wolf kg 160 used for sale

; Power [PS]: 71; Gross weight [kg]: 1024; Engine: Perkins 1103A-33T; Accessories: Tanker, Battery, Control Panel; Water Tank Volume [l]: 145

MAX 20 X 1600

Manufacturer DMG Model DMU 160P Year 2002 CNC HEIDENHAIN iTNC-530 Table Table surface 1.500 x 1.250 mm. Max weight allowed on table 4.000 kg. Table turning range (C Axis) 0.001 º (Continuo) Travels and feeds Longitudinal travel (X Axis) 1.600 mm. Cross travel (Y Axis) 1.250 mm Vertical travel (Z Axis) 1.000 mm. Horizontal / Vertical Auto Indexing Head (A Axis) 0,001 º (Continuo) Rapid Traverse 60.000 mm/min Spindle taper SK-40 DIN 69871 Spindle speed 20-18.000 rpm Main spindle power 28 kW Equipment Automatic tool changer INCLUDED ATC positions 60 Coolant deposit capacity 200 l. HEIDENHAIN optical scales INCLUDED Chip conveyor INCLUDED Portable handwheel HEIDENHAIN HR-410 3D-Rot INCLUDED Tool touch probe INCLUDED M-function for internal / external lubricant INCLUDED Ready for internal coolant INCLUDED Mode 4 operation INCLUDED Others Positioning precisi ...

: ja weight of the machine ca.: 9,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Centrifugal pump with magnetic coupling.

Vacuum pump manufactured by STERLING SIHI GMBH in 2002. DRYB 160016 GT model.

pressure: 160 t throat: 360 mm stroke: 500 mm table surface area: 1250x630 mm ram surface: 1000x450 mm table height: 1000 mm dayligth: 800 mm weight of the machine ca.: 8 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

; Gross weight [kg]: 495; Engine: Perkins 403A-15G2; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 55

pressure: 40,0 t chamfer lenght: 1600 mm distance between columns: 1200 mm column arm: 200 mm ram stroke speed: 60,0 mm/sec return speed: 8,0 mm/sec work speed: 60,0 mm/sec work stroke: 100 mm table height: 760 mm table width: 150 mm oil volume: 130 ltr. voltage: 400 Volt Control: NC total power requirement: 4,0 kW weight: 3030 kg range L-W-H: 2050 x 1800 x 2030 mm Exhibition machine - like NEW () Furnishing: - compact hydraulic press brake - BERNARDO NC control model E21 - swiveling control panel - electrical adjustment of the backgauge - Back stop on recirculating ball spindles - electrical adjustment of the immersion depth - Laser protection device in front - Upper deer foot tool - divided - Tool holder with quick change system - Universal die block - side + rear protective device - 2x front support arms - movable double foot switch (operation) The data for this ad was created with ...

centre height: / mm chucking diameter: 200 mm hollow: 54 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Spiral Kneader Make: BOKU Model: SK160A with 1 extendable boiler - 100Kg flour / 160Kg dough - 2 speeds - 3 x 400V, 50Hz, 16kW - new electrics - in all areas, top outdated - further boilers available

Machine Type: TIG Welding Machine gas-cooled DC system Brand: Merkle Type TIG 160 DC Connection voltage 1 x 230 Volt Adjustment range 4 – 160 amps Duty cycle 35% ED at 160 amps 60% ED at 140 amps 100% ED at 120 amps Infinitely variable current adjustment max. weldable material thickness 4 mm Cooling system by built-in fan Cooling burner gas-cooled Design of portable assembly system Fuse protection 16 amps Dimensions L x W x H 560 x 230 x 480 mm Weight 17 kg Age approx. 25 years Optional accessories Connection for handheld and foot remote controllers Condition workshop-tested, good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece TIG torch ABL 17, 4 mtr. long 1 piece of ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box  ...

ALLMATIC LC 160/200

; Power [PS]: 24; Gross weight [kg]: 580; Engine: Perkins 404D-22; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: coolant heater and battery charger; Water Tank Volume [l]: 55

From linear to combination scales Application: Dosing free-flowing general cargo in accurate quantities. Characteristics of the scale • High accuracy • All parts in contact with the product are made of smooth 304 stainless steel • Simple operation, easy to clean and can be dismantled without tools • Control Panel: 7" Touch Screen • Low maintenance • Synchronization with all packaging machines possible Specifications • Number of weighing heads: 10 • Weighing container: 2,5l • Weighing range: 10 - 1000g • Accuracy: ± 1.0g - 1.5g • Speed: up to 60 sachets/min (depending on product) • Control panel: 7" touch screen display • Opening of the container flaps by means of stepper motors • Power: 230V / 1.3KW / 50(60)Hz / 10A • Dimensions (LxWxH): 1700mm x 1100mm x 1265mm • Machine weight: 380kg

- Exhibition unit - Filter generation motorized, mobile, suction side right or left, convertible, height reduction for transport possible ---------- Technical data ---------- Test mark: H3 / BGHM HO 143034, Suction nozzle: 1 x 140 / 160 mm, Nominal volume flow: 1,450 m³/h, Volume flow: 1,593 m³/h, Max. vacuum: 2,200 Pa, Filter area: 9.5 m², Residual dust content: < 0.1 mg/m³, Number of bags: 1 piece, Motor: 2.2 kW, Dimensions (LxWxH): 1,715 x 900 x 2,130 mm, weight: 324 kg, sound pressure level: 69 dW(A), dust class M: AWN 16 ; new exhibition machine

; Gross weight [kg]: 429; Engine: Perkins 404A-22G; Accessories: Tanker, Battery, Control Panel; Water Tank Volume [l]: 55

Inv. Num. : 5831 Type: PKnT 160 Producer: ERFURT Created: 1987 Parameters: Compressive force: 160 t Maximum stroke rate top table: 15 1/min Total power requirement: 21 kW Ram stroke: 265-425 mm Adjusting the plunger: 130 mm

Automatic angle grinder Meissner 160 with mixer Throughput depending on material type, speed, and cutting set Capacity: up to 10.000 kg/h Main motor power: 22 KW / 32 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 155 Lenght: 150 Height: 180 Delivery time: 30 working days after advanced payment

Excluding Box

Condition: Unused, in its original packaging Additional information Magnetic drilling machine Max. drilling diameter: 35 mm Power: 1600 watts Connection: 230 volts Magnet strength: 16000 newtons Speed: 830 rpm Drilling depth: 145 mm Includes: Oil reservoir for cooling and lubrication Security: Fall protection strap

Condition: Unused, in its original packaging Additional information Magnetic drilling machine Max. drilling diameter: 35 mm Power: 1600 watts Connection: 230 volts Magnet strength: 16000 newtons Speed: 830 rpm Drilling depth: 145 mm Includes: Oil reservoir for cooling and lubrication Security: Fall protection strap

IHI Transfer Press Model SL4-1600-450-220. With NC Feeder, Transfer System including Robots. New : 1984 Capacity : 1600 ton Stroke : 850mm Die height :1400mm Slide Adjustment : 500mm No. of Stroke : 16R.P.M Bolster Area : 4500 x 2200mm Clutch working Air Pressure : 4.5kg/cm2

bore capacity in steel (diameter): 50,0 mm arm length: 350 - 1.590 mm workpiece height max.: 645 - 1.240 mm turning speeds: 25 - 2000 U/min spindle taper MT: 5 MK base plate: 980 x 1.600 mm threading: 42 M quill stroke: 320 mm total power requirement: 4,0 kW weight of the machine ca.: 3.500 kg. range L-W-H: 2450 x 980 x 2840 mm Description : - Large-sized base plate - ideal for processing large workpieces - Thick-walled, polished column for increased sliding properties of the boom - Extension arm and drill head with independent hydraulic clamping - Simple height adjustment of the extension arm using a lifting motor - Ideal for drilling, countersinking, reaming and thread cutting - Hardened and ground gears, running in an oil bath - Good sliding of the drill head on the boom thanks to the ground surface scope of delivery : - Cube table - Reducing sleeves MK 5/4, MK 4/3, MK3 / 2 - LED mach ...

220V

consisting of Satzinger Hydro F160 strip steel decoiler, Müller BRM II L straightening machine with belt width 10-200mm & maximum belt thickness 3mm, hydraulic press with outlet to bending station, Wemo bending station, sloping discharge table, complete with fencing, hydraulic power units, control cabinet, total length of line approximately 24m, without dies

Radial Drilling Machine NOVISA NTR 1600 Spindle: CM5 Spindle exit Travel: 350 mm Spindle speed: from 25 to 1900 RPM Arm travel: 1600 mm Mini height in low position: 800 mm Max height in height position: 1500 mm Lubricant pump Voltage: 380 V Dimensions (L x W x H): 2600 x 1200 x 3000 mm Weight: approx 4 T

Used spiral kneader DIOSNA, Type: SP 160 D -As good as new- - up to 160 kg dough / approx. 100 kg flour - Plastic cover available on request - Condition: Very good, ready for immediate use The kneader is in very good condition and is immediately ready for use. Viewing and test run are possible by arrangement.

axis X x Y x Z x W: 3350x2510x1600x1600 mm 3 pcs plate 1500x4000x200 mm 1x table SKODA OB20281, diameter 1600x1600 mm, new in 1971 with tools, accessories and screw compressor weight of machine with table 47,5 ton refurbished 2010

Type: Stanko 1516 Max workpiece height: 1000 mm Vertical caliper max horizontal travel: 950 mm max vertical travel: 700 mm Horizontal caliper max horizontal travel: 630 mm max vertical travel: 1000 mm Crossbar max travel: 660 mm Chuck dia.: 1400 mm Max turningdia -- passage: 1600 mm Power on the spindle: 30 kW Number of speeds: 5 > 2 Long : 3170 mm Wide: 3030 mm Height: 4100 mm Weight: 20 ton

Condition: Unused, in its original packaging Additional information Magnetic drilling machine Max. drilling diameter: 35 mm Power: 1600 watts Connection: 230 volts Magnet strength: 16000 newtons Speed: 830 rpm Drilling depth: 145 mm Includes: Oil reservoir for cooling and lubrication Security: Fall protection strap

Condition: Unused, in its original packaging Additional information Magnetic drilling machine Max. drilling diameter: 35 mm Power: 1600 watts Connection: 230 volts Magnet strength: 16000 newtons Speed: 830 rpm Drilling depth: 145 mm Includes: Oil reservoir for cooling and lubrication Security: Fall protection strap

Machine Type Electrode Inverter Welding Rectifier with bi-power setup Merkle brand Type MobiARC 284 cel Plant No. 106.539 Connection voltage 230/400 volts Setting range 20 – 280 amps Duty cycle 35 % ED at 280 Ampere 60% ED at 240 amps 100% ED at 210 amps Current adjustment infinitely variable weldable material thickness 7 mm Cooling inverter by built-in fan Special accessories Bi-Power setup Version portable mounting system Fuse 16 amps Dimensions L x W x H 485 x 200 x 435 mm Weight 17 kg Age 6 years Condition workshop tested, good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece electrode cable 1 piece ground cable 1 piece hand shield 1 piece attachment glass 90 x 110 mm white 1 piece of protective glass 90 x 110 mm 10 DIN 1 pair of welder gloves with cuff 1 piece of ...

Condition: Unused, in its original packaging Additional information Magnetic drilling machine Max. drilling diameter: 35 mm Power: 1600 watts Connection: 230 volts Magnet strength: 16000 newtons Speed: 830 rpm Drilling depth: 145 mm Includes: Oil reservoir for cooling and lubrication Security: Fall protection strap

Unused, Automatic cooling system, drilling depth 210mm, adhesion force 16000 N, Speed up to N = 830 rpm, power 1600 kw,

Workshop caliper make MITUTOYO series 160Measuring length: 2050 mmInternal measurement from: 83 inchesBeak length: 180 mmMaterial thickness of nonius sheet: 40 x 12 mmWeight approx.: 10.2 kgOutside dimensions approx.: 2320 x 250 x 25 mmmade of stainless steelused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Unused, Automatic cooling system, drilling depth 210mm, adhesion force 16000 N, Speed up to N = 830 rpm, power 1600 kw,

T-slot clamping plate made of cast ironDimensions:Length: 1600 mmWidth: 1200 mmHeight: 200 mmWeight approx: 1400kgWith- 7 transverse T-slots 26/48xa0xa0 Distance 100/200 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Quality unchecked.

without welding cables

Condition: Unused, in its original packaging Additional information Magnetic drilling machine Max. drilling diameter: 35 mm Power: 1600 watts Connection: 230 volts Magnet strength: 16000 newtons Speed: 830 rpm Drilling depth: 145 mm Includes: Oil reservoir for cooling and lubrication Security: Fall protection strap

Excluding Box

Rolling, feeding and straightening machine make SCHLEICHER type RMS 8 - 53/160 - 1050Year of construction 1985Bandwidth: 250 - 90 mmStrip thickness: 0.5 - 0.8 mmDrive power: 7.7 kWNumber of Straightening Rollers: 8Diameter of straightening rollers: 53 mmWith- loop controlused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Above ground with sound-absorbing cab Speed: 50 - 90 strokes per minute including spout with additional sound attenuation

Hydraulic single column press make MAE type S-RH 160Max. Pressure: 160 tProjection: 360 mmStroke: 500 mmPressure piston diameter: 280 mmDrive power: 22 kWWeight approx: 10 tDimensions approx: 1800 x 1400 x 3000 mmWith- with horn dimensions: 720 long, 570 x 570 mm side lengthxa0xa0 with 1 T-groove on topused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Pneumatic Press Fabr. SMC Cylinder Type CDS 1 WFN 160-150-A51Built in 1987Pressing force: 150 kg = 9.9 kgf / cm²Stroke: 160 mmRam diameter: 50 mmDistance between the side uprights: 360 mmProjection: 150 mmInstallation height: 280 mmOutside dimensions approx: 450 x 350 x 800 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools