wmw veb used for sale

Standard holder and accessories, SASSEX twist drill knife, Sassex spiral drill knife, drilling knife, Sassex drill bit, Sassex holder, tool holder, holder for drill knife, twist drill bit -Number: 3x Sassex/WMW drill bits -Recording: MK6 -Overall length: 600 mm -Pin holder: Ø 12 mm -Distance pins: 77 mm -2x Sassex/WMW drill bits -Recording: MK6 -Overall length: 620 mm -Pin holder: Ø 16 mm -Distance pins: 96 mm -Price: for all 5 pieces -Weight: 56 kg

Machine vice, vice, drill press vice -Jaw width: 160 mm -Back height: 50 mm -Clamping depth: max. 105 mm -Dimensions: 460/163/H123 mm -Weight: 38.3 kg

4-jaw chuck, four-jaw chuck, lathe chuck WMW, ROTO RECORD DH 375 x 4-III TGL30-2332 n: max. 1100 rpm < br /> Outer Ø: 375 mm Centering Ø: 320 mm bolt circle Ø (chuck) : 345 mm bore Ø: 140 mm height with jaws: 137 mm with lathe chuck used, tested ! Dimensions ( lathe chuck ): 375 x 375 x 137 mm

Face plate diameter: 1.250mm Center height above foundation slab: 1,250mm Weight: 19t Power: 55Kw Max. torque on the face plate: 31,500Nm Maximum workpiece mass between centres: 16,000 kg Speed range: 2.24 – 224 rpm

Profile steel shears, hand lever shears, hand sheet metal shears, sheet metal shears, sheet metal shears -Scissors: 185 mm -cutting: 40 mm angle iron -cutting: Ø mm round steel -Dimensions: 460/985/H2220 mm -Weight: 88 kg

Automatic drill, drill press, drill press, stand drill, pillar drill -Spindle mount: MK 3 -Transmission -Automatic drill: with rapid traverse -Automatic drilling -Threading: automatic -Table size: 450 x 360 mm -Projection: 285 mm -Spindle stroke: 150 mm -Speed: 180-2000 rpm -Feed: 0.08-0.32 mm/rev -Dimensions: 900/1000/H2100 mm -Weight: 840 kg

Key data: 850 mm, 270 mm, 355 mm

Table width 315 mm, table length 1250 mm Tool holder SK 50 Speed range 28 - 1400 rpm Feed range 16 - 800 mm/min Travel x=850 mm, y= 270 mm, z=355 mm Connected load 8 kW Incl. Electric clamp horizontal Vertical head in X swivel with manual tightening Dispensing as present, no longer energized

Cutter mandrels, tool holder, with tightening thread WMW, VWF 40 x 22 x 315 ( 40x22x315 ) SK40 tool holder: Ø 22 x 315 mm used ! Dimensions: 468 x 63 x 63 mm

Type: UBR 25 x 2000-7 / 16 Manufacturer / make: WMW Wildau Baujahr / year: 1984 max. sheet width: 2000 mm max. sheet thickness ( St 50): 25 mm min. sheet thickness / min. sheethickness: 8 mm Number of straightening rollers: 7 rollers Weight of the machine / weight: 51 t

Cutter mandrel / tool holder, with tightening thread PAGUS / WMW PTFn-4/27/315 adapter ( machine side ): MK4 with female thread M20 x 2.0 Depth: 60 mm Tool holder: Ø 27 mm, length: 315 mm, groove width: 7 mm wrench size: 31 / 36 mm used, tested ! Dimensions: 475 x 41 x 41 mm

max. workpiece diameter: 500 mm threading length: 1250 mm max. module: 12 min. module: 0,5 total power requirement: 8 kW weight of the machine ca.: 4,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Moving centering point with tightening thread MK 5 Shipping within Germany without islands Euro 6.50

max. wheel diameter: 400 mm gear width: 275 mm gear width: 275 mm max. module: 6 weight of the machine ca.: 5,3 t shifting: 100 mm dist. cutter spindle - workpiece spindle: 40/265 mm hob turning speeds: 50-400 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Parallel Lathe WMW NILES type DLZ 500 IV L 1000 Between points: 1000 mm Maxi Ø on bench: 500 mm Maxi Ø over saddle: 300 mm Spindle diameter: Ø 50 mm Spindle speed: from 28 to 1400 RPM 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock CM4 Auto Feeds transverse + longitudinal + rapid Lubricant pump Voltage: 380 V Dimensions (L x W x H): 3000 x 1400 x 1500 mm Weight: approx 2,5 T

Pneumatic Grinder, Pneumatic Straight Grinder WMW Type 1804 17000 rpm Grinding wheel diameter: Ø 50 mm with approx. 1.6 m Connection hose used, tested ! Dimensions: 330 x 50 x 80 mm

tool taper: MK4 diameter of tools max.: Ø 145 mm table-size: L: 800 x B: 700 mm surface area: Ø 300 mm table travel: 200 mm total power requirement: 7,5 kW weight of the machine ca.: 4,9 t dimensions of the machine ca.: 2,8 x 1,5 x 2,3 m Additional information: Application: Gear hobbing machine for gear cutting of spur and helical gears, worm gears and rollable profiles Cycle milling and single milling as well as up-cut and climb milling Specifications for machining spur and worm gears: -Outer Ø max. 250mm with counterholder -pitch max. 5mm -Tooth helix max. 45° -Tooth width max. axial milling 200mm and radial-axial milling 240mm -Milling width max. clamping table counterholder 655mm Milling slide: -swivelling 210° -travelling distance 350mm -feed, 2 directions, 16 steps in the range 0.2 - 6.3 mm/revolution Further features: -counter-point taper MK4, co-rotating -Centre distance of  ...

Key data: 2000 mm, 10 mm

Sheet metal straightener, partially overhauled       sheet leveller, partly overhauled   Typ/ type:                                � �                                  � �              UBR 10 x 2000 /1-16 WDKS Manufacturer / make: WMW Gotha Year of construction/ year: 1989/2024 electrically overhauled max. sheet width: 2000 mm max. sheet thickness ( St 50): 10 mm    min. sheet thickness / min. sheethickness: 3 mm   Number of straightening rollers: 13 rollers / rollers Straightening roller diameter/diameter of     Straihgtening rollers: 145 mm Speed of straightening: 16 m / min Bale length / convexity length of rollers: 2330 mm Distance between b/n rollers centres: 150 mm Diameter of bottom rollers: 290 mm Number of bottom rollers / number of bottom rollers 21/24 Number of outr ...

Key data: 5000 mm, 4000 mm, 22000 mm

Flat top lathe with plate frame (heavy duty lathe) - Machine was overhauled in Italy in 2014 and stored directly - new electrics (control cabinet, cabling) - Max. turning diameter over the bed carriage 4000 mm - Max. turning diameter 5000 mm - Max. turning length: 22000 mm - Face plates speed range 0.9 - 56 1/min - Face plate diameter 4420 mm - Main motor power 30 kW - Max. torque at face plate 61803 Nm - Max. workpiece weight between tips: 20 t - Max. workpiece weight flying: 12.5 t -two bed slides with 4500 mm swivel length - complete with panel panels - a roller trestle - a tailstock After the overhaul, the lathe was no longer put into operation, but stored directly. The machine is dismantled and stored dry in a hall near Hamburg. The machine can be viewed by appointment. The machine is loaded free of charge with an indoor cran ...

max. workpiece diameter: 500 mm threading length: 1250 mm max. module: 12 min. module: 0,5 total power requirement: 8 kW weight of the machine ca.: 4,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear grinding machine ZSTZ 500x10 with change gears.

Key data: 500 mm, 300 mm, 5

I am selling a well-used gear milling machine from WMW Modul, model ZFWZ 500x5. The machine is fully functional and runs without any problems. The foot (coolant device) and the entire machine were completely cleaned. The connection cable and plug were replaced. When sold, the entire oils are renewed. Largest wheel diameter is 500mm Largest module is 5. The weight of the machine is 1950kg. Incl. complete, original cabinet with interchangeable wheels and an instruction manual. The machine has already been overhauled. The guides show almost no signs of wear. If you have any further questions, please do not hesitate to contact us. The machine can be viewed and tested under power by prior appointment. On-site loading is no problem and free of charge. The sale is without guarantee and warranty. Returns are excluded. All information is subject to change.

max. workpiece diameter: 250 mm threading length: 800 mm max. module: 8 min. module: 1 total power requirement: 10 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 3,05x1,75x1,60 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 250 mm, 500 mm

Circulation diameter over bed 500 mm Max. turning length 1,600 mm Connected load 5.5 kW Machine weight 4.4 t

Key data: 2500 mm, 16 mm

Machine type: sheet leveller Stock number: 0997 Make: WMW GOTHA Type: UBR 16 x 2500 /1-10 Year of construction: 1976 Sheet width: 2500 mm Sheet thickness: 16 mm Smallest sheet thickness: 6 mm Number of straightening rollers: 11 Roller diameter: 180 mm Straightening roller diameter: 180 mm Target speed: 10-16-20 m/min Flow speed: 10 m/min Total power requirement: 75 kW Machine weight approx.: 46 t

Angle Milling Head, Angle Head, Milling Head, Drill Head WMW, WERKZEUGBAU DOBERSCHAU App. 252 Tool holder: MK2 1 spindle stroke: 35 mm drive plate: Ø 72 mm, 2x drive groove, width: 16 mm flange: Ø 146 / 100 mm bolt circle diameter: Ø 120 mm hole diameter: Ø 13.5 mm accessories for RUHLA milling machine used, tested ! Dimensions: 295 x 145 x 135 mm

3-jaw chuck, three-jaw chuck, lathe chuck WMW, NILES DH-W/5-160 x 3 TGL30 2332 outer Ø: 160 mm bore: Ø 42 mm speed: max. 3600 rpm centering Ø: 78,5 / 82.5 mm, depth: 17 mm ( conical ) bolt circle Ø (chuck) : 105 mm 4x threaded hole: M10 x 1.5, depth: 30 mm height with jaws: 106 mm including chuck wrench, second set of jaws and 4 mounting screws New, preserved ! dimensions ( lathe chuck ): 160 x 160 x 106 mm dimensions ( packaging ): 180 x 180 x 110 mm

4-jaw chuck, four-jaw chuck, lathe chuck WMW, NILES DH-W/5-160 x 4 TGL30 2332 outer Ø: 160 mm bore: Ø 42 mm speed: max. 2900 rpm centering Ø: 78,5 / 82.5 mm, depth: 17 mm ( conical ) bolt circle Ø (chuck) : 105 mm 4x threaded hole: M10 x 1.5, depth: 30 mm height with jaws: 106 mm including chuck wrench, second set of jaws and 4 mounting screws New, preserved ! dimensions ( lathe chuck ): 160 x 160 x 106 mm dimensions ( packaging ): 180 x 180 x 110 mm

3-jaw chuck, three-jaw chuck, lathe chuck WMW, NILES DH-W/8-250 x 3 TGL30 2332 outer Ø: 250 bore: Ø 80 mm speed: max. 2400 rpm centering Ø: 135 / 139 mm, depth: 19 mm (conical) bolt circle Ø (chuck) : 170 mm 4x threaded hole: M16 x 2.0, depth: 32 mm height with jaws: 129 mm including chuck wrench, second set of jaws and 4 mounting screws New, preserved ! dimensions ( lathe chuck ): 250 x 250 x 129 mm dimensions ( packaging ): 260 x 260 x 140 mm

turning diameter over bed: 400 mm turning diameter over slide rest: 200 mm turning length: 1500 mm turning diameter in the gap: mm turning speeds: 28 - 1400 U/min centre height: 200 mm spindle bore: 50 mm total power requirement: 10,4 kW weight of the machine ca.: 2,85 t dimensions of the machine ca.: 3,5 x 1,4 x 1,6 m Center lathe - Rapid traverse - Faceplate 400mm - Multifix steel holder - Coolant system - Feed protection - chip trays - Chip protection wall - Emergency stop facility - Machine light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 2500 mm material thickness: 16,00 mm no. of straightening rolls: 11 sheet thickness - min.: 6,00 mm straightening roll diameter: 180 mm straight. speed ca.: 10-16-20 m/ min bending speed: 10 m/min total power requirement: 75 kW weight of the machine ca.: 46 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine vice WMW SX/1-160 TGL 34180 jaw width: 160 mm jaw height: 48 mm wingspan: 0...200 mm New ! dimensions ( machine vice ): 505 x 160 x 135 mm

Inv. Num. : 7283 Type: PME 315 T Producer: WMW Generated:- Parameters: Compressive force: 315 t Table length: 2220 mm Table width: 1225 mm Maximum stroke rate per minute: 75 1/min Plunger adjustment: 130 mm

Centering vice, machine vice WMW SZ 160 jaw width: 160 mm jaw height: 48 mm wingspan: 0...200 mm used, tested ! Dimensions ( machine vice ): 505 x 160 x 117 mm

Shell end milling cutters, milling cutters, milling cutters, shell milling cutters -Manufacturer: WMW, shell milling cutter, shell end milling cutter type N 9960 -Size: 160x63x50mm -Receptacle: Ø 50 mm -Dimensions of box: 175/175/H100 mm -Weight: 5.9 kg

Milling head, drill head, angle head WMW Tool holder: SK40 with collet chuck size 25 360 ° rotatable in two planes shaft ( Drive , machine side ): SK50 shaft ( drive, milling head side ): Wedge hub profile 8 x 36 x 42 x 8 ( TGL 0-5472 ) flange: Ø 260 mm / 397 x 339 mm hole spacing: 365 / 175 mm 4x Bore: Ø 19 mm used, tested ! Dimensions: 400 x 390 x 600 mm

diameter: 200 mm amount: 6 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tool holder, milling holder, milling tool, long milling arbor -5x recordings: SK50 -3x diameter: Ø 40 x 1010 mm -1x diameter: Ø 32 x 1000 mm -1x diameter: Ø 27 x 830 mm -Sale: only complete -Weight: 109kg

max diam 250 , max modul 5

Machine vice WMW Model: SX 160 jaw width: 160 mm jaw height: 50 mm wingspan: 0...200 mm on table with graduation 2 levels 360° rotatable 90° tilting New ! Dimensions: 510 x 290 x 240 mm

Key data: 250 , 400 , 10

The machine needs to install the new electric system Specification: Work table diameter 580 mm Gear diameter 630- 710 mm Gear width 400 mm Module range 1-10 Max. axial feed travel 400 mm Max. tangential feed travel 200 mm Max. helix angle 45 degrees Min. number of teeth hobbed 10 Min. number of teeth hobbed (indexing drive) 5 Max. hob diameter 200 mm Max. hob length 250 mm Diameter of hole in table 100-250 mm Depth of hole in table 45-300 mm Distance center of hob to table 175-575 mm Distance center of hob to center of table 50-505 mm Driving taper for hob arbor (step taper) 50 mm Hob speeds of universal hobbing head steeped 50-400 rpm Milling spindle speeds 40-400 rpm Axial feeds 0,2-10 mm/rev Tangential feeds 0,1-5 mm/rev Radial feeds 0,1-1 mm/rev Main motor capacity 29 kW Direct current 10 kW Machine dimensions 3380x2715x2250 mm Machine weight 9200 kg

WMW SI 4/1 Internal Grinding Machine YOM 52/1999 VEB Berliner Werkzeugmaschinenfabrik Grinding diameter 5-250 mm Max. grinding length 250 mm Max workpiece dia 370/450 mm (with/without safety cover) Spindle head speed 35-1400/min Work piece spindle speed 70-775 mm Max. table travel 560 mm Table speed stepless 0,5-6 m/min. Total power 16,5 kW Total Dimensions 3300x1440x2000 mm Machine 2200x1400x2000 mm Weight 4.8t.

Clamping drive, clamping force generator, electric WMW EDU I80 DR speed: 80 rpm torque ( adjustable in 8 steps ): 20 - 120 Nm engine: KMRB 71 K 4 E 0,55 kW 1380 rpm 220 / 380 V 3AC hollow shaft: Wedge hub profile 4 x 18 x 22 x 6 ( TGL 0-5471 ) bolt circle diameter: Ø 90 mm, 4x threaded hole M8 x 1.25 used, tested ! Dimensions: 280 x 130 x 170 mm

Key data: 20 mm

I am selling a well used, fully functional, bench drill from WMW model BT 2. Technical data for the machine are : Recording: MK2 Drilling stroke: approx. 100mm Max table spindle spacing: approx. 440mm Weight: 165kg. Table surface: 340mm x 280mm LxWxH: approx. 600mm x 500mm x 1300mm Incl. lighting and instruction manual. The oil has been changed. Incl. new drill chuck. The table is in good condition. Nothing is drilled. The machine can be viewed and tested under power by prior appointment. If you have any questions, just get in touch. Shipping, on pallet, is not a problem. Please inquire about shipping costs with postal code. On-site loading is possible without any problems. The sale is without guarantee and warranty. Returns are excluded. All information is subject to change.

max diam 340 , max modul 8

max. workpiece diameter: 500 mm threading length: 1250 mm max. module: 12 min. module: 0,5 total power requirement: 8 kW weight of the machine ca.: 4,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 11000 mm y-travel: 2.500 mm workpiece height: mm table width: mm table length: mm weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: 36 mm square edge steel: 30 mm L-beam: 100x10 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 8000 mm y-travel: 2.500 mm workpiece height: 2.360 mm table width: 2.240 mm table length: 10.100 mm weight of the machine ca.: t dimensions of the machine ca.: 20,0 x 8,5 x 5,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Fabrication number: 10210 Operating voltage: 380 V Control voltage: 220 V Connection: 3.0 kW Rated current: 7 A Table dimensions: 450 x 360 mm With 3 grooves Attention: without the machine vice shown in the photos Spindle speed: 180 - 2000 rpm weight approx.: 700 kg, Approx. Onsite Dimension. (l x w x h): 850 x 600 x 2,100 mm

Clamping actuator, clamping force generator, electric, with reversing switch WMW EDU I80 F/M1 speed: 80 rpm torque ( adjustable in 8 steps ): 20 - 120 Nm engine: KMRB 71 G 4 E 0,75 kW 1380 RPM 220 / 380 V 3AC Hollow Shaft: Wedge hub profile 4 x 18 x 22 x 6 ( TGL 0-5471 ) Bolt circle diameter: Ø 90 mm, 4x threaded hole M8 x 1.25 used, tested ! dimensions: 280 x 130 x 190 mm