wmw press used for sale

Frame press Hess Type VARIANT Machine No. 2182 Built in 1979 Pneumatic Frame Press Workspace 3700 mm x Height 2300 mm 4 bars with pressure cylinders from above Stop side left 1 movable pressure bar from the right with 2 pressure cylinders Cylinder stroke 110 mm Compressive force per cylinder 1100 kp (1kp = 1kg) Compressed air connection max. 15 bar Weight approx. 550 kg Exterior Dimensions 4400 mm x 700 mm x H 2800 mm Loading dimensions 4400 mm x 600 mm x H 2300 mm + Pallet with pressure beam 2800 mm x 800 mm x H approx. 700 mm

Machine data: Press force: 3,000kN Roller diameter: 850mm Working width: 400mm Briquette dimension: 38 x 32 x 16mm Briquette volume with 4mm gap: approx. 16cm³ Briquette weight: approx. 38g Throughput capacity: 30,000kg/h Rated speed: 17.9/min Circumferential speed: 0.79m/s

Eccentric shaft by drawing K04.038.842-22-402 for hot stamping press K04.038.842 (K8542), 1600T brand new in state stale from stock W 4675 kg

with 63 filling valves and 16 head crown corker 26 mm with double pre-evacuation system Work direction: from right to left Product: beer and other products with CO2 Capacity: approx. 25.000 bph - by 500 ml bottles approx. 30.000 bph - by 350 ml bottles More technical details you can see on the technical data sheet. Complete documentation, manual, spare part list, electrical documentation are available. The filler was in production in a Germany brewery and can be inspected on side.

Manufacturer: Wemhöner, Year: 1994, Type: Membranepresse, Number of tables: 2, Automatisches Rüsten: no, Pin-Sytem: no, Heating system: Thermoöl, Max.Teilegrösse mm: 3.200 x 1.300, Work piece width min-max mm: 1.300, Min.-max. workpiece length in mm: 3.200, Min.-max. workpiece height in mm: 10 - 50, Membrane: yes, Durchmesser Presskolben: ca 180, Placing table: 2, Membrane: yes, Pressing cylinder: 5, Landing opening mm: 220, Automatische Entleerung: yes, Folienschneidmaschine Hersteller: yes, Folienkalander: 16 Rollen, Foil cutter: 2, Year :1994

Manufacturer: Simmpianti, Year: 1998, Longitudinal through running press: yes, Stages: 1, Work piece width min-max mm: 2700 mm X 3200 mm, Min.-max. workpiece height in mm: 3-80, Press length mm: 3200, Pressing width mm: 2700, Press power kg /cm²: 4-6, Warmwasser beheizt: yes, Feeding: yes, Automatical glue supply: yes, Veneer applicaition table: yes, Through running machine: yes, Destacking: yes, Year :1998

Manufacturer: Sergiani Querdurchlaufpresse Warmwasser, Type: GSA, Year: 2009, Durchlauffunierpresse: yes, Dimensions of heating plate approx. mm: 3500 X 1300, Number of storeys: 1, Cylinder stroke: 350, Charging side: Quer, Landing opening mm: ca.350, Steel heating plates: yes, Min-max temperature: 0-120, Heated by: Warmwasser, Overall pressure kN: ca.4 kg²cm, Press length mm: 3500, Pressing width mm: 1300, Transport roller conveyor: yes, Thermoilpumpenstattion: yes, Lateral press: yes, Belt conveyor: yes, Year :2009

Manufacturer: Istel, Type: Korpussprese Nischen schränke, Year: 1992, Korpuspressen-Montagelinie: no, Work piece width min-max mm: 250-550, Min.-max. workpiece length in mm: 500-2500, Min.-max. workpiece height in mm: 150-350, Working widht max mm: 550, Working width min min mm: 250, Hydraulical/pneumatical: Hydraulisch, Floors and sides: 10 Böden wählbar, Year :1992

GRP 250to year 2000 Needle bearing to screw shaft defective, machine stopped. Find more here - / Contact us at -

Manufacturer: Hess , Type: Centro, Year: 2000, Hydraulical/pneumatical: yes, High / low pressure: yes, Press length mm: 3050, Press height in mm: 2200, Press depth mm: 100, Cylinder vertical: 2, Cylinder horizontally: 2, Vertikaldruckzylinder: 2, Haltezylinder zum Fixieren der Hölzer: yes, Mitteldruckbalken: no, Querdruckeinrichtung: yes, Funk-Handpanel: Handpanell, Elektronische Einzeldruckregelung (zum Verpressen von Kreuzsprossenfenster): yes, Year :2000

Manufacturer: Bürkle , Type: S80 2200x1250, Year: 1985, Stages: 3, Lateral press: yes, Dimensions of heating plate approx. mm: 2200 X 1200, Number of storeys: 3, Cylinder stroke: ca.500, Charging side: quer, Landing opening mm: ca.150, Steel heating plates: yes, Heated by: Warmwasser, Rückzylinder N/cm2: ca. 4, Number of pressing cylinders: 4, Longitudinal through running press: 2200, Time switch: 1200, Year :1985

Pressing and joint-setting machine Book height : 100 - 520 mm Book width : 120 - 450 mm Book thickness : 6.5 - 100 mm Output : approx. 150 books/hour (depending on the material used)

Manufacturer: Bürkle, Type: U110 , Year: 1990, Stages: 3, Lateral press: yes, Heizplattenmasse ca.mm: 3000x1300, Anzahl der Etagen: 3, Zylinderhub mm: ca.400, Beschickungsseite: längs, Landing opening mm: ca.100, Heizplatten aus Stahl: Stahl-Aluminium, Temperatur min-max: 150, Heated by: Warmwasser, Gesamtdruck KN: 1100, Anzahl der Presszylinder: 8, Time switch: yes, Press length mm: 3000, Pressing width mm: 1300, Year :1990

Manufacturer: Wemhöner Membranenpresse, Year: 1996, Type: KT-VP 28, Number of tables: 1, Automatisches Rüsten: no, Pin-Sytem: no, Heating system: Elektro, Nutzfläche : 2500 X 1300, Min.-max. workpiece length in mm: 2500, Min.-max. workpiece height in mm: 10--60, Working widht max mm: 1300, Press length mm: 2500, Pressing width mm: 1350, Kw Heizleistung obere Heizplatte: yes, Max. temperature °C: 220, Foil magazin spaces: 8, Veneer/ foil thickness max mm: möglich, Through running machine: yes, Folienpaternoster: yes, Through running machine: yes, Year :1996

Manufacturer: Friz, Year: 1996, Type: MFP 12 Masterform, Number of tables: 1, Heating system: elektrisch, Nutzfläche : 1.100 x 2.400, Press length mm: 1.400, Pressing width mm: 2.700, Work piece thickness max mm: 300, Membrane: yes, Kw Heizleistung obere Heizplatte: oben 24 + unten 11, Membrane: yes, Size of heating plate mm: 1.400 x 2.700, Pressing cylinder: 6, Landing opening mm: 315, Overall pressing pressure kN: 320 bar, Weight approx. kg: 20.000, Year :1996

Manufacturer: Itallpress, Type: GL 120, Stages: 1, Heizplattenmasse ca.mm: 500 X 1200, Anzahl der Etagen: 1, Zylinderhub mm: 310, Beschickungsseite: quer, Landing opening mm: 320, Heizplatten aus Stahl: yes, Temperatur min-max: ca.140, Heated by: Elektro, Spezifischer Druck: 400 Tonnen, Press length mm: 1200, Pressing width mm: 500, Number of cylinders: 4 /Durchmesser 150, Zykluszeit mm: 320, FREE TEXT: Verlademasse 1200 X 2100 X 2870 mit Ölbehälter 24000 ohne Behälter/Hydraulik Kw 5,5,

Manufacturer: Sergiani, Type: LAS 230, Year: 1999, Stages: 10, Heizplattenmasse ca.mm: 2500x1300, Anzahl der Etagen: 10, Heated by: Warmwasser, Press length mm: 2500, Pressing width mm: 1300, Press power kg /cm²: 7,69, Electrically heated kW: 21, Work piece thickness max mm: 80, Year :1999

Manufacturer: unbekannt, Type: Rahmenpresse, Min.-max. workpiece length in mm: 150-2500, Min.-max. workpiece height in mm: 10-40, Working widht max mm: 2500, Hydraulical/pneumatical: pneumatisch, High / low pressure: niederdruck, Cylinder vertical: 4 pro Seite, Cylinder horizontally: keine, Vertikaldruckzylinder: 8, Clamping: no, FREE TEXT: Zylinderdurchmesser 70/ Zylinderhub 100 mm,

Pressing force: 2000kN, max. installation height: 550mm, total power requirement: 72kW, operating pressure: 210bar. Including feed unit. On-site inspection is possible.

Manufacturer: Italpresse, Year: 2005, Type: Lock Form SS AIR , Work piece width min-max mm: 1330, Min.-max. workpiece length in mm: 2680, Min.-max. workpiece height in mm: 55, Heating system: elektrisch, Max. temperature °C: 150, Placing table: 2, Size of heating plate mm: 1450 x 2800, Pin system: no, Multifunktionsrahmen: yes, Automatical glue supply: yes, Year :2005

Press force: 160t, stroke adjustment: 20mm-140mm, stroke rate: 10-60 strokes/min, table dimensions X/Y: 1050mm/820mm, opening in table: 300mm/300mm, ram adjustment: 100mm. On-site inspection is possible.

Manufacturer: Comil, Type: Astro 700, Year: ca.1990, Hochschränke und Hänger: 680, Work piece width min-max mm: 300 - 2500, Min.-max. workpiece length in mm: 300 - 1300, Min.-max. workpiece height in mm: 800, Working width min min mm: yes, Hydraulical/pneumatical: yes, Min.-max. pressing length in mm: 1300, Cylinder horizontally: no, Pre-assembling conveyor: 22,5, Feeding speed continous adjustable: jyes, Discharge belt roller conveyor height: 7, Machine rigging: 2860, Press power kg /cm²: 7500, Year :ca.1990

Manufacturer: Italpresse, Year: 2000, Type: Lock Form SS AIR , Control: 1330, Number of tables: 2680, Automatisches Rüsten: 55, Work piece width min-max mm: elektrisch, Min.-max. workpiece height in mm: 150, Press length mm: 2, Membrane: 1450 x 2800, Foil magazin spaces: no, Foil types: yes, Brushing machine: yes, Year :2000

Manufacturer: Comil, Type: Astro 700, Year: 1990, Work piece width min-max mm: 680, Min.-max. workpiece length in mm: 300 - 2500, Min.-max. workpiece height in mm: 300 - 1300, Working widht max mm: 800, Hydraulical/pneumatical: yes, High / low pressure: yes, Min.-max. pressing height in mm: 1300, Pre-assembling conveyor: no, Feeding speed max m/min: 22,5, Glazing tape: jyes, Connected load in kW: 7, Machine height mm: 2860, Machine width mm: 7500, Year :1990

Manufacturer: Wemhöner, Year: 1997, Type: KTV 28/15 - 165, Work piece width min-max mm: 1500, Min.-max. workpiece length in mm: 2800, Min.-max. workpiece height in mm: 10-40, Max. temperature °C: 90 / 180, Placing table: yes, Through running machine: yes, Pressing cylinder: 6, Pin system: no, Landing opening mm: 1, Foil cutter: yes, Through running machine: yes, Year :1997

Compressive force: 1000kN/100t, ram stroke: 200mm, max. operating pressure: 290bar, control: DNC70, safety distance: 166mm, overtravel time: 104ms, overtravel distance: 7mm.

Manufacturer: Italpress, Type: GL 260 PS 5, Stages: 1, Lateral press: yes, Anzahl der Etagen: 1, Zylinderhub mm: 450, Beschickungsseite: Quer, Heizplatten aus Stahl: yes, Heated by: Elektro, Spezifischer Druck: 700 Tonnen, Anzahl der Presszylinder: 5/Durchmesser 300 mm, Schliessgeschwindigkeit mm./Sek: 2 Stufig, Press length mm: 1600, Pressing width mm: ca.600, Press power kg /cm²: 40-50,

An old Künstner & Hampel eccentric press is available. Pressure capacity: 25 tons, power requirement: 2.5 HP. On-site inspection is possible.

Manufacturer: Himmel Hochfrquenz Presse, Year: ca.1993, Work piece width min-max mm: 20-150, Min.-max. workpiece length in mm: egal, Min.-max. workpiece height in mm: 6-40, High / low pressure: yes, Vertikaldruckzylinder: yes, Horizontaldruckzylinder: yes, Haltezylinder zum Fixieren der Hölzer: yes, FREE TEXT: Hofrequenz für Rahmenteile, Year :ca.1993

A high-performance cold press is available for pre-pressing diamond segments in tools. Main cylinder: 2, cylinder diameter top/bottom: 100mm/100mm, cylinder stroke top/bottom: 180mm/150mm, max. operating pressure: 300bar, press force: 235kN. Die clamping cylinder: 2, piston diameter: 63mm, cylinder stroke: 15mm, max. clamping force: 62kN, max. operating pressure: 200bar, piston area: 31.2cm². Weighing stations: 2, weight range: 1g-50g, accuracy: +/-0.05g, powder hopper volume: 12l. Machine dimensions X/Y/Z: approx. 1800mm/1000mm/1900mm, weight: approx. 2000kg. Documentation available. On-site inspection is possible.

Manufacturer: Italpresse, Year: 2002, Type: Lock Form SS AIR , Work piece width min-max mm: 1330, Min.-max. workpiece length in mm: 2680, Min.-max. workpiece height in mm: 55, Heating system: elektrisch, Max. temperature °C: 150, Placing table: yes, Size of heating plate mm: 1450 x 2800, Pressing cylinder: 2, Pin system: yes, Automatical glue supply: yes, Year :2002

Max. Press force: 1000kN, max. retraction force: 110kN, max. stroke: 360mm, max. working pressure: 251bar, installation height: 560mm, control panel: Siemens SIMATIC OP27, weight: 7.5t, on-site inspection is possible.

Manufacturer: Igomak, Type: T 450, Year: 1976, Hydraulical/pneumatical: Hydraulisch, Press depth mm: 500, Press length mm: 1000, Press press opening max mm: 450, Number of cylinders: 3 Zylinder 180 mm Durchmesser, FREE TEXT: Heizplatte oben/ 7,5 Kw Leistung, Year :1976

Four Neff single-column presses are available. 1) Neff T 6.3, year of manufacture: 1989, output: 3kW. 2) Neff single-column press, operating hours: 9097h. 3) Neff EP 10 single-column press, year of manufacture: approx. 1950. 4) Neff single-column press. On-site inspection is possible.

Manufacturer: Dimter , Type: Profipress 3500, Year: 2003, Continuous flow system: yes, Work piece width min-max mm: 300 - 3500, Min.-max. workpiece length in mm: 1300, Min.-max. workpiece height in mm: 11 - 60, Hydraulical/pneumatical: yes, High-frequency: yes, Warm water: yes, Thermoöl: yes, High / low pressure: yes, Cylinder vertical: yes, Cylinder horizontally: yes, Pre-assembling conveyor: yes, Glue application machine: yes, Clamping: yes, Disc saw transverse: yes, FREE TEXT: 2800 Betriebsstunden, Year :2003

Manufacturer: Italpress, Type: Mark/C, Year: 2000, Program: yes, Control: Siemens, Longitudinal through running press: yes, Stages: 1, Press length mm: 3400, Pressing width mm: 1200, Press power kg /cm²: 6, Zylinder: 8, Inlet conveyor: yes, Warm water heated: yes, Work piece thickness max mm: 100, Through running machine: yes, Belt conveyor: Auslauf, Year :2000

Working dimensions X/Y: 3000mm/2000mm, cylinder stroke: 1000mm, height adjustment: 2000mm-2600mm, length adjustment: 3000mm-6000mm, pressing force: 2t, space requirement: 4100mm/1000mm/2450mm, weight: approx. 1500kg. Documentation available. On-site inspection is possible.

Manufacturer: Imotech, Type: IMO 324, Year: 1997 ca., Body presses assembly line: yes, Work piece width min-max mm: 650, Min.-max. workpiece length in mm: 2500, Min.-max. workpiece height in mm: 2000, Pre-assembling conveyor: 3 m, Glazing tape: 3 m, Press: IMO 324, FREE TEXT: einschl. Puffer, Querförderer und Rückführung , Year :1997 ca.

FETTE Terminal Data Control Type 2080 Year 1989

Manufacturer: Limatech, Type: MPS 20, Year: 1998, Work piece width min-max mm: 800, Min.-max. workpiece length in mm: 2500, Min.-max. workpiece height in mm: 1300, Feeding speed max m/min: ca. 30, Feeding speed continous adjustable: yes, Machine rigging: automatisch, Compressed air bar: 6, Wight approx. kg: 3000, Year :1998

FETTE Data Control 2 Installed in a mobile cabinet including an EPSON printer

Manufacturer: Hess, Type: Speedy Quick Step, Year: 1995, Min.-max. workpiece length in mm: 3500, Min.-max. workpiece height in mm: 2500, Working widht max mm: 600, Hydraulical/pneumatical: hydraulisch, High / low pressure: Hochdruck, Cylinder vertical: 3, Cylinder horizontally: 2, FREE TEXT: Automatisches Verfahren der Balken und Lanhhubzylinder für vertikale Bewegung, Year :1995

Press capacity: 50 ton Ram stroke: 54 mm Slide adjustment: 80 mm Shut height (stroke down, adjustment up): 303 mm Table surface area : 810 x 550 mm Number of strokes: 65 - 400 s.p.m. Weight of machine approx.: 7,5 ton Main Motor: 11 kW

Manufacturer: Homburg, Type: Korpusspresse, Year: ca.1980, Work piece width min-max mm: 250-600, Min.-max. workpiece length in mm: 300-3500, Min.-max. workpiece height in mm: 400-1500, Hydraulical/pneumatical: Pneumatisch, Cylinder vertical: 4, Cylinder horizontally: 2, Machine rigging: hand, Year :ca.1980

A dismantled Mecamaq hydraulic press is available. Pressing force: 100t, max. pressure: 290bar, main piston diameter: 200mm/120mm, auxiliary cylinder diameter: 40mm/25mm. Main cylinder working stroke: 500mm, max. installation height: 800mm, working height: 800mm, effective dimensions X/Y: 700mm/500mm, table dimensions X/Y: 800mm/500mm, working speed: 6mm/s, return speed: 150mm/s. Max. tool dimensions X/Y: 800mm/600mm, max. tool weight: 1000kg. Machine dimensions X/Y/Z: approx. 1000mm/1350mm/2750mm, weight: approx. 4000kg. Documentation available. On-site inspection is possible.

fabric-no.: 202 395 working length: 2550 mm output: 2000 KN tracking travel: 13 mm safety distance: 176 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Metapress, Year: 2008, Min.-max. workpiece length in mm: 300-1200, Min.-max. workpiece height in mm: 300-600, Hydraulical/pneumatical: Pneumatisch, High / low pressure: Niederdruck, Cylinder vertical: yes, Cylinder horizontally: yes, Inserted table: yes, Press power kg /cm²: 2, Wight approx. kg: 700, Year :2008

Manufacturer: Bürkle, Year: 1997, Type: BTF 1426, Work piece width min-max mm: 1100, Min.-max. workpiece length in mm: 2350, Min.-max. workpiece height in mm: 6-35, Working widht max mm: 1180 X 2430, Heating system: Thermoöl, Heating power in kW: 25, Foil magazin spaces: 10, Placing table: 3, Through running machine: yes, Folienschneideeinrichtung: yes, Through running machine: yes, Year :1997

pressure: 63 t distance between columns: 650 mm stroke: 200 mm total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Mepac , Type: 20-18S, Year: ca.2002, Control: Programm, Hydraulikal power kW: 4, Ballenpresse: yes, Pressdruck kN/ to: 18 to, Einfüllöffnung b x h x L mm: 1080620980, Zylinderhub/Zycluszeit mm/ sec: 715/25, Ballenmass b mm x l mm x h mm : 1100700800, Ballengewicht kg: 150-250, Ballen 80 - 230 kg , Year :ca.2002