wmw meuselwitz used for sale

3-jaw chuck, three-jaw chuck WMW DH-B 200x3x6 ( DH-B200x3x6 ) TGL 30-2332 Outer Ø: 200 mm Bolt circle Ø : 133.5 mm Bore Ø: 54 mm Height with jaws: 140 mm used, tested ! Dimensions: 200 x 200 x 121 mm

Boring tool, optional accessories WMW TGL 30-1201 ( TGL30-1201 ) Dimensions: 185 x 120 x 55 mm

Manual control valve, manual control valve WMW StH-2 ( STH2, StH 2 ) ND: 1.0 MPa ( 10 bar ) NW: 6 mm with accessories New, with documents ! Dimensions ( Valve ) 135 x 120 x 105 mm Dimensions ( Package ): 150 x 120 x 110 mm

Boring tool, optional accessories WMW TGL 32680 ( TGL32680 ) shank: Ø 20 mm Adapter: Ø 8, 10, 12 mm Dimensions: 185 x 120 x 55 mm

Control unit, combined control unit for pneumatic clamping devices WMW, SPEZIAL-WERKZEUGFABRIK ZELLA-MEHLIS St G K04/0412 Nominal pressure: 1 MPa (10 bar) Nominal diameter: 6 mm Wegevenil ORSTA 6-0.0 1 TGL 20705 ED 100 24 V DC used, tested ! Dimensions: 230 x 130 x 180 mm

Centering tip, lathe tip WMW ZN 206 ( ZN206 ) Ø 140 mm MK 6 used, tested ! Dimensions: 380 x 140 x 140 mm

Control unit, combined control unit for pneumatic clamping devices WMW, SPEZIAL-WERKZEUGFABRIK ZELLA-MEHLIS St G K04/0410 Nominal pressure: 10 kp/cm² (10 bar) Nominal diameter: 6 mm Wegevenil ORSTA 6-0.1 TGL 20705 ED 100 220 V AC used, tested ! Dimensions: 230 x 130 x 170 mm

Scribing apparatus WMW D45 751.04.453 New ! Dimensions: 200 x 60 x 60 mm

Control unit, combined control unit for pneumatic clamping devices WMW, SPEZIAL-WERKZEUGFABRIK ZELLA-MEHLIS St GK 04/0400 Nominal pressure: 10 kp/cm² (10 bar) Nominal diameter: 6 mm hand levervenil ORSTA 6-0.1 TGL 20705 used, tested !' Dimensions: 240 x 130 x 240 mm

Tapping Machine WMW, ABW GB2 MK 2 M3 - M8 with inserts Ø 2.5 / 3.5 / 4.0 / 4.5 / 5.5 / 6.0 mm used, tested ! Dimensions: 250 x 95 x 65 mm

Tool grinding machine WMW SWA 200 grinding diameter max Ø 600 mm grinding length max 470 mm table movement longitudinally 470 mm Tool holder MK2 swivel 0-6 °, 90° Speed range: 1260 - 3100 rpm 0,0.0 4 kW 220 / 380 V used, tested ! Dimensions: 1100 x 1100 x 1500 mm

Pneumatic grinder, pneumatic straight grinder WMW type 1804 17000 rpm grinding wheel diameter: Ø 50 mm with approx. 1.6 m connection hose used, tested ! Dimensions: 330 x 50 x 80 mm

Inv. Num. : 8171 Type: UDARA 10 Producer: WMW Created: GO 2019 Parameters: Wire diameter: 3-8 mm Cable length: 150-3000 mm Input power: 7.5 kW Machine weight: 1200 kg

Angle table with adjustable attachment, clamping bracket, T-slot plate WMW - Consists of 2 parts. Clamping surface: 1600 x 850 x 680 / 760 mm Number of grooves: 6 Groove width: 20 / 38 mm Hole spacing at the base: 130 mm Dimensions: 1600 x 850 x 680 / 760 mm

MAX DIAM 250 MAX LENGHT 800

3- Jaw Chuck WMW NILES DHK 200x3 Outer Ø: 200 mm Flange: 155 mm Bore Ø: 60 mm Bolt circle: 175 mm Height with jaws: 125 mm Chuck number: 507 Dimensions: 200 x 200 x 125 mm

MAX DIAM 200

faceplate diameter: 3500 mm turning diameter: 4000 mm centre distance: 16000 mm turning speeds: 0,71-33,5 U/min Rest: 2 tailstock quill taper MT: max. workpiece weight -without tailstock: 6300 kg max. workpiece weight between centres: 18000 kg Plate area: mm total power requirement: 31 kW weight of the machine ca.: 60 t dimensions of the machine ca.: 22x5x4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Saw blade for metal circular saw, segment saw blade WMW Ø 710 mm tooth 6 96 teeth tooth 6 width: 4.0 mm hole holder inner diameter: 80 mm bolt circle of the 4 holes: 160 mm Dimensions: 710 x 710 x 4 mm,

max. wheel diameter: 400 mm gear width: 275 mm max. module: 6 Overall size: 300x330x245 cm weight of the machine ca.: 5,5 t dist. cutter spindle - workpiece spindle: 40/265 mm hob turning speeds: 50-400 U/min Specification: Max wheel diameter: 400 mm Min module: 1 Max module: 6 Table diameter: 370 mm Max wheel diameter: -With counterstay: 340 mm -Without counterstay: 400 mm Max axial offset: 275 mm Max tangential adjustment: 100 mm Tooth helical angle: 45 degrees Max cutter diameter: 145 mm Max hobbing length: 170 mm Hob turning speeds capacity: 63-180 U/min Feeds infinitely variable axial: 0,2-10 mm/U Feeds infinitely variable tangential: 0,1-5 mm/U Radial for spur gears: 0,1-4 mm/U Radial for worm gears: 0,025-1 mm/U Rapid traverse axial: 500 mm/min Rapid traverse tangential: 250 mm/min Radial for spur gears: 400 mm/U Radial for worm gears: 100 mm/U Motor power: 7.4 kW The data for t ...

Hobs, tooth gear cutters for hobbing machine WMW / PWS Type G Module 3 ( Module3 ) HSS / Co TGL 29-8002 Bore Ø 40 mm New !' Dimensions: 110 x 100 x 100 mm

Offer 24177 Specifications: - Tip height 180 mm - Center width 1000 mm - larger circulation – Ø over bed 355 mm - via flat sleds approx. 200 mm - Spindle bore 36 mm - Pick-up cone of the tailstock quill MK 5 - Travel of the tailstock quill 260 mm - Spindle speeds 18 - 1800 rpm -Feeds - Travel of the cross slide approx. 200 mm - Travel of the upper slide approx. 115 mm - Drive 400 V / 5.8 kW - with: - Tailstock, 3-jaw lining, bezel - Steel holder, moving center punch, - Chip tray - Space requirement approx. W 2500 x H 1500 x D 1200 mm - Weight approx. 2100 kg

Hobs, tooth gear milling machine for hobbing machine WMW / PWS type G module 1.5 HSS / Co TGL 29-8002 bore Ø 27 mm New !' Dimensions: 58 x 69 x 69 mm