. Drive power 45 kW, (1500rpm) Cutting feed requires. 22.5 m/min -Incl. electrical equipment, consisting of limit switches for saw blade voltage, path limitation for transverse movement -2 electromechanical width adjustment devices with precision spindle and two-stage special drive - designed for connecting a Fraba digitizer 2800 -2 hydro-pneumatic band saw roller brakes

Standard equipment Manual heavy duty band saw machine with hydraulic Sawframe reduction for miter cuts from 45 ° left to right 65° Saw frame made of sturdy cast iron construction Massive round table Oil bath gearbox consisting of bronze wheel with hardened and ground steel worm Carbide Guide and adjustable roller bearings Quick clamping Vice with additional quick adjustment and quick release lever Electric high-performance Coolant pump Mechanical blade tension with electric blade monitoring Control tool Free delivery including packaging

N E U M A S C H I N E! OUR MOST SOLD! Bandsaw HBS 470 400V 3 HP S 1 Cutting height of 290 mm 465 Mm cutting width 475mm solid wheels Precision roller guides 3454mm band length Work plate, swiveling Weight: ca. 180 kg G & HM-HBS470 SPECIAL PRICE NET OF 999.-

N E U M A S C H I N E! Bandsaw HBS 473 400V 3 HP S 1 Cutting height of 290 mm 465 mm cutting width 475mm solid wheels 3 rolls of precision roller bearings 3454mm band length Work plate, swiveling Weight: ca. 180 kg SPECIAL PRICE NET OF 950.-

Overhauled: 2018 Year of construction: 2001 Band saw blade 5800 x 41 x 1,3 mm Motor power approx. 11 KW with frequency control Cutting speed 20-170 m / min Square maximum work area: 430 x 430 mm Round maximum work area: 430 mm Section length 10-600 mm (~ 9999 mm multiple hub) Nachschubgeschw. Max 400 mm / s Weight approx. 4500 kg Dimensions Lxwxh 2910mm x3600mm x2200mm The machine is both technically and optically after completed retrofit in mint condition. A visit of this saw system is possible at any time. The machine will be overhauled in our House. Among other things, following points are renewed: -Modification on PLC control Siemens S7 -Renewal of the ball screw drive -New electric components -Renewal of the pneumatic pipes -New pneumatic components -Renewal of the hydraulic pipes -Overhaul and renewal of hydraulic components -Overhaul of cabin -Overhaul of  ...

Execution semiautomatic 90° diameter: 600 800 x 600 mm Engine: 14,5 kW Blade: 9000 x 67 x 1, 6 mm Min. diameter: 10 mm Working height: 630 mm Weight: 4.3 to.

Cutting area round / square 90°: 255 mm / 210 x 210 mm Cutting area flat 90°: 310 x 210 mm Cutting area round / square 45°, right: 220 mm / 210 x 210 mm Cutting area flat 45°, right: 220 x 200 mm Cutting area round / square 45°, left: 230 mm / 200 x 200 mm Cutting area flat 45°, left: 230 x 200 mm Cutting area round / square 60°, right: 135 mm / 135 x 135 mm Cutting area flat 60°, right: 135 x 135 mm Sawband dimensions: 2750 x 27 x 0.9 mm Cutting speeds: 35 / 70 m/min Motor recording power S6 40%: 2.2 kW Working height: 930 mm Delivery: - Saw band - Material stop - Manometer (band voltage) - Saw band hard metal guides - Vice with quick release - Integrated coolant equipment - Hydraulic iron lowering - Motor circuit breaker - Automatic final shutdown - Base

Standard equipment torsion-resistant, robust cast-iron saw frame driven shaving brush powerful industrial worm gear motor automatic shutdown after cutting end mechanical saw band tension with electrical band breakage monitoring Quick-release vice, movable Hydr. Saw frame lowering with rapid response function (infinitely adjustable) electric coolant pump Precision carbide saw band guides, ground (adjustable) large-sized round support table, with miter cuts, miter indicator (scale) to the operator side direct switching from manual operation to downing mode easily removable chip collecting tray Material stop 500 mm with scale incl. saw band combing gearing 4/6. Techniche Data Motor three-phase current 400 V, pole switchable 1.1/1.5 kW Saw band Dimensions 2720 x 27 x 0.9 mm Flywheels 300 mm Cutting speed 40/80 m/min. Vice-height span 275 mm Working height 978 mm Weigh ...

High-performance band sawing machine for cutting pipes and round material in multi-channel process with symmetrical material supply and discharge on both sides Manufacturer ZS-Technology Meissen Type MKS 6/2 Built in 1998 - 9 two-sided assignable pipe ducts - max pipe length 8,000 mm - Cycle time approx. 90 sec. / Stroke=5 sec. / pc. - max. section length 100 mm - Diameter 20 - 100 mm Materials Structural steels, C-steels, low-alloy steels, rolling bearing steel (especially 100Cr6) Pipe dimensions / pipe sections - Pipe outside 25 - 128 mm - Pipe wall thickness 3.2 - 16 mm - Pipe length 6,000 mm Required footprint for all components 7,000 x 16,200 mm Search terms: band saw machine, multi-channel band saw, backdrop band saw, high-performance band saw machine

Wheel diameter: 600 mm Cutting height: 380 mm cutting width: 570 mm Motor output: 2,2 kW Table dimensions: 810 x 590 mm table height: 905 mm voltage: 400 V / 50 Hz range L-W-H: 1120 x 750 x 2125 mm Weight: 275 kg Dust suction hood: 2 x 100 mm band speed: 1550 m/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wheel diameter: 500 mm Cutting height: 330 mm cutting width: 480 mm Motor output: 1,5 kW Table dimensions: 495 x 670 mm Table tiltable: 45 Grad The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wheel diameter: 700 mm Cutting height: 420 mm cutting width: 680 mm Motor output: 3 kW Table dimensions: 695 x 990 mm Table tiltable: 45 Grad Dimensions (L/W/H): 1260x840x2270 mm machine weight ab.: 400 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Delivery time immediately from stock! Motor three-phase current 400V with frequency converter (kW) 4.0 Table dimensions (mm) 600 x 600 Cutting width (mm) 400 Cutting height (mm) 390 Cutting speed (m/min) 50 – 1000 Band saw blade dimensions (mm) 3600 x 13 x 0.9 Machine dimensions without packaging (mm) 2225 x 1120 x 770 Weight (kg) 465 Standard equipment Precise drive controlled via a frequency converter Digital speed display Stepless belt speed Balanced intervertebral discs Hard rubberized treads Hardened and ground guide jaws LED task light Height-adjustable guide arm Machine colour RAL 7005 / RAL 7035 12-month warranty for single-shift operation

Technical data: -Saw blade size 300 mm -Blade rotation speed 2800 RPM -Section - 90 ° 160 x 20 mm 100 x 80 mm -at 45 ° 100 x 40 mm -Adjustable miter vise -Drive 380 V / 1,5 kW - space requirement approx. B H 400 x 1400 X 700 mm -Weight approx. 80 kg -with:-vert. -Vice - machine stand -Feed roller 2000 mm -Evacuation roller conveyor with MaÃ? attack with analog display via Handwheel movable 3100 mm

Technical data:-Roll diameter 420 mm -Throat depth 410 mm -Max volume height 265 mm -Table size 600 x 600 mm -Table li. + re. Tiltable 15 / 30 ° -Table height 1020 mm -Blade length 3150-3260 mm -Saw band width 3-16 mm -8 speeds 12-375 m / min -Drive: 400 V / 1.1 / 1.7 kW -Weight approx. 650 kg -Space requirement approx. B 900 x H 1900 X 1000 mm -with: - blade welding machine in the machine base - grinding wheel and lamp -Scissors, air pump and lighting

Cutting speeds: 40/80/min Mitre range: left up to 45° / right up to 60° The saw frame is brought to the starting position by hand. The lowering speed is controlled by a throttle valve (on the countersink cylinder) and as soon as the saw frame has reached the end position, the belt run switches off. You don't have to stand by the machine when sawing. The saw has an electric cooling water pump and a service has been carried out on the saw. The vice has a quick-release device Options: 1x saw blade 2720x27x0.9mm Number of teeth of your choice - from 5 saw blades 5% - from 10 saw blades 10% 5kg coolant concentrate 10kg coolant concentrate

Qty. 1 Second-hand vertical band saw Mfc.: Ermas Type: 8090 Built: 2003 Block before sawing Height: max. 500 mm Width: 340 – extendable to 500 mm Length: 340 – extendable to 500 mm Finished block dimensions: 380-500 x 150-160 x 150-160 mm – H x L x W Sawing band wheels (2) dia.: 1250 mm Band speed: 900 – 3500 m/min. Diamond coated sawing band: 41 x 1.3 x 8430 mm Blade motor power: 22 kW Blade tension: Hydraulic Lubrication: Water (closed circuit) Clamping: Hydraulic Cabin: Closed with automatic door Crops evacuation with manipulator: Hydraulic

- Minimum quantity spraying device (option) - Roller conveyor 400mm with intermediate plates and machined surfaces (option) for measuring stop - Additional support leg (option) - Attachment kit for fixed connection (option) - Measuring track with magnetic reading strip (option) - Stop, hand-operated, roller guide and digital display (option) - Saw blade dimensions: 3100 x 27 mm - Cutting range at 90 degrees around 250 mm - Cutting range at 90 degrees square 220 mm - Cutting area at 90 degrees rectangular 275 x 180 mm - Cutting range at 45 degrees around 200 mm - Cutting range at 45 degrees square 180 mm - Cutting area at 45 degrees rectangular 190 x 130 mm - Cutting range at 30 degrees around 130 mm - Cutting range at 30 degrees rectangular 125 mm - Cutting area at 30 degrees square 130 x 110 mm - Cutting speed 37/74 m/min - Hydraulic feed - Lifting brackets hydraulic ...

Semi-automatic, double-sided mitre band saw with turntable Swivel bracket design, mitre angle: 30°-90°-45° Material tension: hydraulic, saw bracket feed: hydraulic, Lifting bracket: hydraulic, speed: 37 / 74 m/min, belt dimensions: 3100 x 27 mm, 45°: round 240, square 240, rectangle 260x220 mm, 30°: round 190, square 180, rectangle 200x100 mm, saw feed infinitely adjustable via fine throttle, hydraulic material tension, opens and closes automatically, quick-release vise, can be used to the right or left of the belt, Ball-bearing turntable with grid and quick clamp for holding the saw frame, Particularly easy swivelling of the bracket, Large doors for easy belt change from the front, Manually stepless adjustment of the mitre angles, Material feed from the left or right possible Lifting bracket hydraulically, Automatic adjustment of the stirrup height according to material diame ...

Store number: 3418 BANDS�GEAUTOMAT Manufacturer: IMET, Type: X-TECH 410 Machinen NR.: 033476001, Built: 2003 Specifications: Size sawing capacity dia. 410 mm Total output 5.5 kW Hydraulic. CNC control. Saw male 6150 x 41 x 1.3 Length: 2000 mm, Høhe: 2200 mm, Width: 3500 mm, Weight: 3450 kg

Motor three-phase current 400V with frequency converter (kW) 3 Saw blade dimension (mm) 5200 x 34 x 1.1 Flywheels Ø (mm) 480 Cutting speed (m/min) 20 – 120 Wingspan (mm) 610 Working height (mm) 780 Machine dimension without packaging (mm) 2780 x 1440 x 1560 Weight (kg) 800 Standard equipment Ergonomically redesigned, robust welded frame construction for mitre cuts from 0° to 60° right/left Stable, low-vibration frame construction with arm joint mounted in plain bearings Clear control panel to the operator side Simple, easy-to-understand controls Precisely ground carbide saw blade guides (adjustable) for the highest demands on cutting accuracy Synchronously driven chip removal brush Semi-automatic sawing cycle: fully hydraulic Cutting feed hydraulically incl. automatic cutting pressure regulation Mitre adjustment and clamping (manual) Hydraulic Full Stroke Cylind ...

Cutting range 90°, round: 225 mm Cutting range 90°, square: 200 x 200 mm Cutting range 45°, round: 160 mm Cutting range 45°, square: 160 x 160 mm Cutting range 60°, round: 100 mm Cutting range 60°, square: 100 x 100 mm Saw band: 2480 x 27 x 0.9 mm Cutting speeds: 45 / 90 m/min Engine power: 1.5 kW Voltage: 400 V Delivery - BiMetal saw band 2480 x 27 x 0.9 mm, 6/10 ZpZ - Carbide guides (4 jaws) - Adjustable workpiece stop 0.5 m - Manometer for belt tension - Vice with quick release - Integrated coolant equipment - Hydraulic iron lowering - Motor circuit breaker - Automatic final shutdown - Base

Offer 24419 Specifications: - Roll diameter 520 mm - Projection 510 mm - Max. passage height 420 mm - Table size 750 x 800 mm - Table left + right swivel 15 / 30 ° - Table height from the floor 1020 mm - Saw blade length 4120 - 4200 mm - Saw band width 20 - 25 mm - Stepless cutting speed - level 1 18 - 160 m/min - Stage 2 240 - 2280 m/min - Pneumatic connection 6 bar - Drive 400 V / 5.5 kW - Weight approx. 1100 kg - Space requirement approx. W 1200 x H 2200 x D 900 mm - with: - table feed - Saw blade welder in machine stand -Grindstone - Scissors + air pump -Lighting

Kölle Band Saw BSM40 - With belt sanding and welding machine Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.